- 17 Mar, 2016 20 commits
-
-
Imre Deak authored
Move the opregion unregistration earlier to match its corresponding registration order. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-14-git-send-email-imre.deak@intel.com
-
Imre Deak authored
Move the GTT,MSI IRQ cleanup later so that it matches their corresponding init order. Also fix the order of these calls wrt. each other to match their corresponding init order. Signed-off-by:
-
Imre Deak authored
Move the power domain uninitialization later so that it matches its corresponding init order. Since we access the HW during the later unitialization steps keep a wake reference until after the last such step. Signed-off-by:
-
Imre Deak authored
We should register all the interfaces before we enable runtime PM. Signed-off-by:
-
Imre Deak authored
According to the new init phases scheme we should register the driver with frameworks/userspace only one the device is setup fully. So move the shrinker registration later accordingly. Also fix the shrinker unregistration order wrt. the acpi unregistration to fix the corresponding init order. Signed-off-by:
-
Imre Deak authored
We require the device to be powered only before accessing it, so we can move this call later. Signed-off-by:
-
Imre Deak authored
The only steps requiring device access is the fence and swizzling initialization, so split these out keeping them in their current place and move the rest of init steps earlier. v2-v3: - unchanged v4: - move call to i915_gem_detect_bit_6_swizzle() to i915_gem_load_init_fences() and preserve the original order of the detection of HW fence capailities wrt. swizzling (Chris) CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Imre Deak authored
This init step accesses the device, but doesn't have any device specific side effect. It also sets up some platform specific attributes that may be required early, so move it earlier. Signed-off-by:
-
Imre Deak authored
Split out the part initing the clock gating hooks and move it earlier. Add a new NOP hook for platforms without the need to apply clockgating or workaround settings, so that the hook can be called unconditionally. Also add a WARN for future platforms that forget to add a hook. The rest of the hooks in intel_init_pm() should be inited in the same way, but atm some of the hooks are set only conditionally, so before doing this we need to make the setup unconditional and use instead some flags. v2: - add a NOP hook and WARN if no hook is set for the platform (Chris) - use the term hook instead of callback for these functions (Jani) v3: - remove the GEN4() check it's already covered by earlier platform checks (Chris) CC: Jani Nikula <jani.nikula@intel.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Imre Deak authored
All of this is SW only initialization so we can move them earlier. Move the mutex init where the rest of the locks are inited. While at it also convert dev to dev_priv. v2: - use the term hook instead of callback for these functions (Jani) CC: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
Most of the IRQ init is setting up hooks so move that part earlier. Leave the pm_qos_add_request() call in place. Signed-off-by:
-
Imre Deak authored
These are all SW only init steps not accessing the device and they only need the platform identification macros to work, which are already available earlier, so move these init steps earlier. Signed-off-by:
-
Imre Deak authored
MCHBAR is cleaned up in i915_mmio_cleanup(), so the separate call in i915_driver_load() is incorrect. CC: David Weinehall <david.weinehall@intel.com> Fixes: ad5c3d3f ("drm/i915: Move MCHBAR setup earlier during init") Signed-off-by:
David Weinehall <david.weinehall@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1458128348-15730-2-git-send-email-imre.deak@intel.com
-
Mika Kuoppala authored
In full gpu reset we prime all engines and reset domains corresponding to each engine. Per engine reset is just a special case of this process wherein only a single engine is reset. This change is aimed to modify relevant functions to achieve this. There are some other steps we carry out in case of engine reset which are addressed in later patches. Reset func now accepts a mask of all engines that need to be reset. Where per engine resets are supported, error handler populates the mask accordingly otherwise all engines are specified. v2: ALL_ENGINES mask fixup, better for_each_ring_masked (Chris) v3: Whitespace fixes (Chris) v4: Rebase due to s/ring/engine Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
We've been accumulating code across the driver that depends on the VBT specific structures and defines. The VBT is an uncontrollable beast. Encourage encapsulation of the VBT data by hiding the structures and defines in a private header only to be included from intel_bios.c. Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-7-git-send-email-jani.nikula@intel.com
-
Jani Nikula authored
drivers/gpu/drm/i915/intel_dpll_mgr.c:1200:32: warning: Using plain integer as NULL pointer Fixes: 304b65cb ("drm/i915: Move SKL/KLB pll selection logic to intel_dpll_mgr.c") Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
-
Maarten Lankhorst authored
Warn for the wrong mask in enable only. Disable will have the wrong mask now because the new state is committed before disabling the old state. Changes since v1: - Use crtc_mask (Durgadoss) - Rebase. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457944075-14123-3-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com>
-
Maarten Lankhorst authored
This makes it easier to verify correct dpll setup with only a single crtc. It is also useful to detect double dpll enable/disable. Changes since v1: - Rebase on top of Ander's dpll rework. - Change debugfs active to a mask. - Change enabled_crtcs and active_crtcs to unsigned. Signed-off-by:
-
Lyude authored
After unplugging a DP MST display from the system, we have to go through and destroy all of the DRM connectors associated with it since none of them are valid anymore. Unfortunately, intel_dp_destroy_mst_connector() doesn't do a good enough job of ensuring that throughout the destruction process that no modesettings can be done with the connectors. As it is right now, intel_dp_destroy_mst_connector() works like this: * Take all modeset locks * Clear the configuration of the crtc on the connector, if there is one * Drop all modeset locks, this is required because of circular dependency issues that arise with trying to remove the connector from sysfs with modeset locks held * Unregister the connector * Take all modeset locks, again * Do the rest of the required cleaning for destroying the connector * Finally drop all modeset locks for good This only works sometimes. During the destruction process, it's very possible that a userspace application will attempt to do a modesetting using the connector. When we drop the modeset locks, an ioctl handler such as drm_mode_setcrtc has the oppurtunity to take all of the modeset locks from us. When this happens, one thing leads to another and eventually we end up committing a mode with the non-existent connector: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* failed to enable link training [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7cf0001f [drm:intel_dp_start_link_train [i915]] *ERROR* failed to start channel equalization [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7cf0001f [drm:intel_mst_pre_enable_dp [i915]] *ERROR* failed to allocate vcpi And in some cases, such as with the T460s using an MST dock, this results in breaking modesetting and/or panicking the system. To work around this, we now unregister the connector at the very beginning of intel_dp_destroy_mst_connector(), grab all the modesetting locks, and then hold them until we finish the rest of the function. CC: stable@vger.kernel.org Signed-off-by:
Lyude <cpaul@redhat.com> Signed-off-by:
Rob Clark <rclark@redhat.com> Reviewed-by:
-
- 16 Mar, 2016 20 commits
-
-
Alex Dai authored
This version of GuC firmware fixes the engine reset issue where golden context LRC address is treated as page index by mistake. It also fixes the problem that scheduler stops submiting to one engine when the other engine work queue is full. Signed-off-by:
Alex Dai <yu.dai@intel.com> Reviewed-by:
Dave Gordon <david.s.gordon@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Jani Nikula authored
Favor a single point of truth instead of duplicating the information. The change also filters out unsupported DSI ports at this stage, accepting only ports A and C, instead of waiting until the port checks. Reviewed-by:
-
Jani Nikula authored
Use the connector type instead of VBT directly to decide which backlight mechanism to use on VLV/CHV. (Indirectly, this is the same thing, but hides the VBT use.) Reviewed-by:
-
Jani Nikula authored
Hide knowledge about VBT child devices in intel_bios.c. v2: Move port check to intel_bios.c (Sivakumar) Reviewed-by:
-
Jani Nikula authored
Hide knowledge about VBT child devices in intel_bios.c. Reviewed-by:
-
Jani Nikula authored
Hide knowledge about VBT child devices in intel_bios.c. Reviewed-by:
-
Jani Nikula authored
Hide knowledge about VBT child devices in intel_bios.c. v2: also move int_tv_support check to intel_bios.c (Sivakumar) Reviewed-by:
-
Jani Nikula authored
BXT isn't as limited as BYT and CHT regarding DSI pipes and ports. Reviewed-by:
-
Jani Nikula authored
Make the code easier to read and update. No functional changes. Reviewed-by:
-
Jani Nikula authored
Nicer for eDP (actually "EDP" instead of "D"), and makes future expansion for DSI transcoders easier. Reviewed-by:
-
Jani Nikula authored
Same as for_each_dsi_port, but for general use. Leave the for_each_dsi_port version around as an "alias" for now to not cause too much churn. No functional changes. Reviewed-by:
-
Jani Nikula authored
A small step moving us closer to DRM MIPI DSI code. Use enum mipi_dsi_pixel_format instead of our own. The first benefit is being able to use common mipi_dsi_pixel_format_to_bpp(). There's a little back and forth conversion with the VBT -> enum -> register, since we have just shoved the VBT value into the register directly. Longer term, all the VBT parsing and deciphering should be done in intel_bios.c, and abstracted there. Reviewed-by:
-
Jani Nikula authored
The enum mipi_dsi_pixel_format defines MIPI_DSI_FMT_RGB666 for the "loose" 24 bpp format and MIPI_DSI_FMT_RGB666_PACKED for the 18 bpp format. We have this the other way round, defining a loose version for 24 bpp. Follow suit with what's in enum mipi_dsi_pixel_format to avoid future confusion. Rename VID_MODE_FORMAT_RGB666 -> VID_MODE_FORMAT_RGB666_PACKED VID_MODE_FORMAT_RGB666_LOOSE -> VID_MODE_FORMAT_RGB666 Reviewed-by:
-
Chris Wilson authored
If the firmware is generic and has a run-anywhere mode, enable it rather than completely failing on unknown HW revisions. Signed-off-by:
-
Nathan Schulte authored
Adds an (unsafe; auto-kernel-tainting) boolean module parameter to the i915 drm driver: "enable_dp_mst", which is enabled by default. Disabling the parameter forces newly connected DisplayPort sinks to report as not supporting multi-stream transport (MST), thus "forcing" the use of single-stream transport (SST). v2: rename parameter to conform to style v3: add signoff Signed-off-by:
Nathan Schulte <nmschulte@gmail.com> Signed-off-by:
-
Tvrtko Ursulin authored
This time using only sed and a few by hand. v2: Rename also intel_ring_id and intel_ring_initialized. v3: Fixed typo in intel_ring_initialized. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
Some trivial ones, first pass done with Coccinelle: @@ @@ ( - I915_NUM_RINGS + I915_NUM_ENGINES | - intel_ring_flag + intel_engine_flag | - for_each_ring + for_each_engine | - i915_gem_request_get_ring + i915_gem_request_get_engine | - intel_ring_idle + intel_engine_idle | - i915_gem_reset_ring_status + i915_gem_reset_engine_status | - i915_gem_reset_ring_cleanup + i915_gem_reset_engine_cleanup | - init_ring_lists + init_engine_lists ) But that didn't fully work so I cleaned it up with: for f in *.[hc]; do sed -i -e s/I915_NUM_RINGS/I915_NUM_ENGINES/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_request_get_ring/i915_gem_request_get_engine/ $f; done for f in *.[hc]; do sed -i -e s/intel_ring_flag/intel_engine_flag/ $f; done for f in *.[hc]; do sed -i -e s/intel_ring_idle/intel_engine_idle/ $f; done for f in *.[hc]; do sed -i -e s/init_ring_lists/init_engine_lists/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_cleanup/i915_gem_reset_engine_cleanup/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_status/i915_gem_reset_engine_status/ $f; done v2: Rebase. Signed-off-by:
-
Tvrtko Ursulin authored
below and a couple manual fixups. @@ identifier I, J; @@ struct I { ... - struct intel_engine_cs *J; + struct intel_engine_cs *engine; ... } @@ identifier I, J; @@ struct I { ... - struct intel_engine_cs J; + struct intel_engine_cs engine; ... } @@ struct drm_i915_private *d; @@ ( - d->ring + d->engine ) @@ struct i915_execbuffer_params *p; @@ ( - p->ring + p->engine ) @@ struct intel_ringbuffer *r; @@ ( - r->ring + r->engine ) @@ struct drm_i915_gem_request *req; @@ ( - req->ring + req->engine ) v2: Script missed the tracepoint code - fixed up by hand. Signed-off-by: -
Tvrtko Ursulin authored
@@ identifier func; @@ func(..., struct intel_engine_cs * - ring + engine , ...) { <... - ring + engine ...> } @@ identifier func; type T; @@ T func(..., struct intel_engine_cs * - ring + engine , ...); Signed-off-by: -
Tvrtko Ursulin authored
Done by the Coccinelle script below plus a manual intervention to GEN8_RING_SEMAPHORE_INIT. @@ expression E; @@ - struct intel_engine_cs *ring = E; + struct intel_engine_cs *engine = E; <+... - ring + engine ...+> @@ @@ - struct intel_engine_cs *ring; + struct intel_engine_cs *engine; <+... - ring + engine ...+> Signed-off-by:
-
