- 08 May, 2020 5 commits
-
-
Chris Wilson authored
The downside of using semaphores is that we lose metadata passing along the signaling chain. This is particularly nasty when we need to pass along a fatal error such as EFAULT or EDEADLK. For fatal errors we want to scrub the request before it is executed, which means that we cannot preload the request onto HW and have it wait upon a semaphore. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200508092933.738-3-chris@chris-wilson.co.uk
-
Lionel Landwerlin authored
To allow faster engine to engine synchronization, peel the layer of dma-fence-chain to expose potential i915 fences so that the i915_request code can emit HW semaphore wait/signal operations in the ring which is faster than waking up the host to submit unblocked workloads after interrupt notification. This is similar to the peeling we do for e.g. dma_fence_array. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
-
Chris Wilson authored
The kernel_context does not use initial-breadcrumbs, so when we ask if its requests have started we do so by comparing against the completion seqno of the previous request. This is very imprecise, not precise enough for the defer_request assertion. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1847Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200508104220.9872-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
As a means for a small code consolidation, but primarily to start thinking more carefully about internal-vs-external linkage, pull the pair of i915_sw_fence_await_dma_fence() calls into a common routine. Signed-off-by:
-
Chris Wilson authored
While we ordinarily do not skip submit-fences due to the accompanying hook that we want to callback on execution, a submit-fence on the same timeline is meaningless. Signed-off-by:
-
- 07 May, 2020 7 commits
-
-
Mika Kuoppala authored
All engines, exception being blitter as it does not care about the form, can access compressed surfaces. So we need to add forced aux table invalidates for those engines. v2: virtual instance masking (Chris) v3: bug on if not found (Chris) References: d248b371 ("drm/i915/gen12: Invalidate aux table entries forcibly") References bspec#43904, hsdes#1809175790 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chuansheng Liu <chuansheng.liu@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Signed-off-by:
-
Chris Wilson authored
Upon waiting a request (when asked), we gave that request a small priority boost, not enough for it to cause preemption, but enough for it to be scheduled next before all equals. We also used that bit to give new clients a small priority boost, similar to FQ_CODEL, such that we favoured short interactive tasks ahead of long running streams. However, this is causing lots of complications with timeslicing where we both want to honour the boost and yet ignore it. Those complications cause unexpected user behaviour (tasks not being timesliced and run concurrently as epxected), and the easiest way to resolve that is to remove the boost. Hopefully, we can find a compromise again if we need to, but in theory timeslicing itself and future more advanced schedulers should give us the interactivity boost we seek. Testcase: igt/gem_exec_schedule/lateslice Signed-off-by:
-
Chris Wilson authored
We recorded the dependencies for WAIT_FOR_SUBMIT in order that we could correctly perform priority inheritance from the parallel branches to the common trunk. However, for the purpose of timeslicing and reset handling, the dependency is weak -- as we the pair of requests are allowed to run in parallel and not in strict succession. The real significance though is that this allows us to rearrange groups of WAIT_FOR_SUBMIT linked requests along the single engine, and so can resolve user level inter-batch scheduling dependencies from user semaphores. Fixes: c81471f5 ("drm/i915: Copy across scheduler behaviour flags across submit fences") Testcase: igt/gem_exec_fence/submit Signed-off-by:
-
Mika Kuoppala authored
Aux table invalidation can fail on update. So next access may cause memory access to be into stale entry. Proposed workaround is to invalidate entries between all batchbuffers. v2: correct register address (Yang) v3: respect the order (Chris) References bspec#43904, hsdes#1809175790 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chuansheng Liu <chuansheng.liu@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Yang A Shi <yang.a.shi@intel.com> Signed-off-by:
-
Mika Kuoppala authored
Flush TDL,L3 and EUs Signed-off-by:
-
Mika Kuoppala authored
HDC pipeline flush is bit on the first dword of the PIPE_CONTROL, not the second. Make it so. v2: function naming (Chris) Signed-off-by:
-
Mika Kuoppala authored
This reverts commit 62037fff. L3 ro cache invalidation is part of the dword0 of pipe control. Also it is not relevant to this gen. Signed-off-by:
-
- 06 May, 2020 1 commit
-
-
Chris Wilson authored
We need to preserve fatal errors from fences that are being terminated as we hook them up. Fixes: ef468849 ("drm/i915: Propagate fence errors") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200506162136.3325-1-chris@chris-wilson.co.uk
-
- 05 May, 2020 6 commits
-
-
Matt Roper authored
We need to toggle a SDE chicken bit on and then off as the final step when disabling interrupts in preparation for runtime suspend. Bspec: 33450 Bspec: 8402 Cc: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200501213701.371443-1-matthew.d.roper@intel.comReviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com>
-
Chris Wilson authored
As we only restore the default context state upon banning a context, we only need enough of the state to run the ring and nothing more. That is we only need our bare protocontext. Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200504180745.15645-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we cannot trust the reset will flush out the CS event queue such that process_csb() reports an accurate view of HW, we will need to search the active and pending contexts to determine which was actually running at the time we issued the reset. Signed-off-by:
-
Stanislav Lisovskiy authored
We need a new PCode request commands and reply codes to be added as a prepartion patch for QGV points restricting for new SAGV support. v2: - Extracted those changes into separate patch (Ville Syrjälä) v3: - Moved new PCode masks to another place from PCode commands(Ville) v4: - Moved new PCode masks to correspondent PCode command, with identation(Ville) - Changed naming to ICL_ instead of GEN11_ to fit more nicely into existing definition style. Signed-off-by:Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200505102247.32452-5-stanislav.lisovskiy@intel.com
-
Imre Deak authored
Unmask/enable AUX interrupts on all ports on TGL+. So far the interrupts worked only on port A, which meant each transaction on other ports took 10ms. Cc: <stable@vger.kernel.org> # v5.4+ Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Chris Wilson authored
Use a local to shrink a line under 80 columns, and refactor the common emit_xcs_breadcrumb() wrapper of ggtt-write. Signed-off-by:
-
- 04 May, 2020 15 commits
-
-
Chris Wilson authored
Repeat the measurement of the clock frequency a few times and use the median to try and reduce the systematic measurement error. Signed-off-by:
-
Chris Wilson authored
If the FBC is still writing into stolen, it will overwrite any future users of that stolen region. Check before release, just to ease any concerns -- we can remove it again later if it is barking up the wrong tree. References: https://gitlab.freedesktop.org/drm/intel/-/issues/1635Signed-off-by:
-
Sultan Alsawaf authored
In commit 5a7d202b, a logical AND was erroneously changed to an OR, causing WaIncreaseLatencyIPCEnabled to be enabled unconditionally for kabylake and coffeelake, even when IPC is disabled. Fix the logic so that WaIncreaseLatencyIPCEnabled is only used when IPC is enabled. Fixes: 5a7d202b ("drm/i915: Drop WaIncreaseLatencyIPCEnabled/1140 for cnl") Cc: stable@vger.kernel.org # 5.3.x+ Signed-off-by:
Sultan Alsawaf <sultan@kerneltoast.com> Signed-off-by:
-
Ville Syrjälä authored
All these ROUNDING_FACTORs and whatnot are making this thing hard to read. Get rid of them. And let's massage some of the fractions to give us less questionable intermediate results and perhaps less divisions. Also looks like a good helping of 64bit math stuff is needed to avoid some of overflows present in the current code. There might still be a few overflows, namely when calculating link_clks_available/samples_room (would require a huge hblank though), and potentially when calculating hblank_rise (not sure how large link_clks_active can get). It looks like we're still not calculating exactly what the spec says since we truncate tu_data and tu_line early. But I'm too lazy to figure out if we could avoid that. v2: Fix typo in commit msg (Uma) Remove ROUNDING_FACTOR define (Uma) s/5*link_clk+5*cdclk/5*(link_clk+cdclk)/ (Chris) Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by:Uma Shankar <uma.shankar@intel.com>
-
Ville Syrjälä authored
Since the code seems insistent on using the variable names from the bspec formulat, let's be consistent and use those names for all the things. For some reason 'link_clk' and 'lanes' were left out in the code until now. Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Ville Syrjälä authored
mode.vrefresh is rounded to the nearest integer. You don't want to use it anywhere that requires precision. Also I want to nuke it. vtotal*vrefresh == 1000*clock/htotal, so let's use the latter. Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Remove all the stepping dependent cnl workarounds. Bspec lists more steppings than this so presumably these are classed as pre-production. And this is cnl after all so no one should really care anyway. Signed-off-by:
-
Ville Syrjälä authored
Display WA #1105 says that FBC requires PLANE_STRIDE to be a multiple of 512 bytes on gen9 and glk. This is definitely true for glk as certain tests (such as igt/kms_big_fb/linear-16bpp-rotate-0) are now failing when the display resolution results in a plane stride which is not a multiple of 512 bytes. Curiously I was not able to reproduce this on a KBL. First I suspected that our use of the FBC override stride explain this, but after trying to use the override stride on glk the test still failed. I did try both the old CHICKEN_MISC_4 way and the new FBC_STRIDE way, neither had any effect on the result. Anyways, we need this at least on glk. But let's trust the spec and apply the w/a for all gen9 as well, despite being unable to reproduce the problem. v2: s/FBC_CHICKEN/FBC_STRIDE/ in commit msg Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: 691f7ba5 ("drm/i915/display/fbc: Make fences a nice-to-have for GEN9+") Signed-off-by:
-
Stanislav Lisovskiy authored
That is a preparation patch before next one where we introduce old_bw_state and a bunch of other changes as well. In a review comment it was suggested to split out at least that renaming into a separate patch, what is done here. v2: Removed spurious space Reviewed-by:
-
Stanislav Lisovskiy authored
We need to calculate SAGV mask also in a non-modeset commit, however currently active_pipes are only calculated for modesets in global atomic state, thus now we will be tracking those also in bw_state in order to be able to properly access global data. v2: - Removed pre/post plane SAGV updates from modeset(Ville) - Now tracking active pipes in intel_can_enable_sagv(Ville) v3: - lock global state if active_pipes change as well(Ville) Signed-off-by: -
Stanislav Lisovskiy authored
Future platforms require per-crtc SAGV evaluation and serializing global state when those are changed from different commits. v2: - Add has_sagv check to intel_crtc_can_enable_sagv so that it sets bit in reject mask. - Use bw_state in intel_pre/post_plane_enable_sagv instead of atomic state v3: - Fixed rebase conflict, now using intel_atomic_crtc_state_for_each_plane_state in order to call it from atomic check v4: - Use fb modifier from plane state v5: - Make intel_has_sagv static again(Ville) - Removed unnecessary NULL assignments(Ville) - Removed unnecessary SAGV debug(Ville) - Call intel_compute_sagv_mask only for modesets(Ville) - Serialize global state only if sagv results change, but not mask itself(Ville) v6: - use lock global state instead of serialize(Ville) v7: - use both global state lock and serialize depending on if we need to change only global state or access hw (Ville) Signed-off-by: -
Chris Wilson authored
The older arches did not convert MI_STORE_DATA_IMM to using the GTT, but left them writing to a physical address. The notes suggest that the primary reason would be so that the writes were cache coherent, as the CPU cache uses physical tagging. As such we did not implement the legacy variant of MI_STORE_DATA_IMM and so left all the relocations synchronous -- but with a small function to convert from the vma address into the physical address, we can implement asynchronous relocs on these older arches, fixing up a few tests that require them. In order to be able to test the legacy paths, refactor the gpu relocations so that we can hook them up to a selftest. v2: Use an array of offsets not enum labels for the selftest v3: Refactor the common igt_hexdump() Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/757Signed-off-by:
-
Chris Wilson authored
It is required that a chained batch be in the same address domain as its parent, and also that must be specified in the command for earlier gen as it is not inferred from the chaining until gen6. Fixes: 964a9b0f ("drm/i915/gem: Use chained reloc batches") Signed-off-by:
-
Chris Wilson authored
Extend the timeout for pcode reads to 20ms as they should not be performed along critical paths, and succeeding after a short delay is better than failing entirely. References: https://gitlab.freedesktop.org/drm/intel/-/issues/1800Signed-off-by:
-
Chris Wilson authored
We only need the device wakeref on freeing the objects if we have to unbind the object from the global GTT, or otherwise update device information. If the objects are clean, we never need the wakeref, so avoid taking until required. Signed-off-by:
Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200503171513.18704-1-chris@chris-wilson.co.uk
-
- 03 May, 2020 1 commit
-
-
Chris Wilson authored
Currently we clear and disable the RPS pm interrupts on module load, and presume that they remain disabled forevermore. However, the mask is cleared on suspend and so after resume they may start showing up again unexepectedly. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1811 Fixes: 8e99299a ("drm/i915/gt: Track use of RPS interrupts in flags") Signed-off-by:
Andi Shyti <andi@etezian.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200502173512.32353-1-chris@chris-wilson.co.uk
-
- 01 May, 2020 5 commits
-
-
Chris Wilson authored
If at first we don't succeed, try try again. Not all engines may support the MI ops we need to perform asynchronous relocation patching, and so we end up falling back to a synchronous operation that has a liability of blocking. However, Tvrtko pointed out we don't need to use the same engine to perform the relocations as we are planning to execute the execbuf on, and so if we switch over to a working engine, we can perform the relocation asynchronously. The user execbuf will be queued after the relocations by virtue of fencing. This patch creates a new context per execbuf requiring asynchronous relocations on an unusable engines. This is perhaps a bit excessive and can be ameliorated by a small context cache, but for the moment we only need it for working around a little used engine on Sandybridge, and only if relocations are actually required to an active batch buffer. Now we just need to teach the relocation code to handle physical addressing for gen2/3, and we should then have universal support! Suggested-by:
-
Chris Wilson authored
As we can now keep chaining together a relocation batch to process any number of relocations, we can keep building that relocation batch for all of the target vma. This avoiding emitting a new request into the ring for each target, consuming precious ring space and a potential stall. v2: Propagate the failure from submitting the relocation batch. Testcase: igt/gem_exec_reloc/basic-wide-active Signed-off-by:
-
Chris Wilson authored
The ring is a precious resource: we anticipate to only use a few hundred bytes for a request, and only try to reserve that before we start. If we go beyond our guess in building the request, then instead of waiting at the start of execbuf before we hold any locks or other resources, we may trigger a wait inside a critical region. One example is in using gpu relocations, where currently we emit a new MI_BB_START from the ring every time we overflow a page of relocation entries. However, instead of insert the command into the precious ring, we can chain the next page of relocation entries as MI_BB_START from the end of the previous. v2: Delay the emit_bb_start until after all the chained vma synchronisation is complete. Since the buffer pool batches are idle, this _should_ be a no-op, but one day we may some fancy async GPU bindings for new vma! v3: Use pool/batch consitently, once we start thinking in terms of the batch vma, use batch->obj. v4: Explain the magic number 4. Tvrtko spotted that we lose propagation of the error for failing to submit the relocation request; that's easier to fix up in the next patch. Testcase: igt/gem_exec_reloc/basic-many-active Signed-off-by:
-
Chris Wilson authored
gdb uses ptrace() to peek and poke bytes of the target's address space. The driver must implement an vm_ops->access() handler or else gdb will be unable to inspect the pointer and report it as out-of-bounds. Worse than useless as it causes immediate suspicion of the valid GTT pointer, distracting the poor programmer trying to find his bug. v2: Write-protect readonly objects (Matthew). Testcase: igt/gem_mmap_gtt/ptrace Testcase: igt/gem_mmap_offset/ptrace Suggested-by:
Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by:
-
Chris Wilson authored
In order to allow userspace to rely on timeslicing to reorder their batches, we must support preemption of those user batches. Declare timeslicing as an explicit property that is a combination of having the kernel support and HW support. Suggested-by:
-
