- 27 Jan, 2018 9 commits
-
-
Bryant G. Ly authored
When enabling SR-IOV in pseries platform, the VF bar properties for a PF are reported on the device node in the device tree. This patch adds the IOV Bar resources to Linux structures from the device tree for later use when configuring SR-IOV by PF driver. Signed-off-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by:
Juan J. Alvarez <jjalvare@linux.vnet.ibm.com> Acked-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Bryant G. Ly authored
After initial validation of SR-IOV resources, firmware will associate PEs to the dynamic VFs created within this call. This patch adds the association of PEs to the PF array of PE numbers indexed by VF. Signed-off-by:
-
Bryant G. Ly authored
Introduce a method for notify resume to be called from sysfs. In this patch one can now call notify resume from sysfs when is supported by platform. Signed-off-by:
-
Bryant G. Ly authored
When pseries SR-IOV is enabled and after a PF driver has resumed from EEH, platform has to be notified of the event so the child VFs can be allowed to resume their normal recovery path. This patch makes the EEH operation allow unfreeze platform dependent code and adds the call to pseries EEH code. Signed-off-by:
-
Bryant G. Ly authored
To correctly use EEH code one has to make sure that the EEH_PE_VF is set for dynamic created VFs. Therefore this patch allocates an eeh_pe of eeh type EEH_PE_VF and associates PE with parent. Signed-off-by:
-
Bryant G. Ly authored
Devices can go offline when erors reported. This patch adds a change to the kernel object and lets udev know of error. When device resumes, a change is also set reporting device as online. Therefore, EEH and AER events are better propagated to user space for PCI devices in all arches. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
-
Bryant G. Ly authored
Add EEH platform operations for pseries to update VF config space. With this change after EEH, the VF will have updated config space for pseries platform. Signed-off-by:
-
Frederic Barrat authored
Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Frederic Barrat authored
ocxl.rst gives a quick, high-level view of opencapi. Update ioctl-number.txt to reflect ioctl numbers being used by the ocxl driver Signed-off-by:
-
- 24 Jan, 2018 11 commits
-
-
Frederic Barrat authored
The cxl driver currently declares in its table of supported PCI devices the class "Processing accelerators". Therefore it may be called to probe for opencapi devices, which generates errors, as the config space of a cxl device is not compatible with opencapi. So remove support for the generic class, as we now have (at least) two drivers for devices of the same class. Most cxl devices are FPGAs with a PSL which will show a known device ID of 0x477. Other devices are really supported by the cxlflash driver and are already listed in the table. So removing the class is expected to go unnoticed. Signed-off-by:
-
Frederic Barrat authored
OCXL_BASE triggers the platform support needed by the driver. Signed-off-by:
-
Frederic Barrat authored
Define a few trace points so that we can use the standard tracing mechanism for debug and/or monitoring. Signed-off-by:
-
Frederic Barrat authored
Some of the functions done by the generic driver should also be needed by other opencapi drivers: attaching a context to an adapter, translation fault handling, AFU interrupt allocation... So to avoid code duplication, the driver provides a kernel API that other drivers can use, similar to calling a in-kernel library. It is still a bit theoretical, for lack of real hardware, and will likely need adjustements down the road. But we used the cxlflash driver as a guinea pig. Signed-off-by:
-
Frederic Barrat authored
Add user APIs through ioctl to allocate, free, and be notified of an AFU interrupt. For opencapi, an AFU can trigger an interrupt on the host by sending a specific command targeting a 64-bit object handle. On POWER9, this is implemented by mapping a special page in the address space of a process and a write to that page will trigger an interrupt. Signed-off-by:
-
Frederic Barrat authored
Add an ocxl driver to handle generic opencapi devices. Of course, it's not meant to be the only opencapi driver, any device is free to implement its own. But if a host application only needs basic services like attaching to an opencapi adapter, have translation faults handled or allocate AFU interrupts, it should suffice. The AFU config space must follow the opencapi specification and use the expected vendor/device ID to be seen by the generic driver. The driver exposes the device AFUs as a char device in /dev/ocxl/ Note that the driver currently doesn't handle memory attached to the opencapi device. Signed-off-by:
Alastair D'Silva <alastair@d-silva.org> Signed-off-by:
-
Frederic Barrat authored
In the opencapi protocol, host memory contexts are referenced by a 'actag'. During setup, a driver must tell the device how many actags it can used, and what values are acceptable. On POWER9, the NPU can handle 64 actags per link, so they must be shared between all the PCI functions of the link. To get a global picture of how many actags are used by each AFU of every function, we capture some data at the end of PCI enumeration, so that actags can be shared fairly if needed. This is not powernv specific per say, but rather a consequence of the opencapi configuration specification being quite general. The number of available actags on POWER9 makes it more likely to be hit. This is somewhat mitigated by the fact that existing AFUs are coded by requesting a reasonable count of actags and existing devices carry only one AFU. Signed-off-by:
-
Frederic Barrat authored
Implement a few platform-specific calls which can be used by drivers: - provide the Transaction Layer capabilities of the host, so that the driver can find some common ground and configure the device and host appropriately. - provide the hw interrupt to be used for translation faults raised by the NPU - map/unmap some NPU mmio registers to get the fault context when the NPU raises an address translation fault The rest are wrappers around the previously-introduced opal calls. Signed-off-by:
-
Frederic Barrat authored
Add opal calls to interact with the NPU: OPAL_NPU_SPA_SETUP: set the Shared Process Area (SPA) The SPA is a table containing one entry (Process Element) per memory context which can be accessed by the opencapi device. OPAL_NPU_SPA_CLEAR_CACHE: clear the context cache The NPU keeps a cache of recently accessed memory contexts. When a Process Element is removed from the SPA, the cache for the link must be cleared. OPAL_NPU_TL_SET: configure the Transaction Layer The Transaction Layer specification defines several templates for messages to be exchanged on the link. During link setup, the host and device must negotiate what templates are supported on both sides and at what rates those messages can be sent. Signed-off-by:
-
Andrew Donnellan authored
The configuration space for opencapi devices doesn't have a PCI Express capability, therefore confusing linux in thinking it's of an old PCI type with a 256-byte configuration space size, instead of the desired 4k. So add a PCI fixup to declare the correct size. Signed-off-by:
-
Frederic Barrat authored
The NPU was already abstracted by opal as a virtual PHB for nvlink, but it helps to be able to differentiate between a nvlink or opencapi PHB, as it's not completely transparent to linux. In particular, PE assignment differs and we'll also need the information in later patches. So rename existing PNV_PHB_NPU type to PNV_PHB_NPU_NVLINK and add a new type PNV_PHB_NPU_OCAPI. Signed-off-by:
-
- 23 Jan, 2018 1 commit
-
-
Nicholas Piggin authored
The fallback RFI flush is used when firmware does not provide a way to flush the cache. It's a "displacement flush" that evicts useful data by displacing it with an uninteresting buffer. The flush has to take care to work with implementation specific cache replacment policies, so the recipe has been in flux. The initial slow but conservative approach is to touch all lines of a congruence class, with dependencies between each load. It has since been determined that a linear pattern of loads without dependencies is sufficient, and is significantly faster. Measuring the speed of a null syscall with RFI fallback flush enabled gives the relative improvement: P8 - 1.83x P9 - 1.75x The flush also becomes simpler and more adaptable to different cache geometries. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
- 22 Jan, 2018 1 commit
-
-
Nicholas Piggin authored
Platforms with a panic handler that halts the system can have problems getting kernel messages out, because the panic notifiers are called before kernel/panic.c does its flushing of printk buffers an console etc. This was attempted to be solved with commit a3b2cb30 ("powerpc: Do not call ppc_md.panic in fadump panic notifier"), but that wasn't the right approach and caused other problems, and was reverted by commit ab9dbf77. Instead, the powernv shutdown paths have already had a similar problem, fixed by taking the message flushing sequence from kernel/panic.c. That's a little bit ugly, but while we have the code duplicated, it will work for this case as well. So have ppc panic handlers do the same flushing before they terminate. Without this patch, a qemu pseries_le_defconfig guest stops silently when issued the nmi command when xmon is off and no crash dumpers enabled. Afterwards, an oops is printed by each CPU as expected. Fixes: ab9dbf77 ("Revert "powerpc: Do not call ppc_md.panic in fadump panic notifier"") Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
- 21 Jan, 2018 18 commits
-
-
Gustavo Romero authored
Add a selftest to check if endianness is flipped inadvertently to BE (MSR.LE set to zero) on BE and LE machines when a trap is caught in transactional mode and load_fp and load_vec are zero, i.e. when MSR.FP and MSR.VEC are zeroed (disabled). Signed-off-by:
Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by:
-
Gustavo Romero authored
Currently it's possible that a thread on PPC64 LE has its endianness flipped inadvertently to Big-Endian resulting in a crash once the process is back from the signal handler. If giveup_all() is called when regs->msr has the bits MSR.FP and MSR.VEC disabled (and hence MSR.VSX disabled too) it returns without calling check_if_tm_restore_required() which copies regs->msr to ckpt_regs->msr if the process caught a signal whilst in transactional mode. Then once in setup_tm_sigcontexts() MSR from ckpt_regs.msr is used, but since check_if_tm_restore_required() was not called previuosly, gp_regs[PT_MSR] gets a copy of invalid MSR bits as MSR in ckpt_regs was not updated from regs->msr and so is zeroed. Later when leaving the signal handler once in sys_rt_sigreturn() the TS bits of gp_regs[PT_MSR] are checked to determine if restore_tm_sigcontexts() must be called to pull in the correct MSR state into the user context. Because TS bits are zeroed restore_tm_sigcontexts() is never called and MSR restored from the user context on returning from the signal handler has the MSR.LE (the endianness bit) forced to zero (Big-Endian). That leads, for instance, to 'nop' being treated as an illegal instruction in the following sequence: tbegin. beq 1f trap tend. 1: nop on PPC64 LE machines and the process dies just after returning from the signal handler. PPC64 BE is also affected but in a subtle way since forcing Big-Endian on a BE machine does not change the endianness. This commit fixes the issue described above by ensuring that once in setup_tm_sigcontexts() the MSR used is from regs->msr instead of from ckpt_regs->msr and by ensuring that we pull in only the MSR.FP, MSR.VEC, and MSR.VSX bits from ckpt_regs->msr. The fix was tested both on LE and BE machines and no regression regarding the powerpc/tm selftests was observed. Signed-off-by:
-
Anton Blanchard authored
The thread switch control register (TSCR) is a per core register that configures how the CPU shares resources between SMT threads. Exposing it via sysfs allows us to tune it at run time. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Mahesh Salgaonkar authored
radix__flush_tlb_all() is called only in kexec path in real mode and any tracepoints at this stage will make kexec to fail if enabled. To verify enable tlbie trace before kexec. $ echo 1 > /sys/kernel/debug/tracing/events/powerpc/tlbie/enable == kexec into new kernel and kexec fails. Fix this by not calling trace_tlbie from radix__flush_tlb_all(). Fixes: 0428491c ("powerpc/mm: Trace tlbie(l) instructions") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Guilherme G. Piccoli authored
During a kdump kernel boot in PowerPC, we request a reset of the PHBs to the FW. It makes sense, since if we are booting a kdump kernel it means we had some trouble before and we cannot rely in the adapters' health; they could be in a bad state, hence the reset is needed. But this reset is useful not only in kdump - there are situations, specially when debugging drivers, that we could break an adapter in a way it requires such reset. One can tell to just go ahead and reboot the machine, but happens that many times doing kexec is much faster, and so preferable than a full power cycle. This patch adds the ppc_pci_reset_phbs parameter to perform such reset. Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
-
David Gibson authored
As of 438cc81a "powerpc/pseries: Automatically resize HPT for memory hot add/remove" when running on the pseries platform, we always attempt to use the PAPR extension to resize the hashed page table (HPT) when we add or remove memory. This is fine, but when the extension is available we'll give a harmless, but scary warning. This patch suppresses the warning in this case. It will still warn if the feature is supposed to be available, but didn't work. Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Andrew Donnellan authored
Add a selftest to exercise the powerpc alignment fault handler. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Russell Currey authored
Symbolic macros are unintuitive and hard to read, whereas octal constants are much easier to interpret. Replace macros for the basic permission flags (user/group/other read/write/execute) with numeric constants instead, across the whole powerpc tree. Introducing a significant number of changes across the tree for no runtime benefit isn't exactly desirable, but so long as these macros are still used in the tree people will keep sending patches that add them. Not only are they hard to parse at a glance, there are multiple ways of coming to the same value (as you can see with 0444 and 0644 in this patch) which hurts readability. Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
-
Mathieu Malaterre authored
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation") Reported-by:David Daney <ddaney@caviumnetworks.com> Suggested-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Mathieu Malaterre authored
Fix warning: drivers/macintosh/via-pmu-backlight.c: In function ‘pmu_backlight_init’: drivers/macintosh/via-pmu-backlight.c:140:13: warning: old-style function definition [-Wold-style-definition] void __init pmu_backlight_init() ^~~~~~~~~~~~~~~~~~ Signed-off-by:Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Mathieu Malaterre authored
Fix warnings such as: arch/powerpc/platforms/powermac/backlight.c: In function ‘pmac_backlight_get_legacy_brightness’: arch/powerpc/platforms/powermac/backlight.c:189:5: error: old-style function definition [-Werror=old-style-definition] int pmac_backlight_get_legacy_brightness() ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Mathieu Malaterre authored
In commit 5b102782 ("powerpc/xmon: Enable disassembly files (compilation changes)") usage of variable `op` has been removed. Completely remove opcode computation since not used anymore. Fix fatal warning: arch/powerpc/xmon/ppc-dis.c: In function ‘lookup_powerpc’: arch/powerpc/xmon/ppc-dis.c:96:17: error: variable ‘op’ set but not used [-Werror=unused-but-set-variable] unsigned long op; ^~ Signed-off-by:
-
Mathieu Malaterre authored
Fix fatal warning during compilation: In file included from arch/powerpc/xmon/xmon.c:54:0: ./arch/powerpc/include/asm/xive.h:157:20: error: no previous prototype for ‘xive_smp_prepare_cpu’ [-Werror=missing-prototypes] extern inline int xive_smp_prepare_cpu(unsigned int cpu) { return -EINVAL; } ^ Signed-off-by:Cédric Le Goater <clg@kaod.org> Signed-off-by:
-
Aneesh Kumar K.V authored
This patch adds --pgfault and --iterations options to mmap_bench test. With --pgfault we touch every page mapped. This helps in measuring impact in the page fault path with a patch series. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
One of the easiest way to test config with 4K HPTE is to disable 64K hardware page size like below. int __init htab_dt_scan_page_sizes(unsigned long node, size -= 3; prop += 3; base_idx = get_idx_from_shift(base_shift); - if (base_idx < 0) { + if (base_idx < 0 || base_idx == MMU_PAGE_64K) { /* skip the pte encoding also */ prop += lpnum * 2; size -= lpnum * 2; But then this results in error in other part of the code such as MPSS parsing where we look at 4K base page size and 64K actual page size support. This patch fix MPSS parsing by ignoring the actual page sizes marked unsupported. In reality this can happen only with a corrupt device tree. But it is good to tighten the error check. Signed-off-by: -
https://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linuxMichael Ellerman authored
Freescale updates from Scott: "Contains fixes for CPM GPIO and an FSL PCI erratum workaround, plus a minor cleanup patch."
-
Michael Ellerman authored
Merge our fixes branch from the 4.15 cycle. Unusually the fixes branch saw some significant features merged, notably the RFI flush patches, so we want the code in next to be tested against that, to avoid any surprises when the two are merged. There's also some other work on the panic handling that was reverted in fixes and we now want to do properly in next, which would conflict. And we also fix a few other minor merge conflicts.
-
