We must return negative error code -ENOMEM if function
'usb_otg_descriptor_alloc()' fails.
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Link: https://lore.kernel.org/r/20230621124323.47183-1-harperchen1110@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The FSA4480 Type-C switch supports switching the Audio R/L,
AGND and MIC signals to the USB-C DP/DM and SBU1/2 to support
the Audio Accessory Mode.

The FSA4480 has an integrated Audio jack detection mechanism
to automatically mux the AGND, MIX and Sense to the correct
SBU lines to support 3 pole and both 4 pole TRRS pinouts.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-sm8550-upstream-type-c-audio-v1-3-15a92565146b@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In order to handle the Audio Accessory mode, refactor the mux
and switch setup in a single function.

The refactor will help add new states and make the process
simpler to understand.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-sm8550-upstream-type-c-audio-v1-2-15a92565146b@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for calling typec_set_mode() for the DEBUG, AUDIO
accessory modes.

Let's also call typec_set_mode() for USB as default and SAFE
when partner is disconnected.

The USB state is only called when ALT mode is specifically
not specified by the partner status flags in order
to leave the altmode handlers setup the proper mode to
switches, muxes and retimers.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-sm8550-upstream-type-c-audio-v1-1-15a92565146b@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'thunderbolt-for-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next

Mika writes:

thunderbolt: Changes for v6.5 merge window

This includes following Thunderbolt/USB4 changes for the v6.5 merge
window:

  - Improve debug logging
  - Rework for TMU and CL states handling
  - Retimer access improvements
  - Initial support for USB4 v2 features:

    * 80G symmetric link support
    * New notifications
    * PCIe extended encapsulation
    * enhanced uni-directional TMU mode
    * CL2 link low power state
    * DisplayPort 2.x tunneling

  - Support for Intel Barlow Ridge Thunderbolt/USB4 controller
  - Minor fixes and improvements.

All these have been in linux-next with no reported issues.

* tag 'thunderbolt-for-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (55 commits)
  thunderbolt: Add test case for 3 DisplayPort tunnels
  thunderbolt: Add DisplayPort 2.x tunneling support
  thunderbolt: Make bandwidth allocation mode function names consistent
  thunderbolt: Enable CL2 low power state
  thunderbolt: Add support for enhanced uni-directional TMU mode
  thunderbolt: Increase NVM_MAX_SIZE to support Intel Barlow Ridge controller
  thunderbolt: Move constants related to NVM into nvm.c
  thunderbolt: Limit Intel Barlow Ridge USB3 bandwidth
  thunderbolt: Add Intel Barlow Ridge PCI ID
  thunderbolt: Fix PCIe adapter capability length for USB4 v2 routers
  thunderbolt: Fix DisplayPort IN adapter capability length for USB4 v2 routers
  thunderbolt: Add two additional double words for adapters TMU for USB4 v2 routers
  thunderbolt: Enable USB4 v2 PCIe TLP/DLLP extended encapsulation
  thunderbolt: Announce USB4 v2 connection manager support
  thunderbolt: Reset USB4 v2 host router
  thunderbolt: Add the new USB4 v2 notification types
  thunderbolt: Add support for USB4 v2 80 Gb/s link
  thunderbolt: Identify USB4 v2 routers
  thunderbolt: Do not touch lane 1 adapter path config space
  thunderbolt: Ignore data CRC mismatch for USB4 routers
  ...

Now that the driver core allows for struct class to be in read-only
memory, move the hidg_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620094412.508580-11-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the driver core allows for struct class to be in read-only
memory, move the usb_gadget_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620094412.508580-10-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the driver core allows for struct class to be in read-only
memory, move the mon_bin_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620094412.508580-9-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the driver core allows for struct class to be in read-only
memory, move the udc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620094412.508580-8-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the driver core allows for struct class to be in read-only
memory, move the role_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620094412.508580-7-gregkh@linuxfoundation.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The hibernation feature enabled for Xilinx Versal NET SoC in DWC3 IP.
As the DWC3 IP supports the hibernation feature, to handle the wakeup
or hibernation interrupt, add host mode "wakeup" interrupt-names
optional property in the binding schema to capture remote-wakeup and
connect/ disconnect event in the hibernation state and increased maxItems
to 4 for the interrupts and interrupt-names property.

We have a dedicated IRQ line specifically for the hibernation feature.
When the "wakeup" IRQ line is triggered, it initiates a hibernation
interrupt, causing the system to wake up from the hibernation state.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230619105032.2888128-1-piyush.mehta@amd.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

StarFive JH7110 platforms USB have a wrapper module around
the Cadence USBSS-DRD controller. Add binding information doc
for that.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230518112750.57924-6-minda.chen@starfivetech.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* Document the IPQ9574 dwc3 compatible.

* Make power-domains as optional since IPQ9574 doesn't have GDSCs
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/27fc578e549e12a4d689cdd434107964b529c4f4.1686289721.git.quic_varada@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a spelling mistake in a trace message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20230615144052.2254528-1-colin.i.king@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().

Direct replacement is safe here since return value of -errno
is used to check for truncation instead of PAGE_SIZE.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Link: https://lore.kernel.org/r/20230615180318.400639-1-azeemshaikh38@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Traverse fixed pdos to calculate the maximum power that the charger
can provide, and it can be get by POWER_SUPPLY_PROP_INPUT_POWER_LIMIT
property.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230616075241.27690-2-frank.wang@rock-chips.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the current implementation, the tcpm set CC1/CC2 role to open when
it do port reset would cause the VBUS removed by the Type-C partner.

This sets CC1/CC2 according to the default state of port to fix it.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230616075241.27690-1-frank.wang@rock-chips.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Intel Barlow Ridge Thunderbolt controller has 3 DP IN adapters. This
allows 3 simultaneus DisplayPort tunnels through either one or two USB4
downstream ports (in any possible configuration). Add test case for
this.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

This adds support for the UHBR (Ultra High Bit Rate) bandwidths
introduced with DisplayPort 2.0 (and refined in 2.1). These can go up to
80 Gbit/s and their support is represent in additional bits in the DP IN
capability.

This updates the DisplayPort tunneling to support these new rates too.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Make sure the DisplayPort bandwidth allocation mode function names are
consistent with the existing ones, such as USB3.

No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

For USB4 v2 routers we can also enable CL2 which allows better power
savings and thermal management than CL0s and CL1.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

This is new TMU mode introduced with the USB4 v2. This mode is simpler
than the existing ones and allows all CL states as well. Enable this for
all links where both side routers are v2 and keep the existing
functionality for the v1 and earlier links.

Currently only support the MedRes rate. We can add the HiFi rate later
too if it turns out to be useful.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Intel Barlow Ridge discrete USB4 controller has larger NOR Flash, hence
increase NVM_MAX_SIZE to support it.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Move constants related to NVM into nvm.c to make the code cleaner. Use a
separate constant for USB4_DATA_DWORDS in usb4.c.

No functional changes.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Intel Barlow Ridge discrete USB4 host router has the same limitation as
the previous generations so make sure the USB3 bandwidth limitation
quirk is applied to Barlow Ridge too.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Intel Barlow Ridge is the first USB4 v2 controller from Intel. The
controller exposes standard USB4 PCI class ID in typical configurations,
however there is a way to configure it so that it uses a special class
ID to allow using s different driver than the Windows inbox one. For
this reason add the Barlow Ridge PCI ID to the Linux driver too so that
the driver can attach regardless of the class ID.
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

For USB4 v2 routers, the PCIe adapter capability length is longer.
Display the correct capability length in the debugfs register dump.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

For USB4 v2 routers, the DisplayPort IN adapter capability length is
longer. Display the correct capability length in the debugfs register
dump.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

For USB4 v2 routers, the adapters's TMU capability has two additional
double words. Include them in the debugfs register dump.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

USB4 v2 spec introduces modified encapsulation of PCIe TLP and DLLP
packets. This improves the PCIe tunneled traffic usage by reducing
overhead. Enable this if both sides of the link support it.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Program the CMUV (Connection Manager USB4 Version) field for USB4 v2 and
v1 routers according to the spec.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

USB4 v2 added a bit that can be used to reset the host router so we use
this to trigger reset when the driver probes. This will reset the
already connected topology as well but doing this simplifies things a
lot if for instance the link is already set to asymmetric. We also add
a module parameter to prevent this in case of problems.

While there rename the REG_HOP_COUNT to REG_CAPS to match the USB4 spec
naming better.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

USB4 v2 spec adds a bunch of new notifications that the connection
manager can use instead of polling. While we do not use these yet we
need to ack the ones routers expect to be acked.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

USB4 v2 bumps the per-lane speed up to 40 Gb/s. Also the lanes are
always bonded which gives 80 Gb/s symmetric link (and 120/40 Gb/s
asymmetric). This updates the speed and width of routers and XDomain
connections to support the Gen 4 link. For now we keep the link as is
even if it is already asymmetric.

While there make tb_port_set_link_width() static.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Add a new function usb4_switch_version() that can be used to figure out
the spec version of the router and make tb_switch_is_usb4() to use it as
well. Update the uevent accordingly.
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

It is not required to be implemented at all because USB4 does not use
lane 1 for tunneling except when aggregated with lane 0. For this reason
do not try to read the path config space of USB4 lane 1 adapters.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

This is also something not always updated after the DROM contents itself
so issue warning but continue parsing it as we do for pre-USB4 DROMs
too.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Add support for the ON Semiconductor NB7VPQ904M Type-C USB SuperSpeed
and DisplayPort ALT Mode Linear Redriver chip found on some devices
with a Type-C port.

The redriver compensates ultra High-Speeed DisplayPort and USB
Super Speed signal integrity losses mainly due to PCB & transmission
cables.

The redriver doesn't support SuperSpeed lines swapping, but
can support Type-C SBU lines swapping.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Message-ID: <20230601-topic-sm8x50-upstream-redriver-v4-2-91d5820f3a03@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For some reason the include/uapi/linux/usb/ directory is missing in the
USB SUBSYSTEM entry, so get_maintainer will not know to cc: the proper
mailing lists.  Fix this up by adding an entry for this directory.

Message-ID: <20230615094306.2072827-2-gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the binding to DT schema format. It also updates the
reset-controller description.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20230613123048.2935502-1-piyush.mehta@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>