gvt-fixes-2018-04-03

- fix unhandled vfio ioctl return value (Gerd)
- no-op user interrupt for vGPU (Zhipeng)
- fix ggtt dma unmap (Changbin)
- fix warning in fb decoder (Xiong)
- dmabuf drm_format_mod fix (Tina)
- misc cleanup
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403072835.kltk47gcwy7kuenv@zhen-hp.sh.intel.com

Add drm_format_mod update, which is omitted.

Fixes: e546e281("drm/i915/gvt: Dmabuf support for GVT-g")
Cc: stable@vger.kernel.org
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Much error exist in host dmesg during guest boot up with loca display
enabled.
gvt: vgpu 1: invalid range gmadr 0x0 size 0x0

This error happens when qemu get dmabuf info in case that the virtual
display plane is enabled but its base address is an invalid 0, such
case may be true before guest enable its plane. At this moment, its
state is copied from host where the plane may be enabled.

This patch disable primary/sprite/cursor plane at virtual display
initialization, so intel_vgpu_decode_primary/cursor/sprite could
return early as plane is disabled, then plane base check is skipped and
error message disapper.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Much error message exist in host dmesg when guest boot up with local
display enabled.
[  167.680011] gvt: vgpu 1: invalid range gmadr 0x0 size 0x0
[  167.680013] gvt: vgpu 1: invalid gma address: 0

The second error line duplicate with the first error line, so this
patch remove this redundant error message and make the next error
message much clearer.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Ditto, don't forget ggtt entries during reset.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

We have canceled dma map for ppgtt entries. Also we need to do it for
ggtt entries when them are invalidated.

This can fix task hung issue as:
[13517.791767] INFO: task gvt_service_thr:1081 blocked for more than 120 seconds.
[13517.792584] Not tainted 4.14.15+ #3
[13517.793417] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[13517.794267] gvt_service_thr D 0 1081 2 0x80000000
[13517.795132] Call Trace:
[13517.795996] ? __schedule+0x493/0x77b
[13517.796859] schedule+0x79/0x82
[13517.797740] schedule_preempt_disabled+0x5/0x6
[13517.798614] __mutex_lock.isra.0+0x2b5/0x445
[13517.799504] ? __switch_to_asm+0x24/0x60
[13517.800381] ? intel_gvt_cleanup+0x10/0x10
[13517.801261] ? intel_gvt_schedule+0x19/0x2b9
[13517.802107] intel_gvt_schedule+0x19/0x2b9
[13517.802954] ? intel_gvt_cleanup+0x10/0x10
[13517.803824] gvt_service_thread+0xe3/0x10d
[13517.804704] ? wait_woken+0x68/0x68
[13517.805588] kthread+0x118/0x120
[13517.806478] ? kthread_create_on_node+0x3a/0x3a
[13517.807381] ? call_usermodehelper_exec_async+0x113/0x11a
[13517.808307] ret_from_fork+0x35/0x40

v3: split out ggtt reset case.
v2: also unmap ggtt during reset.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

- Mask mode type garbage from userspace (Ville)

Something went wrong on the misc tree side, but I'll pull the patch directly.

* 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc:
  drm: Fix uabi regression by allowing garbage mode->type from userspace

GVT-g dispatches request to host i915 and depends on i915 notify
ring interrupt mechanism to check completion of request.
For now MI_USER_INTERRUPT in guest requests is passed through
in GVT-g cmd parser and i915 does not use it, which causes
unnecessary interrupt handling in i915.
On the other hand, if several requests from guest are combined into
one request in and contain MI_USER_INTERRUPT in the middle of
combined request. GVT-g still has to wait on the whole request to
complete to inject user interrupts to guest.

This patch makes all the MI_USER_INTERRUPT nop to save some interrupt
handling.

Here is test result to run glmark2 on guest for 10 seconds:
host master interrupts number is reduced from 16021 to 11162
host user interrupts number is reduced from 7936 to 3536

v2:
- revise commit message. (Kevin)
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1466154 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

- GPUVM support for dGPUs
- KFD events support for dGPUs
- Fix live-lock situation when restoring multiple evicted processes
- Fix VM page table allocation on large-bar systems
- Fix for build failure on frv architecture

* tag 'drm-amdkfd-next-2018-03-27' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Use ordered workqueue to restore processes
  drm/amdgpu: Fix acquiring VM on large-BAR systems
  drm/amdkfd: Add module option for testing large-BAR functionality
  drm/amdkfd: Kmap event page for dGPUs
  drm/amdkfd: Add ioctls for GPUVM memory management
  drm/amdkfd: Add TC flush on VMID deallocation for Hawaii
  drm/amdkfd: Allocate CWSR trap handler memory for dGPUs
  drm/amdkfd: Add per-process IDR for buffer handles
  drm/amdkfd: Aperture setup for dGPUs
  drm/amdkfd: Remove limit on number of GPUs
  drm/amdkfd: Populate DRM render device minor
  drm/amdkfd: Create KFD VMs on demand
  drm/amdgpu: Add kfd2kgd interface to acquire an existing VM
  drm/amdgpu: Add helper to turn an existing VM into a compute VM
  drm/amdgpu: Fix initial validation of PD BO for KFD VMs
  drm/amdgpu: Move KFD-specific fields into struct amdgpu_vm
  drm/amdkfd: fix uninitialized variable use
  drm/amdkfd: add missing include of mm.h

Merge tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Display fixes for booting with MST hub lid closed and display
  freezing after hibernation (fd.o bugs 105470 & 105196)
- Fix for a very rare interrupt handling race resulting in GPU hang

* tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915: Fix hibernation with ACPI S0 target state
  drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt
  drm/i915: Specify which engines to reset following semaphore/event lockups
  drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.

Linux 4.16-rc7

This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.

After

commit dd9f31c7
Author: Imre Deak <imre.deak@intel.com>
Date:   Wed Aug 16 17:46:07 2017 +0300

    drm/i915/gen9+: Set same power state before hibernation image
    save/restore

during hibernation/suspend the power domain functionality got disabled,
after which resume could leave it incorrectly disabled if the ACPI
target state was S0 during suspend and i915 was not loaded by the loader
kernel.

This was caused by not considering if we resumed from hibernation as the
condition for power domains reiniting.

Fix this by simply tracking if we suspended power domains during system
suspend and reinit power domains accordingly during resume. This will
result in reiniting power domains always when resuming from hibernation,
regardless of the platform and whether or not i915 is loaded by the
loader kernel.

The reason we didn't catch this earlier is that the enabled/disabled
state of power domains during PMSG_FREEZE/PMSG_QUIESCE is platform
and kernel config dependent: on my SKL the target state is S4
during PMSG_FREEZE and (with the driver loaded in the loader kernel)
S0 during PMSG_QUIESCE. On the reporter's machine it's S0 during
PMSG_FREEZE but (contrary to this) power domains are not initialized
during PMSG_QUIESCE since i915 is not loaded in the loader kernel, or
it's loaded but without the DMC firmware being available.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105196
Reported-and-tested-by: amn-bas@hotmail.com
Fixes: dd9f31c7 ("drm/i915/gen9+: Set same power state before hibernation image save/restore")
Cc: amn-bas@hotmail.com
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322143642.26883-1-imre.deak@intel.com
(cherry picked from commit 0f90603c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

We were relying on the uncached reads when processing the CSB to provide
ourselves with the serialisation with the interrupt handler (so we could
detect new interrupts in the middle of processing the old one). However,
in commit 767a983a ("drm/i915/execlists: Read the context-status HEAD
from the HWSP") those uncached reads were eliminated (on one path at
least) and along with them our serialisation. The result is that we
would very rarely miss notification of a new interrupt and leave a
context-switch unprocessed, hanging the GPU.

Fixes: 767a983a ("drm/i915/execlists: Read the context-status HEAD from the HWSP")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321091027.21034-1-chris@chris-wilson.co.uk
(cherry picked from commit 9153e6b7)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

If the GPU is stuck waiting for an event or for a semaphore, we need to
reset the GPU in order to recover. We have to tell the reset routine
which engines we want reset, but we were still using the old interface
and declaring it as "not-fatal".

Fixes: 14b730fc ("drm/i915/tdr: Prepare error handler to accept mask of hung engines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320100449.1360-1-chris@chris-wilson.co.uk
(cherry picked from commit ca98317b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

If bios sets up an MST output and hardware state readout code sees this is
an SST configuration, when disabling the encoder we end up calling
->post_disable_dp() hook instead of the MST version. Consequently, we write
to the DP_SET_POWER dpcd to set it D3 state. Further along when we try
enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up
the MST hub. This results in continuous link training failures which keep
the system busy delaying boot. We could identify bios MST boot discrepancy
and handle it accordingly but a simple way to solve this is to write to the
DP_SET_POWER dpcd for MST too.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5ea2355a ("drm/i915/mst: Use MST sideband message transactions for dpms control")
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com
(cherry picked from commit ad260ab3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Last pull for 4.17.  Highlights:
- Vega12 support
- A few more bug fixes and cleanups for powerplay

* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (77 commits)
  drm/amd/pp: clean header file hwmgr.h
  drm/amd/pp: use mlck_table.count for array loop index limit
  drm/amdgpu: Add an ATPX quirk for hybrid laptop
  drm/amdgpu: fix spelling mistake: "asssert" -> "assert"
  drm/amd/pp: Add new asic support in pp_psm.c
  drm/amd/pp: Clean up powerplay code on Vega12
  drm/amd/pp: Add smu irq handlers for legacy asics
  drm/amd/pp: Fix set wrong temperature range on smu7
  drm/amdgpu: Don't change preferred domian when fallback GTT v5
  drm/amdgpu: Fix NULL ptr on driver unload due to init failure.
  drm/amdgpu: fix "mitigate workaround for i915"
  drm/amd/pp: Add smu irq handlers in sw_init instand of hw_init
  drm/amd/pp: Refine register_thermal_interrupt function
  drm/amdgpu: Remove wrapper layer of cgs irq handling
  drm/amd/powerplay: Return per DPM level clock
  drm/amd/powerplay: Remove the SOC floor voltage setting
  drm/amdgpu: no job timeout setting on compute queues
  drm/amdgpu: add vega12 pci ids (v2)
  drm/amd/powerplay: add the hw manager for vega12 (v4)
  drm/amd/powerplay: add the smu manager for vega12 (v4)
  ...

Pull dmaengine fix from Vinod Koul:
 "One small fix for stm32-dmamux fixing buffer overflow"

* tag 'dmaengine-fix-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma:
  dmaengine: stm32-dmamux: fix a potential buffer overflow

Pull x86 and PTI fixes from Ingo Molnar:
 "Misc fixes:

   - fix EFI pagetables freeing

   - fix vsyscall pagetable setting on Xen PV guests

   - remove ancient CONFIG_X86_PPRO_FENCE=y - x86 is TSO again

   - fix two binutils (ld) development version related incompatibilities

   - clean up breakpoint handling

   - fix an x86 self-test"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Don't use IST entry for #BP stack
  x86/efi: Free efi_pgd with free_pages()
  x86/vsyscall/64: Use proper accessor to update P4D entry
  x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk
  x86/boot/64: Verify alignment of the LOAD segment
  x86/build/64: Force the linker to use 2MB page size
  selftests/x86/ptrace_syscall: Fix for yet more glibc interference

Pull timer fix from Ingo Molnar:
 "Make posix clock ID usage Spectre-safe"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-timers: Protect posix clock array access against speculation

Pull scheduler fixes from Ingo Molnar:
 "Two sched debug output related fixes: a console output fix and
  formatting fixes"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Adjust newlines for better alignment
  sched/debug: Fix per-task line continuation for console output

Pull perf fixes from Ingo Molnar:
 "Misc kernel side fixes.

  Generic:
   - cgroup events counting fix

  x86:
   - Intel PMU truncated-parameter fix

   - RDPMC fix

   - API naming fix/rename

   - uncore driver big-hardware PCI enumeration fix

   - uncore driver filter constraint fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/cgroup: Fix child event counting bug
  perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on Skylake servers
  perf/x86/intel: Rename confusing 'freerunning PEBS' API and implementation to 'large PEBS'
  perf/x86/intel/uncore: Add missing filter constraint for SKX CHA event
  perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period()
  perf/x86/intel: Disable userspace RDPMC usage for large PEBS

Pull locking fixes from Ingo Molnar:
 "Two fixes: tighten up a jump-labels warning to not trigger on certain
  modules and fix confusing (and non-existent) mutex API documentation"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  jump_label: Disable jump labels in __exit code
  locking/mutex: Improve documentation

Tabs on a console with long lines do not wrap properly, so correctly
account for the line length when computing the tab placement location.
Reported-by: James Holderness <j4_james@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull mqueuefs revert from Eric Biederman:
 "This fixes a regression that came in the merge window for v4.16.

  The problem is that the permissions for mounting and using the
  mqueuefs filesystem are broken. The necessary permission check is
  missing letting people who should not be able to mount mqueuefs mount
  mqueuefs. The field sb->s_user_ns is set incorrectly not allowing the
  mounter of mqueuefs to remount and otherwise have proper control over
  the filesystem.

  Al Viro and I see the path to the necessary fixes differently and I am
  not even certain at this point he actually sees all of the necessary
  fixes. Given a couple weeks we can probably work something out but I
  don't see the review being resolved in time for the final v4.16. I
  don't want v4.16 shipping with a nasty regression. So unfortunately I
  am sending a revert"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  Revert "mqueue: switch to on-demand creation of internal mount"

This reverts commit 36735a6a.

Aleksa Sarai <asarai@suse.de> writes:
> [REGRESSION v4.16-rc6] [PATCH] mqueue: forbid unprivileged user access to internal mount
>
> Felix reported weird behaviour on 4.16.0-rc6 with regards to mqueue[1],
> which was introduced by 36735a6a ("mqueue: switch to on-demand
> creation of internal mount").
>
> Basically, the reproducer boils down to being able to mount mqueue if
> you create a new user namespace, even if you don't unshare the IPC
> namespace.
>
> Previously this was not possible, and you would get an -EPERM. The mount
> is the *host* mqueue mount, which is being cached and just returned from
> mqueue_mount(). To be honest, I'm not sure if this is safe or not (or if
> it was intentional -- since I'm not familiar with mqueue).
>
> To me it looks like there is a missing permission check. I've included a
> patch below that I've compile-tested, and should block the above case.
> Can someone please tell me if I'm missing something? Is this actually
> safe?
>
> [1]: https://github.com/docker/docker/issues/36674

The issue is a lot deeper than a missing permission check.  sb->s_user_ns
was is improperly set as well.  So in addition to the filesystem being
mounted when it should not be mounted, so things are not allow that should
be.

We are practically to the release of 4.16 and there is no agreement between
Al Viro and myself on what the code should looks like to fix things properly.
So revert the code to what it was before so that we can take our time
and discuss this properly.

Fixes: 36735a6a ("mqueue: switch to on-demand creation of internal mount")
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Reported-by: Aleksa Sarai <asarai@suse.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull pin control fixes from Linus Walleij:
 "Two fixes for pin control for v4.16:

   - Renesas SH-PFC: remove a duplicate clkout pin which was causing
     crashes

   - fix Samsung out of bounds exceptions"

* tag 'pinctrl-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: samsung: Validate alias coming from DT
  pinctrl: sh-pfc: r8a7795: remove duplicate of CLKOUT pin in pinmux_pins[]

Pull kprobe fixes from Steven Rostedt:
 "The documentation for kprobe events says that symbol offets can take
  both a + and - sign to get to befor and after the symbol address.

  But in actuality, the code does not support the minus. This fixes that
  issue, and adds a few more selftests to kprobe events"

* tag 'trace-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests: ftrace: Add a testcase for probepoint
  selftests: ftrace: Add a testcase for string type with kprobe_event
  selftests: ftrace: Add probe event argument syntax testcase
  tracing: probeevent: Fix to support minus offset from symbol

There's nothing IST-worthy about #BP/int3.  We don't allow kprobes
in the small handful of places in the kernel that run at CPL0 with
an invalid stack, and 32-bit kernels have used normal interrupt
gates for #BP forever.

Furthermore, we don't allow kprobes in places that have usergs while
in kernel mode, so "paranoid" is also unnecessary.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org

Restoring multiple processes concurrently can lead to live-locks
where each process prevents the other from validating all its BOs.

v2: fix duplicate check of same variable
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

On large-BAR systems the VM page tables for compute are accessed by
the CPU. Always allow CPU access to the page directory so that it can
be used later by the CPU when a VM is converted to a compute VM.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

The efi_pgd is allocated as PGD_ALLOCATION_ORDER pages and therefore must
also be freed as PGD_ALLOCATION_ORDER pages with free_pages().

Fixes: d9e9a641 ("x86/mm/pti: Allocate a separate user PGD")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1521746333-19593-1-git-send-email-longman@redhat.com

Pull MIPS fixes from James Hogan:
 "Another miscellaneous pile of MIPS fixes for 4.16:

   - lantiq: fixes for clocks and Amazon SE (4.14)

   - ralink: fix booting on MT7621 (4.5)

   - ralink: fix halt (3.9)"

* tag 'mips_fixes_4.16_5' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
  MIPS: ralink: Fix booting on MT7621
  MIPS: ralink: Remove ralink_halt()
  MIPS: lantiq: ase: Enable MFD_SYSCON
  MIPS: lantiq: Enable AHB Bus for USB
  MIPS: lantiq: Fix Danube USB clock

Pull VFIO fix from Alex Williamson:
 "Revert masking INTx where it cannot be enabled - it plays poorly with
  SR-IOV VFs and presumes DisINTx support"

* tag 'vfio-v4.16-rc7' of git://github.com/awilliam/linux-vfio:
  Revert: "vfio-pci: Mask INTx if a device is not capabable of enabling it"

Pull MTD fixes from Boris Brezillon:

 - Fix several problems in the fsl_ifc NAND controller driver

 - Fix misuse of mtd_ooblayout_ecc() in mtdchar.c

* tag 'mtd/fixes-for-4.16-rc7' of git://git.infradead.org/linux-mtd:
  mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0
  mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0
  mtd: nand: fsl_ifc: Fix nand waitfunc return value
  mtdchar: fix usage of mtd_ooblayout_ecc()

Pull staging/IIO fixes from Greg KH:
 "Here are a few small staging and IIO fixes for various reported
  issues.

  All of them are tiny, the majority being iio driver fixes for small
  issues, and one staging driver fix for a memory corruption issue.

  All have been in linux-next with no reported issues"

* tag 'staging-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ncpfs: memory corruption in ncp_read_kernel()
  iio: st_pressure: st_accel: pass correct platform data to init
  Revert "iio: accel: st_accel: remove redundant pointer pdata"
  iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock()
  dt-bindings: iio: adc: sd-modulator: fix io-channel-cells
  iio: adc: stm32-dfsdm: fix multiple channel initialization
  iio: adc: stm32-dfsdm: fix clock source selection
  iio: adc: stm32-dfsdm: fix call to stop channel
  iio: adc: stm32-dfsdm: fix compatible data use
  iio: chemical: ccs811: Corrected firmware boot/application mode transition

Pull hyperv fix from Greg KH:
 "This is a single hyperv bugfix for 4.16-rc7.

  It resolves an issue with the ring-buffer signaling to resolve
  reported problems.

  It's been in linux-next for a while now with no reported issues"

* tag 'char-misc-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Drivers: hv: vmbus: Fix ring buffer signaling

Pull media fixes from Mauro Carvalho Chehab:
 "Three fixes:

   - dvb: fix a Kconfig typo on a help text

   - tegra-cec: reset rx_buf_cnt when start bit detected

   - rc: lirc does not use LIRC_CAN_SEND_SCANCODE feature"

* tag 'media/v4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: dvb: fix a Kconfig typo
  media: tegra-cec: reset rx_buf_cnt when start bit detected
  media: rc: lirc does not use LIRC_CAN_SEND_SCANCODE feature

Pull sound fixes from Takashi Iwai:
 "Things look calming down, but people were still busy to plaster over
  small holes:

   - Two fixes to harden against races in aloop driver

   - A correction of a long-standing bug in USB-audio UAC2 processing
     unit parser

   - As usual suspects, HD-audio: a workaround for Coffee Lake
     controller and a few other device-specific fixes

  All small and for stable"

* tag 'sound-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: aloop: Fix access to not-yet-ready substream via cable
  ALSA: aloop: Sync stale timer before release
  ALSA: hda/realtek - Fix speaker no sound after system resume
  ALSA: hda/realtek - Fix Dell headset Mic can't record
  ALSA: hda - Force polling mode on CFL for fixing codec communication
  ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit
  ALSA: hda/realtek - Always immediately update mute LED with pin VREF