Christian found v3.9 does not work with E350 with EFI is enabled.

[    1.658832] Trying to unpack rootfs image as initramfs...
[    1.679935] BUG: unable to handle kernel paging request at ffff88006e3fd000
[    1.686940] IP: [<ffffffff813661df>] memset+0x1f/0xb0
[    1.692010] PGD 1f77067 PUD 1f7a067 PMD 61420067 PTE 0

but early memtest report all memory could be accessed without problem.

early page table is set in following sequence:
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000] init_memory_mapping: [mem 0x6e600000-0x6e7fffff]
[    0.000000] init_memory_mapping: [mem 0x6c000000-0x6e5fffff]
[    0.000000] init_memory_mapping: [mem 0x00100000-0x6bffffff]
[    0.000000] init_memory_mapping: [mem 0x6e800000-0x6ea07fff]
but later efi_enter_virtual_mode try set mapping again wrongly.
[    0.010644] pid_max: default: 32768 minimum: 301
[    0.015302] init_memory_mapping: [mem 0x640c5000-0x6e3fcfff]
that means it fails with pfn_range_is_mapped.

It turns out that we have a bug in add_range_with_merge and it does not
merge range properly when new add one fill the hole between two exsiting
ranges. In the case when [mem 0x00100000-0x6bffffff] is the hole between
[mem 0x00000000-0x000fffff] and [mem 0x6c000000-0x6e7fffff].

Fix the add_range_with_merge by calling itself recursively.
Reported-by: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/CAE9FiQVofGoSk7q5-0irjkBxemqK729cND4hov-1QCBJDhxpgQ@mail.gmail.com
Cc: <stable@vger.kernel.org> v3.9
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Pull sound fixes from Takashi Iwai:
 "A fairly calm update at this time, as seen in the short log, only one
  fix per person: including,

   - a few ASoC fixes (da7213 dmic, ux500 AD slot, wm0010 error path)
   - a copule of HD-audio fixes
   - a few other misc fixes (MIPS allmodconfig, proc output in usb, old
     PowerBook support)"

* tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: proc: use found syncmaxsize to determine feedback format
  ALSA: hda - Add headset mic support for another Dell machine
  ALSA: snd-aoa: Add a layout entry for PowerBook6,5
  ALSA: hda - Check the activity of the NID to be powered down
  sound: Fix make allmodconfig on MIPS correctly
  ASoC: da7213: Fix setting dmic_samplephase and dmic_clk_rate
  ASoC: ux500: Swap even/odd AD slot definitions
  ASoC: wm0010: fix error return code in wm0010_boot()

freqshift is only set for the data endpoint and syncmaxsize is only set
for the sync endpoint. This results in a syncmaxsize of zero used in the
proc output feedback format calculation, which gives a feedback format
incorrectly shown as 8.16 for UAC2 devices.

As neither the data nor the sync endpoint gives all the relevant
content, output the two combined.

Also remove the sync_endpoint "packet size" which is always zero
and the sync_endpoint "momentary freq" which is constant.

Tested with UAC2 async and UAC1 adaptive, not tested with UAC1 async.
Reported-by: B. Zhang <bb.zhang@free.fr>
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull drm fixes from Dave Airlie:
 "Fix for radeon nomodeset regression, old radeon interface cliprects
  fix, 2 qxl crasher fixes, and a couple of minor cleanups.

  I may have a new AMD hw support branch next week, its one of those
  doesn't affect anything existing just adds new support, I'll see how
  it shapes up and I might ask you to take it, just thought I'd warn in
  advance."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: restore nomodeset operation (v2)
  qxl: fix bug with object eviction and update area
  drm/qxl: drop active_user_framebuffer as its unneeded
  qxl: drop unused variable.
  drm/qxl: fix ioport interactions for kernel submitted commands.
  drm: remove unused wrapper macros
  drm/radeon: check incoming cliprects pointer

When UMS was deprecated it removed support for nomodeset commandline
we really want this in distro land so we can debug stuff, everyone
should fallback to vesa correctly.

v2: oops -1 isn't used anymore, restore original behaviour
-1 is default, so we can boot with nomodeset on the command line,
then use radeon.modeset=1 to override it for debugging later.

Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

if the surface is evicted, this validation will happen
to the wrong place, I noticed this with other work I was
doing, haven't seen it go wrong in practice.
Signed-off-by: Dave Airlie <airlied@redhat.com>

This was a bogus way to figure out what the active framebuffer was,
just check if the underlying bo is the primary bo.
Signed-off-by: Dave Airlie <airlied@redhat.com>

this boolean isn't used anymore so drop it.
Signed-off-by: Dave Airlie <airlied@redhat.com>

So qxl has ioports, but it really really really doesn't want you
to write to them twice, but if you write and get a signal before
the irq arrives to let you know its completed, you have to think
ahead and avoid writing another time.

However this works fine for update area where really multiple
writes aren't the end of the world, however with create primary
surface, you can't ever do multiple writes. So this stop internal
kernel writes from doing interruptible waits, because otherwise
we have no idea if this write is a new one or a continuation of
a previous one.

virtual hw sucks more than real hw.

This fixes lockups and VM crashes when resizing and starting/stopping
X.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull power management and ACPI fixes from Rafael Wysocki:

 - intel_pstate driver fixes and cleanups from Dirk Brandewie and Wei
   Yongjun.

 - cpufreq fixes related to ARM big.LITTLE support and the cpufreq-cpu0
   driver from Viresh Kumar.

 - Assorted cpufreq fixes from Srivatsa S Bhat, Borislav Petkov, Wolfram
   Sang, Alexander Shiyan, and Nishanth Menon.

 - Assorted ACPI fixes from Catalin Marinas, Lan Tianyu, Alex Hung,
   Jan-Simon Möller, and Rafael J Wysocki.

 - Fix for a kfree() under spinlock in the PM core from Shuah Khan.

 - PM documentation updates from Borislav Petkov and Zhang Rui.

* tag 'pm+acpi-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
  cpufreq: Preserve sysfs files across suspend/resume
  ACPI / scan: Fix memory leak on acpi_scan_init_hotplug() error path
  PM / hibernate: Correct documentation
  PM / Documentation: remove inaccurate suspend/hibernate transition lantency statement
  PM: Documentation update for freeze state
  cpufreq / intel_pstate: use vzalloc() instead of vmalloc()/memset(0)
  cpufreq, ondemand: Remove leftover debug line
  PM: Avoid calling kfree() under spinlock in dev_pm_put_subsys_data()
  cpufreq / kirkwood: don't check resource with devm_ioremap_resource
  cpufreq / intel_pstate: remove #ifdef MODULE compile fence
  cpufreq / intel_pstate: Remove idle mode PID
  cpufreq / intel_pstate: fix ffmpeg regression
  cpufreq / intel_pstate: use lowest requested max performance
  cpufreq / intel_pstate: remove idle time and duration from sample and calculations
  cpufreq: Fix incorrect dependecies for ARM SA11xx drivers
  cpufreq: ARM big LITTLE: Fix Kconfig entries
  cpufreq: cpufreq-cpu0: Free parent node for error cases
  cpufreq: cpufreq-cpu0: defer probe when regulator is not ready
  cpufreq: Issue CPUFREQ_GOV_POLICY_EXIT notifier before dropping policy refcount
  cpufreq: governors: Fix CPUFREQ_GOV_POLICY_{INIT|EXIT} notifiers
  ...

Pull NTB update from Jon Mason:
 "NTB bug fixes to address Smatch/Coverity errors, link toggling bugs,
  and a few corner cases in the driver."

This pull request came in during the merge window, but without any
signage etc.  So I'm taking it late, because it wasn't _originally_
late.

* tag 'ntb-bugfixes-3.10' of git://github.com/jonmason/ntb:
  NTB: Multiple NTB client fix
  ntb_netdev: remove from list on exit
  NTB: memcpy lockup workaround
  NTB: Correctly handle receive buffers of the minimal size
  NTB: reset tx_index on link toggle
  NTB: Link toggle memory leak
  NTB: Handle 64bit BAR sizes
  NTB: fix pointer math issues
  ntb: off by one sanity checks
  NTB: variable dereferenced before check

Merge ipmi fixes from Corey Minyard:
 "Some minor fixes I had queued up.  The last one came in recently
  (patch 4) and it and patch 2 are candidates for stable-kernel."

* emailed patches from Corey Minyard <cminyard@mvista.com>:
  ipmi: ipmi_devintf: compat_ioctl method fails to take ipmi_mutex
  ipmi: Improve error messages on failed irq enable
  drivers/char/ipmi: memcpy, need additional 2 bytes to avoid memory overflow
  drivers: char: ipmi: Replaced kmalloc and strcpy with kstrdup

When a 32 bit version of ipmitool is used on a 64 bit kernel, the
ipmi_devintf code fails to correctly acquire ipmi_mutex.  This results in
incomplete data being retrieved in some cases, or other possible failures.
Add a wrapper around compat_ipmi_ioctl() to take ipmi_mutex to fix this.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the interrupt enable message returns an error, the messages are
not entirely accurate nor helpful.  So improve them.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When calling memcpy, read_data and write_data need additional 2 bytes.

  write_data:
    for checking:  "if (size > IPMI_MAX_MSG_LENGTH)"
    for operating: "memcpy(bt->write_data + 3, data + 1, size - 1)"

  read_data:
    for checking:  "if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH)"
    for operating: "memcpy(data + 2, bt->read_data + 4, msg_len - 2)"
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replaced calls to kmalloc followed by strcpy with a sincle call to
kstrdup.  Patch found using coccinelle.
Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull workqueue fixes from Tejun Heo:
 "Three more workqueue regression fixes.

   - Fix unbalanced unlock in trylock failure path of manage_workers().
     This shouldn't happen often in the wild but is possible.

   - While making schedule_work() and friends inline, they become
     unavailable to !GPL modules.  Allow !GPL modules to access basic
     stuff - system_wq and queue_*work_on() - so that schedule_work()
     and friends can be used.

   - During boot, the unbound NUMA support code allocates a cpumask for
     each possible node using alloc_cpumask_var_node(), which ends up
     trying to allocate node-specific memory even for offline nodes
     triggering BUG in the memory alloc code.  Use NUMA_NO_NODE for
     offline nodes."

* 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: don't perform NUMA-aware allocations on offline nodes in wq_numa_init()
  workqueue: Make schedule_work() available again to non GPL modules
  workqueue: correct handling of the pool spin_lock

Pull RCU fixes from Paul McKenney:
 "A couple of fixes for RCU regressions:

   - A boneheaded boolean-logic bug that resulted in excessive delays on
     boot, hibernation and suspend that was reported by Borislav Petkov,
     Bjørn Mork, and Joerg Roedel.  The fix inserts a single "!".

   - A fix for a boot-time splat due to allocating from bootmem too late
     in boot, fix courtesy of Sasha Levin with additional help from
     Yinghai Lu."

* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu: Don't allocate bootmem from rcu_init()
  rcu: Fix comparison sense in rcu_needs_cpu()

argv_split(empty_or_all_spaces) happily succeeds, it simply returns
argc == 0 and argv[0] == NULL. Change call_usermodehelper_exec() to
check sub_info->path != NULL to avoid the crash.

This is the minimal fix, todo:

 - perhaps we should change argv_split() to return NULL or change the
   callers.

 - kill or justify ->path[0] check

 - narrow the scope of helper_lock()
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-By: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull target fixes from Nicholas Bellinger:
 "A handful of fixes + minor changes this time around, along with one
  important >= v3.9 regression fix for IBLOCK backends.  The highlights
  include:

   - Use FD_MAX_SECTORS in FILEIO for block_device as
     well as files (agrover)

   - Fix processing of out-of-order CmdSNs with
     iSBD driver (shlomo)

   - Close long-standing target_put_sess_cmd() vs.
     core_tmr_abort_task() race with the addition of
     kref_put_spinlock_irqsave() (joern + greg-kh)

   - Fix IBLOCK WCE=1 + DPOFUA=1 backend WRITE
     regression in >= v3.9 (nab + bootc)

  Note these four patches are CC'ed to stable.

  Also, there is still some work left to be done on the active I/O
  shutdown path in target_wait_for_sess_cmds() used by tcm_qla2xxx +
  ib_isert fabrics that is still being discussed on the list, and will
  hopefully be resolved soon."

* 'queue' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: close target_put_sess_cmd() vs. core_tmr_abort_task() race
  target: removed unused transport_state flag
  target/iblock: Fix WCE=1 + DPOFUA=1 backend WRITE regression
  MAINTAINERS: Update target git tree URL
  iscsi-target: Fix typos in RDMAEXTENSIONS macro usage
  target/rd: Add ramdisk bit for NULLIO operation
  iscsi-target: Fix processing of OOO commands
  iscsi-target: Make buf param of iscsit_do_crypto_hash_buf() const void *
  iscsi-target: Fix NULL pointer dereference in iscsit_send_reject
  target: Have dev/enable show if TCM device is configured
  target: Use FD_MAX_SECTORS/FD_BLOCKSIZE for blockdevs using fileio
  target: Remove unused struct members in se_dev_entry

* acpi-fixes:
  ACPI / scan: Fix memory leak on acpi_scan_init_hotplug() error path

* pm-cpufreq:
  cpufreq: Preserve sysfs files across suspend/resume

BugLink: https://bugs.launchpad.net/bugs/1180351Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Either one or a combination of commits 81e5d864
"Register i2c devices from device-tree" and 3a3dd018
"Improve detection of devices from device-tree" broke sound on
PowerBook6,5 machines.

Fix it by adding an entry to the new driver to match PowerBook6,5
machines.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.10

A few small driver-specific fixes, none of them especially crippling.

When an inactive path is powered down with spec->power_down_unused
flag, we should check the activity of each widget in the path whether
it's still referred from any active path.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

wq_numa_init() builds per-node cpumasks which are later used to make
unbound workqueues NUMA-aware.  The cpumasks are allocated using
alloc_cpumask_var_node() for all possible nodes.  Unfortunately, on
machines with off-line nodes, this leads to NUMA-aware allocations on
existing bug offline nodes, which in turn triggers BUG in the memory
allocation code.

Fix it by using NUMA_NO_NODE for cpumask allocations for offline
nodes.

  kernel BUG at include/linux/gfp.h:323!
  invalid opcode: 0000 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0+ #1
  Hardware name: ProLiant BL465c G7, BIOS A19 12/10/2011
  task: ffff880234608000 ti: ffff880234602000 task.ti: ffff880234602000
  RIP: 0010:[<ffffffff8117495d>]  [<ffffffff8117495d>] new_slab+0x2ad/0x340
  RSP: 0000:ffff880234603bf8  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff880237404b40 RCX: 00000000000000d0
  RDX: 0000000000000001 RSI: 0000000000000003 RDI: 00000000002052d0
  RBP: ffff880234603c28 R08: 0000000000000000 R09: 0000000000000001
  R10: 0000000000000001 R11: ffffffff812e3aa8 R12: 0000000000000001
  R13: ffff8802378161c0 R14: 0000000000030027 R15: 00000000000040d0
  FS:  0000000000000000(0000) GS:ffff880237800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: ffff88043fdff000 CR3: 00000000018d5000 CR4: 00000000000007f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Stack:
   ffff880234603c28 0000000000000001 00000000000000d0 ffff8802378161c0
   ffff880237404b40 ffff880237404b40 ffff880234603d28 ffffffff815edba1
   ffff880237816140 0000000000000000 ffff88023740e1c0
  Call Trace:
   [<ffffffff815edba1>] __slab_alloc+0x330/0x4f2
   [<ffffffff81174b25>] kmem_cache_alloc_node_trace+0xa5/0x200
   [<ffffffff812e3aa8>] alloc_cpumask_var_node+0x28/0x90
   [<ffffffff81a0bdb3>] wq_numa_init+0x10d/0x1be
   [<ffffffff81a0bec8>] init_workqueues+0x64/0x341
   [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0
   [<ffffffff819f1f31>] kernel_init_freeable+0xb7/0x1ec
   [<ffffffff815d50de>] kernel_init+0xe/0xf0
   [<ffffffff815ff89c>] ret_from_fork+0x7c/0xb0
  Code: 45  84 ac 00 00 00 f0 41 80 4d 00 40 e9 f6 fe ff ff 66 0f 1f 84 00 00 00 00 00 e8 eb 4b ff ff 49 89 c5 e9 05 fe ff ff <0f> 0b 4c 8b 73 38 44 89 ff 81 cf 00 00 20 00 4c 89 f6 48 c1 ee
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-Tested-by: Lingzhu Xiang <lxiang@redhat.com>

Merge tag 'trace-fixes-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This includes a fix to a memory leak when adding filters to traces.

  Also, Masami Hiramatsu fixed up some minor bugs that were discovered
  by sparse."

* tag 'trace-fixes-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Make print_*probe_event static
  tracing/kprobes: Fix a sparse warning for incorrect type in assignment
  tracing/kprobes: Use rcu_dereference_raw for tp->files
  tracing: Fix leaks of filter preds

Pull x86 fixes from Thomas Gleixner:

 - Fix for a CPU hot-add deadlock in microcode update code

 - Fix for idle consolidation fallout

 - Documentation update for initial kernel direct mapping

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Add missing comments for initial kernel direct mapping
  x86/microcode: Add local mutex to fix physical CPU hot-add deadlock
  x86: Fix idle consolidation fallout

Pull perf fixes from Thomas Gleixner:

 - Fix for a task exit cleanup race caused by a missing a preempt
   disable

 - Cleanup of the event notification functions with a massive reduction
   of duplicated code

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Factor out auxiliary events notification
  perf: Fix EXIT event notification

Pull timer fixes from Thomas Gleixner:

 - Cure for not using zalloc in the first place, which leads to random
   crashes with CPUMASK_OFF_STACK.

 - Revert a user space visible change which broke udev

 - Add a missing cpu_online early return introduced by the new full
   dyntick conversions

 - Plug a long standing race in the timer wheel cpu hotplug code.
   Sigh...

 - Cleanup NOHZ per cpu data on cpu down to prevent stale data on cpu
   up.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons
  timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE
  tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline
  tick: Cleanup NOHZ per cpu data on cpu down
  tick: Use zalloc_cpumask_var for allocating offstack cpumasks

Pull core fixes from Thomas Gleixner:

 - Two fixlets for the fallout of the generic idle task conversion

 - Documentation update

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu/idle: Wrap cpu-idle poll mode within rcu_idle_enter/exit
  idle: Fix hlt/nohlt command-line handling in new generic idle
  kthread: Document ways of reducing OS jitter due to per-CPU kthreads

Pull ARM fixes from Russell King:
 "A small number of fixes for stuff from the last merge window, and in
  one case (IRQ time accounting) the previous merge window."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value
  ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge
  ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked
  ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile
  ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4
  ARM: finally enable IRQ time accounting config

Pull Ceph fixes from Sage Weil:
 "Yes, this is a much larger pull than I would like after -rc1.  There
  are a few things included:

   - a few fixes for leaks and incorrect assertions
   - a few patches fixing behavior when mapped images are resized
   - handling for cloned/layered images that are flattened out from
     underneath the client

  The last bit was non-trivial, and there is some code movement and
  associated cleanup mixed in.  This was ready and was meant to go in
  last week but I missed the boat on Friday.  My only excuse is that I
  was waiting for an all clear from the testing and there were many
  other shiny things to distract me.

  Strictly speaking, handling the flatten case isn't a regression and
  could wait, so if you like we can try to pull the series apart, but
  Alex and I would much prefer to have it all in as it is a case real
  users will hit with 3.10."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (33 commits)
  rbd: re-submit flattened write request (part 2)
  rbd: re-submit write request for flattened clone
  rbd: re-submit read request for flattened clone
  rbd: detect when clone image is flattened
  rbd: reference count parent requests
  rbd: define parent image request routines
  rbd: define rbd_dev_unparent()
  rbd: don't release write request until necessary
  rbd: get parent info on refresh
  rbd: ignore zero-overlap parent
  rbd: support reading parent page data for writes
  rbd: fix parent request size assumption
  libceph: init sent and completed when starting
  rbd: kill rbd_img_request_get()
  rbd: only set up watch for mapped images
  rbd: set mapping read-only flag in rbd_add()
  rbd: support reading parent page data
  rbd: fix an incorrect assertion condition
  rbd: define rbd_dev_v2_header_info()
  rbd: get rid of trivial v1 header wrappers
  ...

The file permissions of cpufreq per-cpu sysfs files are not preserved
across suspend/resume because we internally go through the CPU
Hotplug path which reinitializes the file permissions on CPU online.

But the user is not supposed to know that we are using CPU hotplug
internally within suspend/resume (IOW, the kernel should not silently
wreck the user-set file permissions across a suspend cycle).
Therefore, we need to preserve the file permissions as they are
across suspend/resume.

The simplest way to achieve that is to just not touch the sysfs files
at all - ie., just ignore the CPU hotplug notifications in the
suspend/resume path (_FROZEN) in the cpufreq hotplug callback.
Reported-by: Robert Jarzmik <robert.jarzmik@intel.com>
Reported-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Following commit 6b772e8f (ACPI: Update PNPID match handling for
notify), the acpi_scan_init_hotplug() calls acpi_set_pnp_ids() which
allocates acpi_hardware_id and copies a few strings (kstrdup). If the
devices does not have hardware_id set, the function exits without
freeing the previously allocated ids (and kmemleak complains). This
patch calls simply changes 'return' on error to a 'goto out' which
calls acpi_free_pnp_ids().
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix issue with adding multiple ntb client devices to the ntb virtual
bus.  Previously, multiple devices would be added with the same name,
resulting in crashes.  To get around this issue, add a unique number to
the device when it is added.
Signed-off-by: Jon Mason <jon.mason@intel.com>

The ntb_netdev device is not removed from the global list of devices
upon device removal.  If the device is re-added, the removal code would
find the first instance and try to remove an already removed device.
Signed-off-by: Jon Mason <jon.mason@intel.com>

The system will appear to lockup for long periods of time due to the NTB
driver spending too much time in memcpy.  Avoid this by reducing the
number of packets that can be serviced on a given interrupt.
Signed-off-by: Jon Mason <jon.mason@intel.com>

The ring logic of the NTB receive buffer/transmit memory window requires
there to be at least 2 payload sized allotments.  For the minimal size
case, split the buffer into two and set the transport_mtu to the
appropriate size.
Signed-off-by: Jon Mason <jon.mason@intel.com>