- 01 May, 2019 4 commits
-
-
Xin Long authored
Ying triggered a call trace when doing an asconf testing: BUG: scheduling while atomic: swapper/12/0/0x10000100 Call Trace: <IRQ> [<ffffffffa4375904>] dump_stack+0x19/0x1b [<ffffffffa436fcaf>] __schedule_bug+0x64/0x72 [<ffffffffa437b93a>] __schedule+0x9ba/0xa00 [<ffffffffa3cd5326>] __cond_resched+0x26/0x30 [<ffffffffa437bc4a>] _cond_resched+0x3a/0x50 [<ffffffffa3e22be8>] kmem_cache_alloc_node+0x38/0x200 [<ffffffffa423512d>] __alloc_skb+0x5d/0x2d0 [<ffffffffc0995320>] sctp_packet_transmit+0x610/0xa20 [sctp] [<ffffffffc098510e>] sctp_outq_flush+0x2ce/0xc00 [sctp] [<ffffffffc098646c>] sctp_outq_uncork+0x1c/0x20 [sctp] [<ffffffffc0977338>] sctp_cmd_interpreter.isra.22+0xc8/0x1460 [sctp] [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp] [<ffffffffc099443d>] sctp_primitive_ASCONF+0x3d/0x50 [sctp] [<ffffffffc0977384>] sctp_cmd_interpreter.isra.22+0x114/0x1460 [sctp] [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp] [<ffffffffc097b3a4>] sctp_assoc_bh_rcv+0xf4/0x1b0 [sctp] [<ffffffffc09840f1>] sctp_inq_push+0x51/0x70 [sctp] [<ffffffffc099732b>] sctp_rcv+0xa8b/0xbd0 [sctp] As it shows, the first sctp_do_sm() running under atomic context (NET_RX softirq) invoked sctp_primitive_ASCONF() that uses GFP_KERNEL flag later, and this flag is supposed to be used in non-atomic context only. Besides, sctp_do_sm() was called recursively, which is not expected. Vlad tried to fix this recursive call in Commit c0786693 ("sctp: Fix oops when sending queued ASCONF chunks") by introducing a new command SCTP_CMD_SEND_NEXT_ASCONF. But it didn't work as this command is still used in the first sctp_do_sm() call, and sctp_primitive_ASCONF() will be called in this command again. To avoid calling sctp_do_sm() recursively, we send the next queued ASCONF not by sctp_primitive_ASCONF(), but by sctp_sf_do_prm_asconf() in the 1st sctp_do_sm() directly. Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jan Kiszka authored
Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Fix ReST underline warning: ./Documentation/networking/netdev-FAQ.rst:135: WARNING: Title underline too short. Q: I made changes to only a few patches in a patch series should I resend only those changed? -------------------------------------------------------------------------------------------- Fixes: ffa91253 ("Documentation: networking: Update netdev-FAQ regarding patches") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
We had many syzbot reports that seem to be caused by use-after-free of struct fib6_info. ip6_dst_destroy(), fib6_drop_pcpu_from() and rt6_remove_exception() are writers vs rt->from, and use non consistent synchronization among themselves. Switching to xchg() will solve the issues with no possible lockdep issues. BUG: KASAN: user-memory-access in atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline] BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:294 [inline] BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:292 [inline] BUG: KASAN: user-memory-access in fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline] BUG: KASAN: user-memory-access in fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960 Write of size 4 at addr 0000000000ffffb4 by task syz-executor.1/7649 CPU: 0 PID: 7649 Comm: syz-executor.1 Not tainted 5.1.0-rc6+ #183 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 kasan_report.cold+0x5/0x40 mm/kasan/report.c:321 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 kasan_check_write+0x14/0x20 mm/kasan/common.c:108 atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline] fib6_info_release include/net/ip6_fib.h:294 [inline] fib6_info_release include/net/ip6_fib.h:292 [inline] fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline] fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960 fib6_del_route net/ipv6/ip6_fib.c:1813 [inline] fib6_del+0xac2/0x10a0 net/ipv6/ip6_fib.c:1844 fib6_clean_node+0x3a8/0x590 net/ipv6/ip6_fib.c:2006 fib6_walk_continue+0x495/0x900 net/ipv6/ip6_fib.c:1928 fib6_walk+0x9d/0x100 net/ipv6/ip6_fib.c:1976 fib6_clean_tree+0xe0/0x120 net/ipv6/ip6_fib.c:2055 __fib6_clean_all+0x118/0x2a0 net/ipv6/ip6_fib.c:2071 fib6_clean_all+0x2b/0x40 net/ipv6/ip6_fib.c:2082 rt6_sync_down_dev+0x134/0x150 net/ipv6/route.c:4057 rt6_disable_ip+0x27/0x5f0 net/ipv6/route.c:4062 addrconf_ifdown+0xa2/0x1220 net/ipv6/addrconf.c:3705 addrconf_notify+0x19a/0x2260 net/ipv6/addrconf.c:3630 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1753 call_netdevice_notifiers_extack net/core/dev.c:1765 [inline] call_netdevice_notifiers net/core/dev.c:1779 [inline] dev_close_many+0x33f/0x6f0 net/core/dev.c:1522 rollback_registered_many+0x43b/0xfd0 net/core/dev.c:8177 rollback_registered+0x109/0x1d0 net/core/dev.c:8242 unregister_netdevice_queue net/core/dev.c:9289 [inline] unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9282 unregister_netdevice include/linux/netdevice.h:2658 [inline] __tun_detach+0xd5b/0x1000 drivers/net/tun.c:727 tun_detach drivers/net/tun.c:744 [inline] tun_chr_close+0xe0/0x180 drivers/net/tun.c:3443 __fput+0x2e5/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x90a/0x2fa0 kernel/exit.c:876 do_group_exit+0x135/0x370 kernel/exit.c:980 __do_sys_exit_group kernel/exit.c:991 [inline] __se_sys_exit_group kernel/exit.c:989 [inline] __x64_sys_exit_group+0x44/0x50 kernel/exit.c:989 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffeafc2a6a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 000000000000001c RCX: 0000000000458da9 RDX: 0000000000412a80 RSI: 0000000000a54ef0 RDI: 0000000000000043 RBP: 00000000004be552 R08: 000000000000000c R09: 000000000004c0d1 R10: 0000000002341940 R11: 0000000000000246 R12: 00000000ffffffff R13: 00007ffeafc2a7f0 R14: 000000000004c065 R15: 00007ffeafc2a800 Fixes: a68886a6 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
- 30 Apr, 2019 9 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2019-04-30' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.1 Third set of fixes for 5.1. iwlwifi * fix an oops when creating debugfs entries * fix bug when trying to capture debugging info while in rfkill * prevent potential uninitialized memory dumps into debugging logs * fix some initialization parameters for AX210 devices * fix an oops with non-MSIX devices * fix an oops when we receive a packet with bogus lengths * fix a bug that prevented 5350 devices from working * fix a small merge damage from the previous series mwifiex * fig regression with resume on SDIO ath10k * fix locking problem with crashdump * fix warnings during suspend and resume Also note that this pull conflicts with net-next. And I want to emphasie that it's really net-next, so when you pull this to net tree it should go without conflicts. Stephen reported the conflict here: https://lkml.kernel.org/r/20190429115338.5decb50b@canb.auug.org.au In iwlwifi oddly commit 154d4899 adds the IS_ERR_OR_NULL() in wireless-drivers but commit c9af7528 removes the whole check in wireless-drivers-next. The fix is easy, just drop the whole check for mvmvif->dbgfs_dir in iwlwifi/mvm/debugfs-vif.c, it's unneeded anyway. ==================== Signed-off-by:
-
Eric Dumazet authored
Before taking a refcount on a rcu protected structure, we need to make sure the refcount is not zero. syzbot reported : refcount_t: increment on 0; use-after-free. WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked lib/refcount.c:156 [inline] WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked+0x61/0x70 lib/refcount.c:154 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 23533 Comm: syz-executor.2 Not tainted 5.1.0-rc7+ #93 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:179 [inline] fixup_bug arch/x86/kernel/traps.c:174 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:refcount_inc_checked lib/refcount.c:156 [inline] RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:154 Code: 1d 98 2b 2a 06 31 ff 89 de e8 db 2c 40 fe 84 db 75 dd e8 92 2b 40 fe 48 c7 c7 20 7a a1 87 c6 05 78 2b 2a 06 01 e8 7d d9 12 fe <0f> 0b eb c1 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 RSP: 0018:ffff888069f0fba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000f353 RSI: ffffffff815afcb6 RDI: ffffed100d3e1f67 RBP: ffff888069f0fbb8 R08: ffff88809b1845c0 R09: ffffed1015d23ef1 R10: ffffed1015d23ef0 R11: ffff8880ae91f787 R12: ffff8880a8f26968 R13: 0000000000000004 R14: dffffc0000000000 R15: ffff8880a49a6440 l2tp_tunnel_inc_refcount net/l2tp/l2tp_core.h:240 [inline] l2tp_tunnel_get+0x250/0x580 net/l2tp/l2tp_core.c:173 pppol2tp_connect+0xc00/0x1c70 net/l2tp/l2tp_ppp.c:702 __sys_connect+0x266/0x330 net/socket.c:1808 __do_sys_connect net/socket.c:1819 [inline] __se_sys_connect net/socket.c:1816 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1816 Fixes: 54652eb1 ("l2tp: hold tunnel while looking up sessions in l2tp_netlink") Signed-off-by:
-
YueHaibing authored
If register_snap_client fails in atalk_init, error code should be set, otherwise it will triggers NULL pointer dereference while unloading module. Fixes: 9804501f ("appletalk: Fix potential NULL pointer dereference in unregister_snap_client") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Dan Carpenter authored
The "fs->location" is a u32 that comes from the user in ethtool_set_rxnfc(). We can't pass unclamped values to test_bit() or it results in an out of bounds access beyond the end of the bitmap. Fixes: 7318166c ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David Howells authored
In rxrpc_destroy_all_calls(), there are two phases: (1) make sure the ->calls list is empty, emitting error messages if not, and (2) wait for the RCU cleanup to happen on outstanding calls (ie. ->nr_calls becomes 0). To avoid taking the call_lock, the function prechecks ->calls and if empty, it returns to avoid taking the lock - this is wrong, however: it still needs to go and do the second phase and wait for ->nr_calls to become 0. Without this, the rxrpc_net struct may get deallocated before we get to the RCU cleanup for the last calls. This can lead to: Slab corruption (Not tainted): kmalloc-16k start=ffff88802b178000, len=16384 050: 6b 6b 6b 6b 6b 6b 6b 6b 61 6b 6b 6b 6b 6b 6b 6b kkkkkkkkakkkkkkk Note the "61" at offset 0x58. This corresponds to the ->nr_calls member of struct rxrpc_net (which is >9k in size, and thus allocated out of the 16k slab). Fix this by flipping the condition on the if-statement, putting the locked section inside the if-body and dropping the return from there. The function will then always go on to wait for the RCU cleanup on outstanding calls. Fixes: 2baec2c3 ("rxrpc: Support network namespacing") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2019-04-30 1) Fix an out-of-bound array accesses in __xfrm_policy_unlink. From YueHaibing. 2) Reset the secpath on failure in the ESP GRO handlers to avoid dereferencing an invalid pointer on error. From Myungho Jung. 3) Add and revert a patch that tried to add rcu annotations to netns_xfrm. From Su Yanjun. 4) Wait for rcu callbacks before freeing xfrm6_tunnel_spi_kmem. From Su Yanjun. 5) Fix forgotten vti4 ipip tunnel deregistration. From Jeremy Sowden: 6) Remove some duplicated log messages in vti4. From Jeremy Sowden. 7) Don't use IPSEC_PROTO_ANY when flushing states because this will flush only IPsec portocol speciffic states. IPPROTO_ROUTING states may remain in the lists when doing net exit. Fix this by replacing IPSEC_PROTO_ANY with zero. From Cong Wang. 8) Add length check for UDP encapsulation to fix "Oversized IP packet" warnings on receive side. From Sabrina Dubroca. 9) Fix xfrm interface lookup when the interface is associated to a vrf layer 3 master device. From Martin Willi. 10) Reload header pointers after pskb_may_pull() in _decode_session4(), otherwise we may read from uninitialized memory. 11) Update the documentation about xfrm[46]_gc_thresh, it is not used anymore after the flowcache removal. From Nicolas Dichtel. ==================== Signed-off-by: -
Eric Dumazet authored
syzbot was able to catch a use-after-free read in pid_nr_ns() [1] ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started. [1] BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407 Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087 CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 pid_nr_ns+0x128/0x140 kernel/pid.c:407 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794 seq_read+0xad3/0x1130 fs/seq_file.c:268 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227 do_loop_readv_writev fs/read_write.c:701 [inline] do_loop_readv_writev fs/read_write.c:688 [inline] do_iter_read+0x4a9/0x660 fs/read_write.c:922 vfs_readv+0xf0/0x160 fs/read_write.c:984 kernel_readv fs/splice.c:358 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:413 do_splice_to+0x12a/0x190 fs/splice.c:876 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062 do_sendfile+0x597/0xd00 fs/read_write.c:1443 __do_sys_sendfile64 fs/read_write.c:1498 [inline] __se_sys_sendfile64 fs/read_write.c:1490 [inline] __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9 RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4 R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff Allocated by task 17543: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 alloc_pid+0x55/0x8f0 kernel/pid.c:168 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932 copy_process kernel/fork.c:1709 [inline] _do_fork+0x257/0xfd0 kernel/fork.c:2226 __do_sys_clone kernel/fork.c:2333 [inline] __se_sys_clone kernel/fork.c:2327 [inline] __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7789: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 put_pid.part.0+0x111/0x150 kernel/pid.c:111 put_pid+0x20/0x30 kernel/pid.c:105 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 The buggy address belongs to the object at ffff888094012a00 which belongs to the cache pid_2 of size 88 The buggy address is located 4 bytes inside of 88-byte region [ffff888094012a00, ffff888094012a58) The buggy address belongs to the page: page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080 raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc >ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ^ ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc Fixes: 4f82f457 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t") Signed-off-by: -
Stephen Suryaputra authored
When there is no route to an IPv6 dest addr, skb_dst(skb) points to loopback dev in the case of that the IP6CB(skb)->iif is enslaved to a vrf. This causes Ip6InNoRoutes to be incremented on the loopback dev. This also causes the lookup to fail on icmpv6_send() and the dest unreachable to not sent and Ip6OutNoRoutes gets incremented on the loopback dev. To reproduce: * Gateway configuration: ip link add dev vrf_258 type vrf table 258 ip link set dev enp0s9 master vrf_258 ip addr add 66:1/64 dev enp0s9 ip -6 route add unreachable default metric 8192 table 258 sysctl -w net.ipv6.conf.all.forwarding=1 sysctl -w net.ipv6.conf.enp0s9.forwarding=1 * Sender configuration: ip addr add 66::2/64 dev enp0s9 ip -6 route add default via 66::1 and ping 67::1 for example from the sender. Fix this by counting on the original netdev and reset the skb dst to force a fresh lookup. v2: Fix typo of destination address in the repro steps. v3: Simplify the loopback check (per David Ahern) and use reverse Christmas tree format (per David Miller). Signed-off-by:Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by:
-
Eric Dumazet authored
Richard and Bruno both reported that my commit added a bug, and Bruno was able to determine the problem came when a segment wih a FIN packet was coalesced to a prior one in tcp backlog queue. It turns out the header prediction in tcp_rcv_established() looks back to TCP headers in the packet, not in the metadata (aka TCP_SKB_CB(skb)->tcp_flags) The fast path in tcp_rcv_established() is not supposed to handle a FIN flag (it does not call tcp_fin()) Therefore we need to make sure to propagate the FIN flag, so that the coalesced packet does not go through the fast path, the same than a GRO packet carrying a FIN flag. While we are at it, make sure we do not coalesce packets with RST or SYN, or if they do not have ACK set. Many thanks to Richard and Bruno for pinpointing the bad commit, and to Richard for providing a first version of the fix. Fixes: 4f693b55 ("tcp: implement coalescing on backlog queue") Signed-off-by:
Richard Purdie <richard.purdie@linuxfoundation.org> Reported-by:
Bruno Prémont <bonbons@sysophe.eu> Signed-off-by:
-
- 29 Apr, 2019 6 commits
-
-
Willem de Bruijn authored
A request for a flowlabel fails in process or user exclusive mode must fail if the caller pid or uid does not match. Invert the test. Previously, the test was unsafe wrt PID recycling, but indeed tested for inequality: fl1->owner != fl->owner Fixes: 4f82f457 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'ieee802154-for-davem-2019-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== ieee802154 for net 2019-04-25 An update from ieee802154 for your *net* tree. Another fix from Kangjie Lu to ensure better checking regmap updates in the mcr20a driver. Nothing else I have pending for the final release. If there are any problems let me know. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git fixes for 5.1. Major changes: ath10k * fix locking problem with crashdump * fix warnings during suspend and resume
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2019-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== * fix use-after-free in mac80211 TXQs * fix RX STBC byte order * fix debugfs rename crashing due to ERR_PTR() * fix missing regulatory notification ==================== Signed-off-by:
-
Rafael J. Wysocki authored
ath10k_mac_vif_chan() always returns an error for the given vif during system-wide resume which reliably triggers two WARN_ON()s in ath10k_bss_info_changed() and they are not particularly useful in that code path, so drop them. Tested: QCA6174 hw3.2 PCI with WLAN.RM.2.0-00180-QCARMSWPZ-1 Tested: QCA6174 hw3.2 SDIO with WLAN.RMH.4.4.1-00007-QCARMSWP-1 Fixes: cd93b83a ("ath10k: support for multicast rate control") Fixes: f279294e ("ath10k: add support for configuring management packet rate") Cc: stable@vger.kernel.org Reviewed-by:
Brian Norris <briannorris@chromium.org> Tested-by:
Claire Chang <tientzu@chromium.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Brian Norris authored
Commit 25733c4e ("ath10k: pci: use mutex for diagnostic window CE polling") introduced a regression where we try to sleep (grab a mutex) in an atomic context: [ 233.602619] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254 [ 233.602626] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 [ 233.602636] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.1.0-rc2 #4 [ 233.602642] Hardware name: Google Scarlet (DT) [ 233.602647] Call trace: [ 233.602663] dump_backtrace+0x0/0x11c [ 233.602672] show_stack+0x20/0x28 [ 233.602681] dump_stack+0x98/0xbc [ 233.602690] ___might_sleep+0x154/0x16c [ 233.602696] __might_sleep+0x78/0x88 [ 233.602704] mutex_lock+0x2c/0x5c [ 233.602717] ath10k_pci_diag_read_mem+0x68/0x21c [ath10k_pci] [ 233.602725] ath10k_pci_diag_read32+0x48/0x74 [ath10k_pci] [ 233.602733] ath10k_pci_dump_registers+0x5c/0x16c [ath10k_pci] [ 233.602741] ath10k_pci_fw_crashed_dump+0xb8/0x548 [ath10k_pci] [ 233.602749] ath10k_pci_napi_poll+0x60/0x128 [ath10k_pci] [ 233.602757] net_rx_action+0x140/0x388 [ 233.602766] __do_softirq+0x1b0/0x35c [...] ath10k_pci_fw_crashed_dump() is called from NAPI contexts, and firmware memory dumps are retrieved using the diag memory interface. A simple reproduction case is to run this on QCA6174A / WLAN.RM.4.4.1-00132-QCARMSWP-1, which happens to be a way to b0rk the firmware: dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value bs=4K count=1 of=/dev/null (NB: simulated firmware crashes, via debugfs, don't trigger firmware dumps.) The fix is to move the crash-dump into a workqueue context, and avoid relying on 'data_lock' for most mutual exclusion. We only keep using it here for protecting 'fw_crash_counter', while the rest of the coredump buffers are protected by a new 'dump_mutex'. I've tested the above with simulated firmware crashes (debugfs 'reset' file), real firmware crashes (the 'dd' command above), and a variety of reboot and suspend/resume configurations on QCA6174A. Reported here: http://lkml.kernel.org/linux-wireless/20190325202706.GA68720@google.com Fixes: 25733c4e ("ath10k: pci: use mutex for diagnostic window CE polling") Signed-off-by:
-
- 28 Apr, 2019 8 commits
-
-
Kalle Valo authored
Merge tag 'iwlwifi-for-kalle-2019-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Fourth batch of patches intended for v5.1 * Fix an oops when we receive a packet with bogus lengths; * Fix a bug that prevented 5350 devices from working; * Fix a small merge damage from the previous series;
-
Luca Coelho authored
When I rebased Greg's patch, I accidentally left the old if block that was already there. Remove it. Fixes: 154d4899 ("iwlwifi: mvm: properly check debugfs dentry before using it") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Emmanuel Grumbach authored
We introduced a bug that prevented this old device from working. The driver would simply not be able to complete the INIT flow while spewing this warning: CSR addresses aren't configured WARNING: CPU: 0 PID: 819 at drivers/net/wireless/intel/iwlwifi/pcie/drv.c:917 iwl_pci_probe+0x160/0x1e0 [iwlwifi] Cc: stable@vger.kernel.org # v4.18+ Fixes: a8cbb46f ("iwlwifi: allow different csr flags for different device families") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: c8f1b51e ("iwlwifi: allow different csr flags for different device families") Signed-off-by:
-
Luca Coelho authored
We don't check for the validity of the lengths in the packet received from the firmware. If the MPDU length received in the rx descriptor is too short to contain the header length and the crypt length together, we may end up trying to copy a negative number of bytes (headlen - hdrlen < 0) which will underflow and cause us to try to copy a huge amount of data. This causes oopses such as this one: BUG: unable to handle kernel paging request at ffff896be2970000 PGD 5e201067 P4D 5e201067 PUD 5e205067 PMD 16110d063 PTE 8000000162970161 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 1824 Comm: irq/134-iwlwifi Not tainted 4.19.33-04308-geea41cf4930f #1 Hardware name: [...] RIP: 0010:memcpy_erms+0x6/0x10 Code: 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe RSP: 0018:ffffa4630196fc60 EFLAGS: 00010287 RAX: ffff896be2924618 RBX: ffff896bc8ecc600 RCX: 00000000fffb4610 RDX: 00000000fffffff8 RSI: ffff896a835e2a38 RDI: ffff896be2970000 RBP: ffffa4630196fd30 R08: ffff896bc8ecc600 R09: ffff896a83597000 R10: ffff896bd6998400 R11: 000000000200407f R12: ffff896a83597050 R13: 00000000fffffff8 R14: 0000000000000010 R15: ffff896a83597038 FS: 0000000000000000(0000) GS:ffff896be8280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff896be2970000 CR3: 000000005dc12002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: iwl_mvm_rx_mpdu_mq+0xb51/0x121b [iwlmvm] iwl_pcie_rx_handle+0x58c/0xa89 [iwlwifi] iwl_pcie_irq_rx_msix_handler+0xd9/0x12a [iwlwifi] irq_thread_fn+0x24/0x49 irq_thread+0xb0/0x122 kthread+0x138/0x140 ret_from_fork+0x1f/0x40 Fix that by checking the lengths for correctness and trigger a warning to show that we have received wrong data. Signed-off-by: -
Paolo Abeni authored
Currently, the UDP GRO code path does bad things on some edge conditions - Aggregation can happen even on packet with different lengths. Fix the above by rewriting the 'complete' condition for GRO packets. While at it, note explicitly that we allow merging the first packet per burst below gso_size. Reported-by:
Sean Tong <seantong114@gmail.com> Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net/tls: fix data copies in tls_device_reencrypt() This series fixes the tls_device_reencrypt() which is broken if record starts in the frags of the message skb. ==================== Signed-off-by: -
Jakub Kicinski authored
Fragments may contain data from other records so we have to account for that when we calculate the destination and max length of copy we can perform. Note that 'offset' is the offset within the message, so it can't be passed as offset within the frag.. Here skb_store_bits() would have realised the call is wrong and simply not copy data. Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
There is no guarantee the record starts before the skb frags. If we don't check for this condition copy amount will get negative, leading to reads and writes to random memory locations. Familiar hilarity ensues. Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by:
-
- 27 Apr, 2019 7 commits
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Misc. bug fixes. 6 miscellaneous bug fixes covering several issues in error code paths, a setup issue for statistics DMA, and an improvement for setting up multicast address filters. Please queue these for stable as well. Patch #5 (bnxt_en: Fix statistics context reservation logic) is for the most recent 5.0 stable only. Thanks. ==================== Signed-off-by: -
Michael Chan authored
In bnxt_rx_pkt(), if the driver encounters BD errors, it will recycle the buffers and jump to the end where the uninitailized variable "len" is referenced. Fix it by adding a new jump label that will skip the length update. This is the most correct fix since the length may not be valid when we get this type of error. Fixes: 6a8788f2 ("bnxt_en: add support for software dynamic interrupt moderation") Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
-
Michael Chan authored
In an earlier commit that fixes the number of stats contexts to reserve for the RDMA driver, we added a function parameter to pass in the number of stats contexts to all the relevant functions. The passed in parameter should have been used to set the enables field of the firmware message. Fixes: 780baad4 ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.") Signed-off-by:
-
Michael Chan authored
If driver determines that extended TX port statistics are not supported or allocation of the data structure fails, make sure to pass 0 TX stats size to firmware to disable it. The firmware returned TX stats size should also be set to 0 for consistency. This will prevent bnxt_get_ethtool_stats() from accessing the NULL TX stats pointer in case there is mismatch between firmware and driver. Fixes: 36e53349 ("bnxt_en: Add additional extended port statistics.") Signed-off-by:
-
Michael Chan authored
If we encounter errors during open and proceed to clean up, bnxt_hwrm_ring_free() may crash if the rings we try to free have never been allocated. bnxt_cp_ring_for_rx() or bnxt_cp_ring_for_tx() may reference pointers that have not been allocated. Fix it by checking for valid fw_ring_id first before calling bnxt_cp_ring_for_rx() or bnxt_cp_ring_for_tx(). Fixes: 2c61d211 ("bnxt_en: Add helper functions to get firmware CP ring ID.") Signed-off-by:
-
Vasundhara Volam authored
In the bnxt_init_one() error path, short FW command request memory is not freed. This patch fixes it. Fixes: e605db80 ("bnxt_en: Support for Short Firmware Message") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Michael Chan authored
The driver builds a list of multicast addresses and sends it to the firmware when the driver's ndo_set_rx_mode() is called. In rare cases, the firmware can fail this call if internal resources to add multicast addresses are exhausted. In that case, we should try the call again by setting the ALL_MCAST flag which is more guaranteed to succeed. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
-
- 26 Apr, 2019 6 commits
-
-
Andrew Lunn authored
marvell_get_sset_count() returns how many statistics counters there are. If the PHY supports fibre, there are 3, otherwise two. marvell_get_strings() does not make this distinction, and always returns 3 strings. This then often results in writing past the end of the buffer for the strings. Fixes: 2170fef7 ("Marvell phy: add field to get errors from fiber link.") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Marcel Holtmann authored
When allocating the next family->id it makes more sense to use idr_alloc_cyclic to avoid re-using a previously used family->id as much as possible. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Bjørn Mork authored
Adding device entries found in vendor modified versions of this driver. Function maps for some of the devices follow: WNC D16Q1, D16Q5, D18Q1 LTE CAT3 module (1435:0918) MI_00 Qualcomm HS-USB Diagnostics MI_01 Android Debug interface MI_02 Qualcomm HS-USB Modem MI_03 Qualcomm Wireless HS-USB Ethernet Adapter MI_04 Qualcomm Wireless HS-USB Ethernet Adapter MI_05 Qualcomm Wireless HS-USB Ethernet Adapter MI_06 USB Mass Storage Device T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=0918 Rev= 2.32 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms WNC D18 LTE CAT3 module (1435:d182) MI_00 Qualcomm HS-USB Diagnostics MI_01 Androd Debug interface MI_02 Qualcomm HS-USB Modem MI_03 Qualcomm HS-USB NMEA MI_04 Qualcomm Wireless HS-USB Ethernet Adapter MI_05 Qualcomm Wireless HS-USB Ethernet Adapter MI_06 USB Mass Storage Device ZM8510/ZM8620/ME3960 (19d2:0396) MI_00 ZTE Mobile Broadband Diagnostics Port MI_01 ZTE Mobile Broadband AT Port MI_02 ZTE Mobile Broadband Modem MI_03 ZTE Mobile Broadband NDIS Port (qmi_wwan) MI_04 ZTE Mobile Broadband ADB Port ME3620_X (19d2:1432) MI_00 ZTE Diagnostics Device MI_01 ZTE UI AT Interface MI_02 ZTE Modem Device MI_03 ZTE Mobile Broadband Network Adapter MI_04 ZTE Composite ADB Interface Reported-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Fabien Dessenne authored
Manage the -EPROBE_DEFER error case for "stm32_pwr_wakeup" IRQ. Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Acked-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Eric Dumazet authored
Canonical way to fetch sk_user_data from an encap_rcv() handler called from UDP stack in rcu protected section is to use rcu_dereference_sk_user_data(), otherwise compiler might read it multiple times. Fixes: d00fa9ad ("il2tp: fix races with tunnel socket close") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2019-04-25 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) the bpf verifier fix to properly mark registers in all stack frames, from Paul. 2) preempt_enable_no_resched->preempt_enable fix, from Peter. 3) other misc fixes. ==================== Signed-off-by:
-
