- 21 Apr, 2020 7 commits
-
-
Florian Fainelli authored
[ Upstream commit 806fd188 ] After commit bfcb8132 ("net: dsa: configure the MTU for switch ports") my Lamobo R1 platform which uses an allwinner,sun7i-a20-gmac compatible Ethernet MAC started to fail by rejecting a MTU of 1536. The reason for that is that the DMA capabilities are not readable on this version of the IP, and there is also no 'tx-fifo-depth' property being provided in Device Tree. The property is documented as optional, and is not provided. Chen-Yu indicated that the FIFO sizes are 4KB for TX and 16KB for RX, so provide these values through platform data as an immediate fix until various Device Tree sources get updated accordingly. Fixes: eaf4fac4 ("net: stmmac: Do not accept invalid MTU values") Suggested-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Konstantin Khlebnikov authored
[ Upstream commit a4837980 ] For HZ < 1000 timeout 2000us rounds up to 1 jiffy but expires randomly because next timer interrupt could come shortly after starting softirq. For commonly used CONFIG_HZ=1000 nothing changes. Fixes: 7acf8a1e ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning") Reported-by:
Dmitry Yakunin <zeil@yandex-team.ru> Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Wang Wenhu authored
[ Upstream commit 6dbf02ac ] If the local node id(qrtr_local_nid) is not modified after its initialization, it equals to the broadcast node id(QRTR_NODE_BCAST). So the messages from local node should not be taken as broadcast and keep the process going to send them out anyway. The definitions are as follow: static unsigned int qrtr_local_nid = NUMA_NO_NODE; Fixes: fdf5fd39 ("net: qrtr: Broadcast messages only from control port") Signed-off-by:
Wang Wenhu <wenhu.wang@vivo.com> Signed-off-by:
-
Tim Stallard authored
[ Upstream commit 03e2a984 ] The behaviour for what is considered an anycast address changed in commit 45e4fd26 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception"). This now considers the first address in a subnet where there is a route via a gateway to be an anycast address. This breaks path MTU discovery and traceroutes when a host in a remote network uses the address at the start of a prefix (eg 2600:: advertised as 2600::/48 in the DFZ) as ICMP errors will not be sent to anycast addresses. This patch excludes any routes with a gateway, or via point to point links, like the behaviour previously from rt6_is_gw_or_nonexthop in net/ipv6/route.c. This can be tested with: ip link add v1 type veth peer name v2 ip netns add test ip netns exec test ip link set lo up ip link set v2 netns test ip link set v1 up ip netns exec test ip link set v2 up ip addr add 2001:db8::1/64 dev v1 nodad ip addr add 2001:db8:100:: dev lo nodad ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad ip netns exec test ip route add unreachable 2001:db8:1::1 ip netns exec test ip route add 2001:db8:100::/64 via 2001:db8::1 ip netns exec test sysctl net.ipv6.conf.all.forwarding=1 ip route add 2001:db8:1::1 via 2001:db8::2 ping -I 2001:db8::1 2001:db8:1::1 -c1 ping -I 2001:db8:100:: 2001:db8:1::1 -c1 ip addr delete 2001:db8:100:: dev lo ip netns delete test Currently the first ping will get back a destination unreachable ICMP error, but the second will never get a response, with "icmp6_send: acast source" logged. After this patch, both get destination unreachable ICMP replies. Fixes: 45e4fd26 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by:
Tim Stallard <code@timstallard.me.uk> Signed-off-by:
-
Taras Chornyi authored
[ Upstream commit 690cc863 ] When CONFIG_IP_MULTICAST is not set and multicast ip is added to the device with autojoin flag or when multicast ip is deleted kernel will crash. steps to reproduce: ip addr add 224.0.0.0/32 dev eth0 ip addr del 224.0.0.0/32 dev eth0 or ip addr add 224.0.0.0/32 dev eth0 autojoin Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 pc : _raw_write_lock_irqsave+0x1e0/0x2ac lr : lock_sock_nested+0x1c/0x60 Call trace: _raw_write_lock_irqsave+0x1e0/0x2ac lock_sock_nested+0x1c/0x60 ip_mc_config.isra.28+0x50/0xe0 inet_rtm_deladdr+0x1a8/0x1f0 rtnetlink_rcv_msg+0x120/0x350 netlink_rcv_skb+0x58/0x120 rtnetlink_rcv+0x14/0x20 netlink_unicast+0x1b8/0x270 netlink_sendmsg+0x1a0/0x3b0 ____sys_sendmsg+0x248/0x290 ___sys_sendmsg+0x80/0xc0 __sys_sendmsg+0x68/0xc0 __arm64_sys_sendmsg+0x20/0x30 el0_svc_common.constprop.2+0x88/0x150 do_el0_svc+0x20/0x80 el0_sync_handler+0x118/0x190 el0_sync+0x140/0x180 Fixes: 93a714d6 ("multicast: Extend ip address command to enable multicast group join/leave on") Signed-off-by:
Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by:
Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 4faab8c4 ] In the current hsr code, only 0 and 1 protocol versions are valid. But current hsr code doesn't check the version, which is received by userspace. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 version 4 In the test commands, version 4 is invalid. So, the command should be failed. After this patch, following error will occur. "Error: hsr: Only versions 0..1 are supported." Fixes: ee1c2797 ("net/hsr: Added support for HSR v1") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
[ Upstream commit d518691c ] The driver uses __napi_schedule_irqoff() which is fine as long as it is invoked with disabled interrupts by everybody. Since the commit mentioned below the driver may invoke xgbe_isr_task() in tasklet/softirq context. This may lead to list corruption if another driver uses __napi_schedule_irqoff() in IRQ context. Use __napi_schedule() which safe to use from IRQ and softirq context. Fixes: 85b85c85 ("amd-xgbe: Re-issue interrupt if interrupt status not cleared") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Tom Lendacky <thomas.lendacky@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
- 17 Apr, 2020 33 commits
-
-
Greg Kroah-Hartman authored
-
Gary Lin authored
[ Upstream commit a4b81ccf ] efi_thunk_set_variable() treated the NULL "data" pointer as an invalid parameter, and this broke the deletion of variables in mixed mode. This commit fixes the check of data so that the userspace program can delete a variable in mixed mode. Fixes: 8319e9d5 ("efi/x86: Handle by-ref arguments covering multiple pages in mixed mode") Signed-off-by:
Gary Lin <glin@suse.com> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200408081606.1504-1-glin@suse.com Link: https://lore.kernel.org/r/20200409130434.6736-9-ardb@kernel.orgSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Andy Shevchenko authored
[ Upstream commit fb945c95 ] While the commit 2b8bd606 ("mfd: dln2: More sanity checking for endpoints") tries to harden the sanity checks it made at the same time a regression, i.e. mixed in and out endpoints. Obviously it should have been not tested on real hardware at that time, but unluckily it didn't happen. So, fix above mentioned typo and make device being enumerated again. While here, introduce an enumerator for magic values to prevent similar issue to happen in the future. Fixes: 2b8bd606 ("mfd: dln2: More sanity checking for endpoints") Cc: Oliver Neukum <oneukum@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Christian Gmeiner authored
[ Upstream commit 15ff4a7b ] As seen at CodeAurora's linux-imx git repo in imx_4.19.35_1.0.0 branch. Signed-off-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 85dc2c65 ] Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/misc/echo/echo.c:384:27: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((ec->nonupdate_dwell == 0)) { ~~~~~~~~~~~~~~~~~~~~^~~~ drivers/misc/echo/echo.c:384:27: note: remove extraneous parentheses around the comparison to silence this warning if ((ec->nonupdate_dwell == 0)) { ~ ^ ~ drivers/misc/echo/echo.c:384:27: note: use '=' to turn this equality comparison into an assignment if ((ec->nonupdate_dwell == 0)) { ^~ = 1 warning generated. Remove them and while we're at it, simplify the zero check as '!var' is used more than 'var == 0'. Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
Laurentiu Tudor authored
[ Upstream commit aa411334 ] In the current implementation, the call to loadcam_multi() is wrapped between switch_to_as1() and restore_to_as0() calls so, when it tries to create its own temporary AS=1 TLB1 entry, it ends up duplicating the existing one created by switch_to_as1(). Add a check to skip creating the temporary entry if already running in AS=1. Fixes: d9e1831a ("powerpc/85xx: Load all early TLB entries at once") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by:
Scott Wood <oss@buserror.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200123111914.2565-1-laurentiu.tudor@nxp.comSigned-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 6a13a0d7 ] Show maxactive parameter on kprobe_events. This allows user to save the current configuration and restore it without losing maxactive parameter. Link: http://lkml.kernel.org/r/4762764a-6df7-bc93-ed60-e336146dce1f@gmail.com Link: http://lkml.kernel.org/r/158503528846.22706.5549974121212526020.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 696ced4f ("tracing/kprobes: expose maxactive for kretprobe in kprobe_events") Reported-by:
Taeung Song <treeze.taeung@gmail.com> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Chris Wilson authored
[ Upstream commit ea36ec86 ] drm_pci_alloc/drm_pci_free are very thin wrappers around the core dma facilities, and we have no special reason within the drm layer to behave differently. In particular, since commit de09d31d Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Date: Fri Jan 15 16:51:42 2016 -0800 page-flags: define PG_reserved behavior on compound pages As far as I can see there's no users of PG_reserved on compound pages. Let's use PF_NO_COMPOUND here. it has been illegal to combine GFP_COMP with SetPageReserved, so lets stop doing both and leave the dma layer to its own devices. Reported-by: Taketo Kabe Bug: https://gitlab.freedesktop.org/drm/intel/issues/1027 Fixes: de09d31d ("page-flags: define PG_reserved behavior on compound pages") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.5+ Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200202171635.4039044-1-chris@chris-wilson.co.ukSigned-off-by:
-
Lyude Paul authored
[ Upstream commit 8732fe46 ] The issues caused by: commit 64e62bdf ("drm/dp_mst: Remove VCPI while disabling topology mgr") Prompted me to take a closer look at how we clear the payload state in general when disabling the topology, and it turns out there's actually two subtle issues here. The first is that we're not grabbing &mgr.payload_lock when clearing the payloads in drm_dp_mst_topology_mgr_set_mst(). Seeing as the canonical lock order is &mgr.payload_lock -> &mgr.lock (because we always want &mgr.lock to be the inner-most lock so topology validation always works), this makes perfect sense. It also means that -technically- there could be racing between someone calling drm_dp_mst_topology_mgr_set_mst() to disable the topology, along with a modeset occurring that's modifying the payload state at the same time. The second is the more obvious issue that Wayne Lin discovered, that we're not clearing proposed_payloads when disabling the topology. I actually can't see any obvious places where the racing caused by the first issue would break something, and it could be that some of our higher-level locks already prevent this by happenstance, but better safe then sorry. So, let's make it so that drm_dp_mst_topology_mgr_set_mst() first grabs &mgr.payload_lock followed by &mgr.lock so that we never race when modifying the payload state. Then, we also clear proposed_payloads to fix the original issue of enabling a new topology with a dirty payload state. This doesn't clear any of the drm_dp_vcpi structures, but those are getting destroyed along with the ports anyway. Changes since v1: * Use sizeof(mgr->payloads[0])/sizeof(mgr->proposed_vcpis[0]) instead - vsyrjala Cc: Sean Paul <sean@poorly.run> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-1-lyude@redhat.comSigned-off-by:
-
Sasha Levin authored
[ Upstream commit a8667596 ] This reverts commit 64e62bdf. This commit ends up causing some lockdep splats due to trying to grab the payload lock while holding the mgr's lock: [ 54.010099] [ 54.011765] ====================================================== [ 54.018670] WARNING: possible circular locking dependency detected [ 54.025577] 5.5.0-rc6-02274-g77381c23ee63 #47 Not tainted [ 54.031610] ------------------------------------------------------ [ 54.038516] kworker/1:6/1040 is trying to acquire lock: [ 54.044354] ffff888272af3228 (&mgr->payload_lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.054957] [ 54.054957] but task is already holding lock: [ 54.061473] ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.071193] [ 54.071193] which lock already depends on the new lock. [ 54.071193] [ 54.080334] [ 54.080334] the existing dependency chain (in reverse order) is: [ 54.088697] [ 54.088697] -> #1 (&mgr->lock){+.+.}: [ 54.094440] __mutex_lock+0xc3/0x498 [ 54.099015] drm_dp_mst_topology_get_port_validated+0x25/0x80 [ 54.106018] drm_dp_update_payload_part1+0xa2/0x2e2 [ 54.112051] intel_mst_pre_enable_dp+0x144/0x18f [ 54.117791] intel_encoders_pre_enable+0x63/0x70 [ 54.123532] hsw_crtc_enable+0xa1/0x722 [ 54.128396] intel_update_crtc+0x50/0x194 [ 54.133455] skl_commit_modeset_enables+0x40c/0x540 [ 54.139485] intel_atomic_commit_tail+0x5f7/0x130d [ 54.145418] intel_atomic_commit+0x2c8/0x2d8 [ 54.150770] drm_atomic_helper_set_config+0x5a/0x70 [ 54.156801] drm_mode_setcrtc+0x2ab/0x833 [ 54.161862] drm_ioctl+0x2e5/0x424 [ 54.166242] vfs_ioctl+0x21/0x2f [ 54.170426] do_vfs_ioctl+0x5fb/0x61e [ 54.175096] ksys_ioctl+0x55/0x75 [ 54.179377] __x64_sys_ioctl+0x1a/0x1e [ 54.184146] do_syscall_64+0x5c/0x6d [ 54.188721] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 54.194946] [ 54.194946] -> #0 (&mgr->payload_lock){+.+.}: [ 54.201463] [ 54.201463] other info that might help us debug this: [ 54.201463] [ 54.210410] Possible unsafe locking scenario: [ 54.210410] [ 54.217025] CPU0 CPU1 [ 54.222082] ---- ---- [ 54.227138] lock(&mgr->lock); [ 54.230643] lock(&mgr->payload_lock); [ 54.237742] lock(&mgr->lock); [ 54.244062] lock(&mgr->payload_lock); [ 54.248346] [ 54.248346] *** DEADLOCK *** [ 54.248346] [ 54.254959] 7 locks held by kworker/1:6/1040: [ 54.259822] #0: ffff888275c4f528 ((wq_completion)events){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.269451] #1: ffffc9000119beb0 ((work_completion)(&(&dev_priv->hotplug.hotplug_work)->work)){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.282768] #2: ffff888272a403f0 (&dev->mode_config.mutex){+.+.}, at: i915_hotplug_work_func+0x4b/0x2be [ 54.293368] #3: ffffffff824fc6c0 (drm_connector_list_iter){.+.+}, at: i915_hotplug_work_func+0x17e/0x2be [ 54.304061] #4: ffffc9000119bc58 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x40/0xfd [ 54.314855] #5: ffff888272a40470 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x74/0xe2 [ 54.324385] #6: ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.334597] [ 54.334597] stack backtrace: [ 54.339464] CPU: 1 PID: 1040 Comm: kworker/1:6 Not tainted 5.5.0-rc6-02274-g77381c23ee63 #47 [ 54.348893] Hardware name: Google Fizz/Fizz, BIOS Google_Fizz.10139.39.0 01/04/2018 [ 54.357451] Workqueue: events i915_hotplug_work_func [ 54.362995] Call Trace: [ 54.365724] dump_stack+0x71/0x9c [ 54.369427] check_noncircular+0x91/0xbc [ 54.373809] ? __lock_acquire+0xc9e/0xf66 [ 54.378286] ? __lock_acquire+0xc9e/0xf66 [ 54.382763] ? lock_acquire+0x175/0x1ac [ 54.387048] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.393177] ? __mutex_lock+0xc3/0x498 [ 54.397362] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.403492] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.409620] ? drm_dp_dpcd_access+0xd9/0x101 [ 54.414390] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.420517] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.426645] ? intel_digital_port_connected+0x34d/0x35c [ 54.432482] ? intel_dp_detect+0x227/0x44e [ 54.437056] ? ww_mutex_lock+0x49/0x9a [ 54.441242] ? drm_helper_probe_detect_ctx+0x75/0xfd [ 54.446789] ? intel_encoder_hotplug+0x4b/0x97 [ 54.451752] ? intel_ddi_hotplug+0x61/0x2e0 [ 54.456423] ? mark_held_locks+0x53/0x68 [ 54.460803] ? _raw_spin_unlock_irqrestore+0x3a/0x51 [ 54.466347] ? lockdep_hardirqs_on+0x187/0x1a4 [ 54.471310] ? drm_connector_list_iter_next+0x89/0x9a [ 54.476953] ? i915_hotplug_work_func+0x206/0x2be [ 54.482208] ? worker_thread+0x4d5/0x6e2 [ 54.486587] ? worker_thread+0x455/0x6e2 [ 54.490966] ? queue_work_on+0x64/0x64 [ 54.495151] ? kthread+0x1e9/0x1f1 [ 54.498946] ? queue_work_on+0x64/0x64 [ 54.503130] ? kthread_unpark+0x5e/0x5e [ 54.507413] ? ret_from_fork+0x3a/0x50 The proper fix for this is probably cleanup the VCPI allocations when we're enabling the topology, or on the first payload allocation. For now though, let's just revert. Signed-off-by:
Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200117205149.97262-1-lyude@redhat.comSigned-off-by:
-
Gilad Ben-Yossef authored
[ Upstream commit 504e84ab ] Make sure to only add the size of the auth tag to the source mapping for encryption if it is an in-place operation. Failing to do this previously caused us to try and map auth size len bytes from a NULL mapping and crashing if both the cryptlen and assoclen are zero. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Tested-by:
Gilad Ben-Yossef <gilad@benyossef.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Gilad Ben-Yossef authored
[ Upstream commit 8962c6d2 ] Remove the auth tag size from cryptlen before mapping the destination in out-of-place AEAD decryption thus resolving a crash with extended testmgr tests. Signed-off-by:
-
Gilad Ben-Yossef authored
[ Upstream commit da3cf67f ] We were mangling the request struct assoclen field. Fix it by keeping an internal version and working on it. Signed-off-by:
-
Gilad Ben-Yossef authored
[ Upstream commit 9f31eb6e ] We did not zero out the internal struct before use causing problem in some rare error code paths. Signed-off-by:
-
Hadar Gat authored
[ Upstream commit ccba2f11 ] pass the returned error code to the higher level functions Signed-off-by:
Hadar Gat <hadar.gat@arm.com> Signed-off-by:
-
Andrei Botila authored
[ Upstream commit 3f142b6a ] Since in the software implementation of XTS-AES there is no notion of sector every input length is processed the same way. CAAM implementation has the notion of sector which causes different results between the software implementation and the one in CAAM for input lengths bigger than 512 bytes. Increase sector size to maximum value on 16 bits. Fixes: c6415a60 ("crypto: caam - add support for acipher xts(aes)") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by:
Andrei Botila <andrei.botila@nxp.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Bob Liu authored
[ Upstream commit b8fdd090 ] zmd->nr_rnd_zones was increased twice by mistake. The other place it is increased in dmz_init_zone() is the only one needed: 1131 zmd->nr_useable_zones++; 1132 if (dmz_is_rnd(zone)) { 1133 zmd->nr_rnd_zones++; ^^^ Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by:
Bob Liu <bob.liu@oracle.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Josef Bacik authored
[ Upstream commit 351cbf6e ] Zygo reported the following lockdep splat while testing the balance patches ====================================================== WARNING: possible circular locking dependency detected 5.6.0-c6f0579d496a+ #53 Not tainted ------------------------------------------------------ kswapd0/1133 is trying to acquire lock: ffff888092f622c0 (&delayed_node->mutex){+.+.}, at: __btrfs_release_delayed_node+0x7c/0x5b0 but task is already holding lock: ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}: fs_reclaim_acquire.part.91+0x29/0x30 fs_reclaim_acquire+0x19/0x20 kmem_cache_alloc_trace+0x32/0x740 add_block_entry+0x45/0x260 btrfs_ref_tree_mod+0x6e2/0x8b0 btrfs_alloc_tree_block+0x789/0x880 alloc_tree_block_no_bg_flush+0xc6/0xf0 __btrfs_cow_block+0x270/0x940 btrfs_cow_block+0x1ba/0x3a0 btrfs_search_slot+0x999/0x1030 btrfs_insert_empty_items+0x81/0xe0 btrfs_insert_delayed_items+0x128/0x7d0 __btrfs_run_delayed_items+0xf4/0x2a0 btrfs_run_delayed_items+0x13/0x20 btrfs_commit_transaction+0x5cc/0x1390 insert_balance_item.isra.39+0x6b2/0x6e0 btrfs_balance+0x72d/0x18d0 btrfs_ioctl_balance+0x3de/0x4c0 btrfs_ioctl+0x30ab/0x44a0 ksys_ioctl+0xa1/0xe0 __x64_sys_ioctl+0x43/0x50 do_syscall_64+0x77/0x2c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&delayed_node->mutex){+.+.}: __lock_acquire+0x197e/0x2550 lock_acquire+0x103/0x220 __mutex_lock+0x13d/0xce0 mutex_lock_nested+0x1b/0x20 __btrfs_release_delayed_node+0x7c/0x5b0 btrfs_remove_delayed_node+0x49/0x50 btrfs_evict_inode+0x6fc/0x900 evict+0x19a/0x2c0 dispose_list+0xa0/0xe0 prune_icache_sb+0xbd/0xf0 super_cache_scan+0x1b5/0x250 do_shrink_slab+0x1f6/0x530 shrink_slab+0x32e/0x410 shrink_node+0x2a5/0xba0 balance_pgdat+0x4bd/0x8a0 kswapd+0x35a/0x800 kthread+0x1e9/0x210 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&delayed_node->mutex); lock(fs_reclaim); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by kswapd0/1133: #0: ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 #1: ffffffff8fc380d8 (shrinker_rwsem){++++}, at: shrink_slab+0x1e8/0x410 #2: ffff8881e0e6c0e8 (&type->s_umount_key#42){++++}, at: trylock_super+0x1b/0x70 stack backtrace: CPU: 2 PID: 1133 Comm: kswapd0 Not tainted 5.6.0-c6f0579d496a+ #53 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: dump_stack+0xc1/0x11a print_circular_bug.isra.38.cold.57+0x145/0x14a check_noncircular+0x2a9/0x2f0 ? print_circular_bug.isra.38+0x130/0x130 ? stack_trace_consume_entry+0x90/0x90 ? save_trace+0x3cc/0x420 __lock_acquire+0x197e/0x2550 ? btrfs_inode_clear_file_extent_range+0x9b/0xb0 ? register_lock_class+0x960/0x960 lock_acquire+0x103/0x220 ? __btrfs_release_delayed_node+0x7c/0x5b0 __mutex_lock+0x13d/0xce0 ? __btrfs_release_delayed_node+0x7c/0x5b0 ? __asan_loadN+0xf/0x20 ? pvclock_clocksource_read+0xeb/0x190 ? __btrfs_release_delayed_node+0x7c/0x5b0 ? mutex_lock_io_nested+0xc20/0xc20 ? __kasan_check_read+0x11/0x20 ? check_chain_key+0x1e6/0x2e0 mutex_lock_nested+0x1b/0x20 ? mutex_lock_nested+0x1b/0x20 __btrfs_release_delayed_node+0x7c/0x5b0 btrfs_remove_delayed_node+0x49/0x50 btrfs_evict_inode+0x6fc/0x900 ? btrfs_setattr+0x840/0x840 ? do_raw_spin_unlock+0xa8/0x140 evict+0x19a/0x2c0 dispose_list+0xa0/0xe0 prune_icache_sb+0xbd/0xf0 ? invalidate_inodes+0x310/0x310 super_cache_scan+0x1b5/0x250 do_shrink_slab+0x1f6/0x530 shrink_slab+0x32e/0x410 ? do_shrink_slab+0x530/0x530 ? do_shrink_slab+0x530/0x530 ? __kasan_check_read+0x11/0x20 ? mem_cgroup_protected+0x13d/0x260 shrink_node+0x2a5/0xba0 balance_pgdat+0x4bd/0x8a0 ? mem_cgroup_shrink_node+0x490/0x490 ? _raw_spin_unlock_irq+0x27/0x40 ? finish_task_switch+0xce/0x390 ? rcu_read_lock_bh_held+0xb0/0xb0 kswapd+0x35a/0x800 ? _raw_spin_unlock_irqrestore+0x4c/0x60 ? balance_pgdat+0x8a0/0x8a0 ? finish_wait+0x110/0x110 ? __kasan_check_read+0x11/0x20 ? __kthread_parkme+0xc6/0xe0 ? balance_pgdat+0x8a0/0x8a0 kthread+0x1e9/0x210 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x50 This is because we hold that delayed node's mutex while doing tree operations. Fix this by just wrapping the searches in nofs. CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Clement Courbet authored
commit c17eb4dc upstream. Declaring setjmp()/longjmp() as taking longs makes the signature non-standard, and makes clang complain. In the past, this has been worked around by adding -ffreestanding to the compile flags. The implementation looks like it only ever propagates the value (in longjmp) or sets it to 1 (in setjmp), and we only call longjmp with integer parameters. This allows removing -ffreestanding from the compilation flags. Fixes: c9029ef9 ("powerpc: Avoid clang warnings around setjmp and longjmp") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Clement Courbet <courbet@google.com> Reviewed-by:
-
Segher Boessenkool authored
commit aa497d43 upstream. The setjmp function should be declared as "returns_twice", or bad things can happen[1]. This does not actually change generated code in my testing. The longjmp function should be declared as "noreturn", so that the compiler can optimise calls to it better. This makes the generated code a little shorter. 1: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-returns_005ftwice-function-attributeSigned-off-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
-
Sreekanth Reddy authored
commit cc41f11a upstream. Generic protection fault type kernel panic is observed when user performs soft (ordered) HBA unplug operation while IOs are running on drives connected to HBA. When user performs ordered HBA removal operation, the kernel calls PCI device's .remove() call back function where driver is flushing out all the outstanding SCSI IO commands with DID_NO_CONNECT host byte and also unmaps sg buffers allocated for these IO commands. However, in the ordered HBA removal case (unlike of real HBA hot removal), HBA device is still alive and hence HBA hardware is performing the DMA operations to those buffers on the system memory which are already unmapped while flushing out the outstanding SCSI IO commands and this leads to kernel panic. Don't flush out the outstanding IOs from .remove() path in case of ordered removal since HBA will be still alive in this case and it can complete the outstanding IOs. Flush out the outstanding IOs only in case of 'physical HBA hot unplug' where there won't be any communication with the HBA. During shutdown also it is possible that HBA hardware can perform DMA operations on those outstanding IO buffers which are completed with DID_NO_CONNECT by the driver from .shutdown(). So same above fix is applied in shutdown path as well. It is safe to drop the outstanding commands when HBA is inaccessible such as when permanent PCI failure happens, when HBA is in non-operational state, or when someone does a real HBA hot unplug operation. Since driver knows that HBA is inaccessible during these cases, it is safe to drop the outstanding commands instead of waiting for SCSI error recovery to kick in and clear these outstanding commands. Link: https://lore.kernel.org/r/1585302763-23007-1-git-send-email-sreekanth.reddy@broadcom.com Fixes: c666d3be ("scsi: mpt3sas: wait for and flush running commands on shutdown/unload") Cc: stable@vger.kernel.org #v4.14.174+ Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Christophe Leroy authored
commit 21f8b2fa upstream. When a program check exception happens while MMU translation is disabled, following Oops happens in kprobe_handler() in the following code: } else if (*addr != BREAKPOINT_INSTRUCTION) { BUG: Unable to handle kernel data access on read at 0x0000e268 Faulting instruction address: 0xc000ec34 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=16K PREEMPT CMPC885 Modules linked in: CPU: 0 PID: 429 Comm: cat Not tainted 5.6.0-rc1-s3k-dev-00824-g84195dc6c58a #3267 NIP: c000ec34 LR: c000ecd8 CTR: c019cab8 REGS: ca4d3b58 TRAP: 0300 Not tainted (5.6.0-rc1-s3k-dev-00824-g84195dc6c58a) MSR: 00001032 <ME,IR,DR,RI> CR: 2a4d3c52 XER: 00000000 DAR: 0000e268 DSISR: c0000000 GPR00: c000b09c ca4d3c10 c66d0620 00000000 ca4d3c60 00000000 00009032 00000000 GPR08: 00020000 00000000 c087de44 c000afe0 c66d0ad0 100d3dd6 fffffff3 00000000 GPR16: 00000000 00000041 00000000 ca4d3d70 00000000 00000000 0000416d 00000000 GPR24: 00000004 c53b6128 00000000 0000e268 00000000 c07c0000 c07bb6fc ca4d3c60 NIP [c000ec34] kprobe_handler+0x128/0x290 LR [c000ecd8] kprobe_handler+0x1cc/0x290 Call Trace: [ca4d3c30] [c000b09c] program_check_exception+0xbc/0x6fc [ca4d3c50] [c000e43c] ret_from_except_full+0x0/0x4 --- interrupt: 700 at 0xe268 Instruction dump: 913e0008 81220000 38600001 3929ffff 91220000 80010024 bb410008 7c0803a6 38210020 4e800020 38600000 4e800020 <813b0000> 6d2a7fe0 2f8a0008 419e0154 ---[ end trace 5b9152d4cdadd06d ]--- kprobe is not prepared to handle events in real mode and functions running in real mode should have been blacklisted, so kprobe_handler() can safely bail out telling 'this trap is not mine' for any trap that happened while in real-mode. If the trap happened with MSR_IR or MSR_DR cleared, return 0 immediately. Reported-by:
Larry Finger <Larry.Finger@lwfinger.net> Fixes: 6cc89bad ("powerpc/kprobes: Invoke handlers directly") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Cédric Le Goater authored
commit b1a504a6 upstream. When a CPU is brought up, an IPI number is allocated and recorded under the XIVE CPU structure. Invalid IPI numbers are tracked with interrupt number 0x0. On the PowerNV platform, the interrupt number space starts at 0x10 and this works fine. However, on the sPAPR platform, it is possible to allocate the interrupt number 0x0 and this raises an issue when CPU 0 is unplugged. The XIVE spapr driver tracks allocated interrupt numbers in a bitmask and it is not correctly updated when interrupt number 0x0 is freed. It stays allocated and it is then impossible to reallocate. Fix by using the XIVE_BAD_IRQ value instead of zero on both platforms. Reported-by:
David Gibson <david@gibson.dropbear.id.au> Fixes: eac1e731 ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Cédric Le Goater <clg@kaod.org> Reviewed-by:
-
Aneesh Kumar K.V authored
commit 36b78402 upstream. H_PAGE_THP_HUGE is used to differentiate between a THP hugepage and hugetlb hugepage entries. The difference is WRT how we handle hash fault on these address. THP address enables MPSS in segments. We want to manage devmap hugepage entries similar to THP pt entries. Hence use H_PAGE_THP_HUGE for devmap huge PTE entries. With current code while handling hash PTE fault, we do set is_thp = true when finding devmap PTE huge PTE entries. Current code also does the below sequence we setting up huge devmap entries. entry = pmd_mkhuge(pfn_t_pmd(pfn, prot)); if (pfn_t_devmap(pfn)) entry = pmd_mkdevmap(entry); In that case we would find both H_PAGE_THP_HUGE and PAGE_DEVMAP set for huge devmap PTE entries. This results in false positive error like below. kernel BUG at /home/kvaneesh/src/linux/mm/memory.c:4321! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 56 PID: 67996 Comm: t_mmap_dio Not tainted 5.6.0-rc4-59640-g371c804dedbc #128 .... NIP [c00000000044c9e4] __follow_pte_pmd+0x264/0x900 LR [c0000000005d45f8] dax_writeback_one+0x1a8/0x740 Call Trace: str_spec.74809+0x22ffb4/0x2d116c (unreliable) dax_writeback_one+0x1a8/0x740 dax_writeback_mapping_range+0x26c/0x700 ext4_dax_writepages+0x150/0x5a0 do_writepages+0x68/0x180 __filemap_fdatawrite_range+0x138/0x180 file_write_and_wait_range+0xa4/0x110 ext4_sync_file+0x370/0x6e0 vfs_fsync_range+0x70/0xf0 sys_msync+0x220/0x2e0 system_call+0x5c/0x68 This is because our pmd_trans_huge check doesn't exclude _PAGE_DEVMAP. To make this all consistent, update pmd_mkdevmap to set H_PAGE_THP_HUGE and pmd_trans_huge check now excludes _PAGE_DEVMAP correctly. Fixes: ebd31197 ("powerpc/mm: Add devmap support for ppc64") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
commit c7def7fb upstream. In restore_tm_sigcontexts() we take the trap value directly from the user sigcontext with no checking: err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]); This means we can be in the kernel with an arbitrary regs->trap value. Although that's not immediately problematic, there is a risk we could trigger one of the uses of CHECK_FULL_REGS(): #define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) It can also cause us to unnecessarily save non-volatile GPRs again in save_nvgprs(), which shouldn't be problematic but is still wrong. It's also possible it could trick the syscall restart machinery, which relies on regs->trap not being == 0xc00 (see 9a81c16b ("powerpc: fix double syscall restarts")), though I haven't been able to make that happen. Finally it doesn't match the behaviour of the non-TM case, in restore_sigcontext() which zeroes regs->trap. So change restore_tm_sigcontexts() to zero regs->trap. This was discovered while testing Nick's upcoming rewrite of the syscall entry path. In that series the call to save_nvgprs() prior to signal handling (do_notify_resume()) is removed, which leaves the low-bit of regs->trap uncleared which can then trigger the FULL_REGS() WARNs in setup_tm_sigcontexts(). Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by:
-
Michael Ellerman authored
commit 53a712ba upstream. In order to implement KUAP (Kernel Userspace Access Protection) on Power9 we will be using the AMR, and therefore indirectly the UAMOR/AMOR. So save/restore these regs in the idle code. Signed-off-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
Juergen Gross authored
commit 3a169c0b upstream. Commit 1d5c76e6 ("xen-blkfront: switch kcalloc to kvcalloc for large array allocation") didn't fix the issue it was meant to, as the flags for allocating the memory are GFP_NOIO, which will lead the memory allocation falling back to kmalloc(). So instead of GFP_NOIO use GFP_KERNEL and do all the memory allocation in blkfront_setup_indirect() in a memalloc_noio_{save,restore} section. Fixes: 1d5c76e6 ("xen-blkfront: switch kcalloc to kvcalloc for large array allocation") Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20200403090034.8753-1-jgross@suse.comSigned-off-by:
-
Wen Yang authored
commit 32830a05 upstream. The wait_event() function is used to detect command completion. When send_guid_cmd() returns an error, smi_send() has not been called to send data. Therefore, wait_event() should not be used on the error path, otherwise it will cause the following warning: [ 1361.588808] systemd-udevd D 0 1501 1436 0x00000004 [ 1361.588813] ffff883f4b1298c0 0000000000000000 ffff883f4b188000 ffff887f7e3d9f40 [ 1361.677952] ffff887f64bd4280 ffffc90037297a68 ffffffff8173ca3b ffffc90000000010 [ 1361.767077] 00ffc90037297ad0 ffff887f7e3d9f40 0000000000000286 ffff883f4b188000 [ 1361.856199] Call Trace: [ 1361.885578] [<ffffffff8173ca3b>] ? __schedule+0x23b/0x780 [ 1361.951406] [<ffffffff8173cfb6>] schedule+0x36/0x80 [ 1362.010979] [<ffffffffa071f178>] get_guid+0x118/0x150 [ipmi_msghandler] [ 1362.091281] [<ffffffff810d5350>] ? prepare_to_wait_event+0x100/0x100 [ 1362.168533] [<ffffffffa071f755>] ipmi_register_smi+0x405/0x940 [ipmi_msghandler] [ 1362.258337] [<ffffffffa0230ae9>] try_smi_init+0x529/0x950 [ipmi_si] [ 1362.334521] [<ffffffffa022f350>] ? std_irq_setup+0xd0/0xd0 [ipmi_si] [ 1362.411701] [<ffffffffa0232bd2>] init_ipmi_si+0x492/0x9e0 [ipmi_si] [ 1362.487917] [<ffffffffa0232740>] ? ipmi_pci_probe+0x280/0x280 [ipmi_si] [ 1362.568219] [<ffffffff810021a0>] do_one_initcall+0x50/0x180 [ 1362.636109] [<ffffffff812231b2>] ? kmem_cache_alloc_trace+0x142/0x190 [ 1362.714330] [<ffffffff811b2ae1>] do_init_module+0x5f/0x200 [ 1362.781208] [<ffffffff81123ca8>] load_module+0x1898/0x1de0 [ 1362.848069] [<ffffffff811202e0>] ? __symbol_put+0x60/0x60 [ 1362.913886] [<ffffffff8130696b>] ? security_kernel_post_read_file+0x6b/0x80 [ 1362.998514] [<ffffffff81124465>] SYSC_finit_module+0xe5/0x120 [ 1363.068463] [<ffffffff81124465>] ? SYSC_finit_module+0xe5/0x120 [ 1363.140513] [<ffffffff811244be>] SyS_finit_module+0xe/0x10 [ 1363.207364] [<ffffffff81003c04>] do_syscall_64+0x74/0x180 Fixes: 50c812b2 ("[PATCH] ipmi: add full sysfs support") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Cc: Corey Minyard <minyard@acm.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: openipmi-developer@lists.sourceforge.net Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 2.6.17- Message-Id: <20200403090408.58745-1-wenyang@linux.alibaba.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 8305f72f upstream. During system resume from suspend, this can be observed on ASM1062 PMP controller: ata10.01: SATA link down (SStatus 0 SControl 330) ata10.02: hard resetting link ata10.02: SATA link down (SStatus 0 SControl 330) ata10.00: configured for UDMA/133 Kernel panic - not syncing: stack-protector: Kernel in: sata_pmp_eh_recover+0xa2b/0xa40 CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE #49-Ubuntu Hardware name: System manufacturer System Product 1001 12/10/2017 Call Trace: dump_stack+0x63/0x8b panic+0xe4/0x244 ? sata_pmp_eh_recover+0xa2b/0xa40 __stack_chk_fail+0x19/0x20 sata_pmp_eh_recover+0xa2b/0xa40 ? ahci_do_softreset+0x260/0x260 [libahci] ? ahci_do_hardreset+0x140/0x140 [libahci] ? ata_phys_link_offline+0x60/0x60 ? ahci_stop_engine+0xc0/0xc0 [libahci] sata_pmp_error_handler+0x22/0x30 ahci_error_handler+0x45/0x80 [libahci] ata_scsi_port_error_handler+0x29b/0x770 ? ata_scsi_cmd_error_handler+0x101/0x140 ata_scsi_error+0x95/0xd0 ? scsi_try_target_reset+0x90/0x90 scsi_error_handler+0xd0/0x5b0 kthread+0x121/0x140 ? scsi_eh_get_sense+0x200/0x200 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector. Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly. BugLink: https://bugs.launchpad.net/bugs/1821434 Cc: stable@vger.kernel.org Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Simon Gander authored
commit 25efb2ff upstream. When removing files containing extended attributes, the hfsplus driver may remove the wrong entries from the attributes b-tree, causing major filesystem damage and in some cases even kernel crashes. To remove a file, all its extended attributes have to be removed as well. The driver does this by looking up all keys in the attributes b-tree with the cnid of the file. Each of these entries then gets deleted using the key used for searching, which doesn't contain the attribute's name when it should. Since the key doesn't contain the name, the deletion routine will not find the correct entry and instead remove the one in front of it. If parent nodes have to be modified, these become corrupt as well. This causes invalid links and unsorted entries that not even macOS's fsck_hfs is able to fix. To fix this, modify the search key before an entry is deleted from the attributes b-tree by copying the found entry's key into the search key, therefore ensuring that the correct entry gets removed from the tree. Signed-off-by:
Simon Gander <simon@tuxera.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Anton Altaparmakov <anton@tuxera.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Oliver O'Halloran authored
commit d0a72efa upstream. The cpufreq driver has a use-after-free that we can hit if: a) There's an OCC message pending when the notifier is registered, and b) The cpufreq driver fails to register with the core. When a) occurs the notifier schedules a workqueue item to handle the message. The backing work_struct is located on chips[].throttle and when b) happens we clean up by freeing the array. Once we get to the (now free) queued item and the kernel crashes. Fixes: c5e29ea7 ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Eric Biggers authored
commit d7d27cfc upstream. Patch series "module autoloading fixes and cleanups", v5. This series fixes a bug where request_module() was reporting success to kernel code when module autoloading had been completely disabled via 'echo > /proc/sys/kernel/modprobe'. It also addresses the issues raised on the original thread (https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u) bydocumenting the modprobe sysctl, adding a self-test for the empty path case, and downgrading a user-reachable WARN_ONCE(). This patch (of 4): It's long been possible to disable kernel module autoloading completely (while still allowing manual module insertion) by setting /proc/sys/kernel/modprobe to the empty string. This can be preferable to setting it to a nonexistent file since it avoids the overhead of an attempted execve(), avoids potential deadlocks, and avoids the call to security_kernel_module_request() and thus on SELinux-based systems eliminates the need to write SELinux rules to dontaudit module_request. However, when module autoloading is disabled in this way, request_module() returns 0. This is broken because callers expect 0 to mean that the module was successfully loaded. Apparently this was never noticed because this method of disabling module autoloading isn't used much, and also most callers don't use the return value of request_module() since it's always necessary to check whether the module registered its functionality or not anyway. But improperly returning 0 can indeed confuse a few callers, for example get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit: if (!fs && (request_module("fs-%.*s", len, name) == 0)) { fs = __get_fs_type(name, len); WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name); } This is easily reproduced with: echo > /proc/sys/kernel/modprobe mount -t NONEXISTENT none / It causes: request_module fs-NONEXISTENT succeeded, but still no fs? WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0 [...] This should actually use pr_warn_once() rather than WARN_ONCE(), since it's also user-reachable if userspace immediately unloads the module. Regardless, request_module() should correctly return an error when it fails. So let's make it return -ENOENT, which matches the error when the modprobe binary doesn't exist. I've also sent patches to document and test this case. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Jessica Yu <jeyu@kernel.org> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Ben Hutchings <benh@debian.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.orgSigned-off-by:
-
Paul Cercueil authored
commit c067b46d upstream. Exit jz4770_cgu_init() if the 'cgu' pointer we get is NULL, since the pointer is passed as argument to functions later on. Fixes: 7a01c190 ("clk: Add Ingenic jz4770 CGU driver") Cc: stable@vger.kernel.org Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reported-by:
kbuild test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lkml.kernel.org/r/20200213161952.37460-1-paul@crapouillou.netSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
