For the "starry, 2081101qfh032011-53g" panel, it is stipulated in the
panel spec that MIPI needs to keep the LP11 state before the
lcm_reset pin is pulled high.

Fixes: 6069b66c ("drm/panel: support for STARRY 2081101QFH032011-53G MIPI-DSI panel")
Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.comSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.com

Fake flexible arrays (zero-length and one-element arrays) are deprecated,
and should be replaced by flexible-array members. So, replace
zero-length array with a flexible-array member in `struct
PACKED_REGISTRY_TABLE`.

Also annotate array `entries` with `__counted_by()` to prepare for the
coming implementation by GCC and Clang of the `__counted_by` attribute.
Flexible array members annotated with `__counted_by` can have their
accesses bounds-checked at run-time via `CONFIG_UBSAN_BOUNDS` (for array
indexing) and `CONFIG_FORTIFY_SOURCE` (for strcpy/memcpy-family functions).

This fixes multiple -Warray-bounds warnings:
drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1069:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=]
drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1070:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=]
drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1071:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=]
drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1072:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=]

While there, also make use of the struct_size() helper, and address
checkpatch.pl warning:
WARNING: please, no spaces at the start of a line

This results in no differences in binary output.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZVZbX7C5suLMiBf+@work

This unlock doesn't belong here and it leads to a double unlock in
the caller, r535_gsp_rpc_push().

Fixes: 176fdcbd ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a0293812-c05d-45f0-a535-3f24fe582c02@moroto.mountain

With the new uapi we don't have the comp flags on the allocation,
so we shouldn't be using the first size that works, we should be
iterating until we get the correct one.

This reduces allocations from 2MB to 64k in lots of places.

Fixes dEQP-VK.memory.allocation.basic.size_8KiB.forward.count_4000
on my ampere/gsp system.

Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811031520.248341-1-airlied@gmail.com

"GPL-2.0-only" in the license header was incorrectly changed to the
now deprecated "GPL-2.0". Fix.

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Reported-by: David Edelsohn <dje.gcc@gmail.com>
Closes: https://lore.kernel.org/dri-devel/5lfrhdpkwhpgzipgngojs3tyqfqbesifzu5nf4l5q3nhfdhcf2@25nmiq7tfrew/T/#m5c356d68815711eea30dd94cc6f7ea8cd4344fe3
Fixes: f7749a54 ("drm/gpuvm: Dual-licence the drm_gpuvm code GPL-2.0 OR MIT")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231106114827.62492-1-thomas.hellstrom@linux.intel.com

This reverts commit 199cf07e.

This patch creates bugs on devices where the DRM device is
the ancestor of the panel devices.

Attempts to fix this have failed because it leads to using
device core functionality which is questionable.
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-3-69bb05048dae@linaro.orgSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-3-69bb05048dae@linaro.org

This reverts commit 1d5e8f4b.

Greg says: "why exactly is this needed?  Nothing outside of
the driver core should be needing this function, it shouldn't
be public at all (I missed that before.)

So please, revert it for now, let's figure out why DRM thinks
this is needed for it's devices, and yet no other bus/subsystem
does."

Link: https://lore.kernel.org/dri-devel/2023112739-willing-sighing-6bdd@gregkh/Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-1-69bb05048dae@linaro.orgSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-1-69bb05048dae@linaro.org

This reverts commit 39d5b6a6.

This patch was causing build errors by using an unexported
function from the device core, which Greg questions the
saneness in exporting.

Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-2-69bb05048dae@linaro.orgSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-2-69bb05048dae@linaro.org

It's valid to add the same fence multiple times to a dma-resv object and
we shouldn't need one extra slot for each.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: a3f7c10a ("dma-buf/dma-resv: check if the new fence is really later")
Cc: stable@vger.kernel.org # v5.19+
Link: https://patchwork.freedesktop.org/patch/msgid/20231115093035.1889-1-christian.koenig@amd.com

Export device_is_dependent() since the drm_kms_helper module is starting
to use it.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127051414.3783108-2-victor.liu@nxp.com

Some panel devices already depend on DRM device, like the panel in
arch/arm/boot/dts/st/ste-ux500-samsung-skomer.dts, because DRM device is
the ancestor of those panel devices.  device_link_add() would fail by
returning a NULL pointer for those panel devices because of the existing
dependency.  So, check the dependency by calling device_is_dependent()
before adding or deleting device link between panel device and DRM device
so that the link is managed only for independent panel devices.

Fixes: 88787801 ("drm/bridge: panel: Fix device link for DRM_BRIDGE_ATTACH_NO_CONNECTOR")
Fixes: 199cf07e ("drm/bridge: panel: Add a device link between drm device and panel device")
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Closes: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231123032615.3760488-1-victor.liu@nxp.com

This probably isn't the ideal fix, but we ended up using chids
sparsely, and lots of things rely on indexing into the full range,
so just allocate the full range up front.

The GSP code fixes 8 channels into a userd page, but we end up using
a single userd page per channel so end up sparsely using the range.

Fixes a few crashes seen with multiple channels.

Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/277Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121201109.2988516-1-airlied@gmail.com

The refresh reported by modetest is 60.46Hz, and the actual measurement
is 60.01Hz, which is outside the expected tolerance. Adjust hporch and
pixel clock to fix it. After repair, modetest and actual measurement were
all 60.01Hz.

Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate
is HS->LP cycle time(Vblanking). Measured frame rate is not only affecte
by Htotal/Vtotal/pixel clock, also affected by Lane-num/PixelBit/LineTime
/DSI CLK. Assume that the DSI controller could not make the mode that we
requested(presumably it's PLL couldn't generate the exact pixel clock?).
If you use a different DSI controller, you may need to readjust these
parameters. Now this panel looks like it's only used by me on the MTK
platform, so let's change this set of parameters.

Fixes: 1bc2ef06 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel")
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120020109.3216343-1-yangcong5@huaqin.corp-partner.google.com

Many user-space compositors fail with mode setting if a CRTC has
more than one connected connector. This is the case with the BMC
on Aspeed systems. Work around this problem by setting the BMC's
connector status to disconnected when the physical connector has
a display attached. This way compositors will only see one connected
connector at a time; either the physical one or the BMC.
Suggested-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: e329cb53 ("drm/ast: Add BMC virtual connector")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116130217.22931-1-tzimmermann@suse.de

There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET
register. IP will be reset by FLR or by entering d0i3. Also IP reset
during power_up is not needed as the VPU is already in reset.

Removing MMIO reset improves stability as it a partial device reset
that is not safe in some corner cases.

This change also brings back ivpu_boot_pwr_domain_disable() that
helps to properly power down VPU when it is hung by a buggy workload.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Fixes: 828d6304 ("accel/ivpu: Don't enter d0i3 during FLR")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com

Use of DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 on e.g. RK3288, RK3328
and RK3399 result in wrong colors being displayed.

The issue can be observed using modetest:

  modetest -s <connector_id>@<crtc_id>:1920x1080-60@RG24
  modetest -s <connector_id>@<crtc_id>:1920x1080-60@BG24

Vendor 4.4 kernel apply an inverted rb swap for these formats on VOP
full framework (IP version 3.x) compared to VOP little framework (2.x).

Fix colors by applying different rb swap for VOP full framework (3.x)
and VOP little framework (2.x) similar to vendor 4.4 kernel.

Fixes: 85a359f2 ("drm/rockchip: Add BGR formats to VOP")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026191500.2994225-1-jonas@kwiboo.se

The Innolux G101ICE-L01 datasheet [1] page 17 table
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
indicates that maximum vertical blanking time is 40 lines.
Currently the driver uses 29 lines.

Fix it, and since this panel is a DE panel, adjust the timings
to make them less hostile to controllers which cannot do 1 px
HSA/VSA, distribute the delays evenly between all three parts.

[1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf

Fixes: 1e29b840 ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de

Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description,
ones which match both the datasheet and the panel display_timing flags .

Fixes: 1e29b840 ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de

For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that
MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high.

Fixes: 56ad624b ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel")
Signed-off-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114044205.613421-1-xuxinxiong@huaqin.corp-partner.google.com

If we get back ENODEV don't fail load. There are nvidia devices
that don't have display blocks and the driver should work on those.

Fixes: 15740541 ("drm/nouveau/devinit/tu102-: prepare for GSP-RM")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/270Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115143933.261287-1-airlied@gmail.com

The Legion Go has a 2560x1600 portrait screen, with the native "up" facing
the right controller (90° CW from the rest of the device).
Signed-off-by: Brenton Simpson <appsforartists@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231114233859.274189-1-appsforartists@google.com

The usage count of struct dev_pm_info is an implementation detail that
is only available if CONFIG_PM is enabled, so printing it in a debug message
causes a build failure in configurations without PM:

In file included from include/linux/device.h:15,
                 from include/linux/pci.h:37,
                 from drivers/accel/ivpu/ivpu_pm.c:8:
drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active':
drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count'
  254 |                  atomic_read(&vdev->drm.dev->power.usage_count));
      |                                                   ^
include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk'
  129 |                 _dev_printk(level, dev, fmt, ##__VA_ARGS__);            \
      |                                                ^~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg'
   75 |                 dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args);          \
      |                 ^~~~~~~
drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg'
  253 |         ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n",
      |         ^~~~~~~~

The print message does not seem essential, so the easiest workaround is
to just remove it.

Fixes: c39dc151 ("accel/ivpu: Read clock rate only if device is up")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org
(cherry picked from commit 1470acbe)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>

This allows it to break the following circular locking dependency.

Aug 10 07:01:29 dg1test kernel: ======================================================
Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected
Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ #10 Not tainted
Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------
Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock:
Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel:
                                but task is already holding lock:
Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:
                                which lock already depends on the new lock.
Aug 10 07:01:29 dg1test kernel:
                                the existing dependency chain (in reverse order) is:
Aug 10 07:01:29 dg1test kernel:
                                -> #3 (&event->list_lock#2){-...}-{2:2}:
Aug 10 07:01:29 dg1test kernel:        _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel:        nvkm_event_ntfy+0x50/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        ga100_fifo_nonstall_intr+0x24/0x30 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_intr+0x12c/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel:        __handle_irq_event_percpu+0x88/0x240
Aug 10 07:01:29 dg1test kernel:        handle_irq_event+0x38/0x80
Aug 10 07:01:29 dg1test kernel:        handle_edge_irq+0xa3/0x240
Aug 10 07:01:29 dg1test kernel:        __common_interrupt+0x72/0x160
Aug 10 07:01:29 dg1test kernel:        common_interrupt+0x60/0xe0
Aug 10 07:01:29 dg1test kernel:        asm_common_interrupt+0x26/0x40
Aug 10 07:01:29 dg1test kernel:
                                -> #2 (&device->intr.lock){-...}-{2:2}:
Aug 10 07:01:29 dg1test kernel:        _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel:        nvkm_inth_allow+0x2c/0x80 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_event_ntfy_state+0x181/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_event_ntfy_allow+0x63/0xd0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_uevent_mthd+0x4d/0x70 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_ioctl+0x10b/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvif_object_mthd+0xa8/0x1f0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvif_event_allow+0x2a/0xa0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nouveau_fence_enable_signaling+0x78/0x80 [nouveau]
Aug 10 07:01:29 dg1test kernel:        __dma_fence_enable_signaling+0x5e/0x100
Aug 10 07:01:29 dg1test kernel:        dma_fence_add_callback+0x4b/0xd0
Aug 10 07:01:29 dg1test kernel:        nouveau_cli_work_queue+0xae/0x110 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nouveau_gem_object_close+0x1d1/0x2a0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        drm_gem_handle_delete+0x70/0xe0 [drm]
Aug 10 07:01:29 dg1test kernel:        drm_ioctl_kernel+0xa5/0x150 [drm]
Aug 10 07:01:29 dg1test kernel:        drm_ioctl+0x256/0x490 [drm]
Aug 10 07:01:29 dg1test kernel:        nouveau_drm_ioctl+0x5a/0xb0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        __x64_sys_ioctl+0x91/0xd0
Aug 10 07:01:29 dg1test kernel:        do_syscall_64+0x3c/0x90
Aug 10 07:01:29 dg1test kernel:        entry_SYSCALL_64_after_hwframe+0x72/0xdc
Aug 10 07:01:29 dg1test kernel:
                                -> #1 (&event->refs_lock#4){....}-{2:2}:
Aug 10 07:01:29 dg1test kernel:        _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel:        nvkm_event_ntfy_state+0x37/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_event_ntfy_allow+0x63/0xd0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_uevent_mthd+0x4d/0x70 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_ioctl+0x10b/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvif_object_mthd+0xa8/0x1f0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvif_event_allow+0x2a/0xa0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nouveau_fence_enable_signaling+0x78/0x80 [nouveau]
Aug 10 07:01:29 dg1test kernel:        __dma_fence_enable_signaling+0x5e/0x100
Aug 10 07:01:29 dg1test kernel:        dma_fence_add_callback+0x4b/0xd0
Aug 10 07:01:29 dg1test kernel:        nouveau_cli_work_queue+0xae/0x110 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nouveau_gem_object_close+0x1d1/0x2a0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        drm_gem_handle_delete+0x70/0xe0 [drm]
Aug 10 07:01:29 dg1test kernel:        drm_ioctl_kernel+0xa5/0x150 [drm]
Aug 10 07:01:29 dg1test kernel:        drm_ioctl+0x256/0x490 [drm]
Aug 10 07:01:29 dg1test kernel:        nouveau_drm_ioctl+0x5a/0xb0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        __x64_sys_ioctl+0x91/0xd0
Aug 10 07:01:29 dg1test kernel:        do_syscall_64+0x3c/0x90
Aug 10 07:01:29 dg1test kernel:        entry_SYSCALL_64_after_hwframe+0x72/0xdc
Aug 10 07:01:29 dg1test kernel:
                                -> #0 (&fctx->lock){-...}-{2:2}:
Aug 10 07:01:29 dg1test kernel:        __lock_acquire+0x14e3/0x2240
Aug 10 07:01:29 dg1test kernel:        lock_acquire+0xc8/0x2a0
Aug 10 07:01:29 dg1test kernel:        _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel:        nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_client_event+0xf/0x20 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_event_ntfy+0x9b/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:        ga100_fifo_nonstall_intr+0x24/0x30 [nouveau]
Aug 10 07:01:29 dg1test kernel:        nvkm_intr+0x12c/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel:        __handle_irq_event_percpu+0x88/0x240
Aug 10 07:01:29 dg1test kernel:        handle_irq_event+0x38/0x80
Aug 10 07:01:29 dg1test kernel:        handle_edge_irq+0xa3/0x240
Aug 10 07:01:29 dg1test kernel:        __common_interrupt+0x72/0x160
Aug 10 07:01:29 dg1test kernel:        common_interrupt+0x60/0xe0
Aug 10 07:01:29 dg1test kernel:        asm_common_interrupt+0x26/0x40
Aug 10 07:01:29 dg1test kernel:
                                other info that might help us debug this:
Aug 10 07:01:29 dg1test kernel: Chain exists of:
                                  &fctx->lock --> &device->intr.lock --> &event->list_lock#2
Aug 10 07:01:29 dg1test kernel:  Possible unsafe locking scenario:
Aug 10 07:01:29 dg1test kernel:        CPU0                    CPU1
Aug 10 07:01:29 dg1test kernel:        ----                    ----
Aug 10 07:01:29 dg1test kernel:   lock(&event->list_lock#2);
Aug 10 07:01:29 dg1test kernel:                                lock(&device->intr.lock);
Aug 10 07:01:29 dg1test kernel:                                lock(&event->list_lock#2);
Aug 10 07:01:29 dg1test kernel:   lock(&fctx->lock);
Aug 10 07:01:29 dg1test kernel:
                                 *** DEADLOCK ***
Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236:
Aug 10 07:01:29 dg1test kernel:  #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel:  #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:
                                stack backtrace:
Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ #10
Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
Aug 10 07:01:29 dg1test kernel: Call Trace:
Aug 10 07:01:29 dg1test kernel:  <TASK>
Aug 10 07:01:29 dg1test kernel:  dump_stack_lvl+0x5b/0x90
Aug 10 07:01:29 dg1test kernel:  check_noncircular+0xe2/0x110
Aug 10 07:01:29 dg1test kernel:  __lock_acquire+0x14e3/0x2240
Aug 10 07:01:29 dg1test kernel:  lock_acquire+0xc8/0x2a0
Aug 10 07:01:29 dg1test kernel:  ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel:  ? lock_acquire+0xc8/0x2a0
Aug 10 07:01:29 dg1test kernel:  _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel:  ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel:  nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel:  nvkm_client_event+0xf/0x20 [nouveau]
Aug 10 07:01:29 dg1test kernel:  nvkm_event_ntfy+0x9b/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:  ga100_fifo_nonstall_intr+0x24/0x30 [nouveau]
Aug 10 07:01:29 dg1test kernel:  nvkm_intr+0x12c/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel:  __handle_irq_event_percpu+0x88/0x240
Aug 10 07:01:29 dg1test kernel:  handle_irq_event+0x38/0x80
Aug 10 07:01:29 dg1test kernel:  handle_edge_irq+0xa3/0x240
Aug 10 07:01:29 dg1test kernel:  __common_interrupt+0x72/0x160
Aug 10 07:01:29 dg1test kernel:  common_interrupt+0x60/0xe0
Aug 10 07:01:29 dg1test kernel:  asm_common_interrupt+0x26/0x40
Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700
Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 <f3> 0f 1e fa e9 c7 0f fc>
Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206
Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0
Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950
Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001
Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490
Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280
Aug 10 07:01:29 dg1test kernel:  </TASK>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107053255.2257079-1-airlied@gmail.com

The r535_gsp_cmdq_get() function returns error pointers but this code
checks for NULL.  Also we need to propagate the error pointer back to
the callers in r535_gsp_rpc_get().  Returning NULL will lead to a NULL
pointer dereference.

Fixes: 176fdcbd ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f71996d9-d1cb-45ea-a4b2-2dfc21312d8c@kili.mountain

The if we hit the "continue" statement on the first iteration through
the loop then "handle_mux" needs to be set to NULL so we continue
looping.

Fixes: 176fdcbd ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1d864f6e-43e9-43d8-9d90-30e76c9c843b@moroto.mountain

The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))

Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:

 - Include the upper 5 address bits when inserting TLB entries on a
   64-bit kernel.

   On physical machines those are ignored, but in qemu it's nice to have
   them included and to be correct.

 - Stop the 64-bit kernel and show a warning if someone tries to boot on
   a machine with a 32-bit CPU

 - Fix a "no previous prototype" warning in parport-gsc

* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Prevent booting 64-bit kernels on PA1.x machines
  parport: gsc: mark init function static
  parisc/pgtable: Do not drop upper 5 address bits of physical address

Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - support PREEMPT_DYNAMIC with static keys

 - relax memory ordering for atomic operations

 - support BPF CPU v4 instructions for LoongArch

 - some build and runtime warning fixes

* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  selftests/bpf: Enable cpu v4 tests for LoongArch
  LoongArch: BPF: Support signed mod instructions
  LoongArch: BPF: Support signed div instructions
  LoongArch: BPF: Support 32-bit offset jmp instructions
  LoongArch: BPF: Support unconditional bswap instructions
  LoongArch: BPF: Support sign-extension mov instructions
  LoongArch: BPF: Support sign-extension load instructions
  LoongArch: Add more instruction opcodes and emit_* helpers
  LoongArch/smp: Call rcutree_report_cpu_starting() earlier
  LoongArch: Relax memory ordering for atomic operations
  LoongArch: Mark __percpu functions as always inline
  LoongArch: Disable module from accessing external data directly
  LoongArch: Support PREEMPT_DYNAMIC with static keys

Pull powerpc fixes from Michael Ellerman:

 - Finish a refactor of pgprot_framebuffer() which dependend
   on some changes that were merged via the drm tree

 - Fix some kernel-doc warnings to quieten the bots

Thanks to Nathan Lynch and Thomas Zimmermann.

* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
  powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
  powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
  powerpc: Remove file parameter from phys_mem_access_prot()
  powerpc/machdep: Remove trailing whitespaces

Pull smb client fixes from Steve French:

 - ctime caching fix (for setxattr)

 - encryption fix

 - DNS resolver mount fix

 - debugging improvements

 - multichannel fixes including cases where server stops or starts
   supporting multichannel after mount

 - reconnect fix

 - minor cleanups

* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: handle when server stops supporting multichannel
  cifs: handle when server starts supporting multichannel
  Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
  smb3: allow dumping session and tcon id to improve stats analysis and debugging
  smb: client: fix mount when dns_resolver key is not available
  smb3: fix caching of ctime on setxattr
  smb3: minor cleanup of session handling code
  cifs: reconnect work should have reference on server struct
  cifs: do not pass cifs_sb when trying to add channels
  cifs: account for primary channel in the interface list
  cifs: distribute channels across interfaces based on speed
  cifs: handle cases where a channel is closed
  smb3: more minor cleanups for session handling routines
  smb3: minor RDMA cleanup
  cifs: Fix encryption of cleared, but unset rq_iter data buffers

Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - Documentation update: Add a note about argument and return value
   fetching is the best effort because it depends on the type.

 - objpool: Fix to make internal global variables static in
   test_objpool.c.

 - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
   same prototypes in asm/kprobes.h for some architectures, but some of
   them are missing the prototype and it causes a warning. So move the
   prototype into linux/kprobes.h.

 - tracing: Fix to check the tracepoint event and return event at
   parsing stage. The tracepoint event doesn't support %return but if
   $retval exists, it will be converted to %return silently. This finds
   that case and rejects it.

 - tracing: Fix the order of the descriptions about the parameters of
   __kprobe_event_gen_cmd_start() to be consistent with the argument
   list of the function.

* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/kprobes: Fix the order of argument descriptions
  tracing: fprobe-event: Fix to check tracepoint event and return
  kprobes: unify kprobes_exceptions_nofify() prototypes
  lib: test_objpool: make global variables static
  Documentation: tracing: Add a note about argument and retval access

Pull fbdev fixes and cleanups from Helge Deller:

 - fix double free and resource leaks in imsttfb

 - lots of remove callback cleanups and section mismatch fixes in
   omapfb, amifb and atmel_lcdfb

 - error code fix and memparse simplification in omapfb

* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
  fbdev: fsl-diu-fb: mark wr_reg_wa() static
  fbdev: amifb: Convert to platform remove callback returning void
  fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
  fbdev: hyperv_fb: fix uninitialized local variable use
  fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
  fbdev: omapfb/tfp410: Convert to platform remove callback returning void
  fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
  fbdev: omapfb/opa362: Convert to platform remove callback returning void
  fbdev: omapfb/hdmi: Convert to platform remove callback returning void
  fbdev: omapfb/dvi: Convert to platform remove callback returning void
  fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
  fbdev: omapfb/dpi: Convert to platform remove callback returning void
  fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
  fbdev: atmel_lcdfb: Convert to platform remove callback returning void
  fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  ...

The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.

int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
                                 const char *name, const char *loc, ...)

Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/

Fixes: 2a588dd1 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Pull drm fixes from Daniel Vetter:
 "Dave's VPN to the big machine died, so it's on me to do fixes pr this
  and next week while everyone else is at plumbers.

   - big pile of amd fixes, but mostly for hw support newly added in 6.7

   - i915 fixes, mostly minor things

   - qxl memory leak fix

   - vc4 uaf fix in mock helpers

   - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"

* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
  drm/amdgpu: fix error handling in amdgpu_vm_init
  drm/amdgpu: Fix possible null pointer dereference
  drm/amdgpu: move UVD and VCE sched entity init after sched init
  drm/amdgpu: move kfd_resume before the ip late init
  drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
  drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
  drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
  drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
  drm/amdgpu: fix software pci_unplug on some chips
  drm/amd/display: remove duplicated argument
  drm/amdgpu: correct mca debugfs dump reg list
  drm/amdgpu: correct acclerator check architecutre dump
  drm/amdgpu: add pcs xgmi v6.4.0 ras support
  drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
  drm/amdgpu: disable smu v13.0.6 mca debug mode by default
  drm/amdgpu: Support multiple error query modes
  drm/amdgpu: refine smu v13.0.6 mca dump driver
  drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
  drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
  drm: amd: Resolve Sphinx unexpected indentation warning
  ...

Pull arm64 fixes from Catalin Marinas:
 "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
  MediaTek firmware:

   - Move the MediaTek GIC quirk handling from irqchip to core. Before
     the merging window commit 44bd78dd ("irqchip/gic-v3: Disable
     pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
     addressed this issue. Fixed now at a deeper level in the arch code

   - Reject events meant for other PMUs in the CoreSight PMU driver,
     otherwise some of the core PMU events would disappear

   - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
     causing some events to be invisible

   - Remove duplicate declaration of __arm64_sys##name following the
     patch to avoid prototype warning for syscalls

   - Typos in the elf_hwcap documentation"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/syscall: Remove duplicate declaration
  Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
  arm64: Move MediaTek GIC quirk handling from irqchip to core
  arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
  perf: arm_cspmu: Reject events meant for other PMUs
  Documentation/arm64: Fix typos in elf_hwcaps

Pull sound fixes from Takashi Iwai:
 "A collection of fixes for rc1.

  The majority of changes are various ASoC driver-specific small fixes
  and usual HD-audio quirks, while there are a couple of core changes: a
  fix in ALSA core procfs code to avoid deadlocks at disconnection and
  an ASoC core fix for DAPM clock widgets"

* tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  OSS: dmasound/paula: Convert to platform remove callback returning void
  ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus
  ALSA: info: Fix potential deadlock at disconnection
  ASoC: nau8540: Add self recovery to improve capture quility
  ALSA: hda/realtek: Add support dual speaker for Dell
  ALSA: hda: Add ASRock X670E Taichi to denylist
  ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
  ASoC: SOF: sof-client: trivial: fix comment typo
  ASoC: dapm: fix clock get name
  ASoC: hdmi-codec: register hpd callback on component probe
  ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
  ASoC: da7219: Improve system suspend and resume handling
  ASoC: codecs: Modify macro value error
  ASoC: codecs: Modify the wrong judgment of re value
  ASoC: codecs: Modify the maximum value of calib
  ASoC: amd: acp: fix for i2s mode register field update
  ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb()
  ASoC: rt712-sdca: fix speaker route missing issue
  ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF
  ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings

amd-drm-next-6.7-2023-11-10:

amdgpu:
- SR-IOV fixes
- DMCUB fixes
- DCN3.5 fixes
- DP2 fixes
- SubVP fixes
- SMU14 fixes
- SDMA4.x fixes
- Suspend/resume fixes
- AGP regression fix
- UAF fixes for some error cases
- SMU 13.0.6 fixes
- Documentation fixes
- RAS fixes
- Hotplug fixes
- Scheduling entity ordering fix
- GPUVM fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com

Pull spi fixes from Mark Brown:
 "A couple of fixes that came in during the merge window: one Kconfig
  dependency fix and another fix for a long standing issue where a sync
  transfer races with system suspend"

* tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Fix null dereference on suspend
  spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix broken cache-flush support for Micron eMMCs
   - Revert 'mmc: core: Capture correct oemid-bits for eMMC cards'

  MMC host:
   - sdhci_am654: Fix TAP value parsing for legacy speed mode
   - sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
   - vub300: Fix an error path in probe"

* tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
  mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER
  Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
  mmc: vub300: fix an error code
  mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
  mmc: sdhci_am654: fix start loop index for TAP value parsing