- 16 May, 2018 28 commits
-
-
Johan Hovold authored
commit c3a65808 upstream. Reimplement interface masking using device flags stored directly in the device-id table. This will make it easier to add and maintain device-id entries by using a more compact and readable notation compared to the current implementation (which manages pairs of masks in separate blacklist structs). Two convenience macros are used to flag an interface as either reserved or as not supporting modem-control requests: { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), .driver_info = NCTRL(0) | RSVD(3) }, For now, we limit the highest maskable interface number to seven, which allows for (up to 16) additional device flags to be added later should need arise. Note that this will likely need to be backported to stable in order to make future device-id backports more manageable. Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Alan Stern authored
commit fb5ee84e upstream. Some non-compliant high-speed USB devices have bulk endpoints with a 1024-byte maxpacket size. Although such endpoints don't work with xHCI host controllers, they do work with EHCI controllers. We used to accept these invalid sizes (with a warning), but we no longer do because of an unintentional change introduced by commit aed9d65a ("USB: validate wMaxPacketValue entries in endpoint descriptors"). This patch restores the old behavior, so that people with these peculiar devices can use them without patching their kernels by hand. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Suggested-by:
Elvinas <elvinas@veikia.lt> Fixes: aed9d65a ("USB: validate wMaxPacketValue entries in endpoint descriptors") CC: <stable@vger.kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 4842ed5b upstream. If we get an invalid device configuration from a palm 3 type device, we might incorrectly parse things, and we have the potential to crash in "interesting" ways. Fix this up by verifying the size of the configuration passed to us by the device, and only if it is correct, will we handle it. Note that this also fixes an information leak of slab data. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
-
Ben Hutchings authored
commit e5384092 upstream. Commit 65c79230 tried to clear the custom firmware path on exit by writing a single space to the firmware_class.path parameter. This doesn't work because nothing strips this space from the value stored and fw_get_filesystem_firmware() only ignores zero-length paths. Instead, write a null byte. Fixes: 0a8adf58 ("test: add firmware_class loader test") Fixes: 65c79230 ("test_firmware: fix setting old custom fw path back on exit") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by:
Luis R. Rodriguez <mcgrof@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Thomas Hellstrom authored
commit 13f149d4 upstream. A buffer object leak was introduced when fixing a premature buffer object release. Fix this. Cc: <stable@vger.kernel.org> Fixes: 73a88250 ("Fix a destoy-while-held mutex problem.") Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Deepak Rawat <drawat@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Danit Goldberg authored
commit 4f32ac2e upstream. Before the change, if the user passed a static rate value different than zero and the FW doesn't support static rate, it would end up configuring rate of 2.5 GBps. Fix this by using rate 0; unlimited, in cases where FW doesn't support static rate configuration. Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Danit Goldberg <danitg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
SZ Lin (林上智) authored
commit 9306b38e upstream. This patch adds support for PID 0x90b2 of ublox R410M. qmicli -d /dev/cdc-wdm0 --dms-get-manufacturer [/dev/cdc-wdm0] Device manufacturer retrieved: Manufacturer: 'u-blox' qmicli -d /dev/cdc-wdm0 --dms-get-model [/dev/cdc-wdm0] Device model retrieved: Model: 'SARA-R410M-02B' Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Leon Romanovsky authored
commit 002bf228 upstream. Ensure that user didn't supply values too large that can cause overflow. UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23 shift exponent -2147483648 is negative CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ubsan_epilogue+0xe/0x81 set_rq_size+0x7c2/0xa90 create_qp_common+0xc18/0x43c0 mlx5_ib_create_qp+0x379/0x1ca0 create_qp.isra.5+0xc94/0x2260 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0xc2c/0x1010 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 do_syscall_64+0x1aa/0x740 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x433569 RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569 RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003 RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8 R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000 R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006 Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <syzkaller@googlegroups.com> Reported-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
-
Roland Dreier authored
commit 09abfe7b upstream. The RDMA CM will select a source device and address by consulting the routing table if no source address is passed into rdma_resolve_address(). Userspace will ask for this by passing an all-zero source address in the RESOLVE_IP command. Unfortunately the new check for non-zero address size rejects this with EINVAL, which breaks valid userspace applications. Fix this by explicitly allowing a zero address family for the source. Fixes: 2975d5de ("RDMA/ucma: Check AF family prior resolving address") Cc: <stable@vger.kernel.org> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Darrick J. Wong authored
commit 7d83fb14 upstream. During the "insert range" fallocate operation, i_size grows by the specified 'len' bytes. XFS verifies that i_size + len < s_maxbytes, as it should. But this comparison is done using the signed 'loff_t', and 'i_size + len' can wrap around to a negative value, causing the check to incorrectly pass, resulting in an inode with "negative" i_size. This is possible on 64-bit platforms, where XFS sets s_maxbytes = LLONG_MAX. ext4 and f2fs don't run into this because they set a smaller s_maxbytes. Fix it by using subtraction instead. Reproducer: xfs_io -f file -c "truncate $(((1<<63)-1))" -c "finsert 0 4096" Fixes: a904b1ca ("xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate") Cc: <stable@vger.kernel.org> # v4.1+ Originally-From: Eric Biggers <ebiggers@google.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> [darrick: fix signed integer addition overflow too] Signed-off-by:
-
Vittorio Gambaletta (VittGam) authored
commit f372b811 upstream. This patch adds the correct platform data information for the Caroline Chromebook, so that the mouse button does not get stuck in pressed state after the first click. The Samus button keymap and platform data definition are the correct ones for Caroline, so they have been reused here. Signed-off-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by:
Salvatore Bellizzi <lkml@seppia.net> Tested-by:
Guenter Roeck <groeck@chromium.org> Cc: stable@vger.kernel.org [dtor: adjusted vendor spelling to match shipping firmware] Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 6bd6ae63 upstream. UI_SET_LEDBIT ioctl() causes the following KASAN splat when used with led > LED_CHARGING: [ 1274.663418] BUG: KASAN: slab-out-of-bounds in input_leds_connect+0x611/0x730 [input_leds] [ 1274.663426] Write of size 8 at addr ffff88003377b2c0 by task ckb-next-daemon/5128 This happens because we were writing to the led structure before making sure that it exists. Reported-by:
Tasos Sahanidis <tasos@tasossah.com> Tested-by:
-
Mathieu Desnoyers authored
commit d66a270b upstream. Tracepoint should only warn when a kernel API user does not respect the required preconditions (e.g. same tracepoint enabled twice, or called to remove a tracepoint that does not exist). Silence warning in out-of-memory conditions, given that the error is returned to the caller. This ensures that out-of-memory error-injection testing does not trigger warnings in tracepoint.c, which were seen by syzbot. Link: https://lkml.kernel.org/r/001a114465e241a8720567419a72@google.com Link: https://lkml.kernel.org/r/001a1140e0de15fc910567464190@google.com Link: http://lkml.kernel.org/r/20180315124424.32319-1-mathieu.desnoyers@efficios.com CC: Peter Zijlstra <peterz@infradead.org> CC: Jiri Olsa <jolsa@redhat.com> CC: Arnaldo Carvalho de Melo <acme@kernel.org> CC: Alexander Shishkin <alexander.shishkin@linux.intel.com> CC: Namhyung Kim <namhyung@kernel.org> CC: stable@vger.kernel.org Fixes: de7b2973 ("tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints") Reported-by: syzbot+9c0d616860575a73166a@syzkaller.appspotmail.com Reported-by: syzbot+4e9ae7fa46233396f64d@syzkaller.appspotmail.com Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Takashi Iwai authored
commit 76b3421b upstream. Some control API callbacks in aloop driver are too lazy to take the loopback->cable_lock and it results in possible races of cable access while it's being freed. It eventually lead to a UAF, as reported by fuzzer recently. This patch covers such control API callbacks and add the proper mutex locks. Reported-by:
DaeRyong Jeong <threeearcat@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Robert Rosengren authored
commit 306a4f3c upstream. Show paused ALSA aloop device as inactive, i.e. the control "PCM Slave Active" set as false. Notification sent upon state change. This makes it possible for client capturing from aloop device to know if data is expected. Without it the client expects data even if playback is paused. Signed-off-by:
Robert Rosengren <robert.rosengren@axis.com> Signed-off-by:
-
Takashi Iwai authored
commit 8f22e525 upstream. The sequencer virmidi code has an open race at its output trigger callback: namely, virmidi keeps only one event packet for processing while it doesn't protect for concurrent output trigger calls. snd_virmidi_output_trigger() tries to process the previously unfinished event before starting encoding the given MIDI stream, but this is done without any lock. Meanwhile, if another rawmidi stream starts the output trigger, this proceeds further, and overwrites the event package that is being processed in another thread. This eventually corrupts and may lead to the invalid memory access if the event type is like SYSEX. The fix is just to move the spinlock to cover both the pending event and the new stream. The bug was spotted by a new fuzzer, RaceFuzzer. BugLink: http://lkml.kernel.org/r/20180426045223.GA15307@dragonet.kaist.ac.krReported-by:
-
Takashi Iwai authored
commit f13876e2 upstream. Since snd_pcm_ioctl_xfern_compat() has no PCM state check, it may go further and hit the sanity check pcm_sanity_check() when the ioctl is called right after open. It may eventually spew a kernel warning, as triggered by syzbot, depending on kconfig. The lack of PCM state check there was just an oversight. Although it's no real crash, the spurious kernel warning is annoying, so let's add the proper check. Reported-by: syzbot+1dac3a4f6bc9c1c675d4@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kristian Evensen authored
commit 71a0483d upstream. The Quectel EP06 is a Cat. 6 LTE modem, and the interface mapping is as follows: 0: Diag 1: NMEA 2: AT 3: Modem Interface 4 is QMI and interface 5 is ADB, so they are blacklisted. This patch should also be considered for -stable. The QMI-patch for this modem is already in the -stable-queue. v1->v2: * Updated commit prefix (thanks Johan Hovold) * Updated commit message slightly. Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Acked-by:
-
Markus Pargmann authored
commit bd2e778c upstream. ECC is only calculated for written pages. As erased pages are not actively written the ECC is always invalid. For this purpose the Hardware BCH unit is able to check for erased pages and does not raise an ECC error in this case. This behaviour can be influenced using the BCH_MODE register which sets the number of allowed bitflips in an erased page. Unfortunately the unit is not capable of fixing the bitflips in memory. To avoid complete software checks for erased pages, we can simply check buffers with uncorrectable ECC errors because we know that any erased page with errors is uncorrectable by the BCH unit. This patch adds the generic nand_check_erased_ecc_chunk() to gpmi-nand to correct erased pages. To have the valid data in the buffer before using them, this patch moves the read_page_swap_end() call before the ECC status checking for-loop. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> [Squashed patches by Stefan and Boris to check ECC area] Tested-by:
Stefan Christ <s.christ@phytec.de> Acked-by:
Han xu <han.xu@nxp.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
commit 7eccb738 upstream. Rx data frames notified through HTT_T2H_MSG_TYPE_RX_IND and HTT_T2H_MSG_TYPE_RX_FRAG_IND expect PN/TSC check to be done on host (mac80211) rather than firmware. Rebuild cipher header in every received data frames (that are notified through those HTT interfaces) from the rx_hdr_status tlv available in the rx descriptor of the first msdu. Skip setting RX_FLAG_IV_STRIPPED flag for the packets which requires mac80211 PN/TSC check support and set appropriate RX_FLAG for stripped crypto tail. Hw QCA988X, QCA9887, QCA99X0, QCA9984, QCA9888 and QCA4019 currently need the rebuilding of cipher header to perform PN/TSC check for replay attack. Please note that removing crypto tail for CCMP-256, GCMP and GCMP-256 ciphers in raw mode needs to be fixed. Since Rx with these ciphers in raw mode does not work in the current form even without this patch and removing crypto tail for these chipers needs clean up, raw mode related issues in CCMP-256, GCMP and GCMP-256 can be addressed in follow up patches. Tested-by:
Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by:
Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
Sriram R <srirrama@codeaurora.org> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
commit 2f38c3c0 upstream. Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future) rx_hdr_status is not padded to align in 4-byte boundary. Define a new hw_params field to handle different alignment behaviour between different hw. This patch fixes improper retrieval of rfc1042 header with QCA4019. This patch along with "ath10k: Properly remove padding from the start of rx payload" will fix traffic failure in ethernet decap mode for QCA4019. Signed-off-by:
-
David Spinadel authored
commit cef0acd4 upstream. Add a flag that indicates that the WEP ICV was stripped from an RX packet, allowing the device to not transfer that if it's already checked. Signed-off-by:
David Spinadel <david.spinadel@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Cc: Sriram R <srirrama@codeaurora.org> Signed-off-by:
-
Sara Sharon authored
commit f631a77b upstream. Some hardware (iwlwifi an example) de-aggregate AMSDUs and copy the IV as is to the generated MPDUs, so the same PN appears in multiple packets without being a replay attack. Allow driver to explicitly indicate that a frame is allowed to have the same PN as the previous frame. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Sara Sharon authored
commit f980ebc0 upstream. When HW crypto is used, there's no need for the CCMP/GCMP MIC to be available to mac80211, and the hardware might have removed it already after checking. The MIC is also useless to have when the frame is already decrypted, so allow indicating that it's not present. Since we are running out of bits in mac80211_rx_flags, make the flags field a u64. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Tejun Heo authored
commit 71546d10 upstream. microblaze build broke due to missing declaration of the cond_resched() invocation added recently. Let's include linux/sched.h explicitly. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Alexander Yarygin authored
commit ed8dda0b upstream. Some facility bits are in a range that is defined to be "ok for guests without any necessary hypervisor changes". Enable those bits. Signed-off-by:
Alexander Yarygin <yarygin@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Teng Qin authored
commit 8fe45924 upstream. When iterating through a map, we need to find a key that does not exist in the map so map_get_next_key will give us the first key of the map. This often requires a lot of guessing in production systems. This patch makes map_get_next_key return the first key when the key pointer in the parameter is NULL. Signed-off-by:
Teng Qin <qinteng@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Chenbo Feng <fengc@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
Tan Xiaojun authored
commit 1572e45a upstream. Use "proc_dointvec_minmax" instead of "proc_dointvec" to check the input value from user-space. If not, we can set a big value and some vars will overflow like "sysctl_perf_event_sample_rate" which will cause a lot of unexpected problems. Signed-off-by:
Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <acme@kernel.org> Cc: <alexander.shishkin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1487829879-56237-1-git-send-email-tanxiaojun@huawei.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
- 02 May, 2018 12 commits
-
-
Greg Kroah-Hartman authored
-
Romain Izard authored
commit 82a3f87f upstream. As the mctrl_gpio driver can be built as a module, it needs to have its license specified with MODULE_LICENSE. Otherwise, it cannot access required symbols exported through EXPORT_SYMBOL_GPL. Signed-off-by:
Romain Izard <romain.izard.pro@gmail.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
commit 4f71a2e0 upstream. To be able to make use of the mctrl-gpio helper from a module these functions must be exported. This was forgotten in the commit introducing support interrupt handling for these functions (while it was done for mctrl_gpio_enable_ms, *sigh*). Fixes: ce59e48f ("serial: mctrl_gpio: implement interrupt handling") Signed-off-by:
-
Yazen Ghannam authored
commit da6fa7ef upstream. Recent AMD systems support using MWAIT for C1 state. However, MWAIT will not allow deeper cstates than C1 on current systems. play_dead() expects to use the deepest state available. The deepest state available on AMD systems is reached through SystemIO or HALT. If MWAIT is available, it is preferred over the other methods, so the CPU never reaches the deepest possible state. Don't try to use MWAIT to play_dead() on AMD systems. Instead, use CPUIDLE to enter the deepest state advertised by firmware. If CPUIDLE is not available then fallback to HALT. Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Cc: Yazen Ghannam <Yazen.Ghannam@amd.com> Link: https://lkml.kernel.org/r/20180403140228.58540-1-Yazen.Ghannam@amd.comSigned-off-by:
-
Arnd Bergmann authored
commit 1a512c08 upstream. A bugfix broke the x32 shmid64_ds and msqid64_ds data structure layout (as seen from user space) a few years ago: Originally, __BITS_PER_LONG was defined as 64 on x32, so we did not have padding after the 64-bit __kernel_time_t fields, After __BITS_PER_LONG got changed to 32, applications would observe extra padding. In other parts of the uapi headers we seem to have a mix of those expecting either 32 or 64 on x32 applications, so we can't easily revert the path that broke these two structures. Instead, this patch decouples x32 from the other architectures and moves it back into arch specific headers, partially reverting the even older commit 73a2d096 ("x86: remove all now-duplicate header files"). It's not clear whether this ever made any difference, since at least glibc carries its own (correct) copy of both of these header files, so possibly no application has ever observed the definitions here. Based on a suggestion from H.J. Lu, I tried out the tool from https://github.com/hjl-tools/linux-header to find other such bugs, which pointed out the same bug in statfs(), which also has a separate (correct) copy in glibc. Fixes: f4b4aae1 ("x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Ilya Dryomov authored
commit 9c55ad1c upstream. ceph_con_workfn() validates con->state before calling try_read() and then try_write(). However, try_read() temporarily releases con->mutex, notably in process_message() and ceph_con_in_msg_alloc(), opening the window for ceph_con_close() to sneak in, close the connection and release con->sock. When try_write() is called on the assumption that con->state is still valid (i.e. not STANDBY or CLOSED), a NULL sock gets passed to the networking stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: selinux_socket_sendmsg+0x5/0x20 Make sure con->state is valid at the top of try_write() and add an explicit BUG_ON for this, similar to try_read(). Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/23706Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jason Dillaman <dillaman@redhat.com> Signed-off-by:
-
Nicolin Chen authored
commit c656941d upstream. When the desired ratio is less than 256, the savesub (tolerance) in the calculation would become 0. This will then fail the loop- search immediately without reporting any errors. But if the ratio is smaller enough, there is no need to calculate the tolerance because PM divisor alone is enough to get the ratio. So a simple fix could be just to set PM directly instead of going into the loop-search. Reported-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Tested-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Geert Uytterhoeven authored
commit d2ffed51 upstream. When printing the driver_override parameter when it is 4095 and 4094 bytes long, the printing code would access invalid memory because we need count + 1 bytes for printing. Cfr. commits 4efe874a ("PCI: Don't read past the end of sysfs "driver_override" buffer") and bf563b01 ("driver core: platform: Don't read past the end of "driver_override" buffer"). Fixes: 3cf38571 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
commit 6a7228d9 upstream. The driver_override implementation is susceptible to a race condition when different threads are reading vs storing a different driver override. Add locking to avoid this race condition. Cfr. commits 62655397 ("driver core: platform: fix race condition with driver_override") and 9561475d ("PCI: Fix race condition with driver_override"). Fixes: 3cf38571 ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by:
-
Geert Uytterhoeven authored
commit 5f536246 upstream. For AMBA devices with unconfigured driver override, the "driver_override" sysfs virtual file is empty, while it contains "(null)" for platform and PCI devices. Make AMBA consistent with other buses by dropping the test for a NULL pointer. Note that contrary to popular belief, sprintf() handles NULL pointers fine; they are printed as "(null)". Signed-off-by:
-
Mahesh Rajashekhara authored
commit 505aa4b6 upstream. A drive being sanitized will return NOT READY / ASC 0x4 / ASCQ 0x1b ("LOGICAL UNIT NOT READY. SANITIZE IN PROGRESS"). Prevent spinning up the drive until this condition clears. [mkp: tweaked commit message] Signed-off-by:
Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dmitry Vyukov authored
commit 3e14c6ab upstream. This WARNING proved to be noisy. The function still returns an error and callers should handle it. That's how most of kernel code works. Downgrade the WARNING to pr_err() and leave WARNINGs for kernel bugs. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by: syzbot+209c0f67f99fec8eb14b@syzkaller.appspotmail.com Reported-by: syzbot+7fb6d9525a4528104e05@syzkaller.appspotmail.com Reported-by: syzbot+2e63711063e2d8f9ea27@syzkaller.appspotmail.com Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
