Pull exfat fixes from Namjae Jeon:

 - Fix xfstests generic/013 test failure with dirsync mount option

 - Initialize the reserved fields of deleted file and stream extension
   dentries to zero

* tag 'exfat-for-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: zero the reserved fields of file and stream extension dentries
  exfat: fix timing of synchronizing bitmap and inode

Pull bcachefs fixes from Kent Overstreet:

 - Various syzbot fixes; mainly small gaps in validation

 - Fix an integer overflow in fiemap() which was preventing filefrag
   from returning the full list of extents

 - Fix a refcounting bug on the device refcount, turned up by new
   assertions in the development branch

 - Fix a device removal/readd bug; write_super() was repeatedly dropping
   and retaking bch_dev->io_ref references

* tag 'bcachefs-2024-05-07.2' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Add missing sched_annotate_sleep() in bch2_journal_flush_seq_async()
  bcachefs: Fix race in bch2_write_super()
  bcachefs: BCH_SB_LAYOUT_SIZE_BITS_MAX
  bcachefs: Add missing skcipher_request_set_callback() call
  bcachefs: Fix snapshot_t() usage in bch2_fs_quota_read_inode()
  bcachefs: Fix shift-by-64 in bformat_needs_redo()
  bcachefs: Guard against unknown k.k->type in __bkey_invalid()
  bcachefs: Add missing validation for superblock section clean
  bcachefs: Fix assert in bch2_alloc_v4_invalid()
  bcachefs: fix overflow in fiemap
  bcachefs: Add a better limit for maximum number of buckets
  bcachefs: Fix lifetime issue in device iterator helpers
  bcachefs: Fix bch2_dev_lookup() refcounting
  bcachefs: Initialize bch_write_op->failed in inline data path
  bcachefs: Fix refcount put in sb_field_resize error path
  bcachefs: Inodes need extra padding for varint_decode_fast()
  bcachefs: Fix early error path in bch2_fs_btree_key_cache_exit()
  bcachefs: bucket_pos_to_bp_noerror()
  bcachefs: don't free error pointers
  bcachefs: Fix a scheduler splat in __bch2_next_write_buffer_flush_journal_buf()

Pull ARM SoC fixes from Arnd Bergmann:
 "These are a couple of last minute fixes that came in over the previous
  week, addressing:

   - A pin configuration bug on a qualcomm board that caused issues with
     ethernet and mmc

   - Two minor code fixes for misleading console output in the microchip
     firmware driver

   - A build warning in the sifive cache driver"

* tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  firmware: microchip: clarify that sizes and addresses are in hex
  firmware: microchip: don't unconditionally print validation success
  arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
  cache: sifive_ccache: Silence unused variable warning

Pull pci fixes from Bjorn Helgaas:

 - Update kernel-parameters doc to describe "pcie_aspm=off" more
   accurately (Bjorn Helgaas)

 - Restore the parent's (not the child's) ASPM state to the parent
   during resume, which fixes a reboot during resume (Kai-Heng Feng)

* tag 'pci-v6.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI/ASPM: Restore parent state to parent, child state to child
  PCI/ASPM: Clarify that pcie_aspm=off means leave ASPM untouched

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_write_super() was looping over online devices multiple times -
dropping and retaking io_ref each time.

This meant it could race with device removal; it could increment the
sequence number on a device but fail to write it - and then if the
device was re-added, it would get confused the next time around thinking
a superblock write was silently dropped.

Fix this by taking io_ref once, and stashing pointers to online devices
in a darray.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Merge tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

One more Qualcomm Arm64 DeviceTree fix for v6.9

On ths SA8155P automotive platform, the wrong gpio controller is defined
for the SD-card detect pin, which depending on probe ordering of things
cause ethernet to be broken. The card detect pin reference is corrected
to solve this problem.

* tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration

Link: https://lore.kernel.org/r/20240427153817.1430382-1-andersson@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Pull btrfs fixes from David Sterba:
 "Two more fixes, both have some visible effects on user space:

   - add check if quotas are enabled when passing qgroup inheritance
     info, this affects snapper that could fail to create a snapshot

   - do check for leaf/node flag WRITTEN earlier so that nodes are
     completely validated before access, this used to be done by
     integrity checker but it's been removed and left an unhandled case"

* tag 'for-6.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: make sure that WRITTEN is set on all metadata blocks
  btrfs: qgroup: do not check qgroup inherit if qgroup is disabled

This reverts commit 07ed11af.

Stephen Rostedt reports:
 "I went to run my tests on my VMs and the tests hung on boot up.
  Unfortunately, the most I ever got out was:

  [   93.607888] Testing event system initcall: OK
  [   93.667730] Running tests on all trace events:
  [   93.669757] Testing all events: OK
  [   95.631064] ------------[ cut here ]------------
  Timed out after 60 seconds"

and further debugging points to a possible circular locking dependency
between the console_owner locking and the worker pool locking.

Reverting the commit allows Steve's VM to boot to completion again.

[ This may obviously result in the "[TTM] Buffer eviction failed"
  messages again, which was the reason for that original revert. But at
  this point this seems preferable to a non-booting system... ]
Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/20240502081641.457aa25f@gandalf.local.home/Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Alex Constantino <dreaming.about.electric.sheep@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Timo Lindfors <timo.lindfors@iki.fi>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There's a typo that makes parent device uses child LNKCTL value and vice
versa. This causes Micron NVMe to trigger a reboot upon system resume.

Correct the typo to fix the issue.

Fixes: 64dbb2d7 ("PCI/ASPM: Disable L1 before configuring L1 Substates")
Link: https://lore.kernel.org/r/20240506051602.1990743-1-kai.heng.feng@canonical.comSigned-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: update subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Pull slab fixes from Vlastimil Babka:

 - Fix for cleanup infrastructure (Dan Carpenter)

   This makes the __free(kfree) cleanup hooks not crash on error
   pointers.

 - SLUB fix for freepointer checking (Nicolas Bouchinet)

   This fixes a recently introduced bug that manifests when
   init_on_free, CONFIG_SLAB_FREELIST_HARDENED and consistency checks
   (slub_debug=F) are all enabled, and results in false-positive
   freepointer corrupt reports for caches that store freepointer outside
   of the object area.

* tag 'slab-for-6.9-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm/slab: make __free(kfree) accept error pointers
  mm/slub: avoid zeroing outside-object freepointer for single free

Merge tag 'auxdisplay-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay

Pull auxdisplay fixes from Andy Shevchenko:

 - A couple of non-critical build fixes to Character LCD library

 - Miscellaneous fixes here and there

* tag 'auxdisplay-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay:
  auxdisplay: charlcd: Don't rebuild when CONFIG_PANEL_BOOT_MESSAGE=y
  auxdisplay: charlcd: Add missing MODULE_DESCRIPTION()
  auxdisplay: seg-led-gpio: Convert to platform remove callback returning void
  auxdisplay: linedisp: Group display drivers together

Define a constant for the max superblock size, to avoid a too-large
shift.

Reported-by: syzbot+a8b0fb419355c91dda7f@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_fs_quota_read_inode() wasn't entirely updated to the
bch2_snapshot_tree() helper, which takes rcu lock.

Reported-by: syzbot+a3a9a61224ed3b7f0010@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Ancient versions of bcachefs produced packed formats that could
represent keys that our in memory format cannot represent;
bformat_needs_redo() has some tricky shifts to check for this sort of
overflow.

Reported-by: syzbot+594427aebfefeebe91c6@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

For forwards compatibility we have to allow unknown key types, and only
run the checks that make sense against them.

Fix a missing guard on k.k->type being known.

Reported-by: syzbot+ae4dc916da3ce51f284f@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We were forgetting to check for jset entries that overrun the end of the
section - both in validate and to_text(); to_text() needs to be safe for
types that fail to validate.

Reported-by: syzbot+c48865e11e7e893ec4ab@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+10827fa6b176e1acf1d0@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

filefrag (and potentially other utilities that call fiemap) sometimes
pass ULONG_MAX as the length.  fiemap_prep clamps excessively large
lengths - but the calculation of end can overflow if it occurs before
calling fiemap_prep.  When this happens, filefrag assumes it has read to
the end and exits.
Signed-off-by: Reed Riley <reed@riley.engineer>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The bucket_gens array is a single array allocation (one byte per
bucket), and kernel allocations are still limited to INT_MAX.

Check this limit to avoid failing the bucket_gens array allocation.

Reported-by: syzbot+b29f436493184ea42e2b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_get_next_dev() and bch2_get_next_online_dev() iterate over devices,
dropping and taking refs as they go; we can't access the previous device
(for ca->dev_idx) after we've dropped our ref to it, unless we take
rcu_read_lock() first.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_dev_lookup() is supposed to take a ref on the device it returns, but
for_each_member_device() takes refs as it iterates,
for_each_member_device_rcu() does not.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Normally this is initialized in __bch2_write(), which is executed in a
loop, but the inline data path skips this.

Reported-by: syzbot+fd3ccb331eb21f05d13b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+66b9b74f6520068596a9@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+a35cdb62ec34d44fb062@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We don't want the assert when we're checking if the backpointer is
valid.

Reported-by: syzbot+bf7215c0525098e7747a@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+3333603f569fc2ef258c@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We're using mutex_lock() inside a wait_event() conditional -
prepare_to_wait() has already flipped task state, so potentially
blocking ops need annotation.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.

Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.

Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull EDAC fixes from Borislav Petkov:

 - Fix error logging and check user-supplied data when injecting an
   error in the versal EDAC driver

* tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/versal: Do not log total error counts
  EDAC/versal: Check user-supplied data before injecting an error
  EDAC/versal: Do not register for NOC errors

Pull powerpc fixes from Michael Ellerman:

 - Fix incorrect delay handling in the plpks (keystore) code

 - Fix a panic when an LPAR boots with a frozen PE

Thanks to Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, and Nayna
Jain.

* tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE
  powerpc/pseries: make max polling consistent for longer H_CALLs

Pull misc x86 fixes from Ingo Molnar:

 - Remove the broken vsyscall emulation code from
   the page fault code

 - Fix kexec crash triggered by certain SEV RMP
   table layouts

 - Fix unchecked MSR access error when disabling
   the x2APIC via iommu=off

* tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Remove broken vsyscall emulation code from the page fault code
  x86/apic: Don't access the APIC when disabling x2APIC
  x86/sev: Add callback to apply RMP table fixups for kexec
  x86/e820: Add a new e820 table update helper

Pull irq fix from Ingo Molnar:
 "Fix suspicious RCU usage in __do_softirq()"

* tag 'irq-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  softirq: Fix suspicious RCU usage in __do_softirq()

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc/other driver fixes and new device ids
  for 6.9-rc7 that resolve some reported problems.

  Included in here are:

   - iio driver fixes

   - mei driver fix and new device ids

   - dyndbg bugfix

   - pvpanic-pci driver bugfix

   - slimbus driver bugfix

   - fpga new device id

  All have been in linux-next with no reported problems"

* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  slimbus: qcom-ngd-ctrl: Add timeout for wait operation
  dyndbg: fix old BUG_ON in >control parser
  misc/pvpanic-pci: register attributes via pci_driver
  fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
  mei: me: add lunar lake point M DID
  mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
  iio:imu: adis16475: Fix sync mode setting
  iio: accel: mxc4005: Reset chip on probe() and resume()
  iio: accel: mxc4005: Interrupt handling fixes
  dt-bindings: iio: health: maxim,max30102: fix compatible check
  iio: pressure: Fixes SPI support for BMP3xx devices
  iio: pressure: Fixes BME280 SPI driver data

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver fixes for reported problems for
  6.9-rc7. Included in here are:

   - usb core fixes for found issues

   - typec driver fixes for reported problems

   - usb gadget driver fixes for reported problems

   - xhci build fixes

   - dwc3 driver fixes for reported issues

  All of these have been in linux-next this past week with no reported
  problems"

* tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tcpm: Check for port partner validity before consuming it
  usb: typec: tcpm: enforce ready state when queueing alt mode vdm
  usb: typec: tcpm: unregister existing source caps before re-registration
  usb: typec: tcpm: clear pd_event queue in PORT_RESET
  usb: typec: tcpm: queue correct sop type in tcpm_queue_vdm_unlocked
  usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device
  usb: ohci: Prevent missed ohci interrupts
  usb: typec: qcom-pmic: fix pdphy start() error handling
  usb: typec: qcom-pmic: fix use-after-free on late probe errors
  usb: gadget: f_fs: Fix a race condition when processing setup packets.
  USB: core: Fix access violation during port device removal
  usb: dwc3: core: Prevent phy suspend during init
  usb: xhci-plat: Don't include xhci.h
  usb: gadget: uvc: use correct buffer size when parsing configfs lists
  usb: gadget: composite: fix OS descriptors w_value logic
  usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete

Pull input fixes from Dmitry Torokhov:

 - a new ID for ASUS ROG RAIKIRI controllers added to xpad driver

 - amimouse driver structure annotated with __refdata to prevent section
   mismatch warnings.

* tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: amimouse - mark driver struct with __refdata to prevent section mismatch
  Input: xpad - add support for ASUS ROG RAIKIRI

Merge tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fix from Masami Hiramatsu:

 - probe-events: Fix memory leak in parsing probe argument.

   There is a memory leak (forget to free an allocated buffer) in a
   memory allocation failure path. Fix it to jump to the correct error
   handling code.

* tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/probes: Fix memory leak in traceprobe_parse_probe_arg_body()