- 02 Apr, 2024 4 commits
-
-
Zhang Yi authored
We removed the configuration of ES8326_ADC_SCALE in es8326_jack_detect_handler because user changed the configuration by snd_controls Signed-off-by:
Zhang Yi <zhangyi@everest-semi.com> Link: https://msgid.link/r/20240402062043.20608-5-zhangyi@everest-semi.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Zhang Yi authored
We got a headphone detection issue after suspend and resume. And we fixed it by modifying the configuration at es8326_suspend and invoke es8326_irq at es8326_resume. Signed-off-by:
-
Zhang Yi authored
We got a digital microphone feature issue. And we fixed it by modifying the clock table. Also, we changed the marco ES8326_CLK_ON declaration Signed-off-by:
-
Zhang Yi authored
We got an error report about headphone type detection and button detection. We fixed the headphone type detection error by adjusting the debounce timer configuration. And we fixed the button detection error by disabling the button detection feature when the headphone are unplugged and enabling it when headphone are plugged in. Signed-off-by:
-
- 29 Mar, 2024 2 commits
-
-
Vijendar Mukunda authored
If acp_init() fails, acp pci driver probe should return error. Add acp_init() function return value check logic. Fixes: e61b4155 ("ASoC: amd: acp: refactor the acp init and de-init sequence") Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20240329053815.2373979-1-Vijendar.Mukunda@amd.comSigned-off-by:
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Fix a set of problematic locking sequences and update error messages, tested on SOF/SoundWire platforms.
-
- 28 Mar, 2024 7 commits
-
-
Stephen Lee authored
In snd_soc_info_volsw(), mask is generated by figuring out the index of the most significant bit set in max and converting the index to a bitmask through bit shift 1. Unintended wraparound occurs when max is an integer value with msb bit set. Since the bit shift value 1 is treated as an integer type, the left shift operation will wraparound and set mask to 0 instead of all 1's. In order to fix this, we type cast 1 as `1ULL` to prevent the wraparound. Fixes: 7077148f ("ASoC: core: Split ops out of soc-core.c") Signed-off-by:
Stephen Lee <slee08177@gmail.com> Link: https://msgid.link/r/20240326010131.6211-1-slee08177@gmail.comSigned-off-by:
-
Pierre-Louis Bossart authored
The drivers for Realtek SoundWire codecs use similar logs, which is problematic to analyze problems reported by CI tools, e.g. "Failed to get private value: 752001 => 0000 ret=-5". It's not uncommon to have several Realtek devices on the same platform, having the same log thrown makes support difficult. This patch adds __func__ to all error logs which didn't already include it. No functionality change, only error logs are modified. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://msgid.link/r/20240325221817.206465-7-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
The disable_irq_lock protects the 'disable_irq' value, we need to lock before testing it. Fixes: a0b7c59a ("ASoC: rt722-sdca: fix for JD event handling in ClockStop Mode0") Signed-off-by:
Chao Song <chao.song@linux.intel.com> Link: https://msgid.link/r/20240325221817.206465-6-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
The disable_irq_lock protects the 'disable_irq' value, we need to lock before testing it. Fixes: 7a8735c1 ("ASoC: rt712-sdca: fix for JD event handling in ClockStop Mode0") Signed-off-by:
-
Pierre-Louis Bossart authored
The disable_irq_lock protects the 'disable_irq' value, we need to lock before testing it. Fixes: b69de265 ("ASoC: rt711: fix for JD event handling in ClockStop Mode0") Signed-off-by:
-
Pierre-Louis Bossart authored
The disable_irq_lock protects the 'disable_irq' value, we need to lock before testing it. Fixes: 23adeb70 ("ASoC: rt711-sdca: fix for JD event handling in ClockStop Mode0") Signed-off-by:
-
Pierre-Louis Bossart authored
The disable_irq_lock protects the 'disable_irq' value, we need to lock before testing it. Fixes: 02fb23d7 ("ASoC: rt5682-sdw: fix for JD event handling in ClockStop Mode0") Signed-off-by:
-
- 27 Mar, 2024 1 commit
-
-
Vijendar Mukunda authored
ACP PDM configuration has to be verified for all combinations. Remove FLAG_AMD_LEGACY_ONLY_DMIC check. Fixes: 3a94c8ad ("ASoC: amd: acp: add code for scanning acp pdm controller") Signed-off-by:
-
- 26 Mar, 2024 2 commits
-
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: The current version of delay reporting code can report incorrect values when paired with a firmware which enables this feature. Unfortunately there are several smaller issues that needed to be addressed to correct the behavior: Wrong information was used for the host side of counter For MTL/LNL used incorrect (in a sense that it was verified only on MTL) link side counter function. The link side counter needs compensation logic if pause/resume is used. The offset values were not refreshed from firmware. Finally, not strictly connected, but the ALSA buffer size needs to be constrained to avoid constant xrun from media players (like mpv) The series applies cleanly for 6.9 and 6.8.y stable, but older stable would need manual backport, but it is questionable if it is needed as MTL/LNL is missing features.
-
Charles Keepax authored
The current code is pulling the wrong pointer causing it to disable the wrong IRQ. Correct the code to pull the correct cs42l43 core data pointer. Fixes: 64353af4 ("ASoC: cs42l43: Add system suspend ops to disable IRQ") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://msgid.link/r/20240326105434.852907-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
- 25 Mar, 2024 20 commits
-
-
Rander Wang authored
The original timestamp is built base on windows epoch time which is not fit for Linux system and difficult to be used for kernel debugging. This patch adopts syslog timestamp so that we can simply use dmesg to check the timestamp between fw and kernel. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
-
Simon Trimmer authored
When a wmfw file has not been loaded the firmware control descriptions necessary to write a stored calibration are not present. In this case print a more descriptive error message. The message is logged at info level because it is not fatal, and does not necessarily imply that anything is broken. Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240325144450.293630-1-rf@opensource.cirrus.comSigned-off-by:
-
Peter Ujfalusi authored
SoCs with ACE architecture are tailored to use s2idle instead deep (S3) suspend state and the IMR content is lost when the system is forced to enter even to S3. When waking up from S3 state the IMR boot will fail as the content is lost. Set the skip_imr_boot flag to make sure that we don't try IMR in this case. Signed-off-by:
Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://msgid.link/r/20240322112504.4192-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Peter Ujfalusi authored
During pause/reset or stop/start the LLP counter is not reset, which will result broken delay reporting. Read the LLP value on STOP/PAUSE trigger and use it in LLP reading to normalize the LLP from the register. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
The pplcllpl/u can be used to save the Link Connection Linear Link Position register value to be used for compensation of the LLP register value in case the counter is not reset (after pause/resume or stop/start without closing the stream). The LLP can be used along with PPHCLDP to calculate delay caused by the DSP processing for HDA links. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
This patch improves the delay calculation by relying on the LLP (Linear Link Position) on the DAI side and the LDP (Linear Data Pointer) on the host side. The LDP provides the same DMA position as LPIB, but with a linear count instead of a position in the ALSA ring buffer. The LDP values are provided in bytes and must be converted to frames. The difference in units means that the host counter will wrap earlier than the LLP. We need to wrap the LLP at the same boundary as the host counter. The ASoC framework relies on separate pointer and delay callback. Measurement errors can be reduced by processing all the counter values in the pointer callback. The delay value is stored, and will be reported to higher levels in the delay callback. For playback, the firmware provides a stream_start offset to handle mixing/pause usages, where the DAI might have started earlier than the PCM device. The delay calculation must be special-cased when the link counter has not reached the start offset value, i.e. no valid audio has left the DSP. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
The IPC specific pointer callback can be used when additional or custom handling is needed during the pointer calculation, like executing a delay calculation at the same time to minimize drift between the reported pointer and the calculated delay. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
When the final state is SOF_IPC4_PIPE_PAUSED, it is possible that the stream will be restarted (resume or start) in which case we need to update the offset from the firmware. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
The SNDRV_PCM_TRIGGER_PAUSE_PUSH does not need to be a separate case, it can be handled along with STOP and SUSPEND Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
The sof_ipc4_timestamp_info is only used by ipc4-pcm.c internally, it should not be in a generic header implying that it might be used elsewhere. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
The get_stream_position has been replaced by get_dai_frame_counter and all related code can be dropped form the core. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
The get_stream_position has been replaced by get_dai_frame_counter, it should not be set to allow it to be dropped from core code. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
Switch to the new callback to retrieve the DAI (link) frame counter. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
Add implementation for reading the LDP (Linear DMA Position) to be used as get_host_byte_counter(). The LDP is counting the number of bytes moved between the DSP and host memory. Set the get_dai_frame_counter to hda_dsp_get_stream_llp, which is counting the frames on the link side of the DSP. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
For delay calculation we need two information: Number of bytes transferred between the DSP and host memory (ALSA buffer) Number of frames transferred between the DSP and external device (link/codec/DMIC/etc). The reason for the different units (bytes vs frames) on host and dai side is that the format on the dai side is decided by the firmware and might not be the same as on the host side, thus the expectation is that the counter reflects the number of frames. The kernel know the host side format and in there we have access to the DMA position which is in bytes. In a simplified way, the DSP caused delay is the difference between the two counters. The existing get_stream_position callback is defined to retrieve the frame counter on the DAI side but it's name is too generic to be intuitive and makes it hard to define a callback for the host side. This patch introduces a new set of callbacks to replace the get_stream_position and define the host side equivalent: get_dai_frame_counter get_host_byte_counter Subsequent patches will remove the old callback. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
Drop the MTL mtl_dsp_get_stream_hda_link_position() function and related defines since it can only work on platforms which have 19 streams because of the use of 0x948 as base offset for the LLP registers. The generic hda_dsp_get_stream_hda_link_position() takes the number of streams into consideration when reading the LLP registers for the stream and can handle different HDA configurations. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
When the Linear Link Position is not available in firmware SRAM window we use the host accessible position registers to read it. The address of the PPLCLLPL/U registers depend on the number of streams (playback+capture). At probe time the pplc_addr is calculated for each stream and we can use it to read the LLP without the need of address re-calculation. Set the get_stream_position callback in sof_hda_common_ops for all platforms: The callback is used for IPC4 delay calculations only but the register is a generic HDA register, not tied to any specific IPC version. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
If the PCM have the dsp_max_burst_size_in_ms set then place a constraint to limit the minimum buffer time to avoid xruns caused by DMA bursts spinning on the ALSA buffer. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
When setting up the pcm widget, save the DSP buffer size (in ms) for platform code to place a constraint on playback. On playback the DMA will fill the buffer on start and if the period size is smaller it will immediately overrun. On capture the DMA will move data in 1ms bursts. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
Peter Ujfalusi authored
The dsp_max_burst_size_in_ms can be used to save the length of the maximum burst size in ms the host DMA will use. Platform code can place constraint using this to avoid user space requesting too small ALSA buffer which will result xruns. Cc: stable@vger.kernel.org # 6.8 Signed-off-by:
-
- 24 Mar, 2024 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: - Fix logic that is supposed to prevent placement of the kernel image below LOAD_PHYSICAL_ADDR - Use the firmware stack in the EFI stub when running in mixed mode - Clear BSS only once when using mixed mode - Check efi.get_variable() function pointer for NULL before trying to call it * tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: fix panic in kdump kernel x86/efistub: Don't clear BSS twice in mixed mode x86/efistub: Call mixed mode boot services on the firmware's stack efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - Ensure that the encryption mask at boot is properly propagated on 5-level page tables, otherwise the PGD entry is incorrectly set to non-encrypted, which causes system crashes during boot. - Undo the deferred 5-level page table setup as it cannot work with memory encryption enabled. - Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset to the default value but the cached variable is not, so subsequent comparisons might yield the wrong result and as a consequence the result prevents updating the MSR. - Register the local APIC address only once in the MPPARSE enumeration to prevent triggering the related WARN_ONs() in the APIC and topology code. - Handle the case where no APIC is found gracefully by registering a fake APIC in the topology code. That makes all related topology functions work correctly and does not affect the actual APIC driver code at all. - Don't evaluate logical IDs during early boot as the local APIC IDs are not yet enumerated and the invoked function returns an error code. Nothing requires the logical IDs before the final CPUID enumeration takes place, which happens after the enumeration. - Cure the fallout of the per CPU rework on UP which misplaced the copying of boot_cpu_data to per CPU data so that the final update to boot_cpu_data got lost which caused inconsistent state and boot crashes. - Use copy_from_kernel_nofault() in the kprobes setup as there is no guarantee that the address can be safely accessed. - Reorder struct members in struct saved_context to work around another kmemleak false positive - Remove the buggy code which tries to update the E820 kexec table for setup_data as that is never passed to the kexec kernel. - Update the resource control documentation to use the proper units. - Fix a Kconfig warning observed with tinyconfig * tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/64: Move 5-level paging global variable assignments back x86/boot/64: Apply encryption mask to 5-level pagetable update x86/cpu: Add model number for another Intel Arrow Lake mobile processor x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Documentation/x86: Document that resctrl bandwidth control units are MiB x86/mpparse: Register APIC address only once x86/topology: Handle the !APIC case gracefully x86/topology: Don't evaluate logical IDs during early boot x86/cpu: Ensure that CPU info updates are propagated on UP kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address x86/pm: Work around false positive kmemleak report in msr_build_context() x86/kexec: Do not update E820 kexec table for setup_data x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler doc clarification from Thomas Gleixner: "A single update for the documentation of the base_slice_ns tunable to clarify that any value which is less than the tick slice has no effect because the scheduler tick is not guaranteed to happen within the set time slice" * tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/doc: Update documentation for base_slice_ns and CONFIG_HZ relation
-
