- 24 Apr, 2018 31 commits
-
-
Kieran Bingham authored
commit 639fa43d upstream. When a BRx is provided by a pipeline, the WPF must determine the master layer. Currently the condition to check this identifies pipe->bru || pipe->num_inputs > 1. The code then moves on to dereference pipe->bru, thus the check fails static analysers on the possibility that pipe->num_inputs could be greater than 1 without pipe->bru being set. The reality is that the pipeline must have a BRx to support more than one input, thus this could never cause a fault - however it also identifies that the num_inputs > 1 check is redundant. Remove the redundant check - and always configure the master layer appropriately when we have a BRx configured in our pipeline. Fixes: 6134148f ("v4l: vsp1: Add support for the BRS entity") Cc: stable@vger.kernel.org Suggested-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans Verkuil authored
commit ed356f11 upstream. If CEC is not enabled for the vivid driver, then the adap pointer is NULL and 'adap->phys_addr' will fail. Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
commit 57e6b6f2 upstream. The atomisp_compat_ioctl32() code has problems. This patch disables the compat_ioctl32 support until those issues have been fixed. Contact Sakari or me for more details. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Jarkko Nikula authored
commit 613bd1ea upstream. Commit 9b61e302 (spi: Pick spi bus number from Linux idr or spi alias) ceased to unregister SPI buses with fixed bus numbers. Moreover this is visible only if CONFIG_SPI_DEBUG=y is set or when trying to re-register the same SPI controller. rmmod spi_pxa2xx_platform (with CONFIG_SPI_DEBUG=y): [ 26.788362] spi_master spi1: attempting to delete unregistered controller [spi1] modprobe spi_pxa2xx_platform: [ 37.883137] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:19.0/pxa2xx-spi.12/spi_master/spi1' [ 37.894984] CPU: 1 PID: 1467 Comm: modprobe Not tainted 4.16.0-rc4+ #21 [ 37.902384] Call Trace: ... [ 38.122680] kobject_add_internal failed for spi1 with -EEXIST, don't try to register things with the same name in the same directory. [ 38.136154] WARNING: CPU: 1 PID: 1467 at lib/kobject.c:238 kobject_add_internal+0x2a5/0x2f0 ... [ 38.513817] pxa2xx-spi pxa2xx-spi.12: problem registering spi master [ 38.521036] pxa2xx-spi: probe of pxa2xx-spi.12 failed with error -17 Fix this by not returning immediately from spi_unregister_controller() if idr_find() doesn't find controller with given ID/bus number. It finds only those controllers that were registered with dynamic SPI bus numbers. Only conditional cleanup between dynamic and fixed bus numbers is to remove allocated IDR. Fixes: 9b61e302 (spi: Pick spi bus number from Linux idr or spi alias) Cc: stable@vger.kernel.org Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Maxime Chevallier authored
commit ce99319a upstream. When SPI transfers can be offloaded using DMA, the SPI core need to build a scatterlist to make sure that the buffer to be transferred is dma-able. This patch fixes the scatterlist entry size computation in the case where the maximum acceptable scatterlist entry supported by the DMA controller is less than PAGE_SIZE, when the buffer is vmalloced. For each entry, the actual size is given by the minimum between the desc_len (which is the max buffer size supported by the DMA controller) and the remaining buffer length until we cross a page boundary. Fixes: 65598c13 ("spi: Fix per-page mapping of unaligned vmalloc-ed buffer") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Eugen Hristev authored
commit 9581329e upstream. The datasheet recommends initializing FIFOs before SPI enable. If we do not do it like this, there may be a strange behavior. We noticed that DMA does not work properly with FIFOs if we do not clear them beforehand or enable them before SPIEN. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Santiago Esteban authored
commit 9a06757d upstream. The compatible string is incorrect. Add atmel,sama5d3-pinctrl since it's the appropriate compatible string. Remove the atmel,at91rm9200-pinctrl compatible string, this fallback is useless, there are too many changes. Signed-off-by:
Santiago Esteban <Santiago.Esteban@microchip.com> Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Cc: stable@vger.kernel.org #v3.18 Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Marek Szyprowski authored
commit 6f487075 upstream. The proper name for the property, which assign given device to IOMMU is 'iommus', not 'iommu'. Fix incorrect name and let all GScaler devices to be properly handled when IOMMU support is enabled. Reported-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 6cbfdd73 ("ARM: dts: add sysmmu nodes for exynos5250") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Nicolas Ferre authored
commit e8fd0adf upstream. There are only 19 PIOB pins having primary names PB0-PB18. Not all of them have a 'C' function. So the pinctrl property mask ends up being the same as the other SoC of the at91sam9x5 series. Reported-by:
Marek Sieranski <marek.sieranski@microchip.com> Signed-off-by:
-
Sean Wang authored
commit 0629a019 upstream. Fix that USB initialization fails as below runtime log is present during booting on bananapi-r2 board by adding missing regulators the USB device requires. Current regulators USB device uses are being updated with the correct ones to reflect real configurations which are all from fixed regulators rather than MT6323 one's output. xhci-mtk 1a1c0000.usb: 1a1c0000.usb supply vbus not found, using dummy regulator xhci-mtk 1a240000.usb: 1a240000.usb supply vbus not found, using dummy regulator Cc: stable@vger.kernel.org Fixes: f4ff257c ("arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board") Signed-off-by:
Sean Wang <sean.wang@mediatek.com> [mb: update kernel log in commit message] Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Marek Szyprowski authored
commit a7480dbc upstream. Since commit 04c8b0f8 ("irqchip/gic: Make locking a BL_SWITCHER only feature") coupled CPU idle freezes from time to time on Exynos4210. Later commit 313c8c16 ("PM / CPU: replace raw_notifier with atomic_notifier") changed the context in which the CPU idle code is executed, what results in fully reproducible freeze all the time. However, almost the same coupled CPU idle code works fine on Exynos3250 regardless of the changes made in the mentioned commits. It turned out that the IPI call used on Exynos4210 is conflicting with the change done in the first mentioned commit in GIC. Fix this by using the same code path as for Exynos3250, instead of the IPI call for synchronization with second CPU core, call dsb_sev() directly. Tested on Exynos4210-based Trats and Origen boards. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
David Lechner authored
commit c5a88cd2 upstream. This fixes the battery voltage monitoring gpio-hog settings. When the gpio is low, it turns off the battery voltage to the ADC chip. However, this needs to be on all of the time so that we can monitor battery voltage. Also, there was a typo that prevented pinmuxing from working correctly. Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Marc Zyngier authored
commit 7d8b44c5 upstream. vgic_copy_lpi_list() parses the LPI list and picks LPIs targeting a given vcpu. We allocate the array containing the intids before taking the lpi_list_lock, which means we can have an array size that is not equal to the number of LPIs. This is particularly obvious when looking at the path coming from vgic_enable_lpis, which is not a command, and thus can run in parallel with commands: vcpu 0: vcpu 1: vgic_enable_lpis its_sync_lpi_pending_table vgic_copy_lpi_list intids = kmalloc_array(irq_count) MAPI(lpi targeting vcpu 0) list_for_each_entry(lpi_list_head) intids[i++] = irq->intid; At that stage, we will happily overrun the intids array. Boo. An easy fix is is to break once the array is full. The MAPI command will update the config anyway, and we won't miss a thing. We also make sure that lpi_list_count is read exactly once, so that further updates of that value will not affect the array bound check. Cc: stable@vger.kernel.org Fixes: ccb1d791 ("KVM: arm64: vgic-its: Fix pending table sync") Reviewed-by:
Andre Przywara <andre.przywara@arm.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
-
Jerome Brunet authored
commit c04ffa71 upstream. Different modules maybe installed by the user on the eMMC connector of the odroid-c2. While the red modules are working without an issue, it seems some black modules (apparently Samsung based) are having issue at 200MHz While the tuning algorithm introduced in v4.14 enables high speed modes on every other tested designs, it seems a problem remains for this particular combination of board and eMMC module. Lowering the maximum frequency of the eMMC on this board until we can figure out a better solution. Fixes: d341ca88 ("mmc: meson-gx: rework tuning function") Suggested-by:
Ellie Reeves <ellierevves@gmail.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Felipe Balbi authored
commit eaa358c7 upstream. Mention that ->complete() should never be called from within usb_ep_queue(). Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Chen-Yu Tsai authored
commit d7119224 upstream. The AXP223 PMIC, like the AXP221, does not generate VBUS change interrupts when N_VBUSEN is used to drive VBUS for the OTG port on the board. This was not noticed until recently, as most A23/A33 boards use a GPIO pin that does not support interrupts for OTG ID detection. This forces the driver to use polling. However the A33-OlinuXino uses a pin that does support interrupts, so the driver uses them. However the VBUS interrupt never fires, and the driver never gets to update the VBUS status. This results in musb timing out waiting for VBUS to rise. This was worked around for the AXP221 by resorting to polling changes in commit 91d96f06 ("phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31"). This patch adds the A23 and A33 to the list of SoCs that need the workaround. Fixes: fc1f45ed ("phy-sun4i-usb: Add support for the usb-phys on the sun8i-a33 SoC") Fixes: 123dfdbc ("phy-sun4i-usb: Add support for the usb-phys on the sun8i-a23 SoC") Cc: <stable@vger.kernel.org> # 4.3.x: 68dbc2ce phy-sun4i-usb: Use of_match_node to get model specific config data Cc: <stable@vger.kernel.org> # 4.3.x: 5cf700ac phy: phy-sun4i-usb: Fix optional gpios failing probe Cc: <stable@vger.kernel.org> # 4.3.x: 04e59a02 phy-sun4i-usb: Fix irq free conditions to match request conditions Cc: <stable@vger.kernel.org> # 4.3.x: 91d96f06 phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31 Cc: <stable@vger.kernel.org> # 4.3.x Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Heinrich Schuchardt authored
commit af6f8529 upstream. musb->endpoints[] has array size MUSB_C_NUM_EPS. We must check array bounds before accessing the array and not afterwards. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
Bin Liu <b-liu@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Vlastimil Babka authored
commit a9f2a846 upstream. cache_reap() is initially scheduled in start_cpu_timer() via schedule_delayed_work_on(). But then the next iterations are scheduled via schedule_delayed_work(), i.e. using WORK_CPU_UNBOUND. Thus since commit ef557180 ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs") there is no guarantee the future iterations will run on the originally intended cpu, although it's still preferred. I was able to demonstrate this with /sys/module/workqueue/parameters/debug_force_rr_cpu. IIUC, it may also happen due to migrating timers in nohz context. As a result, some cpu's would be calling cache_reap() more frequently and others never. This patch uses schedule_delayed_work_on() with the current cpu when scheduling the next iteration. Link: http://lkml.kernel.org/r/20180411070007.32225-1-vbabka@suse.cz Fixes: ef557180 ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Pekka Enberg <penberg@kernel.org> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Boyd <sboyd@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Biggers authored
commit 3f05317d upstream. syzbot reported a use-after-free of shm_file_data(file)->file->f_op in shm_get_unmapped_area(), called via sys_remap_file_pages(). Unfortunately it couldn't generate a reproducer, but I found a bug which I think caused it. When remap_file_pages() is passed a full System V shared memory segment, the memory is first unmapped, then a new map is created using the ->vm_file. Between these steps, the shm ID can be removed and reused for a new shm segment. But, shm_mmap() only checks whether the ID is currently valid before calling the underlying file's ->mmap(); it doesn't check whether it was reused. Thus it can use the wrong underlying file, one that was already freed. Fix this by making the "outer" shm file (the one that gets put in ->vm_file) hold a reference to the real shm file, and by making __shm_open() require that the file associated with the shm ID matches the one associated with the "outer" file. Taking the reference to the real shm file is needed to fully solve the problem, since otherwise sfd->file could point to a freed file, which then could be reallocated for the reused shm ID, causing the wrong shm segment to be mapped (and without the required permission checks). Commit 1ac0b6de ("ipc/shm: handle removed segments gracefully in shm_mmap()") almost fixed this bug, but it didn't go far enough because it didn't consider the case where the shm ID is reused. The following program usually reproduces this bug: #include <stdlib.h> #include <sys/shm.h> #include <sys/syscall.h> #include <unistd.h> int main() { int is_parent = (fork() != 0); srand(getpid()); for (;;) { int id = shmget(0xF00F, 4096, IPC_CREAT|0700); if (is_parent) { void *addr = shmat(id, NULL, 0); usleep(rand() % 50); while (!syscall(__NR_remap_file_pages, addr, 4096, 0, 0, 0)); } else { usleep(rand() % 50); shmctl(id, IPC_RMID, NULL); } } } It causes the following NULL pointer dereference due to a 'struct file' being used while it's being freed. (I couldn't actually get a KASAN use-after-free splat like in the syzbot report. But I think it's possible with this bug; it would just take a more extraordinary race...) BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 9 PID: 258 Comm: syz_ipc Not tainted 4.16.0-05140-gf8cf2f16 #189 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 RIP: 0010:d_inode include/linux/dcache.h:519 [inline] RIP: 0010:touch_atime+0x25/0xd0 fs/inode.c:1724 [...] Call Trace: file_accessed include/linux/fs.h:2063 [inline] shmem_mmap+0x25/0x40 mm/shmem.c:2149 call_mmap include/linux/fs.h:1789 [inline] shm_mmap+0x34/0x80 ipc/shm.c:465 call_mmap include/linux/fs.h:1789 [inline] mmap_region+0x309/0x5b0 mm/mmap.c:1712 do_mmap+0x294/0x4a0 mm/mmap.c:1483 do_mmap_pgoff include/linux/mm.h:2235 [inline] SYSC_remap_file_pages mm/mmap.c:2853 [inline] SyS_remap_file_pages+0x232/0x310 mm/mmap.c:2769 do_syscall_64+0x64/0x1a0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ebiggers@google.com: add comment] Link: http://lkml.kernel.org/r/20180410192850.235835-1-ebiggers3@gmail.com Link: http://lkml.kernel.org/r/20180409043039.28915-1-ebiggers3@gmail.com Reported-by: syzbot+d11f321e7f1923157eac80aa990b446596f46439@syzkaller.appspotmail.com Fixes: c8d78c18 ("mm: replace remap_file_pages() syscall with emulation") Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 60bb83b8 upstream. We've got a bug report indicating a kernel panic at booting on an x86-32 system, and it turned out to be the invalid PCI resource assigned after reallocation. __find_resource() first aligns the resource start address and resets the end address with start+size-1 accordingly, then checks whether it's contained. Here the end address may overflow the integer, although resource_contains() still returns true because the function validates only start and end address. So this ends up with returning an invalid resource (start > end). There was already an attempt to cover such a problem in the commit 47ea91b4 ("Resource: fix wrong resource window calculation"), but this case is an overseen one. This patch adds the validity check of the newly calculated resource for avoiding the integer overflow problem. Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1086739 Link: http://lkml.kernel.org/r/s5hpo37d5l8.wl-tiwai@suse.de Fixes: 23c570a6 ("resource: ability to resize an allocated resource") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reported-by:
Michael Henders <hendersm@shaw.ca> Tested-by:
-
Andrew Morton authored
commit 9ad553ab upstream. One use of the reiserfs_warning() macro in journal_init_dev() is missing a parameter, causing the following warning: REISERFS warning (device loop0): journal_init_dev: Cannot open '%s': %i journal_init_dev: This also causes a WARN_ONCE() warning in the vsprintf code, and then a panic if panic_on_warn is set. Please remove unsupported %/ in format string WARNING: CPU: 1 PID: 4480 at lib/vsprintf.c:2138 format_decode+0x77f/0x830 lib/vsprintf.c:2138 Kernel panic - not syncing: panic_on_warn set ... Just add another string argument to the macro invocation. Addresses https://syzkaller.appspot.com/bug?id=0627d4551fdc39bf1ef5d82cd9eef587047f7718 Link: http://lkml.kernel.org/r/d678ebe1-6f54-8090-df4c-b9affad62293@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by: <syzbot+6bd77b88c1977c03f584@syzkaller.appspotmail.com> Tested-by:
Jeff Mahoney <jeffm@suse.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kees Cook authored
commit 2cfe0d30 upstream. The original intent for always adding the anonymous struct in task_struct was to make sure we had compiler coverage. However, this caused pathological padding of 40 bytes at the start of task_struct. Instead, move the anonymous struct to being only used when struct layout randomization is enabled. Link: http://lkml.kernel.org/r/20180327213609.GA2964@beast Fixes: 29e48ce8 ("task_struct: Allow randomized") Signed-off-by:
Kees Cook <keescook@chromium.org> Reported-by:
Peter Zijlstra <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jérôme Glisse authored
commit c719547f upstream. The private field of mm_walk struct point to an hmm_vma_walk struct and not to the hmm_range struct desired. Fix to get proper struct pointer. Link: http://lkml.kernel.org/r/20180323005527.758-6-jglisse@redhat.comSigned-off-by:
Jérôme Glisse <jglisse@redhat.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jérôme Glisse authored
commit b28b08de upstream. The #if/#else/#endif for IS_ENABLED(CONFIG_HMM) were wrong. Because of this after multiple include there was multiple definition of both hmm_mm_init() and hmm_mm_destroy() leading to build failure if HMM was enabled (CONFIG_HMM set). Link: http://lkml.kernel.org/r/20180323005527.758-3-jglisse@redhat.comSigned-off-by:
Balbir Singh <bsingharora@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Claudio Imbrenda authored
commit a38c015f upstream. When using KSM with use_zero_pages, we replace anonymous pages containing only zeroes with actual zero pages, which are not anonymous. We need to do proper accounting of the mm counters, otherwise we will get wrong values in /proc and a BUG message in dmesg when tearing down the mm. Link: http://lkml.kernel.org/r/1522931274-15552-1-git-send-email-imbrenda@linux.vnet.ibm.com Fixes: e86c59b1 ("mm/ksm: improve deduplication of zero pages with colouring") Signed-off-by:
Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by:
-
Richard Weinberger authored
commit b5094b7f upstream. While UBI and UBIFS seem to work at first sight with MLC NAND, you will most likely lose all your data upon a power-cut or due to read/write disturb. In order to protect users from bad surprises, refuse to attach to MLC NAND. Cc: stable@vger.kernel.org Signed-off-by:
Richard Weinberger <richard@nod.at> Acked-by:
Boris Brezillon <boris.brezillon@bootlin.com> Acked-by:
Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by:
-
Romain Izard authored
commit 78a8dfba upstream. When opening a device with write access, ubiblock_open returns an error code. Currently, this error code is -EPERM, but this is not the right value. The open function for other block devices returns -EROFS when opening read-only devices with FMODE_WRITE set. When used with dm-verity, the veritysetup userspace tool is expecting EROFS, and refuses to use the ubiblock device. Use -EROFS for ubiblock as well. As a result, veritysetup accepts the ubiblock device as valid. Cc: stable@vger.kernel.org Fixes: 9d54c8a3 (UBI: R/O block driver on top of UBI volumes) Signed-off-by:
Romain Izard <romain.izard.pro@gmail.com> Signed-off-by:
-
Richard Weinberger authored
commit 29b7a6fa upstream. At this point UBI volumes have already been free()'ed and fastmap can no longer access these data structures. Reported-by:
Martin Townsend <mtownsend1973@gmail.com> Fixes: 74cdaf24 ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system") Cc: stable@vger.kernel.org Signed-off-by:
-
Richard Weinberger authored
commit aac17948 upstream. If ubifs_wbuf_sync() fails we must not write a master node with the dirty marker cleared. Otherwise it is possible that in case of an IO error while syncing we mark the filesystem as clean and UBIFS refuses to recover upon next mount. Cc: <stable@vger.kernel.org> Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
-
George Cherian authored
commit 3d41386d upstream. With commit e948bc8f (cpufreq: Cap the default transition delay value to 10 ms) the cpufreq was not honouring the delay passed via ACPI (PCCT). Due to which on ARM based platforms using CPPC the cpufreq governor tries to change the frequency of CPUs faster than expected. This leads to continuous error messages like the following. " ACPI CPPC: PCC check channel failed. Status=0 " Earlier (without above commit) the default transition delay was taken form the value passed from PCCT. Use the same value provided by PCCT to set the transition_delay_us. Fixes: e948bc8f (cpufreq: Cap the default transition delay value to 10 ms) Signed-off-by:
George Cherian <george.cherian@cavium.com> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Tejun Heo authored
commit 28b0f8a6 upstream. A tty is hung up by __tty_hangup() setting file->f_op to hung_up_tty_fops, which is skipped on ttys whose write operation isn't tty_write(). This means that, for example, /dev/console whose write op is redirected_tty_write() is never actually marked hung up. Because n_tty_read() uses the hung up status to decide whether to abort the waiting readers, the lack of hung-up marking can lead to the following scenario. 1. A session contains two processes. The leader and its child. The child ignores SIGHUP. 2. The leader exits and starts disassociating from the controlling terminal (/dev/console). 3. __tty_hangup() skips setting f_op to hung_up_tty_fops. 4. SIGHUP is delivered and ignored. 5. tty_ldisc_hangup() is invoked. It wakes up the waits which should clear the read lockers of tty->ldisc_sem. 6. The reader wakes up but because tty_hung_up_p() is false, it doesn't abort and goes back to sleep while read-holding tty->ldisc_sem. 7. The leader progresses to tty_ldisc_lock() in tty_ldisc_hangup() and is now stuck in D sleep indefinitely waiting for tty->ldisc_sem. The following is Alan's explanation on why some ttys aren't hung up. http://lkml.kernel.org/r/20171101170908.6ad08580@alans-desktop 1. It broke the serial consoles because they would hang up and close down the hardware. With tty_port that *should* be fixable properly for any cases remaining. 2. The console layer was (and still is) completely broken and doens't refcount properly. So if you turn on console hangups it breaks (as indeed does freeing consoles and half a dozen other things). As neither can be fixed quickly, this patch works around the problem by introducing a new flag, TTY_HUPPING, which is used solely to tell n_tty_read() that hang-up is in progress for the console and the readers should be aborted regardless of the hung-up status of the device. The following is a sample hung task warning caused by this issue. INFO: task agetty:2662 blocked for more than 120 seconds. Not tainted 4.11.3-dbg-tty-lockup-02478-gfd6c7ee-dirty #28 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 0 2662 1 0x00000086 Call Trace: __schedule+0x267/0x890 schedule+0x36/0x80 schedule_timeout+0x23c/0x2e0 ldsem_down_write+0xce/0x1f6 tty_ldisc_lock+0x16/0x30 tty_ldisc_hangup+0xb3/0x1b0 __tty_hangup+0x300/0x410 disassociate_ctty+0x6c/0x290 do_exit+0x7ef/0xb00 do_group_exit+0x3f/0xa0 get_signal+0x1b3/0x5d0 do_signal+0x28/0x660 exit_to_usermode_loop+0x46/0x86 do_syscall_64+0x9c/0xb0 entry_SYSCALL64_slow_path+0x25/0x25 The following is the repro. Run "$PROG /dev/console". The parent process hangs in D state. #include <sys/types.h> #include <sys/stat.h> #include <sys/wait.h> #include <sys/ioctl.h> #include <fcntl.h> #include <unistd.h> #include <stdio.h> #include <stdlib.h> #include <errno.h> #include <signal.h> #include <time.h> #include <termios.h> int main(int argc, char **argv) { struct sigaction sact = { .sa_handler = SIG_IGN }; struct timespec ts1s = { .tv_sec = 1 }; pid_t pid; int fd; if (argc < 2) { fprintf(stderr, "test-hung-tty /dev/$TTY\n"); return 1; } /* fork a child to ensure that it isn't already the session leader */ pid = fork(); if (pid < 0) { perror("fork"); return 1; } if (pid > 0) { /* top parent, wait for everyone */ while (waitpid(-1, NULL, 0) >= 0) ; if (errno != ECHILD) perror("waitpid"); return 0; } /* new session, start a new session and set the controlling tty */ if (setsid() < 0) { perror("setsid"); return 1; } fd = open(argv[1], O_RDWR); if (fd < 0) { perror("open"); return 1; } if (ioctl(fd, TIOCSCTTY, 1) < 0) { perror("ioctl"); return 1; } /* fork a child, sleep a bit and exit */ pid = fork(); if (pid < 0) { perror("fork"); return 1; } if (pid > 0) { nanosleep(&ts1s, NULL); printf("Session leader exiting\n"); exit(0); } /* * The child ignores SIGHUP and keeps reading from the controlling * tty. Because SIGHUP is ignored, the child doesn't get killed on * parent exit and the bug in n_tty makes the read(2) block the * parent's control terminal hangup attempt. The parent ends up in * D sleep until the child is explicitly killed. */ sigaction(SIGHUP, &sact, NULL); printf("Child reading tty\n"); while (1) { char buf[1024]; if (read(fd, buf, sizeof(buf)) < 0) { perror("read"); return 1; } } return 0; } Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: stable@vger.kernel.org Signed-off-by:
-
- 19 Apr, 2018 9 commits
-
-
Greg Kroah-Hartman authored
-
J. Bruce Fields authored
commit 880a3a53 upstream. We're neglecting to clear the umask after it's set, which can cause a later unrelated rpc to (incorrectly) use the same umask if it happens to be processed by the same thread. There's a more subtle problem here too: An NFSv4 compound request is decoded all in one pass before any operations are executed. Currently we're setting current->fs->umask at the time we decode the compound. In theory a single compound could contain multiple creates each setting a umask. In that case we'd end up using whichever umask was passed in the *last* operation as the umask for all the creates, whether that was correct or not. So, we should just be saving the umask at decode time and waiting to set it until we actually process the corresponding operation. In practice it's unlikely any client would do multiple creates in a single compound. And even if it did they'd likely be from the same process (hence carry the same umask). So this is a little academic, but we should get it right anyway. Fixes: 47057abd (nfsd: add support for the umask attribute) Cc: stable@vger.kernel.org Reported-by:
Lucash Stach <l.stach@pengutronix.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Mike Kravetz authored
commit 5df63c2a upstream. This is a fix for a regression in 32 bit kernels caused by an invalid check for pgoff overflow in hugetlbfs mmap setup. The check incorrectly specified that the size of a loff_t was the same as the size of a long. The regression prevents mapping hugetlbfs files at offsets greater than 4GB on 32 bit kernels. On 32 bit kernels conversion from a page based unsigned long can not overflow a loff_t byte offset. Therefore, skip this check if sizeof(unsigned long) != sizeof(loff_t). Link: http://lkml.kernel.org/r/20180330145402.5053-1-mike.kravetz@oracle.com Fixes: 63489f8e ("hugetlbfs: check for pgoff value overflow") Reported-by:
Dan Rue <dan.rue@linaro.org> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Tested-by:
Anders Roxell <anders.roxell@linaro.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Yisheng Xie <xieyisheng1@huawei.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Nic Losby <blurbdust@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Simon Gaiser authored
commit 2a22ee6c upstream. Commit fd8aa909 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") made a subtle change to the semantic of xenbus_dev_request_and_reply() and xenbus_transaction_end(). Before on an error response to XS_TRANSACTION_END xenbus_dev_request_and_reply() would not decrement the active transaction counter. But xenbus_transaction_end() has always counted the transaction as finished regardless of the response. The new behavior is that xenbus_dev_request_and_reply() and xenbus_transaction_end() will always count the transaction as finished regardless the response code (handled in xs_request_exit()). But xenbus_dev_frontend tries to end a transaction on closing of the device if the XS_TRANSACTION_END failed before. Trying to close the transaction twice corrupts the reference count. So fix this by also considering a transaction closed if we have sent XS_TRANSACTION_END once regardless of the return code. Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd8aa909 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Signed-off-by:
Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Amir Goldstein authored
commit 3ec9b3fa upstream. As of now if we encounter an opaque dir while looking for a dentry, we set d->last=true. This means that there is no need to look further in any of the lower layers. This works fine as long as there are no redirets or relative redircts. But what if there is an absolute redirect on the children dentry of opaque directory. We still need to continue to look into next lower layer. This patch fixes it. Here is an example to demonstrate the issue. Say you have following setup. upper: /redirect (redirect=/a/b/c) lower1: /a/[b]/c ([b] is opaque) (c has absolute redirect=/a/b/d/) lower0: /a/b/d/foo Now "redirect" dir should merge with lower1:/a/b/c/ and lower0:/a/b/d. Note, despite the fact lower1:/a/[b] is opaque, we need to continue to look into lower0 because children c has an absolute redirect. Following is a reproducer. Watch me make foo disappear: $ mkdir lower middle upper work work2 merged $ mkdir lower/origin $ touch lower/origin/foo $ mount -t overlay none merged/ \ -olowerdir=lower,upperdir=middle,workdir=work2 $ mkdir merged/pure $ mv merged/origin merged/pure/redirect $ umount merged $ mount -t overlay none merged/ \ -olowerdir=middle:lower,upperdir=upper,workdir=work $ mv merged/pure/redirect merged/redirect Now you see foo inside a twice redirected merged dir: $ ls merged/redirect foo $ umount merged $ mount -t overlay none merged/ \ -olowerdir=middle:lower,upperdir=upper,workdir=work After mount cycle you don't see foo inside the same dir: $ ls merged/redirect During middle layer lookup, the opaqueness of middle/pure is left in the lookup state and then middle/pure/redirect is wrongly treated as opaque. Fixes: 02b69b28 ("ovl: lookup redirects") Cc: <stable@vger.kernel.org> #v4.10 Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Ming Lei authored
commit bffa9909 upstream. From commit 4b855ad3 ("blk-mq: Create hctx for each present CPU), blk-mq doesn't remap queue after CPU topo is changed, that said when some of these offline CPUs become online, they are still mapped to hctx 0, then hctx 0 may become the bottleneck of IO dispatch and completion. This patch sets up the mapping from the beginning, and aligns to queue mapping for PCI device (blk_mq_pci_map_queues()). Cc: Stefan Haberland <sth@linux.vnet.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: stable@vger.kernel.org Fixes: 4b855ad3 ("blk-mq: Create hctx for each present CPU) Tested-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Yury Norov authored
commit 8351760f upstream. syzbot is catching stalls at __bitmap_parselist() (https://syzkaller.appspot.com/bug?id=ad7e0351fbc90535558514a71cd3edc11681997a). The trigger is unsigned long v = 0; bitmap_parselist("7:,", &v, BITS_PER_LONG); which results in hitting infinite loop at while (a <= b) { off = min(b - a + 1, used_size); bitmap_set(maskp, a, off); a += group_size; } due to used_size == group_size == 0. Link: http://lkml.kernel.org/r/20180404162647.15763-1-ynorov@caviumnetworks.com Fixes: 0a5ce083 ("lib/bitmap.c: make bitmap_parselist() thread-safe and much faster") Signed-off-by:
Yury Norov <ynorov@caviumnetworks.com> Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+6887cbb011c8054e8a3d@syzkaller.appspotmail.com> Cc: Noam Camus <noamca@mellanox.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Yunlong Song authored
commit b94929d9 upstream. Commit 7a20b8a6 ("f2fs: allocate node and hot data in the beginning of partition") introduces another mount option, heap, to reset it back. But it does not do anything for heap mode, so fix it. Cc: stable@vger.kernel.org Signed-off-by:
Yunlong Song <yunlong.song@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Eric Biggers authored
commit f3aefb6a upstream. make_checksum_hmac_md5() is allocating an HMAC transform and doing crypto API calls in the following order: crypto_ahash_init() crypto_ahash_setkey() crypto_ahash_digest() This is wrong because it makes no sense to init() the request before a key has been set, given that the initial state depends on the key. And digest() is short for init() + update() + final(), so in this case there's no need to explicitly call init() at all. Before commit 9fa68f62 ("crypto: hash - prevent using keyed hashes without setting key") the extra init() had no real effect, at least for the software HMAC implementation. (There are also hardware drivers that implement HMAC-MD5, and it's not immediately obvious how gracefully they handle init() before setkey().) But now the crypto API detects this incorrect initialization and returns -ENOKEY. This is breaking NFS mounts in some cases. Fix it by removing the incorrect call to crypto_ahash_init(). Reported-by:
Michael Young <m.a.young@durham.ac.uk> Fixes: 9fa68f62 ("crypto: hash - prevent using keyed hashes without setting key") Fixes: fffdaef2 ("gss_krb5: Add support for rc4-hmac encryption") Cc: stable@vger.kernel.org Signed-off-by:
-
