- 19 Nov, 2004 40 commits
-
-
Haroldo Gamal authored
The patches attached here fixes the BUG #3758 - "Broken symlinks on smbfs with 2.6.10-rc[12]". There are two patches, one to be applied over version 2.6.9 and the other over 2.6.10-rc2. The old utilities (and the old driver) uses uid=0, gid=0, dmask=0 and fmask=0 to flag the lack of this parameters on the mount command line. When the user do not specify the uid, gid, fmask or dmask, the current driver will assign gid=root, gid=root, dmask=755, fmask=755. This behavior is similar to the old 2.x samba versions. To make the driver see the permissions and ownership assigned on the server, "smbmount" and "smbmnt" utilities must be patched. The patches is already available on the attached patches at Bug #3330 or Samba Bug #999. Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Roland Dreier authored
<linux/mount.h> uses atomic_t and spinlock_t, but doesn't include either <asm/atomic.h> or <linux/spinlock.h>, which means that any users of <linux/mount.h> have to include them. This patch adds the necessary #includes to avoid this. Signed-off-by:
Roland Dreier <roland@topspin.com> Signed-off-by:
-
Adrian Bunk authored
There's not much value in shipping Changelogs that weren't updated since at least 2.4.0. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Andrew Morton authored
Acked-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Magnus Damm authored
The kernel parameter "nohighio" seems to be gone in the code, but the parameter is still left in the documentation. Signed-off-by:
-
Neil Brown authored
Problem identified by Jan Kasprzak. Limit on domainname_max (currently 50) is too small. Just use the beginning of input buffer as scratch space for it, and save a little stack space while we're at it. Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
Daniel Drake authored
This patch adds LOG_SENSE as a read-ok command. cdrecord-prodvd uses this. I also added LOG_SELECT as write-ok as this seems to fit in as well. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Acked-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Prasanna Meda authored
Looking at get_task_comm patch: http://linus.bkbits.net:8080/linux-2.5/patch@1.1803.144.3 There is one other place where task->comm is accessed outside current. There are two issues. The code is trying to copy to temp space without task_lock. It is not using temp space for actual user copy. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Colin Leroy authored
This patch replaces MODULE_PARM to module_param for adt746x. Signed-off-by:
Colin Leroy <colin@colino.net> Signed-off-by:
-
Oleg Nesterov authored
Uninlining do_trap() saves 544 bytes in traps.o. get_cr2() seems to be unused, remove it. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Stelian Pop authored
The sonypi_camera_command() used to fail without returning an error code if the user fergot to enable the camera in the sonypi module (using the camera=1 module parameter). This caused the meye driver to apparently load correctly but miserably fail later, when trying to access the camera for getting some data out of it. This patch adds an error code to sonypi_camera_command() and makes the meye driver check for it in the PCI probe routine. If the function fails, a message is printed in the kernel logs reminding the user it should better RTFM. The patch also removes some sonypi_camera_command() commands (those supposed to return the current camera settings) which are unreliable. The meye driver does not use them anyway. Signed-off-by:
Stelian Pop <stelian@popies.net> Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Martin Schwidefsky authored
From: Heiko Carstens <heiko.carstens@de.ibm.com> Remove the disputed hba api event callback code. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Start fixing KBUILD_OUTPUT support for UML. These changes are trivial and no-ops when this feature is not enabled - the "hard part" of this support is under discussion because it's hard to do properly (UML uses both shipped and build-generated headers from a lot of different directories, and for good reasons). Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it> Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Update/add some copyright notices. Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Update defconfigs for 2.6.10-rc2 Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
M68k I/O: Move HP300 I/O macros close to other I/O macros again (after merge error in 2.6.10-rc2) Signed-off-by:
-
Geert Uytterhoeven authored
fm2fb: Update Steffen A. Mork's email address Signed-off-by:
Steffen A. Mork <linux-dev@morknet.de> Signed-off-by:
-
Geert Uytterhoeven authored
Sun-3: Fix link error (we forgot to update vmlinux-sun3.lds during last update of vmlinux-std.lds) Signed-off-by:
-
Geert Uytterhoeven authored
68851 MMU: Fix harmless (CPU_68020 == MMU_68851 anyway) typo in the MMU configuration code. Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add 3 missing syscalls (up to 2.6.10-rc1) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Update defconfigs Signed-off-by:
-
Hirokazu Takata authored
cleanups for arch/m32r/kernel/io*.c. - Fix ugly indentation. - Change __inline__ to inline. - Remove RCS ID strings. Signed-off-by:
Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Hirokazu Takata authored
Here is a patch to update arch/m32r/Makefile for m32r. - Make zImage a default build target - Add zImage to targets marked with [*].
-
Hirokazu Takata authored
This patch fixes a hanging up at boot time of 2.6.10-rc2 m32r UP kernel. It was due to a lack of update_process_times() in time.c. Such a boot hang was caused only in UP systems, because update_process_times() had been executed correctly in smp_local_timer_interrupt() of arch/m32r/kernel/smp.c for SMP. arch/m32r/kernel/time.c: - UP: Fix do_timer_interrupt() to use update_process_times(). - UP: Move profile_tick() into do_timer_interrupt(). - Change __inline__ to inline. Signed-off-by:
-
Hirokazu Takata authored
This patch updates Kconfig and add Kconfig.debug for m32r. - arch/m32r/Kconfig: Move "Kernel hacking" menu to Kconfig.debug. - arch/m32r/Kconfig.debug: Newly added. - lib/Kconfig.debug: Add m32r arch. Signed-off-by:
-
Christoph Lameter authored
- reduce processing in timer interrupt through the use of a tasklet - fix various race conditions - use the correct interrupt vector for the SN2 RTC Signed-off-by:
Dimitri Sivanich <sivanich@sgi.com> Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Tom Rini authored
Port of the i386 patch of the same name. Signed-off-by:
Tom Rini <trini@kernel.crashing.org> Signed-off-by:
-
Olof Johansson authored
Documentation/DMA-mapping.txt says that pci_alloc_consistent() needs to return a mapping that is aligned by the closest larger order of two as the allocation. We're currently breaking this with our iommu code. To fix this, add align_order arguments to the relevant functions and pass it down. Specifying align_order of 0 gives same behaviour as previous. Signed-off-by:
Olof Johansson <olof@austin.ibm.com> Signed-off-by:
-
Paul Mackerras authored
This patch moves the emulate_step function, which is used in xmon's single-stepping code, out of xmon.c and into arch/ppc64/lib/sstep.c, so that kprobes can use it too. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Stephen Rothwell authored
This patch just makes sure that we do not dereference a viodasd gendisk pointer after it has been freed. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Andrew Morton authored
With newer gcc's: include/asm/thread_info.h:95: warning: unused variable `current_stack_pointer' Signed-off-by:
-
Adrian Bunk authored
drivers/scsi/osst.o(.bss+0x0): multiple definition of `ST_partstat' drivers/scsi/st.o(.bss+0x0): first defined here Signed-off-by:
Adrian Bunk <bunk@fs.tum.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by:
-
Tom Rini authored
<alebas@televes.com> found that CONFIG_8260 and CONFIG_BLK_DEV_INITRD was broken as arch/ppc/syslib/m8260_setup.c was missing <linux/root_dev.h>. Signed-off-by:
-
Adrian Bunk authored
drivers/isdn/divert/divert_init.c:25: error: conflicting types for 'printk' Signed-off-by:
-
Hugh Dickins authored
With Andrea Arcangeli <andrea@novell.com> Fix a hang which occurs when mlock() encounters a mapping of /dev/mem. These have VM_IO set. follow_page() keeps returning zero (not a valid pfn) and handle_mm_fault() keeps on returning VM_FAULT_MINOR (there's a pte there), so get_user_pages() locks up. The patch changes get_user_pages() to just bale out when it hits a VM_IO region. make_pages_present() is taught to ignore the resulting -EFAULT. We still have two bugs: a) If a process has a VM_IO vma, get_user_pages() will bale early, without having considered the vmas at higher virtual addresses. As do_mlock() also walks the vma list this bug is fairly benign, but get_user_pages() is doing the wrong thing there. b) The `len' argument to get_user_pages should be long, not int. We presently have a 16TB limit on 64-bit. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Neil Brown authored
We replace 'size' by 'start'. 'start' means exactly the same as 'curr_offset - size', and the equivalence of the new code can be tested based on this. The difference is that 'start' will never be negative and so can fit in a 'sector_t' while 'size' could be negative. Also make curr_offset sector_t, as it should have been. Signed-off-by:
-
Andrew Morton authored
The token-based thrashing control patches introduced a problem: when a task which doesn't hold the token tries to run direct-reclaim, that task is told that pages which belong to the token-holding mm are referenced, even though they are not. This means that it is possible for a huge number of a non-token-holding mm's pages to be scanned to no effect. Eventually, we give up and go and oom-kill something. So the patch arranges for the thrashing control logic to be defeated if the caller has reached the highest level of scanning priority. Signed-off-by:
-
Giuseppe Sacco authored
The current gbefb.c source cannot be compiled as module because of a small typo where "option" was written instead of "options" in two places. Signed-off-by:
-
Bjorn Helgaas authored
This changes the HCDP/PCDP support to use the early uart console rather than using early_serial_setup(). As a consequence, ia64 serial device names will now stay constant regardless of firmware console settings. (A serial device selected as an EFI console device on HP ia64 boxes used to automatically become ttyS0.) This also removes the ia64 early-boot kludge of assuming legacy COM ports at 0x3f8 and 0x2f8. For boxes that have legacy ports but no HCDP, "console=ttyS0" will still work, but the console won't start working until after the serial driver initializes and discovers the devices. WARNING: If you have an HP machine and you're using the MP serial console port (the connector labelled "console" on the 3-headed cable), this patch will break your console! HOW TO FIX IT: 1) The console device will change from /dev/ttyS0 to /dev/ttyS1, ttyS2, or ttyS3, so: 1a) Edit /etc/inittab to add a getty entry for /dev/ttyS1 (rx4640, rx5670, rx7620, rx8620, Superdome), /dev/ttyS2 (rx1600), or /dev/ttyS3 (rx2600). 1b) Edit /etc/securetty to add ttyS1, ttyS2, or ttyS3. 1c) Leave the existing ttyS0 entries in /etc/inittab and /etc/securetty so you can still boot old kernels. 2) Edit /etc/elilo.conf to remove any "console=" arguments (see [1]). 3) Run elilo to install the bootloader with new configuration. 4) Reboot and use the EFI boot option maintenance menu to select exactly one device for console output, input, and standard error. Then do a cold reset so the changes take effect. For the MP console, be careful to select the device with "Acpi(HWP0002,700)/Pci(...)/Uart" in the path (see [2]). DETAILS: - Prior to this patch, serial device names depended on the HCDP, which in turn depends on EFI console settings. After this patch, the naming always stays the same, regardless of firmware settings. For example, an rx1600 with a single built-in serial port plus an MP has these ports: Old Old MMIO (EFI console (EFI console address on builtin) on MP port) New ========== ========== ========== ====== builtin 0xff5e0000 ttyS0 ttyS1 ttyS0 MP UPS 0xf8031000 ttyS1 ttyS2 ttyS1 MP Console 0xf8030000 ttyS2 ttyS0 ttyS2 MP 2 0xf8030010 ttyS3 ttyS3 ttyS3 MP 3 0xf8030038 ttyS4 ttyS4 ttyS4 - If you want to have multiple devices in the EFI console path, you can, but Linux won't be able to deduce which console to use, so it will default to using VGA. You can use "console=hcdp" (the UART device from the EFI path) or "console=ttyS<n>" to select the device directly. TROUBLESHOOTING: - No kernel output after "Uncompressing Linux... done": -> You're using an MP port as the console and specified "console=ttyS0". This port is now named something else. Remove the "console=" option. -> Multiple UARTs selected as EFI console devices, and you're looking at the wrong one. Make sure only one UART is selected (use the EFI Boot Manager "Boot option maintenance" menu). -> You're physically connected to the MP port but have a non-MP UART selected as EFI console device. Either move the console cable to the non-MP UART, or change the EFI console path to the MP UART (the MP UART is the one with "Acpi(HWP0002,700)/Pci(...)/Uart" in it.) - Long pause (60+ seconds) between "Uncompressing Linux... done" and start of kernel output: -> No early console, probably because you used "console=ttyS<n>". Remove the "console=" option. - Kernel and init script output works fine, but no "login:" prompt: -> Add getty entry to /etc/inittab for console tty. Use the table in (1a) above or look for the "Adding console on ttyS<n>" message that tells you which device is the console. - "login:" prompt, but can't login as root: -> Add entry to /etc/securetty for console tty. [1] When the EFI console path contains exactly one device (either serial or VGA), 2.6.6 and newer kernels default to that device automatically. So if you remove "console=" arguments, you can use the same elilo configuration to boot any 2.6.6 or newer kernel with or without this patch. If you need to boot kernels older than 2.6.6 (including RHEL3 and SLES9), keep an 'append="console=ttyS0"' line in those elilo.conf stanzas. Non-HP machines will still need "console=" for serial consoles because they don't supply the HCDP table. [2] The HP management card (MP) causes confusion because it is always active as an EFI console, even if it doesn't appear in the EFI console path. If your console path is set to a non-MP UART, and you happen to be attached to the MP UART, everything works in EFI, but the kernel will think the non-MP UART is the console, so you won't see any kernel output. Signed-off-by:Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
