- 31 Jan, 2020 7 commits
-
-
Boris Brezillon authored
Now that bridges can expose the bus format/flags they expect, we can use those instead of the relying on the display_info provided by the connector (which is only valid if the encoder is directly connected to bridge element driving the panel/display). We also explicitly expose the bus formats supported by our encoder by filling encoder->output_bus_caps with proper info. v10: * Add changelog to the commit message * Use kmalloc() instead of kcalloc() * Add a dev_warn() when unsupported flags are requested v8 -> v9: * No changes v7: * Add an imx_pd_format_supported() helper (suggested by Philipp) * Simplify imx_pd_bridge_atomic_get_output_bus_fmts() (suggested by Philipp) * Simplify imx_pd_bridge_atomic_get_input_bus_fmts() * Explicitly set the duplicate/destro_state() and reset() hooks v4 -> v6: * Patch was not part of the series v3 (all suggested by Philipp): * Adjust to match core changes * Propagate output format to input format * Pick a default value when output_fmt = _FIXED * Add missing BGR888 and GBR888 fmts to imx_pd_bus_fmts[] v2: * Adjust things to match the new bus-format negotiation infra Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-8-boris.brezillon@collabora.com
-
Boris Brezillon authored
drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by:Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Tested-by:
Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
-
Boris Brezillon authored
So that bridge drivers have a way to check/reject an atomic operation. The drm_atomic_bridge_chain_check() (which is just a wrapper around the ->atomic_check() hook) is called in place of drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented, the core falls back on ->mode_fixup(), so the behavior should stay the same for existing bridge drivers). v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * Fix a NULL pointer dereference v5 -> v6: * No changes v4: * Add R-bs v3: * No changes v2: * Clarify the fact that ->atomic_check() is replacing ->mode_fixup() Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Boris Brezillon authored
This way the drm_bridge_funcs interface is consistent with the rest of the subsystem. The drivers implementing those hooks are patched too. v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * Adjust things to the bridge_state changes v6: * Also fixed rcar-du/rcar_lvds.c same as analogix/analogix_dp_core.c v5: * No changes v4: * Rename func params into old_bridge_state * Add Laurent's Rb v3: * Old state clarification moved to a separate patch v2: * Pass the old bridge state Signed-off-by:
-
Boris Brezillon authored
This is needed to pass a bridge state to all atomic hooks, if we don't do that, the core can't duplicate/create bridge states. v10: * Add changelog to the commit message v9: * Add Neil's R-b * Move earlier in the series v8: * No changes v7: * New patch Signed-off-by:
-
Boris Brezillon authored
This is needed to pass a bridge state to all atomic hooks, if we don't do that, the core can't duplicate/create bridge states. v10: * Add changelog to the commit message v9: * Add Neil's R-b * Move earlier in the series v8: * No changes v7: * New patch Signed-off-by:
-
Boris Brezillon authored
One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. v10: * Add changelog to the commit message v9: * Clarify the fact that the bridge->atomic_reset() and {connector,plane,crtc,...}->reset() semantics are different * Move the drm_atomic_private_obj_init() call back to drm_bridge_attach() * Check the presence of ->atomic_duplicate_state instead of ->atomic_reset in drm_atomic_add_encoder_bridges() * Fix copy&paste errors in the atomic bridge state helpers doc * Add A-b/R-b tags v8: * Move bridge state helpers out of the CONFIG_DEBUGFS section v7: * Move helpers, struct-defs, ... to atomic helper files to avoid the drm -> drm_kms_helper -> drm circular dep * Stop providing default implementation for atomic state reset, duplicate and destroy hooks (has to do with the helper/core split) * Drop all R-b/T-b as helpers have now be moved to other places v6: * Made helpers private, removed doc and moved them to satisfy dependencies * Renamed helpers to _default_ v5: * Re-introduced the helpers from v4 v4: * Fix the doc * Kill default helpers (inlined) * Fix drm_atomic_get_bridge_state() to check for an ERR_PTR() * Add Neil's R-b v3: * No changes v2: * Use drm_for_each_bridge_in_chain() * Rename helpers to be more consistent with the rest of the DRM API * Improve/fix the doc Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com
-
- 30 Jan, 2020 19 commits
-
-
Michael Srba authored
Add driver for Samsung AMS452EF01 AMOLED panel, which makes use of their S6E88A0 controller. Signed-off-by:
Michael Srba <Michael.Srba@seznam.cz> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> [fixed checkpatch warnings, added changelog] Link: https://patchwork.freedesktop.org/patch/msgid/20200130203555.316-2-michael.srba@seznam.cz
-
Michael Srba authored
This patch adds dts bindings for Samsung AMS452EF01 AMOLED panel, which makes use of their S6E88A0 controller. Signed-off-by:
-
Marian-Cristian Rotariu authored
EDT ET043080DH6-GP is a 4.3" WQVGA 480x272 RGB LCD panel used on the iWave Generic SODIMM Development Platform. Changes in v2: -added mandatory .connector_type field -changed the .bus_format MEDIA_BUS_FMT_RGB666_1X18 Signed-off-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by:
-
Marian-Cristian Rotariu authored
Document the Emerging Display Technology Corp. (EDT) ETM043080DH6-GP display, which is a 480x272 4.3" TFT display with capacitive touchscreen. Changes in v2: -modify proper bindings file Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. This would apply to xen, but xen has its own vblank logic. To avoid interfering with the atomic helpers, disable automatic vblank events explicitly. v5: * update comment v4: * separate commit from core vblank changes Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-16-tzimmermann@suse.de
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
As udl does not initialize vblanking, atomic helpers initialize the value of struct drm_crtc_state.no_vblank to be true. No need to set it from within the driver. Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
As ast does not initialize vblanking, atomic helpers initialize the value of struct drm_crtc_state.no_vblank to be true. No need to set it from within the driver. Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
At the end of a commit, atomic helpers can generate a fake VBLANK event automatically. Originally implemented for writeback connectors, the functionality can be used by any driver and/or hardware without proper VBLANK interrupt. The patch updates the documentation to make this behaviour official: settings struct drm_crtc_state.no_vblank to true enables automatic generation of fake VBLANK events. The new interface drm_dev_has_vblank() returns true if vblanking has been initialized for a device, or false otherwise. Atomic helpers use this function when initializing no_vblank in the CRTC state in drm_atomic_helper_check_modeset(). If vblanking has been initialized for a device, no_blank is disabled. Otherwise it's enabled. Hence, atomic helpers will automatically send out fake VBLANK events with any driver that did not initialize vblanking. v5: * more precise documentation and commit message v4: * replace drm_crtc_has_vblank() with drm_dev_has_vblank() * add drm_dev_has_vblank() in this patch * move driver changes into separate patches v3: * squash all related changes patches into this patch Signed-off-by:
-
- 29 Jan, 2020 1 commit
-
-
Daniel Vetter authored
vmwgfx stopped using them. With the drm device model that we've slowly evolved over the past few years master status essentially controls access to display resources, and nothing else. Since that's a pure access permission check drivers should have no need at all to track additional state on a per file basis. Aside: For cleanup and restoring kernel-internal clients the grand plan is to move everyone over to drm_client and drm_master_internal_acquire/release, like the generic fbdev code already does. That should get rid of most ->lastclose implementations, and I think also subsumes any processing vmwgfx does in master_set/drop. Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Cc: "Thomas Hellström (VMware)" <thomas_os@shipmail.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200127100203.1299322-1-daniel.vetter@ffwll.ch
-
- 28 Jan, 2020 7 commits
-
-
Daniel Vetter authored
Oops. Fixes: 9edbf1fa ("drm: Add API for capturing frame CRCs") Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821203835.18314-1-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Reviewed-by:
Rodrigo Siqueira <rodrigosiqueira@gmail.com> Tested-by:
-
Daniel Vetter authored
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Daniel Vetter authored
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Reviewed-by:
-
Daniel Vetter authored
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Reviewed-by:
-
Daniel Vetter authored
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Acked-by:
-
Daniel Vetter authored
It's frankly a mess, and the confusion around plane_state->crtc/fb that I fixed up in this series is the least of the problems. Add a todo as a future note of how this could be done a lot better, and with a lot less driver confusion. Acked-by:
-
- 27 Jan, 2020 6 commits
-
-
Jyri Sarha authored
Add entry for tidss DRM driver. Version history: v2: no change v3: - Move tidss entry after omapdrm - Add "T: git git://anongit.freedesktop.org/drm/drm-misc" v4: no change v5: no change v6: no change v7: no change v8: - Add Reviewed-by: Benoit Parrot <bparrot@ti.com> v9: - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:Jyri Sarha <jsarha@ti.com> Reviewed-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/c22f7aa31af09cd4adcca6b1a6b0721d9429f055.1580129724.git.jsarha@ti.com
-
Jyri Sarha authored
This patch adds a new DRM driver for Texas Instruments DSS IPs used on Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is a major change to the older DSS IP versions, which are supported by the omapdrm driver. While on higher level the Keystone DSS resembles the older DSS versions, the registers are completely different and the internal pipelines differ a lot. DSS IP found on K2G is an "ultra-light" version, and has only a single plane and a single output. The K3 DSS IPs are found on AM65x and J721E SoCs. AM65x DSS has two video ports, one full video plane, and another "lite" plane without scaling support. J721E has 4 video ports, 2 video planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS) output. Version history: v2: - rebased on top of drm-next-2019-11-27 - sort all include lines in all files - remove all include <drm/drmP.h> - remove select "select VIDEOMODE_HELPERS" - call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no to call it in new modeset case as it is also called in vp_enable()) - change probe sequence and drm_device allocation (follow example in drm_drv.c) - use __maybe_unused instead of #ifdef for pm functions - remove "struct drm_fbdev_cma *fbdev;" from driver data - check panel connector type before connecting it v3: no change v4: no change v5: - remove fifo underflow irq handling, it is not an error and it should be used for debug purposes only - memory tuning, prefetch plane fifo up to high-threshold value to minimize possibility of underflows. v6: - Check CTM and gamma support from dispc_features when creating crtc - Implement CTM support for k2g and fix k3 CTM implementation - Remove gamma property persistence and always write color properties in a new modeset v7: - Fix checkpatch.pl --strict issues - Rebase on top of drm-misc-next-2020-01-10 v8: - Remove idle debug prints from dispc_init() - Add Reviewed-by: Benoit Parrot <bparrot@ti.com> v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid conflict exported omapfb function with same name - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Co-developed-by: -
Jyri Sarha authored
Add dt-schema yaml bindig for J721E DSS, J721E version TI Keystone Display SubSystem. Version history: v2: no change v3: - reg-names: "wp" -> "wb" - Add ports node - Add includes to dts example - reindent dts example v4: - Add descriptions to reg, clocks, and interrupts properties - Remove minItems when its value is the same as maxItems value v5: - itemize reg, clocks and interrupts properties' descriptions - there is no "vp" reg-name, only "wb" for write back v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and Benoit Parrot <bparrot@ti.com> v7: no change v8: no change v9: no change Signed-off-by:Rob Herring <robh@kernel.org> Reviewed-by:
-
Jyri Sarha authored
Add dt-schema yaml bindig for AM65x DSS, AM65x version TI Keystone Display SubSystem. Version history: v2: no change v3: - Add ports node - use allOf in ti,am65x-oldi-io-ctrl to add both $ref and maxItems - Add includes to dts example - reindent dts example v4: - Add descriptions to reg and clocks properties - Remove minItems when its value is the same as maxItems value v5: - itemize reg and clocks properties' descriptions v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and Benoit Parrot <bparrot@ti.com> v7: no change v8: no change Signed-off-by: -
Jyri Sarha authored
Add dt-schema yaml bindig for K2G DSS, an ultra-light version of TI Keystone Display SubSystem. Version history: v2: no change v3: - Add ports node - Add includes to dts example - reindent dts example v4: - Add descriptions to reg and clocks properties - Remove minItems when its value is the same as maxItems value - Remove ports node v5: - itemize reg and clocks properties' descriptions v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and Benoit Parrot <bparrot@ti.com> v7: no change v8: no change v9: - Remove ports-node from the dts example Signed-off-by: -
Qiang Yu authored
Increase driver version for mesa driver to identify the support of new heap buffer interface. Reviewed-by:
Vasily Khoruzhick <anarsoul@gmail.com> Tested-by:
Andreas Baierl <ichgeh@imkreisrum.de> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-6-yuq825@gmail.com
-
