Skip to content

L
linux
Switch branch/tag
  1. 10 Feb, 2014 1 commit
  3. 09 Feb, 2014 2 commits
    • David S. Miller's avatar
      Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless · 872c7e6f
      David S. Miller authored 
      John W. Linville says:

====================
Please pull this batch of fixes intended for the 3.14 stream!

For the mac80211 bits, Johannes says:

"This is just a collection of small fixes, the commit logs explain the
details. The only thing that isn't strictly a fix is the 5/10 MHz
enabling, I had forgotten this and there's little point in waiting
longer. The patch simply removes the force-disable code that I put in
when there was a problem with the userspace API (that has long been
fixed.)"

For the iwlwifi bits, Emmanuel says:

"I have an important fix that disables A band in case the driver thought
it was enabled, and the firmware disagreed. We ended up making the
firmware unhappy. I also fix the station table in AP mode and fix the
scan while we have BT working.
Johannes removes a static variable that could potentially lead to to
issues on multi-device setups and disables scheduled scan to avoid
issues with old versions of wpa_supplicant.
A small fix from David on scan and a few new device IDs for 7265."

On top of that...

Oleksij Rempel adds a USB ID to the ar5523 driver and changes the
default powersave setting for ath9k_htc to "off", due to observed
stability issues (based on an equivalent ath9k patch).

Stanislaw Gruszka similarly disables powersave for a couple of rt2x00
drivers.  He also fixes a couple of scheduling while atomic issues
in ath9k_htc.

Sujith Manoharan rounds-out the powersave disables with one for ath9k.
He also fixes a build prolem with ath9k on ARM and fixes an ath9k Tx
power calculation.

Finally, Andrea Merello fixes a couple of lingering DMA mapping
problems in the rtl8180 driver.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      872c7e6f
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · f41f0319
      David S. Miller authored 
      Pablo Neira Ayuso says:

====================
Netfilter/nftables/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes, mostly nftables
fixes, most relevantly they are:

* Fix a crash in the h323 conntrack NAT helper due to expectation list
  corruption, from Alexey Dobriyan.

* A couple of RCU race fixes for conntrack, one manifests by hitting BUG_ON
  in nf_nat_setup_info() and the destroy path, patches from Andrey Vagin and
  me.

* Dump direction attribute in nft_ct only if it is set, from Arturo
  Borrero.

* Fix IPVS bug in its own connection tracking system that may lead to
  copying only 4 bytes of the IPv6 address when initializing the
  ip_vs_conn object, from Michal Kubecek.

* Fix -EBUSY errors in nftables when deleting the rules, chain and tables
  in a row due mixture of asynchronous and synchronous object releasing,
  from me.

* Three fixes for the nf_tables set infrastructure when using intervals and
  mappings, from me.

* Four patches to fixing the nf_tables log, reject and ct expressions from
  the new inet table, from Patrick McHardy.

* Fix memory overrun in the map that is used to dynamically allocate names
  from anonymous sets, also from Patrick.

* Fix a potential oops if you dump a set with NFPROTO_UNSPEC and a table
  name, from Patrick McHardy.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f41f0319
  5. 07 Feb, 2014 24 commits
  7. 06 Feb, 2014 13 commits
    • andrea.merello's avatar
      rtl8180: Add error check for pci_map_single return value in TX path · 348f7d4a
      andrea.merello authored 
      Orignal code will not detect a DMA mapping failure, causing the HW
to attempt a DMA from an invalid address.

This patch add the error check and eventually simply drops the TX
packet if we can't map it for DMA.
Signed-off-by: default avatarandrea merello <andrea.merello@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      348f7d4a
    • andrea.merello's avatar
      rtl8180: Add error check for pci_map_single return value in RX path · 2b4db05e
      andrea.merello authored 
      In original code the old RX DMA buffer is unmapped and processed and at the end
of the isr a new buffer is mapped with pci_map_single and attached to the RX
descriptor.

If pci_map_single fails then the RX descriptor remains with no valid DMA buffer
attached.
In this condition the DMA will target where it shouldn't with obvious evil
consequences.

Simply avoiding re-arming the descriptor will prevent buggy DMA but it will
result soon in RX stuck.

This patch move the DMA mapping of the new buffer at the beginning of the ISR
(and it adds error check for pci_map_single success/fail).

If the DMA mapping fails then we do not unmap the old buffer and we re-arm the
descriptor without processing it, with the old DMA buffer still attached.

In this way we lose the currently RX-ed packet, but whenever next calls to
pci_map_single will succeed again,then the RX process will go on without stuck.
Signed-off-by: default avatarandrea merello <andrea.merello@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      2b4db05e
    • John W. Linville's avatar
      Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 · 199160bb
      John W. Linville authored
      199160bb
    • Pablo Neira Ayuso's avatar
      netfilter: nf_tables: fix racy rule deletion · 0165d932
      Pablo Neira Ayuso authored 
      We may lost race if we flush the rule-set (which happens asynchronously
via call_rcu) and we try to remove the table (that userspace assumes
to be empty).

Fix this by recovering synchronous rule and chain deletion. This was
introduced time ago before we had no batch support, and synchronous
rule deletion performance was not good. Now that we have the batch
support, we can just postpone the purge of old rule in a second step
in the commit phase. All object deletions are synchronous after this
patch.

As a side effect, we save memory as we don't need rcu_head per rule
anymore.

Cc: Patrick McHardy <kaber@trash.net>
Reported-by: default avatarArturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      0165d932
    • Patrick McHardy's avatar
      netfilter: nf_tables: fix log/queue expressions for NFPROTO_INET · b8ecbee6
      Patrick McHardy authored 
      The log and queue expressions both store the family during ->init() and
use it to deliver packets. This is wrong when used in NFPROTO_INET since
they should both deliver to the actual AF of the packet, not the dummy
NFPROTO_INET.

Use the family from the hook ops to fix this.
Signed-off-by: default avatarPatrick McHardy <kaber@trash.net>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      b8ecbee6
    • Johannes Berg's avatar
      mac80211: fix virtual monitor interface iteration · fab57a6c
      Johannes Berg authored 
      During channel context assignment, the interface should
be found by interface iteration, so we need to assign the
pointer before the channel context.
Reported-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      fab57a6c
    • Johannes Berg's avatar
      mac80211: fix fragmentation code, particularly for encryption · 338f977f
      Johannes Berg authored 
      The "new" fragmentation code (since my rewrite almost 5 years ago)
erroneously sets skb->len rather than using skb_trim() to adjust
the length of the first fragment after copying out all the others.
This leaves the skb tail pointer pointing to after where the data
originally ended, and thus causes the encryption MIC to be written
at that point, rather than where it belongs: immediately after the
data.

The impact of this is that if software encryption is done, then
 a) encryption doesn't work for the first fragment, the connection
    becomes unusable as the first fragment will never be properly
    verified at the receiver, the MIC is practically guaranteed to
    be wrong
 b) we leak up to 8 bytes of plaintext (!) of the packet out into
    the air

This is only mitigated by the fact that many devices are capable
of doing encryption in hardware, in which case this can't happen
as the tail pointer is irrelevant in that case. Additionally,
fragmentation is not used very frequently and would normally have
to be configured manually.

Fix this by using skb_trim() properly.

Cc: stable@vger.kernel.org
Fixes: 2de8e0d9 ("mac80211: rewrite fragmentation")
Reported-by: default avatarJouni Malinen <j@w1.fi>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      338f977f
    • Sujith Manoharan's avatar
      mac80211: Fix IBSS disconnect · d4c80d9d
      Sujith Manoharan authored 
      Currently, when a station leaves an IBSS network, the
corresponding BSS is not dropped from cfg80211 if there are
other active stations in the network. But, the small
window that is present when trying to determine a station's
status based on IEEE80211_IBSS_MERGE_INTERVAL introduces
a race.

Instead of trying to keep the BSS, always remove it when
leaving an IBSS network. There is not much benefit to retain
the BSS entry since it will be added with a subsequent join
operation.

This fixes an issue where a dangling BSS entry causes ath9k
to wait for a beacon indefinitely.

Cc: <stable@vger.kernel.org>
Reported-by: default avatarSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: default avatarSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      d4c80d9d
    • Emmanuel Grumbach's avatar
      mac80211: release the channel in error path in start_ap · 0297ea17
      Emmanuel Grumbach authored 
      When the driver cannot start the AP or when the assignement
of the beacon goes wrong, we need to unassign the vif.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      0297ea17
    • Johannes Berg's avatar
      cfg80211: send scan results from work queue · f9d15d16
      Johannes Berg authored 
      Due to the previous commit, when a scan finishes, it is in theory
possible to hit the following sequence:
 1. interface starts being removed
 2. scan is cancelled by driver and cfg80211 is notified
 3. scan done work is scheduled
 4. interface is removed completely, rdev->scan_req is freed,
    event sent to userspace but scan done work remains pending
 5. new scan is requested on another virtual interface
 6. scan done work runs, freeing the still-running scan

To fix this situation, hang on to the scan done message and block
new scans while that is the case, and only send the message from
the work function, regardless of whether the scan_req is already
freed from interface removal. This makes step 5 above impossible
and changes step 6 to be
 5. scan done work runs, sending the scan done message

As this can't work for wext, so we send the message immediately,
but this shouldn't be an issue since we still return -EBUSY.
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      f9d15d16
    • Johannes Berg's avatar
      cfg80211: fix scan done race · a617302c
      Johannes Berg authored 
      When an interface/wdev is removed, any ongoing scan should be
cancelled by the driver. This will make it call cfg80211, which
only queues a work struct. If interface/wdev removal is quick
enough, this can leave the scan request pending and processed
only after the interface is gone, causing a use-after-free.

Fix this by making sure the scan request is not pending after
the interface is destroyed. We can't flush or cancel the work
item due to locking concerns, but when it'll run it shouldn't
find anything to do. This leaves a potential issue, if a new
scan gets requested before the work runs, it prematurely stops
the running scan, potentially causing another crash. I'll fix
that in the next patch.

This was particularly observed with P2P_DEVICE wdevs, likely
because freeing them is quicker than freeing netdevs.
Reported-by: default avatarAndrei Otcheretianski <andrei.otcheretianski@intel.com>
Fixes: 4a58e7c3 ("cfg80211: don't "leak" uncompleted scans")
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      a617302c
    • Emmanuel Grumbach's avatar
      mac80211: avoid deadlock revealed by lockdep · 8ffcc704
      Emmanuel Grumbach authored 
      sdata->u.ap.request_smps_work can’t be flushed synchronously
under wdev_lock(wdev) since ieee80211_request_smps_ap_work
itself locks the same lock.
While at it, reset the driver_smps_mode when the ap is
stopped to its default: OFF.

This solves:

======================================================
[ INFO: possible circular locking dependency detected ]
3.12.0-ipeer+ #2 Tainted: G           O
-------------------------------------------------------
rmmod/2867 is trying to acquire lock:
  ((&sdata->u.ap.request_smps_work)){+.+...}, at: [<c105b8d0>] flush_work+0x0/0x90

but task is already holding lock:
  (&wdev->mtx){+.+.+.}, at: [<f9b32626>] cfg80211_stop_ap+0x26/0x230 [cfg80211]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&wdev->mtx){+.+.+.}:
        [<c10aefa9>] lock_acquire+0x79/0xe0
        [<c1607a1a>] mutex_lock_nested+0x4a/0x360
        [<fb06288b>] ieee80211_request_smps_ap_work+0x2b/0x50 [mac80211]
        [<c105cdd8>] process_one_work+0x198/0x450
        [<c105d469>] worker_thread+0xf9/0x320
        [<c10669ff>] kthread+0x9f/0xb0
        [<c1613397>] ret_from_kernel_thread+0x1b/0x28

-> #0 ((&sdata->u.ap.request_smps_work)){+.+...}:
        [<c10ae9df>] __lock_acquire+0x183f/0x1910
        [<c10aefa9>] lock_acquire+0x79/0xe0
        [<c105b917>] flush_work+0x47/0x90
        [<c105d867>] __cancel_work_timer+0x67/0xe0
        [<c105d90f>] cancel_work_sync+0xf/0x20
        [<fb0765cc>] ieee80211_stop_ap+0x8c/0x340 [mac80211]
        [<f9b3268c>] cfg80211_stop_ap+0x8c/0x230 [cfg80211]
        [<f9b0d8f9>] cfg80211_leave+0x79/0x100 [cfg80211]
        [<f9b0da72>] cfg80211_netdev_notifier_call+0xf2/0x4f0 [cfg80211]
        [<c160f2c9>] notifier_call_chain+0x59/0x130
        [<c106c6de>] __raw_notifier_call_chain+0x1e/0x30
        [<c106c70f>] raw_notifier_call_chain+0x1f/0x30
        [<c14f8213>] call_netdevice_notifiers_info+0x33/0x70
        [<c14f8263>] call_netdevice_notifiers+0x13/0x20
        [<c14f82a4>] __dev_close_many+0x34/0xb0
        [<c14f83fe>] dev_close_many+0x6e/0xc0
        [<c14f9c77>] rollback_registered_many+0xa7/0x1f0
        [<c14f9dd4>] unregister_netdevice_many+0x14/0x60
        [<fb06f4d9>] ieee80211_remove_interfaces+0xe9/0x170 [mac80211]
        [<fb055116>] ieee80211_unregister_hw+0x56/0x110 [mac80211]
        [<fa3e9396>] iwl_op_mode_mvm_stop+0x26/0xe0 [iwlmvm]
        [<f9b9d8ca>] _iwl_op_mode_stop+0x3a/0x70 [iwlwifi]
        [<f9b9d96f>] iwl_opmode_deregister+0x6f/0x90 [iwlwifi]
        [<fa405179>] __exit_compat+0xd/0x19 [iwlmvm]
        [<c10b8bf9>] SyS_delete_module+0x179/0x2b0
        [<c1613421>] sysenter_do_call+0x12/0x32

Fixes: 687da132 ("mac80211: implement SMPS for AP")
Cc: <stable@vger.kernel.org> [3.13]
Reported-by: default avatarIlan Peer <ilan.peer@intel.com>
Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      8ffcc704
    • Johannes Berg's avatar
      cfg80211: re-enable 5/10 MHz support · 5a6aa705
      Johannes Berg authored 
      Unfortunately I forgot this during the merge window, but the
patch seems small enough to go in as a fix. The userspace API
bug that was the reason for disabling it has long been fixed.
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      5a6aa705
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7