The SEAD-3 board may be configured with or without a MIPS Global
Interrupt Controller (GIC). Because of this we have a device tree with a
default case of a GIC present, and code to fixup the device tree based
upon a configuration register that indicates the presence of the GIC.

In order to keep this DT fixup code simple, the interrupt-parent
property was specified at the root node of the SEAD-3 DT, allowing the
fixup code to simply change this property to the phandle of the CPU
interrupt controller if a GIC is not present & affect all
interrupt-using devices at once. This however causes a problem if we do
have a GIC & the device tree is used as-is, because the interrupt-parent
property of the root node applies to the CPU interrupt controller node.
This causes a cycle when of_irq_init() attempts to probe interrupt
controllers in order and boots fail due to a lack of configured
interrupts, with this message printed on the kernel console:

[    0.000000] OF: of_irq_init: children remain, but no parents

Fix this by removing the interrupt-parent property from the DT root node
& instead setting it for each device which uses interrupts, ensuring
that the CPU interrupt controller node has no interrupt-parent &
allowing of_irq_init() to identify it as the root interrupt controller.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reported-by: Keng Koh <keng.koh@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16187/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add an entry to MAINTAINERS for the generic platform code, such that
relevant people, starting with myself, can be CC'd on patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16186/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Drivers for the mc146818 RTC generally check control registers to
determine whether a value is encoded as binary or as a binary coded
decimal. Setting RTC_ALWAYS_BCD to 1 effectively bypasses these checks
and causes drivers to always expect binary coded decimal values,
regardless of control register values.

This does not seem like a sane default - defaulting to 0 allows the
drivers to check control registers to determine encoding type & allows
the driver to work generically with both binary & BCD encodings. Set
this in mach-generic/mc146818rtc.h such that the generic kernel, or
platforms which don't provide a custom mc146818rtc.h, can have an RTC
driver which works with both encodings.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16185/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Introduce an apply_mips_fdt_fixups() function which can apply fixups to
an FDT based upon an array of fixup descriptions. This abstracts that
functionality such that legacy board code can apply FDT fixups without
requiring lots of duplication.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16184/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Name aliases in the SEAD-3 device tree serial0 & serial1, rather than
uart0 & uart1. This allows the core serial code to make use of the
aliases to ensure that the UARTs are consistently numbered as expected
rather than having the numbering depend upon probe order.

When translating YAMON-provided serial configuration to a device tree
stdout-path property adjust accordingly, such that we continue to
reference a valid alias.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16183/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

YAMON can expose more than 256MB of RAM to Linux on Malta by passing an
ememsize environment variable with the full size, but the kernel then
needs to be careful to choose the corresponding physical memory regions,
avoiding the IO memory window. This is platform dependent, and on Malta
it also depends on the memory layout which varies between system
controllers.

Extend yamon_dt_amend_memory() to generically handle this by taking
[e]memsize bytes of memory from an array of memory regions passed in as
a new parameter. Board code provides this array as appropriate depending
on its own memory map.

[paul.burton@imgtec.com: SEAD-3 supports 384MB DDR from 0]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16182/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

In preparation for supporting other YAMON-using boards (Malta) & sharing
code to translate information from YAMON into device tree properties,
pull the code doing so for the kernel command line, system memory &
serial configuration out of the SEAD-3 board code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16181/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The SEAD-3 board doesn't & never has configured the GIC frequency.
Remove the timer node from the DT in order to avoid attempting to probe
the GIC clocksource/clockevent driver which will produce error messages
such as these during boot:

[    0.000000] GIC frequency not specified.
[    0.000000] Failed to initialize '/interrupt-controller@1b1c0000/timer': -22
[    0.000000] clocksource_probe: no matching clocksources found
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16188/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Adjust the atomic loop in the MIPS_ATOMIC_SET operation of the sysmips
system call to branch straight back to the linked load rather than
jumping via a different subsection (whose purpose remains a mystery to
me).
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16150/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

EVA linked loads (LLE) and conditional stores (SCE) should be used on
EVA kernels for the MIPS_ATOMIC_SET operation of the sysmips system
call, or else the atomic set will apply to the kernel view of the
virtual address space (potentially unmapped on EVA kernels) rather than
the user view (TLB mapped).
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15.x-
Patchwork: https://patchwork.linux-mips.org/patch/16151/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The MIPS sysmips system call handler may return directly from the
MIPS_ATOMIC_SET case (mips_atomic_set()) to syscall_exit. This path
restores the static (callee saved) registers, however they won't have
been saved on entry to the system call.

Use the save_static_function() macro to create a __sys_sysmips wrapper
function which saves the static registers before calling sys_sysmips, so
that the correct static register state is restored by syscall_exit.

Fixes: f1e39a4a ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16149/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The inline asm retry check in the MIPS_ATOMIC_SET operation of the
sysmips system call has been backwards since commit f1e39a4a ("MIPS:
Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
merged in v2.6.32, resulting in the non R10000_LLSC_WAR case retrying
until the operation was inatomic, before returning the new value that
was probably just written multiple times instead of the old value.

Invert the branch condition to fix that particular issue.

Fixes: f1e39a4a ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16148/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add a definition of the perf registers for the new I6500 core.

Since I6500 has the same event definitions as I6400, re-use the existing
i6400 map structures by renaming them to a slightly more generic
'i6x00_***_map'.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16362/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Introduce the I6500 PRID & probe it just the same way as I6400. The MIPS
I6500 is the latest in Imagination Technologies' I-Class range of CPUs,
with a focus on scalability & heterogeneity. It introduces the notion of
multiple clusters to the MIPS Coherent Processing System, allowing for a
far higher total number of cores & threads in a system when compared
with its predecessors. Clusters don't need to be identical, and may
contain differing numbers of cores & IOCUs, or cores with differing
properties.

This patch alone adds the basic support for booting Linux on an I6500
CPU without support for any of its new functionality, for which support
will be introduced in further patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16190/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Recent CPUs from Imagination Technologies such as the I6400 or P6600 are
able to speculatively fetch data from memory into caches. This means
that if used in a system with non-coherent DMA they require that caches
be invalidated after a device performs DMA, and before the CPU reads the
DMA'd data, in order to ensure that stale values weren't speculatively
prefetched.

Such CPUs also introduced Memory Accessibility Attribute Registers
(MAARs) in order to control the regions in which they are allowed to
speculate. Thus we can use the presence of MAARs as a good indication
that the CPU requires the above cache maintenance. Use the presence of
MAARs to determine the result of cpu_needs_post_dma_flush() in the
default case, in order to handle these recent CPUs correctly.

Note that the return type of cpu_needs_post_dma_flush() is changed to
bool, such that it's clearer what's happening when cpu_has_maar is cast
to bool for the return value. If this patch were backported to a
pre-v4.7 kernel then MIPS_CPU_MAAR was 1ull<<34, so when cast to an int
we would incorrectly return 0. It so happens that MIPS_CPU_MAAR is
currently 1ull<<30, so when truncated to an int gives a non-zero value
anyway, but even so the implicit conversion from long long int to bool
makes it clearer to understand what will happen than the implicit
conversion from long long int to int would. The bool return type also
fits this usage better semantically, so seems like an all-round win.

Thanks to Ed for spotting the issue for pre-v4.7 kernels & suggesting
the return type change.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Ed Blake <ed.blake@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16363/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

KProbes of __seccomp_filter() are not very useful without access to
the syscall arguments.

Do what x86 does, and populate a struct seccomp_data to be passed to
__secure_computing().  This allows samples/bpf/tracex5 to extract a
sensible trace.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16368/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Since the eBPF machine has 64-bit registers, we only support this in
64-bit kernels.  As of the writing of this commit log test-bpf is showing:

  test_bpf: Summary: 316 PASSED, 0 FAILED, [308/308 JIT'ed]

All current test cases are successfully compiled.

Many examples in samples/bpf are usable, specifically tracex5 which
uses tail calls works.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16369/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Follow on patches for eBPF JIT require these additional instructions:

   insn_bgtz, insn_blez, insn_break, insn_ddivu, insn_dmultu,
   insn_dsbh, insn_dshd, insn_dsllv, insn_dsra32, insn_dsrav,
   insn_dsrlv, insn_lbu, insn_movn, insn_movz, insn_multu, insn_nor,
   insn_sb, insn_sh, insn_slti, insn_dinsu, insn_lwu

... so, add them.

Sort the insn_* enumeration values alphabetically.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16367/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

DSHD was incorrectly classified as being BSHFL, and DSHD was missing
altogether.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16366/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Instead of doing a linear search through the insn_table for each
instruction, use the opcode as direct index into the table.  This will
give constant time lookup performance as the number of supported
opcodes increases.  Make the tables const as they are only ever read.
For uasm-mips.c sort the table alphabetically, and remove duplicate
entries, uasm-micromips.c was already sorted and duplicate free.
There is a small savings in object size as struct insn loses a field:

$ size arch/mips/mm/uasm-mips.o arch/mips/mm/uasm-mips.o.save
   text	   data	    bss	    dec	    hex	filename
  10040	      0	      0	  10040	   2738	arch/mips/mm/uasm-mips.o
   9240	   1120	      0	  10360	   2878	arch/mips/mm/uasm-mips.o.save
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16365/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The module load code has previously had entirely separate
implementations for rel & rela style relocs, which unnecessarily
duplicates a whole lot of code. Unify the implementations of both types
of reloc, sharing the bulk of the code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15832/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

If we hit an error whilst processing a reloc then we would return early
from apply_relocate & potentially not free entries in r_mips_hi16_list,
thereby leaking memory. Fix this by ensuring that we always run the code
to free r_mipps_hi16_list when errors occur.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 861667dc ("MIPS: Fix race condition in module relocation code.")
Fixes: 04211a57 ("MIPS: Bail on unsupported module relocs")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15831/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Remove old, dead Kconfig options (in order appearing in this commit):
 - EXPERIMENTAL is gone since v3.9;
 - INET_LRO: commit 7bbf3cae ("ipv4: Remove inet_lro library");
 - MTD_CONCAT: commit f53fdebc ("mtd: drop MTD_CONCAT from Kconfig
   entirely");
 - MTD_CHAR: commit 660685d9 ("mtd: merge mtdchar module with
   mtdcore");
 - NETDEV_1000 and NETDEV_10000: commit f860b052 ("drivers/net:
   Kconfig and Makefile cleanup"); NET_ETHERNET should be replaced with
   just ETHERNET but that is separate change;
 - MISC_DEVICES: commit 7c5763b8 ("drivers: misc: Remove
   MISC_DEVICES config option");
 - HID_SUPPORT: commit 1f41a6a9 ("HID: Fix the generic Kconfig
   options");
 - BT_L2CAP and BT_SCO: commit f1e91e16 ("Bluetooth: Always compile
   SCO and L2CAP in Bluetooth Core");
 - DEBUG_ERRORS: commit b025a3f8 ("ARM: 6876/1: Kconfig.debug:
   Remove unused CONFIG_DEBUG_ERRORS");
 - USB_DEVICE_CLASS: commit 007bab91 ("USB: remove
   CONFIG_USB_DEVICE_CLASS");
 - RCU_CPU_STALL_DETECTOR: commit a00e0d71 ("rcu: Remove conditional
   compilation for RCU CPU stall warnings");
 - IP_NF_QUEUE: commit 3dd6664f ("netfilter: remove unused "config
   IP_NF_QUEUE"");
 - IP_NF_TARGET_ULOG: commit d4da843e ("netfilter: kill remnants of
   ulog targets");
 - IP6_NF_QUEUE: commit d16cf20e ("netfilter: remove ip_queue
   support");
 - IP6_NF_TARGET_LOG: commit 6939c33a ("netfilter: merge ipt_LOG and
   ip6_LOG into xt_LOG");
 - USB_LED: commit a335aaf3 ("usb: misc: remove outdated USB LED
   driver");
 - MMC_UNSAFE_RESUME: commit 2501c917 ("mmc: core: Use
   MMC_UNSAFE_RESUME as default behavior");
 - AUTOFS_FS: commit 561c5cf9 ("staging: Remove autofs3");
 - VIDEO_OUTPUT_CONTROL: commit f167a64e ("video / output: Drop
   display output class support");
 - USB_LIBUSUAL: commit f61870ee ("usb: remove libusual");
 - CRYPTO_ZLIB: 11049218 ("crypto: compress - remove unused pcomp
   interface");
 - BLK_DEV_UB: commit 68a5059e ("block: remove the deprecated ub
   driver");
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: linux-arm-kernel@lists.infradead.org
Patchwork: https://patchwork.linux-mips.org/patch/16342/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Sort the entries in config MIPS alphabetically so as to make entries
easier to find.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16068/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull x86 fix from Thomas Gleixner:
 "A single fix to unbreak the vdso32 build for 64bit kernels caused by
  excess #includes in the mshyperv header"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mshyperv: Remove excess #includes from mshyperv.h

Pull timer fixes from Thomas Gleixner:
 "A few fixes for timekeeping and timers:

   - Plug a subtle race due to a missing READ_ONCE() in the timekeeping
     code where reloading of a pointer results in an inconsistent
     callback argument being supplied to the clocksource->read function.

   - Correct the CLOCK_MONOTONIC_RAW sub-nanosecond accounting in the
     time keeping core code, to prevent a possible discontuity.

   - Apply a similar fix to the arm64 vdso clock_gettime()
     implementation

   - Add missing includes to clocksource drivers, which relied on
     indirect includes which fails in certain configs.

   - Use the proper iomem pointer for read/iounmap in a probe function"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW
  time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting
  time: Fix clock->read(clock) race around clocksource changes
  clocksource: Explicitly include linux/clocksource.h when needed
  clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable

Pull perf fixes from Thomas Gleixner:
 "Three fixlets for perf:

   - Return the proper error code if aux buffers for a event are not
     supported.

   - Calculate the probe offset for inlined functions correctly

   - Update the Skylake DTLB load/store miss event so it can count 1G
     TLB entries as well"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf probe: Fix probe definition for inlined functions
  perf/x86/intel: Add 1G DTLB load/store miss support for SKL
  perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev)

Pull irq fix from Thomas Gleixner:
 "A single fix for the MIPS GIC to prevent ftrace recursion"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips-gic: Mark count and compare accessors notrace

Pull input fixes from Dmitry Torokhov:

 - a quirk to i8042 to ignore timeout bit on Lifebook AH544

 - a fixup to Synaptics RMI function 54 that was breaking some Dells

 - a fix for memory leak in soc_button_array driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - only read the F54 query registers which are used
  Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
  Input: soc_button_array - fix leaking the ACPI button descriptor buffer

Pull SCSI target fixes from Nicholas Bellinger:
 "Here are the target-pending fixes for v4.12-rc7 that have been queued
  up for the last 2 weeks. This includes:

   - Fix a TMR related kref underflow detected by the recent refcount_t
     conversion in upstream.

   - Fix a iscsi-target corner case during explicit connection logout
     timeout failure.

   - Address last fallout in iscsi-target immediate data handling from
     v4.4 target-core now allowing control CDB payload underflow"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iscsi-target: Reject immediate data underflow larger than SCSI transfer length
  iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP
  target: Fix kref->refcount underflow in transport_cmd_finish_abort

Merge tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:
 "Nothing scary, just some random fixes:

   - fix warnings of host programs

   - fix "make tags" when COMPILED_SOURCE=1 is specified along with O=

   - clarify help message of C=1 option

   - fix dependency for ncurses compatibility check

   - fix "make headers_install" for fakechroot environment"

* tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix sparse warnings in nconfig
  kbuild: fix header installation under fakechroot environment
  kconfig: Check for libncurses before menuconfig
  Kbuild: tiny correction on `make help`
  tags: honor COMPILED_SOURCE with apart output directory
  genksyms: add printf format attribute to error_with_pos()

Pull timer fix from Eric Biederman:
 "This fixes an issue of confusing injected signals with the signals
  from posix timers that has existed since posix timers have been in the
  kernel.

  This patch is slightly simpler than my earlier version of this patch
  as I discovered in testing that I had misspelled "#ifdef
  CONFIG_POSIX_TIMERS". So I deleted that unnecessary test and made
  setting of resched_timer uncondtional.

  I have tested this and verified that without this patch there is a
  nasty hang that is easy to trigger, and with this patch everything
  works properly"

Thomas Gleixner dixit:
 "It fixes the problem at hand and covers the ptrace case as well, which
  I missed.

  Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de>"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: Only reschedule timers on signals timers have sent

A recent commit included linux/slab.h in linux/irq.h. This breaks the build
of vdso32 on a 64-bit kernel.

The reason is that linux/irq.h gets included into the vdso code via
linux/interrupt.h which is included from asm/mshyperv.h. That makes the
32-bit vdso compile fail, because slab.h includes the pgtable headers for
64-bit on a 64-bit build.

Neither linux/clocksource.h nor linux/interrupt.h are needed in the
mshyperv.h header file itself - it has a dependency on <linux/atomic.h>.

Remove the includes and unbreak the build.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: devel@linuxdriverproject.org
Fixes: dee863b5 ("hv: export current Hyper-V clocksource")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanosSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 4.12. Most of these actually came in last
  week but got held up for some more testing.

   - three fixes for kprobes/ftrace/livepatch interactions.

   - properly handle data breakpoints when using the Radix MMU.

   - fix for perf sampling of registers during call_usermodehelper().

   - properly initialise the thread_info on our emergency stacks

   - add an explicit flush when doing TLB invalidations for a process
     using NPU2.

  Thanks to: Alistair Popple, Naveen N. Rao, Nicholas Piggin, Ravi
  Bangoria, Masami Hiramatsu"

* tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64: Initialise thread_info for emergency stacks
  powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD
  powerpc/perf: Fix oops when kthread execs user process
  powerpc/64s: Handle data breakpoints in Radix mode
  powerpc/kprobes: Skip livepatch_handler() for jprobes
  powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS
  powerpc/kprobes: Pause function_graph tracing during jprobes handling

Pull ACPI fix from Rafael Wysocki:
 "This fixes the ACPI-based enumeration of some I2C and SPI devices
  broken in 4.11.

  Specifics:

   - I2C and SPI devices are expected to be enumerated by the I2C and
     SPI subsystems, respectively, but due to a change made during the
     4.11 cycle, in some cases the ACPI core marks them as already
     enumerated which causes the I2C and SPI subsystems to overlook
     them, so fix that (Jarkko Nikula)"

* tag 'acpi-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / scan: Fix enumeration for special SPI and I2C devices

Pull i2c fix from Wolfram Sang.

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: Use correct function to write to register

Pull GPIO fix from Linus Walleij:
 "A single GPIO patch fixing the compatible string for the MVEBU PWM
  controller embedded in the GPIO controller before we release v4.12.
  Hopefully"

* tag 'gpio-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mvebu: change compatible string for PWM support

Pull sound fixes from Takashi Iwai:
 "Nothing exciting here, just a few stable fixes:

   - suppress spurious kernel WARNING in PCM core

   - fix potential spin deadlock at error handling in firewire

   - HD-audio PCI ID addition / fixup"

* tag 'sound-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Apply quirks to Broxton-T, too
  ALSA: firewire-lib: Fix stall of process context at packet error
  ALSA: pcm: Don't treat NULL chmap as a fatal error
  ALSA: hda - Add Coffelake PCI ID

Pull drm fixes from Dave Airlie:
 "A varied bunch of fixes, one for an API regression with connectors.

  Otherwise amdgpu and i915 have a bunch of varied fixes, the shrinker
  ones being the most important"

* tag 'drm-fixes-for-v4.12-rc7' of git://people.freedesktop.org/~airlied/linux:
  drm: Fix GETCONNECTOR regression
  drm/radeon: add a quirk for Toshiba Satellite L20-183
  drm/radeon: add a PX quirk for another K53TK variant
  drm/amdgpu: adjust default display clock
  drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
  drm/amdgpu: add Polaris12 DID
  drm/i915: Don't enable backlight at setup time.
  drm/i915: Plumb the correct acquire ctx into intel_crtc_disable_noatomic()
  drm/i915: Fix deadlock witha the pipe A quirk during resume
  drm/i915: Remove __GFP_NORETRY from our buffer allocator
  drm/i915: Encourage our shrinker more when our shmemfs allocations fails
  drm/i915: Differentiate between sw write location into ring and last hw read