When TSO packet is transmitted additional BD w/o mapping is used
to describe the packed. The BD needs special handling in tx
completion.

kernel: Call Trace:
kernel: <IRQ>  [<ffffffff815e19ba>] dump_stack+0x19/0x1b
kernel: [<ffffffff8105dee1>] warn_slowpath_common+0x61/0x80
kernel: [<ffffffff8105df5c>] warn_slowpath_fmt+0x5c/0x80
kernel: [<ffffffff814a8c0d>] ? find_iova+0x4d/0x90
kernel: [<ffffffff814ab0e2>] intel_unmap_page.part.36+0x142/0x160
kernel: [<ffffffff814ad0e6>] intel_unmap_page+0x26/0x30
kernel: [<ffffffffa01f55d7>] bnx2x_free_tx_pkt+0x157/0x2b0 [bnx2x]
kernel: [<ffffffffa01f8dac>] bnx2x_tx_int+0xac/0x220 [bnx2x]
kernel: [<ffffffff8101a0d9>] ? read_tsc+0x9/0x20
kernel: [<ffffffffa01f8fdb>] bnx2x_poll+0xbb/0x3c0 [bnx2x]
kernel: [<ffffffff814d041a>] net_rx_action+0x15a/0x250
kernel: [<ffffffff81067047>] __do_softirq+0xf7/0x290
kernel: [<ffffffff815f3a5c>] call_softirq+0x1c/0x30
kernel: [<ffffffff81014d25>] do_softirq+0x55/0x90
kernel: [<ffffffff810673e5>] irq_exit+0x115/0x120
kernel: [<ffffffff815f4358>] do_IRQ+0x58/0xf0
kernel: [<ffffffff815e94ad>] common_interrupt+0x6d/0x6d
kernel: <EOI>  [<ffffffff810bbff7>] ? clockevents_notify+0x127/0x140
kernel: [<ffffffff814834df>] ? cpuidle_enter_state+0x4f/0xc0
kernel: [<ffffffff81483615>] cpuidle_idle_call+0xc5/0x200
kernel: [<ffffffff8101bc7e>] arch_cpu_idle+0xe/0x30
kernel: [<ffffffff810b4725>] cpu_startup_entry+0xf5/0x290
kernel: [<ffffffff815cfee1>] start_secondary+0x265/0x27b
kernel: ---[ end trace 11aa7726f18d7e80 ]---

Fixes: a848ade4 ("bnx2x: add CSUM and TSO support for encapsulation protocols")
Reported-by: Yulong Pei <ypei@redhat.com>
Cc: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the usb speed of the RTL8152 is not high speed, the USB_DEV_STAT[2:1]
should be equal to [0 1]. That is, the STAT_SPEED_FULL should be equal
to 2.

There is a easy way to check the usb speed by the speed field of the
struct usb_device. Use it to replace the original metheod.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Spotted-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

John W. Linville says:

====================
pull request: wireless 2014-07-24

Please pull this batch of fixes intended for the 3.16 stream...

For the mac80211 fixes, Johannes says:

"I have two fixes: one for tracing that fixes a long-standing NULL
pointer dereference, and one for a mac80211 issue that causes iwlmvm to
send invalid frames during authentication/association."

and,

"One more fix - for a bug in the newly introduced code that obtains rate
control information for stations."

For the iwlwifi fixes, Emmanuel says:

"It includes a merge damage fix. This region has been changed in -next
and -fixes quite a few times and apparently, I failed to handle it
properly, so here the fix.  Along with that I have a fix from Eliad
to properly handle overlapping BSS in AP mode."

On top of that, Felix provides and ath9k fix for Tx stalls that happen
after an aggregation session failure.

Please let me know if there are problems!  There are some changes
here that will cause merge conflicts in -next.  Once you merge this
I can pull it into wireless-next and resolve those issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Ezequiel Garcia says:

====================
net: phy: Prevent an MDIO bus from being unloaded while in use

Changes from v1:
  * Dropped the unneeded module_put() on phy_attach_direct().

The motivation of this small series is to fix the current lack of relationship
between an ethernet driver and the MDIO bus behind the PHY device. In such
cases, we would find no visible link between the drivers:

  $ lsmod
  Module                  Size  Used by    Not tainted
  mvmdio                  2941  0
  mvneta                 22069  0

Which means nothing prevents the MDIO driver from being removed:

  $ modprobe -r mvmdio

  # Unable to handle kernel NULL pointer dereference at virtual address 00000060
  pgd = c0004000
  [00000060] *pgd=00000000
  Internal error: Oops: 17 [#1] SMP ARM
  Modules linked in: mvneta [last unloaded: mvmdio]
  CPU: 0 PID: 22 Comm: kworker/0:1 Not tainted 3.16.0-rc5-01127-g62c0816-dirty #608
  Workqueue: events_power_efficient phy_state_machine
  task: df5ec840 ti: df67a000 task.ti: df67a000
  PC is at phy_state_machine+0x1c/0x468
  LR is at phy_state_machine+0x18/0x468
  [snip]

This patchset fixes this problem by adding a pair of module_{get,put},
so the module reference count is increased when the PHY device is attached
and is decreased when the PHY is detached.

Tested with mvneta and mv643xx_eth drivers, which depend on the mvmdio
driver to handle MDIO. This series applies on both net and net-next branches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit adds proper module_{get,put} to prevent the MDIO bus module
from being unloaded while the phydev is connected. By doing so, we fix
a kernel panic produced when a MDIO driver is removed, but the phydev
that relies on it is attached and running.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mdiobus_register() registers a device which is already bound to a driver.
Hence, the driver pointer should be set properly in order to track down
the driver associated to the MDIO bus.

This will be used to allow ethernet driver to pin down a MDIO bus driver,
preventing it from being unloaded while the PHY device is running.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow set_settings() to complete succesfully even if link is
not estabilished and port type isn't known yet.
Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com>
Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Via Simon Horman, I received the following one-liner for your net tree:

1) Fix crash when exiting from netns that uses IPVS and conntrack,
   from Julian Anastasov via Simon Horman.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2014-07-23

Just two fixes this time, both are stable candidates.

1) Fix the dst_entry refcount on socket policy usage.

2) Fix a wrong SPI check that prevents AH SAs from getting
   installed, dependent on the SPI. From Tobias Brunner.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix to return -ENOMEM from the kalloc error handling
case instead of 0.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix to return a negative error code from the setting real tx queue
count error handling case instead of 0.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an aggregation session fails, frames still end up in the driver queue
with IEEE80211_TX_CTL_AMPDU set.
This causes tx for the affected station/tid to stall, since
ath_tx_get_tid_subframe returning packets to send.

Fix this by clearing IEEE80211_TX_CTL_AMPDU as long as no aggregation
session is running.

Cc: stable@vger.kernel.org
Reported-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Packets shorter than ETH_ZLEN were not padded with zeroes, hence leaking
potentially sensitive information. This bug has been present since the
driver got accepted in commit 1c1008c7
("net: bcmgenet: add main driver file").
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jason reported an oops caused by SCTP on his ARM machine with
SCTP authentication enabled:

Internal error: Oops: 17 [#1] ARM
CPU: 0 PID: 104 Comm: sctp-test Not tainted 3.13.0-68744-g3632f30c9b20-dirty #1
task: c6eefa40 ti: c6f52000 task.ti: c6f52000
PC is at sctp_auth_calculate_hmac+0xc4/0x10c
LR is at sg_init_table+0x20/0x38
pc : [<c024bb80>]    lr : [<c00f32dc>]    psr: 40000013
sp : c6f538e8  ip : 00000000  fp : c6f53924
r10: c6f50d80  r9 : 00000000  r8 : 00010000
r7 : 00000000  r6 : c7be4000  r5 : 00000000  r4 : c6f56254
r3 : c00c8170  r2 : 00000001  r1 : 00000008  r0 : c6f1e660
Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0005397f  Table: 06f28000  DAC: 00000015
Process sctp-test (pid: 104, stack limit = 0xc6f521c0)
Stack: (0xc6f538e8 to 0xc6f54000)
[...]
Backtrace:
[<c024babc>] (sctp_auth_calculate_hmac+0x0/0x10c) from [<c0249af8>] (sctp_packet_transmit+0x33c/0x5c8)
[<c02497bc>] (sctp_packet_transmit+0x0/0x5c8) from [<c023e96c>] (sctp_outq_flush+0x7fc/0x844)
[<c023e170>] (sctp_outq_flush+0x0/0x844) from [<c023ef78>] (sctp_outq_uncork+0x24/0x28)
[<c023ef54>] (sctp_outq_uncork+0x0/0x28) from [<c0234364>] (sctp_side_effects+0x1134/0x1220)
[<c0233230>] (sctp_side_effects+0x0/0x1220) from [<c02330b0>] (sctp_do_sm+0xac/0xd4)
[<c0233004>] (sctp_do_sm+0x0/0xd4) from [<c023675c>] (sctp_assoc_bh_rcv+0x118/0x160)
[<c0236644>] (sctp_assoc_bh_rcv+0x0/0x160) from [<c023d5bc>] (sctp_inq_push+0x6c/0x74)
[<c023d550>] (sctp_inq_push+0x0/0x74) from [<c024a6b0>] (sctp_rcv+0x7d8/0x888)

While we already had various kind of bugs in that area
ec0223ec ("net: sctp: fix sctp_sf_do_5_1D_ce to verify if
we/peer is AUTH capable") and b14878cc ("net: sctp: cache
auth_enable per endpoint"), this one is a bit of a different
kind.

Giving a bit more background on why SCTP authentication is
needed can be found in RFC4895:

  SCTP uses 32-bit verification tags to protect itself against
  blind attackers. These values are not changed during the
  lifetime of an SCTP association.

  Looking at new SCTP extensions, there is the need to have a
  method of proving that an SCTP chunk(s) was really sent by
  the original peer that started the association and not by a
  malicious attacker.

To cause this bug, we're triggering an INIT collision between
peers; normal SCTP handshake where both sides intent to
authenticate packets contains RANDOM; CHUNKS; HMAC-ALGO
parameters that are being negotiated among peers:

  ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
  <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
  -------------------- COOKIE-ECHO -------------------->
  <-------------------- COOKIE-ACK ---------------------

RFC4895 says that each endpoint therefore knows its own random
number and the peer's random number *after* the association
has been established. The local and peer's random number along
with the shared key are then part of the secret used for
calculating the HMAC in the AUTH chunk.

Now, in our scenario, we have 2 threads with 1 non-blocking
SEQ_PACKET socket each, setting up common shared SCTP_AUTH_KEY
and SCTP_AUTH_ACTIVE_KEY properly, and each of them calling
sctp_bindx(3), listen(2) and connect(2) against each other,
thus the handshake looks similar to this, e.g.:

  ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
  <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
  <--------- INIT[RANDOM; CHUNKS; HMAC-ALGO] -----------
  -------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] -------->
  ...

Since such collisions can also happen with verification tags,
the RFC4895 for AUTH rather vaguely says under section 6.1:

  In case of INIT collision, the rules governing the handling
  of this Random Number follow the same pattern as those for
  the Verification Tag, as explained in Section 5.2.4 of
  RFC 2960 [5]. Therefore, each endpoint knows its own Random
  Number and the peer's Random Number after the association
  has been established.

In RFC2960, section 5.2.4, we're eventually hitting Action B:

  B) In this case, both sides may be attempting to start an
     association at about the same time but the peer endpoint
     started its INIT after responding to the local endpoint's
     INIT. Thus it may have picked a new Verification Tag not
     being aware of the previous Tag it had sent this endpoint.
     The endpoint should stay in or enter the ESTABLISHED
     state but it MUST update its peer's Verification Tag from
     the State Cookie, stop any init or cookie timers that may
     running and send a COOKIE ACK.

In other words, the handling of the Random parameter is the
same as behavior for the Verification Tag as described in
Action B of section 5.2.4.

Looking at the code, we exactly hit the sctp_sf_do_dupcook_b()
case which triggers an SCTP_CMD_UPDATE_ASSOC command to the
side effect interpreter, and in fact it properly copies over
peer_{random, hmacs, chunks} parameters from the newly created
association to update the existing one.

Also, the old asoc_shared_key is being released and based on
the new params, sctp_auth_asoc_init_active_key() updated.
However, the issue observed in this case is that the previous
asoc->peer.auth_capable was 0, and has *not* been updated, so
that instead of creating a new secret, we're doing an early
return from the function sctp_auth_asoc_init_active_key()
leaving asoc->asoc_shared_key as NULL. However, we now have to
authenticate chunks from the updated chunk list (e.g. COOKIE-ACK).

That in fact causes the server side when responding with ...

  <------------------ AUTH; COOKIE-ACK -----------------

... to trigger a NULL pointer dereference, since in
sctp_packet_transmit(), it discovers that an AUTH chunk is
being queued for xmit, and thus it calls sctp_auth_calculate_hmac().

Since the asoc->active_key_id is still inherited from the
endpoint, and the same as encoded into the chunk, it uses
asoc->asoc_shared_key, which is still NULL, as an asoc_key
and dereferences it in ...

  crypto_hash_setkey(desc.tfm, &asoc_key->data[0], asoc_key->len)

... causing an oops. All this happens because sctp_make_cookie_ack()
called with the *new* association has the peer.auth_capable=1
and therefore marks the chunk with auth=1 after checking
sctp_auth_send_cid(), but it is *actually* sent later on over
the then *updated* association's transport that didn't initialize
its shared key due to peer.auth_capable=0. Since control chunks
in that case are not sent by the temporary association which
are scheduled for deletion, they are issued for xmit via
SCTP_CMD_REPLY in the interpreter with the context of the
*updated* association. peer.auth_capable was 0 in the updated
association (which went from COOKIE_WAIT into ESTABLISHED state),
since all previous processing that performed sctp_process_init()
was being done on temporary associations, that we eventually
throw away each time.

The correct fix is to update to the new peer.auth_capable
value as well in the collision case via sctp_assoc_update(),
so that in case the collision migrated from 0 -> 1,
sctp_auth_asoc_init_active_key() can properly recalculate
the secret. This therefore fixes the observed server panic.

Fixes: 730fc3d0 ("[SCTP]: Implete SCTP-AUTH parameter processing")
Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the expected throughput is queried before rate control has been
initialized, the minstrel op for it will crash while trying to access
the rate table.
Check for WLAN_STA_RATE_CONTROL before attempting to use the rate
control op.
Reported-by: Jean-Pierre Tosoni <jp.tosoni@acksys.fr>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Pull networking fixes from David Miller:

 1) Null termination fix in dns_resolver got the pointer dereferncing
    wrong, fix from Ben Hutchings.

 2) ip_options_compile() has a benign but real buffer overflow when
    parsing options.  From Eric Dumazet.

 3) Table updates can crash in netfilter's nftables if none of the state
    flags indicate an actual change, from Pablo Neira Ayuso.

 4) Fix race in nf_tables dumping, also from Pablo.

 5) GRE-GRO support broke the forwarding path because the segmentation
    state was not fully initialized in these paths, from Jerry Chu.

 6) sunvnet driver leaks objects and potentially crashes on module
    unload, from Sowmini Varadhan.

 7) We can accidently generate the same handle for several u32
    classifier filters, fix from Cong Wang.

 8) Several edge case bug fixes in fragment handling in xen-netback,
    from Zoltan Kiss.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits)
  ipv4: fix buffer overflow in ip_options_compile()
  batman-adv: fix TT VLAN inconsistency on VLAN re-add
  batman-adv: drop QinQ claim frames in bridge loop avoidance
  dns_resolver: Null-terminate the right string
  xen-netback: Fix pointer incrementation to avoid incorrect logging
  xen-netback: Fix releasing header slot on error path
  xen-netback: Fix releasing frag_list skbs in error path
  xen-netback: Fix handling frag_list on grant op error path
  net_sched: avoid generating same handle for u32 filters
  net: huawei_cdc_ncm: add "subclass 3" devices
  net: qmi_wwan: add two Sierra Wireless/Netgear devices
  wan/x25_asy: integer overflow in x25_asy_change_mtu()
  net: ppp: fix creating PPP pass and active filters
  net/mlx4_en: cq->irq_desc wasn't set in legacy EQ's
  sunvnet: clean up objects created in vnet_new() on vnet_exit()
  r8169: Enable RX_MULTI_EN for RTL_GIGA_MAC_VER_40
  net-gre-gro: Fix a bug that breaks the forwarding path
  netfilter: nf_tables: 64bit stats need some extra synchronization
  netfilter: nf_tables: set NLM_F_DUMP_INTR if netlink dumping is stale
  netfilter: nf_tables: safe RCU iteration on list when dumping
  ...

Pull sparc fix from David Miller:
 "Need to hook up the new renameat2 system call"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Hook up renameat2 syscall.

Pull IDE fixes from David Miller:
 - fix interrupt registry for some Atari IDE chipsets.
 - adjust Kconfig dependencies for x86_32 specific chips.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: Fix SC1200 dependencies
  ide: Fix CS5520 and CS5530 dependencies
  m68k/atari - ide: do not register interrupt if host->get_lock is set

Merge tag 'trace-fixes-v3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull trace fix from Steven Rostedt:
 "Tony Luck found that using the "uptime" trace clock that uses jiffies
  as a counter was converted to nanoseconds (silly), and after 1 hour 11
  minutes and 34 seconds, this monotonic clock would wrap, causing havoc
  with the tracing system and making the clock useless.

  He converted that clock to use jiffies_64 and made it into a counter
  instead of nanosecond conversions, and displayed the clock with the
  straight jiffy count, which works much better than it did in the past"

* tag 'trace-fixes-v3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix wraparound problems in "uptime" trace clock

Signed-off-by: David S. Miller <davem@davemloft.net>

Antonio Quartulli says:

====================
pull request [net]: batman-adv 20140721

here you have two fixes that we have been testing for quite some time
(this is why they arrived a bit late in the rc cycle).

Patch 1) ensures that BLA packets get dropped and not forwarded to the
mesh even if they reach batman-adv within QinQ frames. Forwarding them
into the mesh means messing up with the TT database of other nodes which
can generate all kind of unexpected behaviours during route computation.

Patch 2) avoids a couple of race conditions triggered upon fast VLAN
deletion-addition. Such race conditions are pretty dangerous because
they not only create inconsistencies in the TT database of the nodes
in the network, but such scenario is also unrecoverable (unless
nodes are rebooted).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a benign buffer overflow in ip_options_compile spotted by
AddressSanitizer[1] :

Its benign because we always can access one extra byte in skb->head
(because header is followed by struct skb_shared_info), and in this case
this byte is not even used.

[28504.910798] ==================================================================
[28504.912046] AddressSanitizer: heap-buffer-overflow in ip_options_compile
[28504.913170] Read of size 1 by thread T15843:
[28504.914026]  [<ffffffff81802f91>] ip_options_compile+0x121/0x9c0
[28504.915394]  [<ffffffff81804a0d>] ip_options_get_from_user+0xad/0x120
[28504.916843]  [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630
[28504.918175]  [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0
[28504.919490]  [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90
[28504.920835]  [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70
[28504.922208]  [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140
[28504.923459]  [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b
[28504.924722]
[28504.925106] Allocated by thread T15843:
[28504.925815]  [<ffffffff81804995>] ip_options_get_from_user+0x35/0x120
[28504.926884]  [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630
[28504.927975]  [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0
[28504.929175]  [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90
[28504.930400]  [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70
[28504.931677]  [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140
[28504.932851]  [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b
[28504.934018]
[28504.934377] The buggy address ffff880026382828 is located 0 bytes to the right
[28504.934377]  of 40-byte region [ffff880026382800, ffff880026382828)
[28504.937144]
[28504.937474] Memory state around the buggy address:
[28504.938430]  ffff880026382300: ........ rrrrrrrr rrrrrrrr rrrrrrrr
[28504.939884]  ffff880026382400: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28504.941294]  ffff880026382500: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr
[28504.942504]  ffff880026382600: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28504.943483]  ffff880026382700: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28504.944511] >ffff880026382800: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr
[28504.945573]                         ^
[28504.946277]  ffff880026382900: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.094949]  ffff880026382a00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.096114]  ffff880026382b00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.097116]  ffff880026382c00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.098472]  ffff880026382d00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr
[28505.099804] Legend:
[28505.100269]  f - 8 freed bytes
[28505.100884]  r - 8 redzone bytes
[28505.101649]  . - 8 allocated bytes
[28505.102406]  x=1..7 - x allocated bytes + (8-x) redzone bytes
[28505.103637] ==================================================================

[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernelSigned-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull media fixes from Mauro Carvalho Chehab:
 "A series of driver fixes:
   - fix DVB-S tuning with tda1071
   - fix tuner probe on af9035 when the device has a bad eeprom
   - some fixes for the new si2168/2157 drivers
   - one Kconfig build fix (for omap4iss)
   - fixes at vpif error path
   - don't lock saa7134 ioctl at driver's base core level, as it now
     uses V4L2 and VB2 locking schema
   - fix audio at hdpvr driver
   - fix the aspect ratio at the digital timings table
   - one new USB ID (at gspca_pac7302): Genius i-Look 317 webcam"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] gspca_pac7302: Add new usb-id for Genius i-Look 317
  [media] tda10071: fix returned symbol rate calculation
  [media] tda10071: fix spec inversion reporting
  [media] tda10071: add missing DVB-S2/PSK-8 FEC AUTO
  [media] tda10071: force modulation to QPSK on DVB-S
  [media] hdpvr: fix two audio bugs
  [media] davinci: vpif: missing unlocks on error
  [media] af9035: override tuner id when bad value set into eeprom
  [media] saa7134: use unlocked_ioctl instead of ioctl
  [media] media: v4l2-core: v4l2-dv-timings.c: Cleaning up code wrong value used in aspect ratio
  [media] si2168: firmware download fix
  [media] si2157: add one missing parenthesis
  [media] si2168: add one missing parenthesis
  [media] staging: tighten omap4iss dependencies

Pull block fixes from Jens Axboe:
 "Final block fixes for 3.16

  Four small fixes that should go into 3.16, have been queued up for a
  bit and delayed due to vacation and other euro duties.  But here they
  are.  The pull request contains:

   - Fix for a reported crash with shared tagging on SCSI from Christoph

   - A regression fix for drbd.  From Lars Ellenberg.

   - Hooking up the compat ioctl for BLKZEROOUT, which requires no
     translation.  From Mikulas.

- A fix for a regression where we woud crash on queue exit if the
  root_blkg is gone/not there. From Tejun"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: provide compat ioctl for BLKZEROOUT
  blkcg: don't call into policy draining if root_blkg is already gone
  drbd: fix regression 'out of mem, failed to invoke fence-peer helper'
  block: don't assume last put of shared tags is for the host

Pull libata fixes from Tejun Heo:
 "Late libata fixes.

  The most important one is from Kevin Hao which makes sure that libata
  only allocates tags inside the max tag number the controller supports.
  libata always had this problem but the recent tag allocation change
  and addition of support for sata_fsl which only supports queue depth
  of 16 exposed the issue.

  Hans de Goede agreed to become the maintainer of libahci_platform
  which is under higher than usual development pressure from all the new
  controllers popping up from the ARM world"

* 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)
  drivers/ata/pata_ep93xx.c: use signed int type for result of platform_get_irq()
  libata: EH should handle AMNF error condition as a media error
  libata: support the ata host which implements a queue depth less than 32
  MAINTAINERS: Add Hans de Goede as ahci-platform maintainer

Pull kvm fixes from Paolo Bonzini:
 "These are mostly PPC changes for 3.16-new things.  However, there is
  an x86 change too and it is a regression from 3.14.  As it only
  affects nested virtualization and there were other changes in this
  area in 3.16, I am not nominating it for 3.15-stable"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Check for nested events if there is an injectable interrupt
  KVM: PPC: RTAS: Do byte swaps explicitly
  KVM: PPC: Book3S PR: Fix ABIv2 on LE
  KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC()
  PPC: Add _GLOBAL_TOC for 32bit
  KVM: PPC: BOOK3S: HV: Use base page size when comparing against slb value
  KVM: PPC: Book3E: Unlock mmu_lock when setting caching atttribute

Pull s390 fixes from Martin Schwidefsky:
 "A couple of last minute bug fixes for 3.16, including a fix for ptrace
  to close a hole which allowed a user space program to write to the
  kernel address space"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: fix restore of invalid floating-point-control
  s390/zcrypt: improve device probing for zcrypt adapter cards
  s390/ptrace: fix PSW mask check
  s390/MSI: Use standard mask and unmask funtions
  s390/3270: correct size detection with the read-partition command
  s390: require mvcos facility, not tod clock steering facility

The "uptime" trace clock added in:

    commit 8aacf017
    tracing: Add "uptime" trace clock that uses jiffies

has wraparound problems when the system has been up more
than 1 hour 11 minutes and 34 seconds. It converts jiffies
to nanoseconds using:
        (u64)jiffies_to_usecs(jiffy) * 1000ULL
but since jiffies_to_usecs() only returns a 32-bit value, it
truncates at 2^32 microseconds.  An additional problem on 32-bit
systems is that the argument is "unsigned long", so fixing the
return value only helps until 2^32 jiffies (49.7 days on a HZ=1000
system).

Avoid these problems by using jiffies_64 as our basis, and
not converting to nanoseconds (we do convert to clock_t because
user facing API must not be dependent on internal kernel
HZ values).

Link: http://lkml.kernel.org/p/99d63c5bfe9b320a3b428d773825a37095bf6a51.1405708254.git.tony.luck@intel.com

Cc: stable@vger.kernel.org # 3.10+
Fixes: 8aacf017 "tracing: Add "uptime" trace clock that uses jiffies"
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When a VLAN interface (on top of batX) is removed and
re-added within a short timeframe TT does not have enough
time to properly cleanup. This creates an internal TT state
mismatch as the newly created softif_vlan will be
initialized from scratch with a TT client count of zero
(even if TT entries for this VLAN still exist). The
resulting TT messages are bogus due to the counter / tt
client listing mismatch, thus creating inconsistencies on
every node in the network

To fix this issue destroy_vlan() has to not free the VLAN
object immediately but it has to be kept alive until all the
TT entries for this VLAN have been removed. destroy_vlan()
still removes the sysfs folder so that the user has the
feeling that everything went fine.

If the same VLAN is re-added before the old object is free'd,
then the latter is resurrected and re-used.

Implement such behaviour by increasing the reference counter
of a softif_vlan object every time a new local TT entry for
such VLAN is created and remove the object from the list
only when all the TT entries have been destroyed.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>

In AP mode, configure the fw to pass beacons from
foreign APs, in order to be able to set the ht
protection IE properly.

Add the same filters in case of GO (which didn't have
any configured filter_flags, probably by mistake)
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Since bridge loop avoidance only supports untagged or simple 802.1q
tagged VLAN claim frames, claim frames with stacked VLAN headers (QinQ)
should be detected and dropped. Transporting the over the mesh may cause
problems on the receivers, or create bogus entries in the local tt
tables.
Reported-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

*_result[len] is parsed as *(_result[len]) which is not at all what we
want to touch here.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 84a7c0b1 ("dns_resolver: assure that dns_query() result is null-terminated")
Signed-off-by: David S. Miller <davem@davemloft.net>

Zoltan Kiss says:

====================
xen-netback: Fixing up xenvif_tx_check_gop

This series fixes a lot of bugs on the error path around this function, which
were introduced with my grant mapping series in 3.15. They apply to the latest
net tree, but probably to net-next as well without any modification.
I'll post an another series which applies to 3.15 stable, as the problem was
first discovered there. The only difference is that the "queue" variable name is
replaced to "vif".
====================
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Reported-by: Armin Zentai <armin.zentai@ezit.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Due to this pointer is increased prematurely, the error log contains rubbish.
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Reported-by: Armin Zentai <armin.zentai@ezit.hu>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes this function aware that the first frag and the header might
share the same ring slot. That could happen if the first slot is bigger than
PKT_PROT_LEN. Due to this the error path might release that slot twice or never,
depending on the error scenario.
xenvif_idx_release is also removed from xenvif_idx_unmap, and called separately.
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Reported-by: Armin Zentai <armin.zentai@ezit.hu>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: David S. Miller <davem@davemloft.net>

When the grant operations failed, the skb is freed up eventually, and it tries
to release the frags, if there is any. For the main skb nr_frags is set to 0 to
avoid this, but on the frag_list it iterates through the frags array, and tries
to call put_page on the page pointer which contains garbage at that time.
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Reported-by: Armin Zentai <armin.zentai@ezit.hu>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: David S. Miller <davem@davemloft.net>

The error handling for skb's with frag_list was completely wrong, it caused
double unmap attempts to happen if the error was on the first skb. Move it to
the right place in the loop.
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Reported-by: Armin Zentai <armin.zentai@ezit.hu>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Signed-off-by: David S. Miller <davem@davemloft.net>