- 14 Jun, 2024 40 commits
-
-
Ivan Lipski authored
[WHY] Coverity analysis of the Upstream display driver code (amd-staging-drm-next) flagged these three functions as containing 'CONSTANT_EXPRESSION_RESULT' errors, i. e. the conditionals are reduntant since their result is predetermined. fixpt31_32.c: The two flagged 'ASSERT' lines redundant since they are always true: - LONG_MAX equals to the largest 'signed long long' number - res.value is type 'signed long long', So, the condition inside the 'ASSERTS's is always link_dp_training.c: The flagged conditional statement is always false: - 'max_requested.FFE_PRESET.settings.level' is 4 bits, so its max possible value is 15 - 'DP_FFE_PRESET_MAX_LEVEL' equals to 15. So, the conditional statement is always false and the wrapped code never executes. [HOW] Removed lines flagged by Coverity analysis. Reviewed-by:
Sun peng Li <sunpeng.li@amd.com> Acked-by:
Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by:
Ivan Lipski <ivlipski@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alvin Lee authored
[Description] hardare_release() is called when driver is removed. Add the missing hook for DCN401 Reviewed-by:
Dillon Varone <dillon.varone@amd.com> Acked-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
-
Wenjing Liu authored
[why] In YCbCr422 format hardware shares 1 set of chromas CbCr with 2 sets of lumas Y. Therefore each ODM segment needs to be two pixel aligned. The commit adds this missing hardwware requirement into ODM segment width decision logic. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
JinZe.Xu authored
[Why&How] Add flag to disable IPS when it is not allowed. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
JinZe.Xu <jinze.xu@amd.com> Tested-by:
-
Sung-huai Wang authored
[How&Why] This reverts commit 239b31bd. Due to the it effects Replay resync. Reviewed-by:
Sung-huai Wang <danny.wang@amd.com> Tested-by:
-
Alex Hung authored
[WHY & HOW] The comparisons of unsigned int with 0 can have no meanings, i.e. unsigned int >= 0 (always true) or unsigned int < 0 (always false), and therefore they are removed. This fixes 12 NO_EFFECT issues reported by Coverity. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
Alex Hung <alex.hung@amd.com> Tested-by:
-
Alex Hung authored
This fixes an UNINIT issue reported by Coverity. Reviewed-by:
-
Alex Hung authored
[WHY] fe_clk_en and be_clk_sel have size of 4 but sizeof(fe_clk_en) has byte size 16 which is lager than the array size. [HOW] Use ARRAY_SIZE for calculating size. This fixes 2 OVERRUN issues reported by Coverity. Reviewed-by:
-
Sridevi Arvindekar authored
Move pipe_ctx variables to start of the function and add a helpful comment Co-authored-by:
Sridevi Arvindekar <sarvinde@amd.com> Reviewed-by:
Ilya Bakoulin <ilya.bakoulin@amd.com> Acked-by:
-
Rodrigo Siqueira authored
Coverity highlighted that the parameter otg_master is referenced before the if condition that validates it, which means that the code might have some attempt to access a null pointer. This commit addresses this issue by moving the pointer verification to the beginning of the function and initializing all the values right after it. Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] DMCUB can intermittently take longer than expected to process commands. Old ASIC policy was to continue while logging a diagnostic error - which works fine for ASIC without IPS, but with IPS this could lead to a race condition where we attempt to access DCN state while it's inaccessible, leading to a system hang when the NIU port is not disabled or register accesses that timeout and the display configuration in an undefined state. [How] We need to investigate why these accesses take longer than expected, but for now we should disable the timeout on DCN35 to avoid this race condition. Since the waits happen only at lower interrupt levels the risk of taking too long at higher IRQ and causing a system watchdog timeout are minimal. Reviewed-by:
Ovidiu Bunea <ovidiu.bunea@amd.com> Acked-by:
-
Wenjing Liu authored
[why] We set preferred link settings for virtual signal. However we don't support virtual signal for UHBR link rate. If preferred is set to UHBR link rate, we will allow virtual signal with UHBR link rate which causes system crashes. Reviewed-by:
-
Wenjing Liu authored
[why] DML1 validation code doesn't have the ability to remove ODM combine. It will directly translate currently used ODM combine config into ODM override. If ODM combine is used in the initial state it will only validate the timing if ODM is used. This is not correct for dynamic ODM u se case, as ODM is used as an optimization not a hard requirement. [how] Remove ODM combine in the initial state before bandwidth validation so DML will not translate it into ODM override in the initial bandwidth validation. Reviewed-by:
-
Wenjing Liu authored
[why] There are cases where update pipe params could fail but dpp pipes are already added to the state. In this case, we should remove dpp pipes so dc state is restored back. If it is not restored, dc state is corrupted after calling this function, so if we call the same interface with the corrupted state again, we may end up programming pipe topology based on a corrupted dc state. Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] These registers should not be read from driver and triggering the security violation when DMCUB work times out and diagnostics are collected blocks Z8 entry. [How] Remove the register read from DCN35. Reviewed-by:
Duncan Ma <duncan.ma@amd.com> Acked-by:
-
Leo Li authored
[Why] Compositors have different ways of assigning surfaces to DRM planes for render offloading. It may decide between various strategies: overlay, underlay, or a mix of both (see here for more info: https://gitlab.freedesktop.org/emersion/libliftoff/-/issues/76) One way for compositors to implement the underlay strategy is to assign a higher zpos to the DRM_PRIMARY plane than the DRM_OVERLAY planes, effectively turning the DRM_OVERLAY plane into an underlay plane. Today, amdgpu attaches an immutable zpos of 0 to the DRM_PRIMARY plane. This however, is an arbitrary restriction. DCN pipes are general purpose, and can be arranged in any z-order. To support compositors using this allocation scheme, we can set a non-zero immutable zpos for the PRIMARY, allowing the placement of OVERLAYS (mutable zpos range 0-254) beneath the PRIMARY. [How] Assign a zpos = #no of OVERLAY planes to the PRIMARY plane. Then, clean up any assumptions in the driver of PRIMARY plane having the lowest zpos. v2: Fix typo s/decending/descending/ Reviewed-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Tested-by:
-
Leo Li authored
[Why] DCN is the display hardware for amdgpu. DRM planes are backed by DCN hardware pipes, which carry pixel data from one end (memory), to the other (output encoder). Each DCN pipe has the ability to blend in a cursor early on in the pipeline. In other words, there are no dedicated cursor planes in DCN, which makes cursor behavior somewhat unintuitive for compositors. For example, if the cursor is in RGB format, but the top-most DRM plane is in YUV format, DCN will not be able to blend them. Because of this, amdgpu_dm rejects all configurations where a cursor needs to be enabled on top of a YUV formatted plane. From a compositor's perspective, when computing an allocation for hardware plane offloading, this cursor-on-yuv configuration result in an atomic test failure. Since the failure reason is not obvious at all, compositors will likely fall back to full rendering, which is not ideal. Instead, amdgpu_dm can try to accommodate the cursor-on-yuv configuration by opportunistically reserving a separate DCN pipe just for the cursor. We can refer to this as "overlay cursor mode". It is contrasted with "native cursor mode", where the native DCN per-pipe cursor is used. [How] On each crtc, compute whether the cursor plane should be enabled in overlay mode. If it is, mark the CRTC as requesting overlay cursor mode. Overlay cursor should be enabled whenever there exists a underlying plane that has YUV format, or is scaled differently than the cursor. It should also be enabled if there is no underlying plane, or if underlying planes do not cover the entire CRTC. During DC validation, attempt to enable a separate DCN pipe for the cursor if it's in overlay mode. If that fails, or if no overlay mode is requested, then fallback to native mode. v2: * Update commit message for when overlay cursor should be enabled * Also consider scale and no-underlying-plane case (cursor on crtc bg) * Consider all underlying planes when determinig overlay/native, not just the plane immediately beneath the cursor, as it may not cover the entire CRTC. * Fix typo s/decending/descending/ * Force native cursor on pre-DCN hardware Reviewed-by:
-
Josip Pavic authored
[Why & How] Define debug interface to dmub for reading back abm data. Reviewed-by:
Anthony Koo <anthony.koo@amd.com> Acked-by:
Josip Pavic <josip.pavic@amd.com> Tested-by:
-
Wayne Lin authored
[Why] dm_dp_mst_is_port_support_mode() is a bit not following the original design rule and cause light up issue with multiple 4k monitors after mst dsc hub. [How] Refactor function dm_dp_mst_is_port_support_mode() a bit to solve the light up issue. Reviewed-by:
Jerry Zuo <jerry.zuo@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Tested-by:
-
Wayne Lin authored
[Why] When unplug one of monitors connected after mst hub, encounter null pointer dereference. It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When commit new state which directly referring to info stored in dc_sink will cause null pointer dereference. [how] Remove redundant checking condition. Relevant condition should already be covered by checking if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected. Reviewed-by:
-
Paul Hsieh authored
[Why & How] Current DRAM setting would cause underflow on customer platform. Modify dram_clock_change_latency_us from 11.72 to 34.0 us as per recommendation from HW team Reviewed-by:
Paul Hsieh <paul.hsieh@amd.com> Tested-by:
-
Daniel Miess authored
[Why] Intermittent underflow observed when using 4k144 display on dcn351 [How] Update dram_clock_change_latency_us from 11.72us to 34us Reviewed-by:
Daniel Miess <daniel.miess@amd.com> Tested-by:
-
Wayne Lin authored
[Why & How] It actually exposes '6' types in enum dmub_notification_type. Not 5. Using smaller number to create array dmub_callback & dmub_thread_offload has potential to access item out of array bound. Fix it. Reviewed-by:
-
Wayne Lin authored
[Why & How] Link hpd status is set during link detection process via dpia_query_hpd_status(), doesn't need to explicitly set it during outbox irq. Remove it. Reviewed-by:
-
Wayne Lin authored
[Why & How] Debug msg for usb4/tbt now is a bit confusing. Adjust it for better reading. Reviewed-by:
-
Chris Park authored
[Why] Reference clock, either DPREFCLK or DTBCLK can be a value of 0 which then will encounter division by 0. [How] Avoid further calculation and programming if refclk is not populated. Reviewed-by:
Chris Park <chris.park@amd.com> Tested-by:
-
Joshua Aberback authored
[Why] DCN401 currently has an issue re-enabling when pipe splitting is enabled, while the root cause is being investigated we can make sure everything is being reset as a workaround, by disabling boot optimization. [How] - use enable_accelerated_mode instead of init_pipes to fully reset asic Reviewed-by:
Joshua Aberback <joshua.aberback@amd.com> Tested-by:
-
Chris Park authored
[Why] uint32_t is implicitly converted to uint64_t while multiplication still happens on uint32_t side. This creates digit overflow for large pixel clock which is meant to be retained in uint64_t. [How] Calculate multiplication of units in uint64_t domain instead of uint32_t in DTO parameter clock caculation. Reviewed-by:
-
Sridevi Arvindekar authored
Scaling and rotation changes for cursor. Reviewed-by:
Ariel Bernstein <eric.bernstein@amd.com> Reviewed-by:
Nevenko Stupar <nevenko.stupar@amd.com> Acked-by:
-
Rodrigo Siqueira authored
Use the SPDX format for dmub_replay.c|.h files. Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by:
-
Ivan Lipski authored
[WHY] The coverity analysis flagged this if expression as it contains a 'CONSTANT_EXPRESSION_RESULT': 'update_idle_uclk' is 'ORd' with itself. [HOW] Removed the duplicate 'update_idle_uclk'. Reviewed-by:
-
George Shen authored
[Why] Passive DP40 cables were updated in the latest DP spec to support UHBR13.5 link rate. Current max link rate logic checks against the cable ID DPCD even for passive cables. [How] Ignore UHBR13.5 cable ID DPCD cap in get_max_link_rate logic. Reviewed-by:
George Shen <george.shen@amd.com> Tested-by:
-
Roman Li authored
[Why] replay_capability debugfs tells whether sink and driver support replay feature. However replay enablement also depends on whether it is enabled/disabled via amdgpu module params. [How] Add 'Config support' entry to output current replay config. Reviewed-by:
ChiaHsuan Chung <chiahsuan.chung@amd.com> Acked-by:
Roman Li <roman.li@amd.com> Tested-by:
-
Yang Wang authored
refine gfx7 firmware loading Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
winstang authored
[Why] prevent invalid memory access [How] check if dc and stream are NULL Co-authored-by:
winstang <winstang@amd.com> Reviewed-by:
-
Jay Cornwall authored
In commit fda812eb ("drm/amdkfd: gfx12 context save/restore trap handler fixes") the following fix was introduced but incorrectly restricted to gfx12. The same issue and a corresponding fix apply to gfx10 and gfx11. Do not overwrite TRAPSTS.{SAVECTX,HOST_TRAP} when restoring this register. Both of these fields can assert while the wavefront is running the trap handler. Signed-off-by:
Jay Cornwall <jay.cornwall@amd.com> Reviewed-by:
Lancelot Six <lancelot.six@amd.com> Acked-by:
-
Anthony Koo authored
- Change ordering of structs to put enums together - Add new define DMUB_TRACE_ENTRY_DEFINED to guard the trace code enum Acked-by:
-
Nicholas Kazlauskas authored
[Why] Adds support for performing the sequential ONO changes from DCN351 into DCN35 ASIC based on revision. [How] Check the revision and run the DCN351 sequences on applicable revisions. Reviewed-by:
Sung joon Kim <sungjoon.kim@amd.com> Acked-by:
-
Alvin Lee authored
[Description] Phantom DTBCLK can be calculated different from main because phantom has no DSC and thus will have a different output BPP. Ignore phantom DTBCLK requirement and only consider non-phantom DTBCLK requirements. Reviewed-by:
-
Michael Strauss authored
[WHY] Some sinks are observed to return invalid LTTPR revision and/or invalid LTTPR link rate capabilities. [HOW] Assume any LTTPR which reports invalid max link rate supports HBR3. Don't validate LTTPR DPCD revision in dp_is_lttpr_present check. Reviewed-by:
Michael Strauss <michael.strauss@amd.com> Tested-by:
-
