- 16 Aug, 2017 4 commits
-
-
Laurent Pinchart authored
The HDMI wrapper code only needs to differentiate between major OMAP revisions, which can be obtained from the HDMI transmitter compatible string. Replace the OMAP SoC model checks to prepare for removal of the OMAP SoC version platform data. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The dsi_pll_ops structure and dsi_init_pll_data() function incorrectly use a dsi_ prefix, likely due to copy & paste. Fix it by using the correct hdmi_ prefix. Signed-off-by:
-
Tomi Valkeinen authored
We are missing OMAP5 DSIPHY lane-enable support, which has prevented OMAP5 DSI working in mainline. This patch adds the lane-enable similarly to the recently added OMAP4 version. Signed-off-by:
-
Tomi Valkeinen authored
Use regmap_update_bits instead of regmap_read/write, which simplifies the code. Signed-off-by:
-
- 15 Aug, 2017 36 commits
-
-
Laurent Pinchart authored
The header file only contains four macros, two of which are never used. Move the other two to dss.h and remove dss_features.h. Signed-off-by:
-
Laurent Pinchart authored
The supported outputs feature is specific to the DSS, move it from the omap_dss_features structure to the dss driver. The omap_dss_features structure is now empty and can be removed. Signed-off-by:
-
Laurent Pinchart authored
The FEAT_PARAM_DSS_FCK feature is specific to the DSS, move it from the omap_dss_features structure to the dss driver. Signed-off-by:
-
Laurent Pinchart authored
The FEAT_PARAM_DSS_PCD, FEAT_PARAM_LINEWIDTH and FEAT_PARAM_DOWNSCALE features are specific to the DISPC, move them from the omap_dss_features structure to the dispc driver. Signed-off-by:
-
Laurent Pinchart authored
The FEAT_PARAM_DSI* features are specific to the DSI, move them from the omap_dss_features structure to the dsi driver. Signed-off-by:
-
Laurent Pinchart authored
All the remaining FEAT_* features are specific to the DISPC, move them from the omap_dss_features structure to the dispc driver. Signed-off-by:
-
Laurent Pinchart authored
The FEAT_LCD_CLK_SRC feature is specific to the DSS, move it from the omap_dss_features structure to the dss_features structure. Signed-off-by:
-
Laurent Pinchart authored
The FEAT_DPI_USES_VDDS_DSI feature is specific to the DPI, move it from the omap_dss_features structure to the dpi code. Signed-off-by:
-
Laurent Pinchart authored
The FEAT_HDMI_* features are specific to the HDMI4, move them from the omap_dss_features structure to the hdmi4 driver. Signed-off-by:
-
Laurent Pinchart authored
The FEAT_DSI_* features are specific to the DSI, move them from the omap_dss_features structure to the dsi driver. Signed-off-by:
-
Laurent Pinchart authored
The FEAT_VENC_REQUIRES_TV_DAC_CLK is specific to the VENC, move it from the omap_dss_features structure to the venc driver. Signed-off-by:
-
Laurent Pinchart authored
The reg_fields feature describes DISPC registers only. Move it from the omap_dss_features structure to the dispc_features structure. Signed-off-by:
-
Laurent Pinchart authored
The register belongs to the DSS, move the feature to the dss_features structure. Signed-off-by:
-
Laurent Pinchart authored
The num_ovls and num_mgrs are dispc features. Move them from the omap_dss_features structure to the dispc_features structure. Signed-off-by:
-
Laurent Pinchart authored
The overlay_caps is a dispc feature. Move it from the omap_dss_features structure to the dispc_features structure. Signed-off-by:
-
Laurent Pinchart authored
The supported_color_modes is a dispc feature. Move it from the omap_dss_features structure to the dispc_features structure. Signed-off-by:
-
Laurent Pinchart authored
The buffer_size_unit and burst_size_unit are dispc features. Move them from the omap_dss_features structure to the dispc_features structure. Signed-off-by:
-
Laurent Pinchart authored
In preparation for removal of the core module, move the shutdown() handler from core to dss. Signed-off-by:
-
Laurent Pinchart authored
debugfs code is spread between the core and dss drivers. In preparation for removal of the core driver, move it all to the dss driver. Signed-off-by:
-
Laurent Pinchart authored
The DSS internal features are derived from the platform device compatible string which is available at probe time. Don't delay initialization until bind time. This prepares for the merge of the two DSS features structures that will be needed before the DSS is bound. Signed-off-by:
-
Laurent Pinchart authored
The dss driver uses the supported display types to check whether the DSS has SDI, VENC or HDMI outputs. We can instead use the supported outputs the provide the same information. This removes the last use of the supported display types, that we can then remove as well. Signed-off-by:
-
Laurent Pinchart authored
Use the compatible string instead of the OMAP SoC revision to determine device features. The various OMAP3-based SoCs can't be told apart using the compatible string, use soc_device_match() to tell them apart. Signed-off-by:
-
Laurent Pinchart authored
The DPI code only needs to differentiate between major OMAP revisions, which can be obtained from the DSS compatible string. Replace the OMAP SoC model checks to prepare for removal of the OMAP SoC version platform data. Signed-off-by:
-
Laurent Pinchart authored
Use the compatible string instead of the OMAP SoC revision to determine device features. On OMAP34xx the features depend on the ES revision that can not be determined from the compatible string. Use soc_device_match() in that case. Signed-off-by:
-
Laurent Pinchart authored
The OMAP implementation of the set_min_bus_tput() API is a no-op. There's no point in forwarding the driver calls to the platform code. Remove the use of the related platform data callback, but keep the internal function as a reminder that the feature will need to be implemented when the OMAP platform will provide support. Signed-off-by:
-
Laurent Pinchart authored
Don't rely on callback functions provided by the platform, but access the syscon internally to mux the DSI pins. Signed-off-by:
-
Laurent Pinchart authored
The DSI PLL hardware data and DSS channels are selected based on the OMAP SoC model. There's no need for fine-grained model information, as the driver only needs to differentiate between OMAP3, OMAP4 and OMAP5. As this can be done through the DSI compatible string, store the corresponding information in OF match data instead to avoid accessing the OMAP SoC model. Signed-off-by:
-
Laurent Pinchart authored
Move the two function pointers to a new dss_ops structure. This will allow merging the dss_features and omap_dss_features structures without having to expose the DPI source selection and LCD clock muxing functions in header files. Signed-off-by:
-
Laurent Pinchart authored
PHY features are stored in a global variable, while they should be properties of the PHY object. As existing OMAP platforms have a single HDMI PHY this doesn't cause any issue, but doesn't follow the driver model. Move the PHY features to the HDMI PHY data structure to follow the driver model and pave the road for multiple HDMI PHYs support. Signed-off-by:
-
Laurent Pinchart authored
The two variables are never used outside of their compilation unit, make them static. Signed-off-by:
-
Laurent Pinchart authored
The dpi_display_enable() function ensures that a VDDS_DSI regulator is available if the DSI uses the VDDS_DSI supply. This is not needed, as a failure to get the VDDS_DSI supply will result in a probe failure, dpi_display_enable() will thus never be called in that case. Remove the check, and replace tests for the FEAT_DPI_USES_VDDS_DSI feature with a test for the regulator object. Signed-off-by:
-
Laurent Pinchart authored
As non-DT booting is no longer supported, the only way to instantiate the device is through an OF node, which is guaranteed to be present. Remove the unneeded check. Signed-off-by:
-
Laurent Pinchart authored
As non-DT booting is no longer supported, the only way to instantiate the device is through an OF node, which is guaranteed to be present. Remove the unneeded check. Signed-off-by:
-
Laurent Pinchart authored
As non-DT booting is no longer supported, the only way to instantiate the device is through an OF node, which is guaranteed to be present. Remove the unneeded check. Signed-off-by:
-
Laurent Pinchart authored
SoC device attributes are registered with a call to soc_device_register() from the machine .init_late() operation, which is called from the late initcall, after all drivers built-in drivers have been probed. This results in the impossibility for drivers to use SoC device matching in their probe function. The omap_soc_device_init() function is safe to call from the machine .init() operation, as all data it depends on is initialized from the .init_early() operation. Move SoC device attribute registration to machine .init() like on all other ARM platforms. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Arvind Yadav authored
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 4669 464 0 5133 140d panel-dsi-cm.o File size After adding 'const': text data bss dec hex filename 4725 400 0 5125 1405 panel-dsi-cm.o Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
