- 23 Apr, 2019 26 commits
-
-
Benjamin Tissoires authored
On the gaming mice, there are 2 interfaces, one for the mouse and one for the macros. Better allow everybody to go through hid-logitech-hidpp than trying to be smarter. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
Add support for the Logitech Bluetooth Mini-Receiver in HID proxy mode This requires some special handing in dj_find_receiver_dev because the BT Mini-Receiver contains a built-in hub and has separate USB-devices for the keyboard and mouse interfaces, rather then using 2 interfaces on a single USB device. Otherwise this receiver works identical to the standard non-unifying nano receivers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
Make the appending of the HID++ descriptors in logi_dj_ll_parse conditional. This is a preparation patch for adding support for the Logitech mini Bluetooth receiver in HID proxy mode (its default mode), where some of the paired devices may not be Logitech devices and thus may not be HID++ capable. This uses a fake bit 63 in reports_supported, which is changed from an u32 to an u64 for this. Bits <= 31 are not usable for this because that would cause a behavioral change in logi_dj_recv_forward_null_report. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
The various functions queueing work-items do not check there already is a work-item queued before calling schedule_work(), as such they may race with each-other and with the re-queuing done by the delayedwork_callback itself. This is fine as the delayedwork_callback simply is a nop if scheduled once too much. I've actually seen the false-positive hid_err for this trigger in practice, so lets remove it. While at it also remove the somewhat overzealous debugging around the schedule_work() calls. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
hidpp_unifying_get_name() does not work for devices attached to non-unifying receivers. Since we do get a device-type in the device- connection report, we can pick a better name for these devices in hid-logitech-dj.c . Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
My Aten cs1764a KVM adds an extra interface to the receiver through which it forwards mouse events, if a separate mouse is plugged in next to the receiver dongle. This interface is present even if no extra mouse is plugged in. logitech-dj trying to handle this extra interface causes mouse events send through the extra interface to not be properly handled. This commit fixes this by treating any extra interfaces as hid-generic interfaces. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
Use hid_err consistently everywhere. While at it also tweak some of the messages for clarity, to consistently have a space after a ':' and in some cases to fit within 80 chars. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
27 MHz mouse-only receivers send an unnumbered input report with the mouse data, add special handling for this and add the c51b product-id to the logi_dj_receivers table. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
Most Logitech wireless keyboard and mice using the 27 MHz are hidpp10 devices, add support to logitech-dj for their receivers. Doing so leads to 2 improvements: 1) All these devices share the same USB product-id for their receiver, making it impossible to properly map some special keys / buttons which differ from device to device. Adding support to logitech-dj to see these as hidpp10 devices allows us to get the actual device-id from the keyboard / mouse. 2) It enables battery-monitoring of these devices This patch uses a new HID group for 27Mhz devices, since the logitech-hidpp code needs to be able to differentiate them from other devices instantiated by the logitech-dj code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Benjamin Tissoires authored
This receiver is almost identical to the normal unifying ones except: - it is supposed to be paired to only one device (for performance reasons) - the mice reports have a greater ranges in their values, so they are using a different report ID. Tested on a G403 and a G900. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
We emulate the DJ functionality through the driver. The receiver supports "fake device arrival" which behaves like the probing of DJ devices. A non-unifying receiver has 2 USB interfaces, the first one generates standard keypresses and is compatible with the USB Keyboard Boot Subclass. The second interface sends events for the mouse and special keys such as the consumer-page keys. Events are split this way for BIOS / Windows / generic-hid driver compatibility. This split does not actually match with which device the event originate from, e.g. the consumer-page key events originate from the keyboard but are delivered on the mouse interface. To make sure the events are actually delivered to the dj_device representing the originating device, we pick which dj_dev to forward a "regular" input-report to based on the report-number, rather then based on the originating interface. Co-authored-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
Add a logi_dj_recv_queue_unknown_work helper and implement query rate-limiting inside this helper. The motivations behind this are: 1) We need to queue workitems for reports with no place to forward them from more places with the upcoming non-unifying receiver support, hence the addition of the helper function. 2) When we've missed a pairing info report (or there is a race between the report and input-events) and the input report is e.g. from a mouse being moved, we will get a lot of these before we've finished (re-) querying and enumerating the devices, hence the rate-limiting. Note this also removes the: if (!djrcv_dev->paired_dj_devices[hidpp_report->device_index]) check previously guarding the sending of an unknown workitem, the caller of logi_dj_recv_queue_notification already does this check before calling logi_dj_recv_queue_notification. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
dj/HID++ receivers are really a single logical entity, but for BIOS/Windows compatibility they have multiple USB interfaces. For the upcoming non-unifying receiver support, we need to listen for events from / bind to all USB-interfaces of the receiver. This commit add support to the logitech-dj code for creating a single dj_receiver_dev struct for all interfaces belonging to a single USB-device / receiver, in preparation for adding non-unifying receiver support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
For the upcoming non-unifying receiver support, we are going to bind to all USB-interfaces of a receiver, sharing a single struct dj_receiver_dev between the interfaces. This means that dj_receiver_dev will contain multiple pointers to a struct hid_device. Rename the current hdev member to hidpp to prepare for this. While at it switch dev_err calls which we are touching anyways from dev_err to hid_err. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
This protects against logi_dj_recv_add_djhid_device, adding a device to paired_dj_devices from the delayedwork callback, racing versus logi_dj_raw_event trying to access that device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Hans de Goede authored
querying_devices is never set, so it can safely be removed. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Benjamin Tissoires authored
This is a preparatory patch for handling non DJ (HID++ only) receivers, through this module. We can not use the dj_report in the delayed work callback as the HID++ notifications are different both in size and meaning. There should be no functional change. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Benjamin Tissoires authored
It is better to rely on the actual content of the report descriptors to enable or not a HID interface. While at it, remove the other USB dependency to have a fully USB agnostic driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Benjamin Tissoires authored
For the non DJ receivers, we are going to need to re-use those constants, better have them properly defined. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Benjamin Tissoires authored
Use BIT() macro for RF Report types. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Benjamin Tissoires authored
we are not dealing with a dj_report but a hidpp_event. We don't need all of the struct description in this function, but having the variable named `dj_report` feels weird. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Benjamin Tissoires authored
logi_dj_recv_forward_report() was only intended for DJ reports. logi_dj_recv_forward_hidpp() is more generic at forwarding random HID reports. So rename logi_dj_recv_forward_report() into logi_dj_recv_forward_dj() and logi_dj_recv_forward_hidpp() into logi_dj_recv_forward_report(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Benjamin Tissoires authored
There is no need to set drvdata to NULL on probe failure and remove, the driver-core already does this for us. [hdegoede@redhat.com: Isolate Logitech changes into a separate patch] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Benjamin Tissoires authored
I am actually suggesting people to not populate this list, and I should probably start to apply my advices to myself. The end result means that if your initrd is lacking hid-logitech-dj or hid-logitech-hidpp, but still contains hid-generic, then your keyboard will work during pre-init. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Benjamin Tissoires authored
-
Srinivas Pandruvada authored
Add Comet Lake PCI device ID to the supported device list. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 11 Apr, 2019 1 commit
-
-
Hui Wang authored
This reverts commit 74e7c6c8. It finally turns out the touchpad is an engineering sample and it is not the Synaptics touchpad. Let us revert this patch otherwise it will affect the real Synaptics touchpad. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 03 Apr, 2019 1 commit
-
-
Dmitry Torokhov authored
According to HUTRR89 usage 0x1cb from the consumer page was assigned to allow launching desktop-aware assistant application, so let's add the mapping. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 01 Apr, 2019 4 commits
-
-
Hui Wang authored
We have a new Dell laptop which has the synaptics I2C touchpad (06cb:7e7e) on it. After booting up the Linux, the touchpad doesn't work, there is no interrupt when touching the touchpad, after disable the runtime PM, everything works well. I also tried the quirk of I2C_HID_QUIRK_DELAY_AFTER_SLEEP, it is better after applied this quirk, there are interrupts but data it reports is invalid. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Hans de Goede authored
According to hidpp20_batterylevel_get_battery_info my Logitech K270 keyboard reports only 2 battery levels. This matches with what I've seen after testing with batteries at varying level of fullness, it always reports either 5% or 30%. Windows reports "battery good" for the 30% level. I've captured an USB trace of Windows reading the battery and it is getting the same info as the Linux hidpp code gets. Now that Linux handles these devices as hidpp devices, it reports the battery as being low as it treats anything under 31% as low, this leads to the user constantly getting a "Keyboard battery is low" warning from GNOME3, which is very annoying. This commit fixes this by changing the low threshold to anything under 30%, which I assume is what Windows does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Hans de Goede authored
Remove the hidpp_is_connected() function wrapper, and have the callers directly call hidpp_root_get_protocol_version() instead. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Hans de Goede authored
Simply always print the HID++ version on hidpp_root_get_protocol_version success. This also fixes the version not being printed when a HID++ device connected through a receiver is already connected when the hidpp driver is loaded. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 27 Mar, 2019 1 commit
-
-
Jeffrey Hugo authored
Similar to commit edfc3722 ("HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working"), the Lenovo Miix 630 has a combo keyboard/touchpad device with vid:pid of 04F3:0400, which is shared with Elan touchpads. The combo on the Miix 630 has an ACPI id of QTEC0001, which is not claimed by the elan_i2c driver, so key on that similar to what was done for the Toshiba Click Mini. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 20 Mar, 2019 1 commit
-
-
Peter Hutterer authored
hidpp_scroll_counter_handle_scroll() doesn't expect a 0-value scroll event, it gets interpreted as a negative scroll direction event. This can cause scroll direction resets and thus broken scrolling. Fixes: 4435ff2f ("HID: logitech: Enable high-resolution scrolling on Logitech mice") Cc: stable@vger.kernel.org # v5.0 Reported-and-tested-by: Aimo Metsälä <aimetsal@outlook.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
- 19 Mar, 2019 2 commits
-
-
He, Bo authored
There is a race condition that could happen if hid_debug_rdesc_show() is running while hdev is in the process of going away (device removal, system suspend, etc) which could result in NULL pointer dereference: BUG: unable to handle kernel paging request at 0000000783316040 CPU: 1 PID: 1512 Comm: getevent Tainted: G U O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1 RIP: 0010:hid_dump_device+0x9b/0x160 Call Trace: hid_debug_rdesc_show+0x72/0x1d0 seq_read+0xe0/0x410 full_proxy_read+0x5f/0x90 __vfs_read+0x3a/0x170 vfs_read+0xa0/0x150 ksys_read+0x58/0xc0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x55/0x110 entry_SYSCALL_64_after_hwframe+0x49/0xbe Grab driver_input_lock to make sure the input device exists throughout the whole process of dumping the rdesc. [jkosina@suse.cz: update changelog a bit] Signed-off-by: he, bo <bo.he@intel.com> Signed-off-by: "Zhang, Jun" <jun.zhang@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Kangjie Lu authored
create_singlethread_workqueue may fail and return NULL. The fix checks if it is NULL to avoid NULL pointer dereference. Also, the fix moves the call of create_singlethread_workqueue earlier to avoid resource-release issues. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 18 Mar, 2019 2 commits
-
-
Kai-Heng Feng authored
Commit 71f6fa90 ("HID: increase maximum global item tag report size to 256") increases the max report size from 128 to 256. We also need to update the report size in hid_field_extract() otherwise it complains and truncates now valid report size: [ 406.165461] hid-sensor-hub 001F:8086:22D8.0002: hid_field_extract() called with n (192) > 32! (kworker/5:1) BugLink: https://bugs.launchpad.net/bugs/1818547 Fixes: 71f6fa90 ("HID: increase maximum global item tag report size to 256") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Rodrigo Rivas Costa authored
When using this driver with the wireless dongle and some usermode program that monitors every input device (acpid, for example), while another usermode client opens and closes the low-level device repeadedly, the system eventually deadlocks. The reason is that steam_input_register_device() must not be called with the mutex held, because the input subsystem has its own synchronization that clashes with this one: it is possible that steam_input_open() is called before input_register_device() returns, and since steam_input_open() needs to lock the mutex, it deadlocks. However we must hold the mutex when calling any function that sends commands to the controller. If not, random commands end up falling fail. Reported-by: Simon Gene Gottlieb <simon@gottliebtfreitag.de> Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Tested-by: Simon Gene Gottlieb <simon@gottliebtfreitag.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 11 Mar, 2019 2 commits
-
-
Colin Ian King authored
Currently ver_ptr is being null checked twice, once before calling usb_string and once afterwards. The second null check is redundant and can be removed, remove it. Detected by CoverityScan, CID#1477308 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-
Andy Shevchenko authored
The kernel-doc annotation is misused for hid_mouse_ignore_list. The script complains about it: drivers/hid/hid-quirks.c:894: warning: cannot understand function prototype: 'const struct hid_device_id hid_mouse_ignore_list[] = ' Drop the annotation to make script happy. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
-