configure.in 68.6 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387
dnl -*- ksh -*-
dnl Process this file with autoconf to produce a configure script.

AC_INIT(sql/mysqld.cc)
AC_CANONICAL_SYSTEM
# The Docs Makefile.am parses this line!
AM_INIT_AUTOMAKE(mysql, 4.0.2-alpha)
AM_CONFIG_HEADER(config.h)

PROTOCOL_VERSION=10
DOT_FRM_VERSION=6
# See the libtool docs for information on how to do shared lib versions.
SHARED_LIB_VERSION=11:0:0

# Set all version vars based on $VERSION. How do we do this more elegant ?
# Remember that regexps needs to quote [ and ] since this is run through m4
MYSQL_NO_DASH_VERSION=`echo $VERSION | sed -e "s|-.*$||"`
MYSQL_BASE_VERSION=`echo $MYSQL_NO_DASH_VERSION | sed -e "s|\.[[^.]]*$||"`
F_PART=`echo $MYSQL_BASE_VERSION | sed -e "s|\.||g"| sed -e "s|[a-zA-Z]\+||"|sed -e "s|^\(..\)$|\\10|"`
L_PART=`echo $MYSQL_NO_DASH_VERSION | sed -e "s|^[[0-9]]\.[[0-9]]*\.||" | sed -e "s|^\(.\)$|0\\1|" | sed -e "s|[[a-z]]||"`
MYSQL_VERSION_ID=${F_PART}${L_PART}

# The port should be constant for a LONG time
MYSQL_TCP_PORT_DEFAULT=3306
MYSQL_UNIX_ADDR_DEFAULT="/tmp/mysql.sock"

# Remember to add a directory sql/share/LANGUAGE
AVAILABLE_LANGUAGES="\
czech danish dutch english estonian french german greek hungarian \
italian japanese korean norwegian norwegian-ny polish portuguese \
romanian russian slovak spanish swedish ukrainian"

# Generate make rules for all error messages
AVAILABLE_LANGUAGES_ERRORS=
AVAILABLE_LANGUAGES_ERRORS_RULES=$srcdir/ac_available_languages_fragment
rm -f $AVAILABLE_LANGUAGES_ERRORS_RULES
for i in $AVAILABLE_LANGUAGES
do
  AVAILABLE_LANGUAGES_ERRORS="$AVAILABLE_LANGUAGES_ERRORS $i/errmsg.sys"
  echo "$i/errmsg.sys: $i/errmsg.txt
	\$(top_builddir)/extra/comp_err \$^ $i/errmsg.sys" \
    >> $AVAILABLE_LANGUAGES_ERRORS_RULES
done

#####
#####

AC_SUBST(MYSQL_NO_DASH_VERSION)
AC_SUBST(MYSQL_BASE_VERSION)
AC_SUBST(MYSQL_VERSION_ID)
AC_SUBST(PROTOCOL_VERSION)
AC_DEFINE_UNQUOTED(PROTOCOL_VERSION, $PROTOCOL_VERSION)
AC_SUBST(DOT_FRM_VERSION)
AC_DEFINE_UNQUOTED(DOT_FRM_VERSION, $DOT_FRM_VERSION)
AC_SUBST(SHARED_LIB_VERSION)
AC_SUBST(AVAILABLE_LANGUAGES)
AC_SUBST(AVAILABLE_LANGUAGES_ERRORS)
AC_SUBST_FILE(AVAILABLE_LANGUAGES_ERRORS_RULES)

# Canonicalize the configuration name.
SYSTEM_TYPE="$host_vendor-$host_os"
MACHINE_TYPE="$host_cpu"
AC_SUBST(SYSTEM_TYPE)
AC_DEFINE_UNQUOTED(SYSTEM_TYPE, "$SYSTEM_TYPE")
AC_SUBST(MACHINE_TYPE)
AC_DEFINE_UNQUOTED(MACHINE_TYPE, "$MACHINE_TYPE")

# Detect intel x86 like processor
BASE_MACHINE_TYPE=$MACHINE_TYPE
case $MACHINE_TYPE in
  i?86) BASE_MACHINE_TYPE=i386 ;;
esac

# Save some variables and the command line options for mysqlbug
SAVE_CFLAGS="$CFLAGS"
SAVE_CXXFLAGS="$CXXFLAGS"
SAVE_LDFLAGS="$LDFLAGS"
SAVE_CXXLDFLAGS="$CXXLDFLAGS"
CONF_COMMAND="$0 $ac_configure_args"
AC_SUBST(CONF_COMMAND)
AC_SUBST(SAVE_CFLAGS)
AC_SUBST(SAVE_CXXFLAGS)
AC_SUBST(SAVE_LDFLAGS)
AC_SUBST(SAVE_CXXLDFLAGS)
AC_SUBST(CXXLDFLAGS)

AC_PREREQ(2.12)dnl		Minimum Autoconf version required.

AM_MAINTAINER_MODE
#AC_ARG_PROGRAM			# Automaticly invoked by AM_INIT_AUTOMAKE
AM_SANITY_CHECK
# This is needed is SUBDIRS is set
AC_PROG_MAKE_SET
# This generates rules for webpage generation for the MySQL homepage.
AM_CONDITIONAL(LOCAL, test -d ../web/SitePages)

# This is need before AC_PROG_CC
#

if test "x${CFLAGS-}" = x ; then
  cflags_is_set=no
else
  cflags_is_set=yes
fi

if test "x${CPPFLAGS-}" = x ; then
  cppflags_is_set=no
else
  cppflags_is_set=yes
fi

if test "x${LDFLAGS-}" = x ; then
  ldflags_is_set=no
else
  ldflags_is_set=yes
fi

# The following hack should ensure that configure doesn't add optimizing
# or debugging flags to CFLAGS or CXXFLAGS
CFLAGS="$CFLAGS "
CXXFLAGS="$CXXFLAGS "

dnl Checks for programs.
AC_PROG_AWK
AC_PROG_CC
AC_PROG_CXX
AC_PROG_CPP

# Print version of CC and CXX compiler (if they support --version)
CC_VERSION=`$CC --version`
if test $? -eq "0"
then
  AC_MSG_CHECKING("C Compiler version");
  AC_MSG_RESULT("$CC $CC_VERSION")
fi
CXX_VERSION=`$CXX --version`
if test $? -eq "0"
then
  AC_MSG_CHECKING("C++ compiler version");
  AC_MSG_RESULT("$CXX $CXX_VERSION")
fi

# Fix for sgi gcc / sgiCC which tries to emulate gcc
if test "$CC" = "sgicc"
then
  ac_cv_prog_gcc="no"
fi
if test "$CXX" = "sgi++"
then
  GXX="no"
fi

if test "$ac_cv_prog_gcc" = "yes"
then
  AS="$CC -c"
  AC_SUBST(AS)
else
  AC_PATH_PROG(AS, as, as)
fi
# Still need ranlib for readline; local static use only so no libtool.
AC_PROG_RANLIB
# We use libtool
#AC_LIBTOOL_WIN32_DLL
AM_PROG_LIBTOOL

#AC_LIBTOOL_DLOPEN AC_LIBTOOL_WIN32_DLL AC_DISABLE_FAST_INSTALL AC_DISABLE_SHARED AC_DISABLE_STATIC

# AC_PROG_INSTALL
AC_PROG_INSTALL
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

# Not critical since the generated file is distributed
AC_PROG_YACC
AC_CHECK_PROG(PDFMANUAL, pdftex, manual.pdf)

AC_MSG_CHECKING("return type of sprintf")

#check the return type of sprintf
AC_TRY_RUN([
  int main()
    {
      char* s = "hello";
      char buf[6];
      if((int)sprintf(buf, s) == strlen(s))
	return 0;
      
      return -1;
     }
   ],
AC_DEFINE(SPRINTF_RETURNS_INT) AC_MSG_RESULT("int"),
 AC_TRY_RUN([
 int main()
   {
     char* s = "hello";
     char buf[6];
     if((char*)sprintf(buf,s) == buf + strlen(s))
       return 0;
     return -1;  
   }
], AC_DEFINE(SPRINTF_RETURNS_PTR) AC_MSG_RESULT("ptr"),
 AC_DEFINE(SPRINTF_RETURNS_GARBAGE) AC_MSG_RESULT("garbage")))
   	

# option, cache_name, variable,
# code to execute if yes, code to exectute if fail
AC_DEFUN(AC_SYS_COMPILER_FLAG,
[
  AC_MSG_CHECKING($1)
  OLD_CFLAGS="[$]CFLAGS"
  AC_CACHE_VAL(mysql_cv_option_$2,
  [
    CFLAGS="[$]OLD_CFLAGS $1"
    AC_TRY_RUN([int main(){exit(0);}],mysql_cv_option_$2=yes,mysql_cv_option_$2=no,mysql_cv_option_$2=no)
 ])

  CFLAGS="[$]OLD_CFLAGS"
  
  if test x"[$]mysql_cv_option_$2" = "xyes" ; then
    $3="[$]$3 $1"
    AC_MSG_RESULT(yes)
    $5
  else
    AC_MSG_RESULT(no)
    $4
  fi
])

# arch, option, cache_name, variable
AC_DEFUN(AC_SYS_CPU_COMPILER_FLAG,
[
 if test "`uname -m 2>/dev/null`" = "$1" ; then
    AC_SYS_COMPILER_FLAG($2,$3,$4)
 fi
])

# os, option, cache_name, variable
AC_DEFUN(AC_SYS_OS_COMPILER_FLAG,
[
 if test "x$mysql_cv_sys_os" = "x$1" ; then
    AC_SYS_COMPILER_FLAG($2,$3,$4)
 fi
])

# We need some special hacks when running slowaris
AC_PATH_PROG(uname_prog, uname, no)

# We should go through this and put all the explictly system dependent
# stuff in one place
AC_MSG_CHECKING(operating system)
AC_CACHE_VAL(mysql_cv_sys_os,
[
if test "$uname_prog" != "no"; then
  mysql_cv_sys_os="`uname`"
else
  mysql_cv_sys_os="Not Solaris"
fi
])
AC_MSG_RESULT($mysql_cv_sys_os)

# This should be rewritten to use $target_os
case "$target_os" in
  sco3.2v5*) 
     CFLAGS="$CFLAGS -DSCO"
     CXXFLAGS="$CXXFLAGS -DSCO"
     LD='$(CC) $(CFLAGS)'
     case "$CFLAGS" in
       *-belf*) 
         AC_SYS_COMPILER_FLAG(-belf,sco_belf_option,CFLAGS,[],[
         case "$LDFLAGS" in
           *-belf*) ;;
           *) echo "Adding -belf option to ldflags."
              LDFLAGS="$LDFLAGS -belf"
           ;;
         esac
         ])
       ;;
       *)
         AC_SYS_COMPILER_FLAG(-belf,sco_belf_option,CFLAGS,[],[
         case "$LDFLAGS" in
           *-belf*) ;;
           *)
	     echo "Adding -belf option to ldflags."
             LDFLAGS="$LDFLAGS -belf"
           ;;
         esac
         ])
       ;;
     esac
  ;;
  sysv5UnixWare*) 
    if test "$GCC" != "yes"; then
      # We are using built-in inline function
      CFLAGS="$CFLAGS -Kalloca"
    fi
    CXXFLAGS="$CXXFLAGS -DNO_CPLUSPLUS_ALLOCA"
  ;;
  sysv5OpenUNIX8*) 
    if test "$GCC" != "yes"; then
      # We are using built-in inline function
      CFLAGS="$CFLAGS -Kalloca"
    fi
    CXXFLAGS="$CXXFLAGS -DNO_CPLUSPLUS_ALLOCA"
  ;;
esac
AC_SUBST(CC)
AC_SUBST(CFLAGS)
AC_SUBST(CXX)
AC_SUBST(CXXFLAGS)
AC_SUBST(LD)
AC_SUBST(INSTALL_SCRIPT)

export CC CFLAGS LD LDFLAGS

if test "$GXX" = "yes"
then
  # mysqld requires -fno-implicit-templates.
  # Disable exceptions as they seams to create problems with gcc and threads.
  # mysqld doesn't use run-time-type-checking, so we disable it.
  CXXFLAGS="$CXXFLAGS -fno-implicit-templates -fno-exceptions -fno-rtti"

  # If you are using 'gcc' 3.0 (not g++) to compile C++ programs,
  # we will gets some problems when linking static programs.
  # The following code is used to fix this problem.

  if test "$CXX" = "gcc"
  then
    if $CXX -v 2>&1 | grep 'version 3' > /dev/null 2>&1
    then
      CXXFLAGS="$CXXFLAGS -DUSE_MYSYS_NEW"
      CXXLDFLAGS="$CXXLDFLAGS -Wl,--defsym -Wl,__cxa_pure_virtual=0"
    fi
  fi
fi

# Avoid bug in fcntl on some versions of linux
AC_MSG_CHECKING("if we should use 'skip-locking' as default for $target_os")
# Any wariation of Linux
if expr "$target_os" : "[[Ll]]inux.*" > /dev/null
then
  MYSQLD_DEFAULT_SWITCHES="--skip-locking"
  IS_LINUX="true"
  AC_MSG_RESULT("yes");
else
  MYSQLD_DEFAULT_SWITCHES=""
  IS_LINUX="false"
  AC_MSG_RESULT("no");
fi
AC_SUBST(MYSQLD_DEFAULT_SWITCHES)
AC_SUBST(IS_LINUX)

dnl Find paths to some shell programs
AC_PATH_PROG(LN, ln, ln)
# This must be able to take a -f flag like normal unix ln.
AC_PATH_PROG(LN_CP_F, ln, ln)
# If ln -f does not exists use -s (AFS systems)
if test -n "$LN_CP_F"; then
  LN_CP_F="$LN_CP_F -s"
fi

AC_PATH_PROG(MV, mv, mv)
AC_PATH_PROG(RM, rm, rm)
AC_PATH_PROG(CP, cp, cp)
AC_PATH_PROG(SED, sed, sed)
AC_PATH_PROG(CMP, cmp, cmp)
AC_PATH_PROG(CHMOD, chmod, chmod)
AC_PATH_PROG(HOSTNAME, hostname, hostname)
# Check for a GNU tar named 'gtar', or 'gnutar' (MacOS X) and
# fall back to 'tar' otherwise and hope that it's a GNU tar as well
AC_CHECK_PROGS(TAR, gnutar gtar tar)
dnl We use a path for perl so the script startup works
dnl We make sure to use perl, not perl5, in hopes that the RPMs will
dnl not depend on the perl5 binary being installed (probably a bug in RPM)
AC_PATH_PROG(PERL, perl, no)
if test "$PERL" != "no" && $PERL -e 'require 5' > /dev/null 2>&1
then
  PERL5=$PERL
else
  AC_PATH_PROG(PERL5, perl5, no)
  if test "$PERL5" != no
  then
    PERL=$PERL5
    ac_cv_path_PERL=$ac_cv_path_PERL5
  fi
fi

AC_SUBST(HOSTNAME)
AC_SUBST(PERL)
AC_SUBST(PERL5)

# Lock for PS
AC_PATH_PROG(PS, ps, ps)
AC_MSG_CHECKING("how to check if pid exists")
PS=$ac_cv_path_PS
# Linux style
if $PS p $$ 2> /dev/null | grep $0 > /dev/null
then
  FIND_PROC="$PS p \$\$PID | grep mysqld > /dev/null"
# Solaris
elif $PS -p $$ 2> /dev/null | grep $0 > /dev/null
then
  FIND_PROC="$PS -p \$\$PID | grep mysqld > /dev/null"
# BSD style
elif $PS -uaxww 2> /dev/null | grep $0 > /dev/null
then
  FIND_PROC="$PS -uaxww | grep mysqld | grep \" \$\$PID \" > /dev/null"
# SysV style
elif $PS -ef 2> /dev/null | grep $0 > /dev/null
then
  FIND_PROC="$PS -ef | grep mysqld | grep \" \$\$PID \" > /dev/null"
# Do anybody use this?
elif $PS $$ 2> /dev/null | grep $0 > /dev/null
then
  FIND_PROC="$PS \$\$PID | grep mysqld > /dev/null"
else
  case $SYSTEM_TYPE in
    *darwin*)
      FIND_PROC="$PS -uaxww | grep mysqld | grep \" \$\$PID \" > /dev/null"
      ;;
    *cygwin*)
      FIND_PROC="$PS -e | grep mysqld | grep \" \$\$PID \" > /dev/null"
      ;;
    *)
      AC_MSG_ERROR([Could not find the right ps switches. Which OS is this ?. See the Installation chapter in the Reference Manual.])
  esac
fi
AC_SUBST(FIND_PROC)
AC_MSG_RESULT("$FIND_PROC")

# Check if a pid is valid
AC_PATH_PROG(KILL, kill, kill)
AC_MSG_CHECKING("for kill switches")
if $ac_cv_path_KILL -0 $$
then
  CHECK_PID="$ac_cv_path_KILL -0 \$\$PID > /dev/null 2> /dev/null"
elif kill -s 0 $$
then
  CHECK_PID="$ac_cv_path_KILL -s 0 \$\$PID > /dev/null 2> /dev/null"
else
  AC_MSG_WARN([kill -0 to check for pid seems to fail])
    CHECK_PID="$ac_cv_path_KILL -s SIGCONT \$\$PID > /dev/null 2> /dev/null"
fi
AC_SUBST(CHECK_PID)
AC_MSG_RESULT("$CHECK_PID")

# We need a ANSI C compiler
AM_PROG_CC_STDC

if test "$am_cv_prog_cc_stdc" = "no"
then
  AC_MSG_ERROR([MySQL requires a ANSI C compiler (and a C++ compiler). Try gcc. See the Installation chapter in the Reference Manual.])
fi

NOINST_LDFLAGS=

AC_ARG_WITH(other-libc,
 [ --with-other-libc=/path/to/other/libc/dir Link against libc and other standard libraries installed in the specified non-standard location overriding default. Originally added to be able to link against glibc 2.2 without making the user upgrade the standard libc installation ],
 [
   other_libc_include="$withval/include"
   other_libc_lib="$withval/lib"
   with_other_libc="yes"
   enable_shared="no"
   all_is_static="yes"
   CFLAGS="$CFLAGS -I$other_libc_include"
   # There seems to be a feature in gcc that treats system and libc headers
   # silently when they violatate ANSI C++ standard, but it is strict otherwise
   # since gcc cannot now recognize that our headers are libc, we work around
   # by telling it to be permissive. Note that this option only works with
   # new versions of gcc (2.95.x and above)
   CXXFLAGS="$CXXFLAGS -fpermissive -I$other_libc_include"
   static_nss=
   if test -f "$other_libc_lib/libnss_files.a"
   then
     # libc has been compiled with --enable-static-nss
     # we need special flags, but we will have to add those later
     STATIC_NSS_FLAGS="-Wl,--start-group -lc -lnss_files -lnss_dns -lresolv \
  -Wl,--end-group"
     static_nss=1
   else
     # this is a dirty hack. We if we detect static nss glibc in the special
     # location, we do not re-direct the linker to get libraries from there
     # during check. The reason is that if we did, we would have to find a
     # way to append the special static nss flags to LIBS every time we do
     # any check - this is definitely feasible, but not worthwhile the risk
     # of breaking other things. So for our purposes it would be sufficient
     # to assume that whoever is using static NSS knows what he is doing and
     # has sensible libraries in the regular location
     LDFLAGS="$LDFLAGS -static -L$other_libc_lib "
   fi
   
   # When linking against custom libc installed separately, we want to force
   # all binary builds to be static, including the build done by configure
   # itself to test for system features.
   with_mysqld_ldflags="-all-static"
   with_client_ldflags="-all-static"
   NOINST_LDFLAGS="-all-static"
 ],
 [
  other_libc_include=
  other_libc_lib=
  with_other_libc="no"
 ]
)
AC_SUBST(NOINST_LDFLAGS)

AC_ARG_WITH(server-suffix,
    [  --with-server-suffix    Append value to the version string.],
    # I heard that 'cut' isn't portable.  Isn't there a better way?
    [ MYSQL_SERVER_SUFFIX=`echo "$withval" | sed -e  's/^\(...................................\)..*$/\1/'` ],
    [ MYSQL_SERVER_SUFFIX= ]
    )
AC_SUBST(MYSQL_SERVER_SUFFIX)

# Set flags if we wants to have MIT threads.
AC_ARG_WITH(mit-threads,
    [  --with-mit-threads      Always use included thread lib.],
    [ with_mit_threads=$withval ],
    [ with_mit_threads=no ]
    )

if test "$with_mit_threads" = "yes"
then
  enable_largefile="no"		# Will not work on Linux.
fi

# Set flags if we want to force to use pthreads
AC_ARG_WITH(pthread,
    [  --with-pthread          Force use of pthread library.],
    [ with_pthread=$withval ],
    [ with_pthread=no ]
    )

# Force use of thread libs LIBS
AC_ARG_WITH(named-thread-libs,
    [  --with-named-thread-libs=ARG
                          Use specified thread libraries instead of 
                          those automatically found by configure.],
    [ with_named_thread=$withval ],
    [ with_named_thread=no ]
    )

# Force use of a curses libs
AC_ARG_WITH(named-curses-libs,
    [  --with-named-curses-libs=ARG
                          Use specified curses libraries instead of 
                          those automatically found by configure.],
    [ with_named_curses=$withval ],
    [ with_named_curses=no ]
    )

# Force use of a zlib (compress)
AC_ARG_WITH(named-z-libs,
    [  --with-named-z-libs=ARG
                          Use specified zlib libraries instead of
                          those automatically found by configure.],
    [ with_named_zlib=$withval ],
    [ with_named_zlib=z ]
    )

# Make thread safe client
AC_ARG_ENABLE(thread-safe-client,
    [  --enable-thread-safe-client   
                          Compile the client with threads.],
    [ THREAD_SAFE_CLIENT=$enableval ],
    [ THREAD_SAFE_CLIENT=no ]
    )

# compile with strings functions in assembler
AC_ARG_ENABLE(assembler,
    [  --enable-assembler      Use assembler versions of some string 
                          functions if available.],
    [ ENABLE_ASSEMBLER=$enableval ],
    [ ENABLE_ASSEMBLER=no ]
    )

AC_MSG_CHECKING(if we should use assembler functions)
# For now we only support assembler on i386 and sparc systems
AM_CONDITIONAL(ASSEMBLER_x86, test "$ENABLE_ASSEMBLER" = "yes" -a "$BASE_MACHINE_TYPE" = "i386")
AM_CONDITIONAL(ASSEMBLER_sparc, test "$ENABLE_ASSEMBLER" = "yes" -a "$BASE_MACHINE_TYPE" = "sparc")
AM_CONDITIONAL(ASSEMBLER, test "$ASSEMBLER_x86_TRUE" = "" -o "$ASSEMBLER_sparc_TRUE" = "")

if test "$ASSEMBLER_TRUE" = ""
then
  AC_MSG_RESULT([yes])
else
  AC_MSG_RESULT([no])
fi


AC_MSG_CHECKING(if we should use RAID)
AC_ARG_WITH(raid,
    [  --with-raid             Enable RAID Support],
    [   USE_RAID=$withval ],
    [   USE_RAID=no ]
    )
if test "$USE_RAID" = "yes"
then
  AC_MSG_RESULT([yes])
  AC_DEFINE([USE_RAID])
else
  AC_MSG_RESULT([no])
fi

# Use this to set the place used for unix socket used to local communication.
AC_ARG_WITH(unix-socket-path,
    [  --with-unix-socket-path=SOCKET
                          Where to put the unix-domain socket.  SOCKET must be 
                          an absolute file name.],
    [ MYSQL_UNIX_ADDR=$withval ],
    [ MYSQL_UNIX_ADDR=$MYSQL_UNIX_ADDR_DEFAULT ]
    )
AC_SUBST(MYSQL_UNIX_ADDR)

AC_ARG_WITH(tcp-port,
    [  --with-tcp-port=port-number
                          Which port to use for MySQL services (default 3306)],
    [ MYSQL_TCP_PORT=$withval ],
    [ MYSQL_TCP_PORT=$MYSQL_TCP_PORT_DEFAULT ]
    )
AC_SUBST(MYSQL_TCP_PORT)
# We might want to document the assigned port in the manual.
AC_SUBST(MYSQL_TCP_PORT_DEFAULT)

# Use this to set the place used for unix socket used to local communication.
AC_ARG_WITH(mysqld-user,
    [  --with-mysqld-user=username   
                          What user the mysqld daemon shall be run as.],
    [ MYSQLD_USER=$withval ],
    [ MYSQLD_USER=mysql ]
    )
AC_SUBST(MYSQLD_USER)

# If we should allove LOAD DATA LOCAL
AC_MSG_CHECKING(if we should should enable LOAD DATA LOCAL by default)
AC_ARG_ENABLE(local-infile,
    [  --enable-local-infile
                          Enable LOAD DATA LOCAL INFILE (default: disabled)],
    [ ENABLED_LOCAL_INFILE=$enableval ],
    [ ENABLED_LOCAL_INFILE=no ]
    )
if test "$ENABLED_LOCAL_INFILE" = "yes"
then
  AC_MSG_RESULT([yes])
  AC_DEFINE([ENABLED_LOCAL_INFILE])
else
  AC_MSG_RESULT([no])
fi

# Use Paul Eggerts macros from GNU tar to check for large file support.
MYSQL_SYS_LARGEFILE

# Types that must be checked AFTER large file support is checked
AC_TYPE_SIZE_T

#--------------------------------------------------------------------
# Check for system header files
#--------------------------------------------------------------------

AC_HEADER_DIRENT
AC_HEADER_STDC
AC_HEADER_SYS_WAIT
AC_CHECK_HEADERS(fcntl.h float.h floatingpoint.h ieeefp.h limits.h \
 memory.h pwd.h select.h \
 stdlib.h stddef.h \
 strings.h string.h synch.h sys/mman.h sys/socket.h netinet/in.h arpa/inet.h \
 sys/timeb.h sys/types.h sys/un.h sys/vadvise.h sys/wait.h term.h \
 unistd.h utime.h sys/utime.h termio.h termios.h sched.h crypt.h alloca.h \
 sys/ioctl.h)

#--------------------------------------------------------------------
# Check for system libraries. Adds the library to $LIBS
# and defines HAVE_LIBM etc
#--------------------------------------------------------------------

AC_CHECK_LIB(m, floor, [], AC_CHECK_LIB(m, __infinity))

AC_CHECK_LIB(nsl_r, gethostbyname_r, [],
  AC_CHECK_LIB(nsl, gethostbyname_r))
AC_CHECK_FUNC(gethostbyname_r)

AC_CHECK_FUNC(setsockopt, , AC_CHECK_LIB(socket, setsockopt))
AC_CHECK_FUNC(yp_get_default_domain, ,
  AC_CHECK_LIB(nsl, yp_get_default_domain))
AC_CHECK_FUNC(p2open, , AC_CHECK_LIB(gen, p2open))
# This may get things to compile even if bind-8 is installed
AC_CHECK_FUNC(bind, , AC_CHECK_LIB(bind, bind))
# For crypt() on Linux
AC_CHECK_LIB(crypt, crypt)
AC_CHECK_FUNC(crypt, AC_DEFINE(HAVE_CRYPT)) 

# For compress in zlib
MYSQL_CHECK_ZLIB_WITH_COMPRESS($with_named_zlib)

#--------------------------------------------------------------------
# Check for TCP wrapper support
#--------------------------------------------------------------------

AC_ARG_WITH(libwrap,
[  --with-libwrap[=DIR]    Compile in libwrap (tcp_wrappers) support],[
  case "$with_libwrap" in
  no) : ;;
  yes|*)
    _cppflags=${CPPFLAGS}
    _ldflags=${LDFLAGS}

    if test "$with_libwrap" != "yes"; then
      CPPFLAGS="${CPPFLAGS} -I$with_libwrap/include"
      LDFLAGS="${LDFLAGS} -L$with_libwrap/lib"
    fi

    _libs=${LIBS}
    AC_CHECK_HEADER(tcpd.h,
      LIBS="$LIBS -lwrap"
      AC_MSG_CHECKING(for TCP wrappers library -lwrap)
      AC_TRY_LINK([#include <tcpd.h>
int allow_severity = 0;
int deny_severity  = 0;

struct request_info *req;
],[hosts_access (req)],
        AC_MSG_RESULT(yes)
        AC_DEFINE(LIBWRAP)
        AC_DEFINE(HAVE_LIBWRAP)
	if test "$with_libwrap" != "yes"; then
	    WRAPLIBS="-L${with_libwrap}/lib"
	fi
	WRAPLIBS="${WRAPLIBS} -lwrap",
        AC_MSG_RESULT(no)
        CPPFLAGS=${_cppflags} LDFLAGS=${_ldflags}),
      CPPFLAGS=${_cppflags} LDFLAGS=${_ldflags})
    LDFLAGS=${_ldflags} LIBS=${_libs}
    ;;
  esac
])
AC_SUBST(WRAPLIBS)

if test "$IS_LINUX" = "true"; then
  AC_MSG_CHECKING([for atomic operations])

  atom_ops=
  AC_TRY_RUN([
#include <asm/atomic.h>
int main()
{
  atomic_t v;

  atomic_set(&v, 23);
  atomic_add(5, &v);
  return atomic_read(&v) == 28 ? 0 : -1;
}
  ], AC_DEFINE(HAVE_ATOMIC_ADD) atom_ops="${atom_ops}atomic_add ",
  )
  AC_TRY_RUN([
#include <asm/atomic.h>
int main()
{
  atomic_t v;

  atomic_set(&v, 23);
  atomic_sub(5, &v);
  return atomic_read(&v) == 18 ? 0 : -1;
}
  ], AC_DEFINE(HAVE_ATOMIC_SUB) atom_ops="${atom_ops}atomic_sub ",
  )

  if test -z "$atom_ops"; then atom_ops="no"; fi
  AC_MSG_RESULT($atom_ops)

  AC_ARG_WITH(pstack,
    [  --with-pstack           Use the pstack backtrace library],
    [ USE_PSTACK=$withval ],
    [ USE_PSTACK=no ])
  pstack_libs=
  pstack_dirs=
  if test "$USE_PSTACK" = yes -a "$IS_LINUX" = "true" -a "$BASE_MACHINE_TYPE" = "i386" -a "$with_mit_threads" = "no"
  then
    have_libiberty= have_libbfd=
    my_save_LIBS="$LIBS"
dnl I have no idea if this is a good test - can not find docs for libiberty  
    AC_CHECK_LIB([iberty], [fdmatch],
      [have_libiberty=yes
       AC_CHECK_LIB([bfd], [bfd_openr], [have_libbfd=yes], , [-liberty])])
    LIBS="$my_save_LIBS"

    if test x"$have_libiberty" = xyes -a x"$have_libbfd" = xyes
    then
      pstack_dirs='$(top_srcdir)'/pstack
      pstack_libs="../pstack/libpstack.a -lbfd -liberty"
      # We must link staticly when using pstack
      with_mysqld_ldflags="-all-static"
      AC_SUBST([pstack_dirs])
      AC_SUBST([pstack_libs])
      AC_DEFINE([USE_PSTACK])
dnl This check isn't needed, but might be nice to give some feedback....
dnl    AC_CHECK_HEADER(libiberty.h,
dnl      have_libiberty_h=yes,
dnl      have_libiberty_h=no)
    else
      USE_PSTACK="no"
    fi
  else
    USE_PSTACK="no"
  fi
fi
AM_CONDITIONAL(COMPILE_PSTACK, test "$USE_PSTACK" = "yes")
AC_MSG_CHECKING([if we should use pstack])
AC_MSG_RESULT([$USE_PSTACK])

# Check for gtty if termio.h doesn't exists
if test "$ac_cv_header_termio_h" = "no" -a "$ac_cv_header_termios_h" = "no"
then
  AC_CHECK_FUNC(gtty, , AC_CHECK_LIB(compat, gtty))
fi
# We make a special variable for client library's to avoid including
# thread libs in the client.
NON_THREADED_CLIENT_LIBS="$LIBS"

AC_MSG_CHECKING([for int8])
AC_TRY_RUN([
#ifdef HAVE_STDLIB_H
#include <stdlib.h>
#endif

#ifdef HAVE_STDDEF_H
#include <stddef.h>
#endif

#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif

int main()
{
  int8 i;
  return 0;
}
], AC_DEFINE(HAVE_INT_8_16_32) AC_MSG_RESULT([yes]), AC_MSG_RESULT([no])
)

#
# Some system specific hacks
#

MAX_C_OPTIMIZE="-O3"

case $SYSTEM_TYPE in
  *solaris2.7*)
    # Solaris 2.7 has a broken /usr/include/widec.h
    # Make a fixed copy in ./include
    echo "Fixing broken include files for $SYSTEM_TYPE"
    echo "  - Creating local copy of widec.h"
    if test ! -d include
    then
      mkdir ./include
    fi
    builddir=`pwd`
    sed -e "s|^#if[ 	]*!defined(lint) && !defined(__lint)|#if !defined\(lint\) \&\& !defined\(__lint\) \&\& !defined\(getwc\)|" < /usr/include/widec.h > include/widec.h
    CFLAGS="$CFLAGS -DHAVE_CURSES_H -I$builddir/include -DHAVE_RWLOCK_T"
    CXXFLAGS="$CXXFLAGS -DHAVE_CURSES_H -I$builddir/include -DHAVE_RWLOCK_T"
    ;;
  *solaris2.8*)
    # Solaris 2.8 has a broken /usr/include/widec.h
    # Make a fixed copy in ./include
    echo "Fixing broken include files for $SYSTEM_TYPE"
    echo "  - Creating local copy of widec.h"
    if test ! -d include
    then
      mkdir ./include
    fi
    builddir=`pwd`
    sed -e "s|^#if[ 	]*!defined(__lint)|#if !defined\(__lint\) \&\& !defined\(getwc\)|" < /usr/include/widec.h > include/widec.h
    CFLAGS="$CFLAGS -DHAVE_CURSES_H -I$builddir/include -DHAVE_RWLOCK_T"
    CXXFLAGS="$CXXFLAGS -DHAVE_CURSES_H -I$builddir/include -DHAVE_RWLOCK_T"
    ;;
  *solaris2.5.1*)
    echo "Enabling getpass() workaround for Solaris 2.5.1"
    CFLAGS="$CFLAGS -DHAVE_BROKEN_GETPASS -DSOLARIS -DHAVE_RWLOCK_T";
    CXXFLAGS="$CXXFLAGS -DHAVE_RWLOCK_T -DSOLARIS"
    ;;
  *solaris*)
    CFLAGS="$CFLAGS -DHAVE_RWLOCK_T"
    CXXFLAGS="$CXXFLAGS -DHAVE_RWLOCK_T"
    ;;
  *SunOS*)
    echo "Enabling getpass() workaround for SunOS"
    CFLAGS="$CFLAGS -DHAVE_BROKEN_GETPASS -DSOLARIS";
    ;;
  *hpux10.20*)
    echo "Enabling workarounds for hpux 10.20"
    CFLAGS="$CFLAGS -DHAVE_BROKEN_SNPRINTF -DSIGNALS_DONT_BREAK_READ -DDO_NOT_REMOVE_THREAD_WRAPPERS -DHPUX -DSIGNAL_WITH_VIO_CLOSE -DHAVE_BROKEN_PTHREAD_COND_TIMEDWAIT"
    CXXFLAGS="$CXXFLAGS -DHAVE_BROKEN_SNPRINTF -D_INCLUDE_LONGLONG -DSIGNALS_DONT_BREAK_READ -DDO_NOT_REMOVE_THREAD_WRAPPERS -DHPUX -DSIGNAL_WITH_VIO_CLOSE -DHAVE_BROKEN_PTHREAD_COND_TIMEDWAIT"
    if test "$with_named_thread" = "no"
    then 
      echo "Using --with-named-thread=-lpthread"
      with_named_thread="-lcma"
    fi
    ;;
  *hpux11.*)
    echo "Enabling workarounds for hpux 11"
    CFLAGS="$CFLAGS -DHAVE_BROKEN_PREAD -DDONT_USE_FINITE -DHAVE_BROKEN_GETPASS -DNO_FCNTL_NONBLOCK -DDO_NOT_REMOVE_THREAD_WRAPPERS -DHAVE_BROKEN_PTHREAD_COND_TIMEDWAIT"
    CXXFLAGS="$CXXFLAGS -DHAVE_BROKEN_PREAD -DDONT_USE_FINITE -D_INCLUDE_LONGLONG -DNO_FCNTL_NONBLOCK -DDO_NOT_REMOVE_THREAD_WRAPPERS -DHAVE_BROKEN_PTHREAD_COND_TIMEDWAIT"
    if test "$with_named_thread" = "no"
    then 
      echo "Using --with-named-thread=-lpthread"
      with_named_thread="-lpthread"
    fi
    ;;
  *rhapsody*)
    if test "$ac_cv_prog_gcc" = "yes"
    then
      CPPFLAGS="$CPPFLAGS -traditional-cpp "
      CFLAGS="-DHAVE_CTHREADS_WRAPPER -DDO_NOT_REMOVE_THREAD_WRAPPERS"
      CXXFLAGS="-DHAVE_CTHREADS_WRAPPER"
      if test $with_named_curses = "no"
      then
	with_named_curses=""
      fi
    fi
    ;;
  *darwin*)
    if test "$ac_cv_prog_gcc" = "yes"
    then
      CFLAGS="$CFLAGS -traditional-cpp -DHAVE_DARWIN_THREADS -D_P1003_1B_VISIBLE -DSIGNAL_WITH_VIO_CLOSE -DSIGNALS_DONT_BREAK_READ"
      CXXFLAGS="$CXXFLAGS -traditional-cpp -DHAVE_DARWIN_THREADS -D_P1003_1B_VISIBLE -DSIGNAL_WITH_VIO_CLOSE -DSIGNALS_DONT_BREAK_READ"
      MAX_C_OPTIMIZE="-O"
      with_named_curses=""
    fi
    ;;
  *freebsd*)
    echo "Adding fix for interrupted reads"
    CXXFLAGS="$CXXFLAGS -DMYSQLD_NET_RETRY_COUNT=1000000"
    ;;
  *netbsd*)
    echo "Adding flag -Dunix"
    CFLAGS="$CFLAGS -Dunix"
    CXXFLAGS="$CXXFLAGS -Dunix"
    OVERRIDE_MT_LD_ADD="\$(top_srcdir)/mit-pthreads/obj/libpthread.a"
    ;;
  *bsdi*)
    echo "Adding fix for BSDI"
    CFLAGS="$CFLAGS -D__BSD__ -DHAVE_BROKEN_REALPATH"
    AC_DEFINE_UNQUOTED(SOCKOPT_OPTLEN_TYPE, size_t)
    ;;
   *sgi-irix6*)
    if test "$with_named_thread" = "no"
    then 
      echo "Using --with-named-thread=-lpthread"
      with_named_thread="-lpthread"
    fi
    CXXFLAGS="-D_BOOL"
    ;;
    *aix4.3*)
      echo "Adding defines for AIX"
      CFLAGS="$CFLAGS -Wa,-many -DUNDEF_HAVE_INITGROUPS -DSIGNALS_DONT_BREAK_READ"
      CXXFLAGS="$CXXFLAGS -Wa,-many -DUNDEF_HAVE_INITGROUPS -DSIGNALS_DONT_BREAK_READ"
    ;;
dnl Is this the right match for DEC OSF on alpha?
    *dec-osf*)
      if test "$ac_cv_prog_gcc" = "yes" && test "$host_cpu" = "alpha"
      then
	  echo "Adding defines for DEC OSF on alpha"
	  CFLAGS="$CFLAGS -mieee"
	  CXXFLAGS="$CXXFLAGS -mieee"
      fi
    ;;
esac


#---START: Used in for client configure
# Check if we threads are in libc or if we should use
# -lpthread, -lpthreads or mit-pthreads
# We have to check libc last because else it fails on Solaris 2.6

with_posix_threads="no"
# Hack for DEC-UNIX (OSF1)
if test "$with_named_thread" = "no" -a "$with_mit_threads" = "no"
then
  # Look for LinuxThreads.
  AC_MSG_CHECKING("LinuxThreads")
    res=`grep Linuxthreads /usr/include/pthread.h 2>/dev/null | wc -l`
    if test "$res" -gt 0
    then
      AC_MSG_RESULT("Found")
      AC_DEFINE(HAVE_LINUXTHREADS)
      # Linux 2.0 sanity check
      AC_TRY_COMPILE([#include <sched.h>], [int a = sched_get_priority_min(1);], ,
      AC_MSG_ERROR([Syntax error in sched.h. Change _P to __P in the /usr/include/sched.h file. See the Installation chapter in the Reference Manual]))
      # RedHat 5.0 does not work with dynamic linking of this. -static also
      # gives a speed increase in linux so it does not hurt on other systems.
      with_named_thread="-lpthread"
    else
      AC_MSG_RESULT("Not found")
      # If this is a linux machine we should barf
      if test "$IS_LINUX" = "true"
      then
	AC_MSG_ERROR([This is a linux system and Linuxthreads was not
found. On linux Linuxthreads should be used. So install Linuxthreads
(or a new glibc) and try again. See the Installation chapter in the
Reference Manual.])
      else
	AC_MSG_CHECKING("DEC threads")
        if test -f /usr/shlib/libpthread.so -a -f /usr/lib/libmach.a -a -f /usr/ccs/lib/cmplrs/cc/libexc.a
	then
	  with_named_thread="-lpthread -lmach -lexc"
	  CFLAGS="$CFLAGS -D_REENTRANT"
	  CXXFLAGS="$CXXFLAGS -D_REENTRANT"
	  AC_DEFINE(HAVE_DEC_THREADS)
	  AC_MSG_RESULT("yes")
	else
	  AC_MSG_RESULT("no")
	  AC_MSG_CHECKING("DEC 3.2 threads")
          if test -f /usr/shlib/libpthreads.so -a -f /usr/lib/libmach.a -a -f /usr/ccs/lib/cmplrs/cc/libexc.a
	  then
	    with_named_thread="-lpthreads -lmach -lc_r"
	    AC_DEFINE(HAVE_DEC_THREADS)
	    AC_DEFINE(HAVE_DEC_3_2_THREADS)
            with_osf32_threads="yes"
            MYSQLD_DEFAULT_SWITCHES="--skip-thread-priority"
	    AC_MSG_RESULT("yes")
	  else
	    AC_MSG_RESULT("no")
          fi
	fi
     fi
   fi
fi


dnl This is needed because -lsocket has to come after the thread
dnl library on SCO.
AC_DEFUN([MYSQL_REMOVE_SOCKET_FROM_LIBS_HACK], [
  LIBS=`echo " $LIBS " | sed -e 's/ -lsocket / /g'`
])
# Hack for SCO UNIX
if test "$with_named_thread" = "no"
then
  AC_MSG_CHECKING("SCO threads")
  if expr "$SYSTEM_TYPE" : ".*sco.*" > /dev/null
  then
    if test -f /usr/lib/libgthreads.a -o -f /usr/lib/libgthreads.so
    then
      MYSQL_REMOVE_SOCKET_FROM_LIBS_HACK
      with_named_thread="-lgthreads -lsocket -lgthreads"
      # sched.h conflicts with fsu-threads
      touch ./include/sched.h

      # We must have gcc
      if expr "$CC" : ".*gcc.*"
      then
	AC_MSG_RESULT("yes")
      else
	AC_MSG_ERROR([On SCO UNIX MySQL must be compiled with gcc. See the Installation chapter in the Reference Manual.]);
      fi
      AC_MSG_RESULT("yes")
    elif test -f /usr/local/lib/libpthread.a -o -f /usr/local/lib/libpthread.so
    then
      MYSQL_REMOVE_SOCKET_FROM_LIBS_HACK
      with_named_thread="-lpthread -lsocket"
      # sched.h conflicts with fsu-threads
      # touch ./include/sched.h

      AC_MSG_CHECKING("for gcc")
      # We must have gcc
      if expr "$CC" : ".*gcc.*"
      then
	AC_MSG_RESULT("yes")
      else
	AC_MSG_ERROR([On SCO UNIX MySQL must be compiled with gcc. See the Installation chapter in the Reference Manual.]);
      fi
      AC_MSG_RESULT("yes")
    # Hack for SCO UnixWare 7.1
    #
    elif test "$with_named_thread" = "no"
    then
      AC_MSG_RESULT("no")
      AC_MSG_CHECKING("SCO UnixWare 7.1 native threads")
      if expr "$SYSTEM_TYPE" : ".*sco.*" > /dev/null
      then
        if test -f /usr/lib/libthread.so -o -f /usr/lib/libthreadT.so
        then
	  MYSQL_REMOVE_SOCKET_FROM_LIBS_HACK
          if expr "$CC" : ".*gcc.*"
          then
            with_named_thread="-pthread -lsocket -lnsl"
          else
            with_named_thread="-Kthread -lsocket -lnsl"
          fi
          if expr "$SYSTEM_TYPE" : ".*unixware7.0.0" > /dev/null
          then
            AC_DEFINE(HAVE_UNIXWARE7_THREADS)
          else
            AC_DEFINE(HAVE_UNIXWARE7_POSIX)
          fi
          AC_MSG_RESULT("yes")
          # We must have cc
          AC_MSG_CHECKING("for gcc")
          if expr "$CC" : ".*gcc.*"
          then
	    CC="$CC -pthread -DUNIXWARE_7";
	    CXX="$CXX -pthread -DUNIXWARE_7";
          else
	    CC="$CC -Kthread -DUNIXWARE_7";
	    CXX="$CXX -Kthread -DUNIXWARE_7";
          fi
        else
          { echo "configure: error: Can't find thread libs on SCO UnixWare7. See the Installation chapter in the Reference Manual." 1>&2; exit 1; };
        fi
      else
        AC_MSG_RESULT("no")
      fi
    else
      AC_MSG_ERROR([On SCO UNIX MySQL requires that the FSUThreads package is installed. See the Installation chapter in the Reference Manual.]);
    fi
  else
    AC_MSG_RESULT("no")
  fi
fi
# Hack for SCO UnixWare7
#
if test "$with_named_thread" = "no"
then
  AC_MSG_CHECKING("SCO UnixWare7 native threads")
  if expr "$SYSTEM_TYPE" : ".*UnixWare*" > /dev/null
  then
    if test -f /usr/lib/libthread.so -o -f /usr/lib/libthreadT.so
    then
      MYSQL_REMOVE_SOCKET_FROM_LIBS_HACK
      with_named_thread="-Kthread -lsocket -lnsl"
      if expr "$SYSTEM_TYPE" : ".*unixware7.0.0" > /dev/null
      then
        AC_DEFINE(HAVE_UNIXWARE7_THREADS)
      else
        AC_DEFINE(HAVE_UNIXWARE7_POSIX)
      fi
      # We must have cc
      AC_MSG_CHECKING("for gcc")
      if expr "$CC" : ".*gcc.*"
      then
	{ echo "configure: error: On SCO UnixWare7 MySQL must be compiled with cc. See the Installation chapter in the Reference Manual." 1>&2; exit 1; };
      else
	CC="$CC -Kthread -DUNIXWARE_7";
	CXX="$CXX -Kthread -DUNIXWARE_7";
      fi
      AC_MSG_RESULT("yes")
    else
      { echo "configure: error: Can't find thread libs on SCO UnixWare7. See the Installation chapter in the Reference Manual." 1>&2; exit 1; };
    fi
  else
    AC_MSG_RESULT("no")
  fi
fi

# Hack for Caldera OpenUNIX8
#
if test "$with_named_thread" = "no"
then
  AC_MSG_CHECKING("OpenUNIX8 native threads")
  if expr "$SYSTEM_TYPE" : ".*OpenUNIX*" > /dev/null
  then
    if test -f /usr/lib/libthread.so -o -f /usr/lib/libthreadT.so
    then
      MYSQL_REMOVE_SOCKET_FROM_LIBS_HACK
      with_named_thread="-Kthread -lsocket -lnsl"
      if expr "$SYSTEM_TYPE" : ".*unixware7.0.0" > /dev/null
      then
#        AC_DEFINE(HAVE_OpenUNIX8_THREADS)
        AC_DEFINE(HAVE_UNIXWARE7_THREADS)
      else
#        AC_DEFINE(HAVE_OpenUNIX8_POSIX)
        AC_DEFINE(HAVE_UNIXWARE7_POSIX)
      fi
      # We must have cc
      AC_MSG_CHECKING("for gcc")
      if expr "$CC" : ".*gcc.*"
      then
	{ echo "configure: error: On OpenUNIX8 and UnixWare7 MySQL must be compiled with cc. See the Installation chapter in the Reference Manual." 1>&2; exit 1; };
      else
#	CC="$CC -Kthread -DOpenUNIX8";
#	CXX="$CXX -Kthread -DOpenUNIX8";
	CC="$CC -Kthread -DUNIXWARE_7";
	CXX="$CXX -Kthread -DUNIXWARE_7";
      fi
      AC_MSG_RESULT("yes")
    else
      { echo "configure: error: Can't find thread libs on Caldera OpenUNIX 8. See the Installation chapter in the Reference Manual." 1>&2; exit 1; };
    fi
  else
    AC_MSG_RESULT("no")
  fi
fi

# Hack for Siemens UNIX
if test "$with_named_thread" = "no" -a "$with_mit_threads" = "no"
then
  AC_MSG_CHECKING("Siemens threads")
  if test -f /usr/lib/libxnet.so -a "$SYSTEM_TYPE" = "sni-sysv4"
  then
    LIBS="-lxnet $LIBS"
    NON_THREADED_CLIENT_LIBS="$NON_THREADED_CLIENT_LIBS -lxnet"
    with_named_thread="-Kthread $LDFLAGS -lxnet"
    LD_FLAGS=""
    CFLAGS="-Kthread $CFLAGS"
    CXXFLAGS="-Kthread $CXXFLAGS"
    AC_MSG_RESULT("yes")
  else
    AC_MSG_RESULT("no")
  fi
fi

# Use library named -lpthread
if test "$with_named_thread" = "no" -a "$with_pthread" = "yes"
then
    with_named_thread="-lpthread"
fi

#---END:

# Hack for Solaris >= 2.5
# We want both the new and the old interface
 
if test "$with_named_thread" = "no" -a "$with_mit_threads" = "no"
then
  AC_MSG_CHECKING("Solaris threads")
  if test -f /usr/lib/libpthread.so -a -f /usr/lib/libthread.so
  then
    with_named_thread="-lpthread -lthread"
    AC_MSG_RESULT("yes")
  else
    AC_MSG_RESULT("no")
  fi
fi

TOOLS_LIBS="$NON_THREADED_CLIENT_LIBS"

# Should we use named pthread library ?
AC_MSG_CHECKING("named thread libs:")
if test "$with_named_thread" != "no"
then
  LIBS="$with_named_thread $LIBS $with_named_thread"
  TOOLS_LIBS="$with_named_thread $TOOLS_LIBS $with_named_thread"
  with_posix_threads="yes"
  with_mit_threads="no"
  AC_MSG_RESULT("$with_named_thread")
else
  AC_MSG_RESULT("no")
  if test "$with_mit_threads" = "no"
  then
    # pthread_create is in standard libraries (As in BSDI 3.0)
    AC_MSG_CHECKING("for pthread_create in -libc");
    AC_TRY_LINK(
    [#include <pthread.h>],
    [ (void) pthread_create((pthread_t*) 0,(pthread_attr_t*) 0, 0, 0); ],
    with_posix_threads=yes, with_posix_threads=no)
    AC_MSG_RESULT("$with_posix_threads")
    if test "$with_posix_threads" = "no"
    then
      AC_MSG_CHECKING("for pthread_create in -lpthread");
      ac_save_LIBS="$LIBS"
      ac_save_TOOLS_LIBS="$TOOLS_LIBS"
      LIBS="$LIBS -lpthread"
      TOOLS_LIBS="$TOOLS_LIBS -lpthread"
      AC_TRY_LINK(
      [#include <pthread.h>],
      [ (void) pthread_create((pthread_t*) 0,(pthread_attr_t*) 0, 0, 0); ],
      with_posix_threads=yes, with_posix_threads=no)
      AC_MSG_RESULT("$with_posix_threads")
      if test "$with_posix_threads" = "no"
      then
        LIBS=" $ac_save_LIBS -lpthreads"
        TOOLS_LIBS=" $ac_save_TOOLS_LIBS -lpthreads"
        AC_MSG_CHECKING("for pthread_create in -lpthreads");
        AC_TRY_LINK(
        [#include <pthread.h>],
        [ pthread_create((pthread_t*) 0,(pthread_attr_t*) 0, 0, 0); ],
        with_posix_threads=yes, with_posix_threads=no)
        AC_MSG_RESULT("$with_posix_threads")
        if test "$with_posix_threads" = "no"
        then
	  # This is for FreeBSD
	  LIBS="$ac_save_LIBS -pthread"
	  TOOLS_LIBS="$ac_save_TOOLS_LIBS -pthread"
	  AC_MSG_CHECKING("for pthread_create in -pthread");
	  AC_TRY_LINK(
	  [#include <pthread.h>],
	  [ pthread_create((pthread_t*) 0,(pthread_attr_t*) 0, 0, 0); ],
	  with_posix_threads=yes, with_posix_threads=no)
          AC_MSG_RESULT("$with_posix_threads")
          if test "$with_posix_threads" = "no"
	  then
	    with_mit_threads="yes"
	    LIBS="$ac_save_LIBS"
	    TOOLS_LIBS="$ac_save_TOOLS_LIBS"
	  fi
	fi
      fi
    fi
  fi
fi

#---START: Used in for client configure
# Must be checked after, because strtok_r may be in -lpthread
# On AIX strtok_r is in libc_r

my_save_LIBS="$LIBS"
AC_CHECK_LIB(pthread,strtok_r)
LIBS="$my_save_LIBS"
if test "$ac_cv_lib_pthread_strtok_r" = "no"
then
  my_save_LIBS="$LIBS"
  AC_CHECK_LIB(c_r,strtok_r)
  case "$with_osf32_threads---$target_os" in
    # Don't keep -lc_r in LIBS; -pthread handles it magically
    yes---* | *---freebsd* ) LIBS="$my_save_LIBS" ;;
  esac
  AC_CHECK_FUNCS(strtok_r pthread_init)
else
  AC_CHECK_FUNCS(strtok_r)
fi
#---END:

# Check for dlopen, needed for user definable functions
# This must be checked after threads on AIX
# We only need this for mysqld, not for the clients.

my_save_LIBS="$LIBS"
LIBS=""
AC_CHECK_LIB(dl,dlopen)
LIBDL=$LIBS
LIBS="$my_save_LIBS"
AC_SUBST(LIBDL)

# System characteristics
AC_SYS_RESTARTABLE_SYSCALLS

# Build optimized or debug version ?
# First check for gcc and g++
if test "$ac_cv_prog_gcc" = "yes"
then
  DEBUG_CFLAGS="-g"
  DEBUG_OPTIMIZE_CC="-O"
  OPTIMIZE_CFLAGS="$MAX_C_OPTIMIZE"
else
  DEBUG_CFLAGS="-g"
  DEBUG_OPTIMIZE_CC=""
  OPTIMIZE_CFLAGS="-O"
fi
if test "$ac_cv_prog_cxx_g" = "yes"
then
  DEBUG_CXXFLAGS="-g"
  DEBUG_OPTIMIZE_CXX="-O"
  OPTIMIZE_CXXFLAGS="-O3"
else
  DEBUG_CXXFLAGS="-g"
  DEBUG_OPTIMIZE_CXX=""
  OPTIMIZE_CXXFLAGS="-O"
fi
AC_ARG_WITH(debug,
    [  --without-debug         Build a production version without debugging code],
    [with_debug=$withval],
    [with_debug=no])
if test "$with_debug" = "yes"
then
  # Medium debug.
  CFLAGS="$DEBUG_CFLAGS $DEBUG_OPTIMIZE_CC -DDBUG_ON -DSAFE_MUTEX $CFLAGS"
  CXXFLAGS="$DEBUG_CXXFLAGS $DEBUG_OPTIMIZE_CXX -DSAFE_MUTEX $CXXFLAGS"
elif test "$with_debug" = "full"
then
  # Full debug. Very slow in some cases
  CFLAGS="$DEBUG_CFLAGS -DDBUG_ON -DSAFE_MUTEX -DSAFEMALLOC $CFLAGS"
  CXXFLAGS="$DEBUG_CXXFLAGS -DSAFE_MUTEX -DSAFEMALLOC $CXXFLAGS"
else
  # Optimized version. No debug
  CFLAGS="$OPTIMIZE_CFLAGS -DDBUG_OFF $CFLAGS"
  CXXFLAGS="$OPTIMIZE_CXXFLAGS -DDBUG_OFF $CXXFLAGS"
fi

# Force static compilation to avoid linking probles/get more speed
AC_ARG_WITH(mysqld-ldflags,
    [  --with-mysqld-ldflags   Extra linking arguments for mysqld],
    [MYSQLD_EXTRA_LDFLAGS=$withval],
    [MYSQLD_EXTRA_LDFLAGS=])
AC_SUBST(MYSQLD_EXTRA_LDFLAGS)

AC_ARG_WITH(client-ldflags,
    [  --with-client-ldflags   Extra linking arguments for clients],
    [CLIENT_EXTRA_LDFLAGS=$withval],
    [CLIENT_EXTRA_LDFLAGS=])
AC_SUBST(CLIENT_EXTRA_LDFLAGS)

AC_ARG_WITH(lib-ccflags,
    [  --with-lib-ccflags      Extra CC options for libraries],
    [LIB_EXTRA_CCFLAGS=$withval],
    [LIB_EXTRA_CCFLAGS=])
AC_SUBST(LIB_EXTRA_CCFLAGS)

# Avoid stupid bug on some OS 
AC_ARG_WITH(low-memory,
    [  --with-low-memory       Try to use less memory to compile to avoid 
                          memory limitations.],
    [with_lowmem=$withval],
    [with_lowmem=no])
if test "$with_lowmem" = "yes"
then
  if test "$ac_cv_prog_gcc" = "yes" 
  then 
    LM_CFLAGS="-fno-inline"
  else
    LM_CFLAGS="-O0"
  fi
else
  LM_CFLAGS=""
fi
AC_SUBST(LM_CFLAGS)

AC_ARG_WITH(comment,
    [  --with-comment          Comment about compilation environment.],
    [with_comment=$withval],
    [with_comment=no])
if test "$with_comment" != "no"
then
  COMPILATION_COMMENT=$with_comment
else
  COMPILATION_COMMENT="Source distribution"
fi
AC_SUBST(COMPILATION_COMMENT)

AC_MSG_CHECKING("need of special linking flags")
if test "$IS_LINUX" = "true" -a "$ac_cv_prog_gcc" = "yes" -a "$all_is_static" != "yes"
then
  LDFLAGS="$LDFLAGS -rdynamic"
  AC_MSG_RESULT("-rdynamic")
else
  AC_MSG_RESULT("none")
fi

dnl Checks for typedefs, structures, and compiler characteristics.
AC_C_CONST
AC_C_INLINE
AC_TYPE_OFF_T
AC_STRUCT_ST_RDEV
AC_HEADER_TIME
AC_STRUCT_TM
# AC_CHECK_SIZEOF return 0 when it does not find the size of a
# type. We want a error instead.
AC_CHECK_SIZEOF(char, 1)
if test "$ac_cv_sizeof_char" -eq 0
then
  AC_MSG_ERROR([No size for char type.
A likely cause for this could be that there isn't any
static libraries installed. You can verify this by checking if you have libm.a
in /lib, /usr/lib or some other standard place.  If this is the problem,
install the static libraries and try again.  If this isn't the problem,
examine config.log for possible errors.  If you want to report this, use
'scripts/mysqlbug' and include at least the last 20 rows from config.log!])
fi
AC_CHECK_SIZEOF(int, 4)
if test "$ac_cv_sizeof_int" -eq 0
then
  AC_MSG_ERROR("No size for int type.")
fi
AC_CHECK_SIZEOF(long, 4)
if test "$ac_cv_sizeof_long" -eq 0
then
  AC_MSG_ERROR("No size for long type.")
fi
AC_CHECK_SIZEOF(long long, 8)
if test "$ac_cv_sizeof_long_long" -eq 0
then
  AC_MSG_ERROR("MySQL needs a long long type.")
fi
# off_t is not a builtin type
MYSQL_CHECK_SIZEOF(off_t, 4)
if test "$ac_cv_sizeof_off_t" -eq 0
then
  AC_MSG_ERROR("MySQL needs a off_t type.")
fi
# This always gives a warning. Ignore it unless you are cross compiling
AC_C_BIGENDIAN
#---START: Used in for client configure
# Check base type of last arg to accept
MYSQL_TYPE_ACCEPT

#---END:
# Find where the stack goes
MYSQL_STACK_DIRECTION
# We want to skip alloca on irix unconditionally. It may work on some version..
MYSQL_FUNC_ALLOCA
# Do struct timespec have members tv_sec or ts_sec
MYSQL_TIMESPEC_TS
# Do we have the tzname variable
MYSQL_TZNAME
# Do the system files define ulong
MYSQL_CHECK_ULONG
# Do the system files define uchar
MYSQL_CHECK_UCHAR
# Do the system files define uint
MYSQL_CHECK_UINT
#Check for fp_except in ieeefp.h
MYSQL_CHECK_FP_EXCEPT
# Do the c++ compiler have a bool type
MYSQL_CXX_BOOL
# Check some common bugs with gcc 2.8.# on sparc
MYSQL_CHECK_LONGLONG_TO_FLOAT
if test "$ac_cv_conv_longlong_to_float" != "yes"
then
  AC_MSG_ERROR([Your compiler cannot convert a longlong value to a float!
If you are using gcc 2.8.# you should upgrade to egcs 1.0.3 or newer and try
again]);
fi
MYSQL_PTHREAD_YIELD

######################################################################
# For readline-4.0 (We simply move the mimimum amount of stuff from
# the readline configure.in here)

MAKE_SHELL=/bin/sh
AC_SUBST(MAKE_SHELL)

# Already-done: stdlib.h string.h unistd.h termios.h
AC_CHECK_HEADERS(varargs.h stdarg.h dirent.h locale.h ndir.h sys/dir.h \
 sys/file.h sys/ndir.h sys/ptem.h sys/pte.h sys/select.h sys/stream.h \
 sys/mman.h curses.h termcap.h termio.h termbits.h asm/termbits.h grp.h \
paths.h)

# Already-done: strcasecmp
AC_CHECK_FUNCS(lstat putenv select setenv setlocale strcoll tcgetattr)

AC_STAT_MACROS_BROKEN
MYSQL_SIGNAL_CHECK
MYSQL_CHECK_GETPW_FUNCS
MYSQL_HAVE_TIOCGWINSZ
MYSQL_HAVE_FIONREAD
MYSQL_HAVE_TIOCSTAT
MYSQL_STRUCT_DIRENT_D_INO
MYSQL_TYPE_SIGHANDLER
if test "$with_named_curses" = "no"
then
  MYSQL_CHECK_LIB_TERMCAP
else
  TERMCAP_LIB="$with_named_curses"
fi
AC_SUBST(TERMCAP_LIB)

# End of readline stuff
#########################################################################

dnl Checks for library functions.
AC_FUNC_MMAP
AC_TYPE_SIGNAL
MYSQL_TYPE_QSORT
AC_FUNC_UTIME_NULL
AC_FUNC_VPRINTF
AC_CHECK_FUNCS(alarm bmove \
 chsize ftruncate rint finite isnan fpsetmask fpresetsticky\
 cuserid fcntl fconvert poll \
 getrusage getpwuid getcwd getrlimit getwd index stpcpy locking longjmp \
 perror pread realpath readlink rename \
 socket strnlen madvise mkstemp \
 strtol strtoul strtoll strtoull snprintf tempnam thr_setconcurrency \
 gethostbyaddr_r gethostbyname_r getpwnam \
 bfill bzero bcmp strstr strpbrk strerror \
 tell atod memcpy memmove \
 setupterm strcasecmp sighold vidattr lrand48 localtime_r \
 sigset sigthreadmask pthread_sigmask pthread_setprio pthread_setprio_np \
 pthread_setschedparam pthread_attr_setprio pthread_attr_setschedparam \
 pthread_attr_create pthread_getsequence_np pthread_attr_setstacksize \
 pthread_condattr_create rwlock_init pthread_rwlock_rdlock \
 fchmod getpass getpassphrase initgroups mlockall)

# Sanity check: We chould not have any fseeko symbol unless
# large_file_support=yes
AC_CHECK_FUNCS(fseeko,
[if test "$large_file_support" = no -a "$IS_LINUX" = "true";
then
  AC_MSG_ERROR("Found fseeko symbol but large_file_support is not enabled!");
fi]
)

my_save_LIBS="$LIBS"
LIBS="$LIBS $LIBDL"
AC_CHECK_FUNCS(dlopen dlerror)
LIBS="$my_save_LIBS"

# Check definition of gethostbyaddr_r (glibc2 defines this with 8 arguments)
ac_save_CXXFLAGS="$CXXFLAGS"
AC_CACHE_CHECK([style of gethost* routines], mysql_cv_gethost_style,
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
# Do not treat warnings as errors if we are linking agaist other libc
# this is to work around gcc not being permissive on non-system includes
# with respect to ANSI C++
if test "$ac_cv_prog_gxx" = "yes" -a "$with_other_libc" = "no" 
then
  CXXFLAGS="$CXXFLAGS -Werror"
fi
AC_TRY_COMPILE(
[#undef inline
#if !defined(SCO) && !defined(__osf__)
#define _REENTRANT
#endif
#include <pthread.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netdb.h>],
[int skr;
 struct hostent *foo = gethostbyaddr_r((const char *) 0,
  0, 0, (struct hostent *) 0, (char *) NULL,  0, &skr); return (foo == 0);],
mysql_cv_gethost_style=solaris, mysql_cv_gethost_style=other))
AC_LANG_RESTORE
CXXFLAGS="$ac_save_CXXFLAGS"
if test "$mysql_cv_gethost_style" = "solaris"
then
  AC_DEFINE(HAVE_SOLARIS_STYLE_GETHOST)
fi

#---START: Used in for client configure

# Check definition of gethostbyname_r (glibc2.0.100 is different from Solaris)
ac_save_CXXFLAGS="$CXXFLAGS"
AC_CACHE_CHECK([style of gethostname_r routines], mysql_cv_gethostname_style,
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
if test "$ac_cv_prog_gxx" = "yes" -a "$with_other_libc" = "no"
then
  CXXFLAGS="$CXXFLAGS -Werror"
fi
AC_TRY_COMPILE(
[#undef inline
#if !defined(SCO) && !defined(__osf__)
#define _REENTRANT
#endif
#include <pthread.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netdb.h>],
[int skr;

 skr = gethostbyname_r((const char *) 0,
  (struct hostent*) 0, (char*) 0, 0, (struct hostent **) 0, &skr);],
mysql_cv_gethostname_style=glibc2, mysql_cv_gethostname_style=other))
AC_LANG_RESTORE
CXXFLAGS="$ac_save_CXXFLAGS"
if test "$mysql_cv_gethostname_style" = "glibc2"
then
  AC_DEFINE(HAVE_GETHOSTBYNAME_R_GLIBC2_STYLE)
fi

# Check 3rd argument of getthostbyname_r
ac_save_CXXFLAGS="$CXXFLAGS"
AC_CACHE_CHECK([3 argument to gethostname_r routines], mysql_cv_gethostname_arg,
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
if test "$ac_cv_prog_gxx" = "yes" -a "$with_other_libc" = "no"
then
  CXXFLAGS="$CXXFLAGS -Werror"
fi
AC_TRY_COMPILE(
[#undef inline
#if !defined(SCO) && !defined(__osf__)
#define _REENTRANT
#endif
#include <pthread.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netdb.h>],
[int skr;

 skr = gethostbyname_r((const char *) 0, (struct hostent*) 0, (struct hostent_data*) 0);],
mysql_cv_gethostname_arg=hostent_data, mysql_cv_gethostname_arg=char))
AC_LANG_RESTORE
CXXFLAGS="$ac_save_CXXFLAGS"
if test "$mysql_cv_gethostname_arg" = "hostent_data"
then
  AC_DEFINE(HAVE_GETHOSTBYNAME_R_RETURN_INT)
fi


if test "$with_mit_threads" = "no"
then
  # Check definition of pthread_getspecific
  AC_CACHE_CHECK("args to pthread_getspecific", mysql_cv_getspecific_args,
  AC_TRY_COMPILE(
[#if !defined(SCO) && !defined(__osf__)
#define _REENTRANT
#endif
#define _POSIX_PTHREAD_SEMANTICS 
#include <pthread.h> ],
[ void *pthread_getspecific(pthread_key_t key);
pthread_getspecific((pthread_key_t) NULL); ],
mysql_cv_getspecific_args=POSIX, mysql_cv_getspecific_args=other))
  if test "$mysql_cv_getspecific_args" = "other"
  then
    AC_DEFINE(HAVE_NONPOSIX_PTHREAD_GETSPECIFIC)
  fi

  # Check definition of pthread_mutex_init
  AC_CACHE_CHECK("args to pthread_mutex_init", mysql_cv_mutex_init_args,
  AC_TRY_COMPILE(
[#if !defined(SCO) && !defined(__osf__)
#define _REENTRANT
#endif
#define _POSIX_PTHREAD_SEMANTICS 
#include <pthread.h> ],
[ 
  pthread_mutexattr_t attr;
  pthread_mutex_t mp;
  pthread_mutex_init(&mp,&attr); ],
mysql_cv_mutex_init_args=POSIX, mysql_cv_mutex_init_args=other))
  if test "$mysql_cv_mutex_init_args" = "other"
  then
    AC_DEFINE(HAVE_NONPOSIX_PTHREAD_MUTEX_INIT)
  fi
fi
#---END:

#---START: Used in for client configure
# Check definition of readdir_r
AC_CACHE_CHECK("args to readdir_r", mysql_cv_readdir_r,
AC_TRY_LINK(
[#if !defined(SCO) && !defined(__osf__)
#define _REENTRANT
#endif
#define _POSIX_PTHREAD_SEMANTICS 
#include <pthread.h>
#include <dirent.h>],
[ int readdir_r(DIR *dirp, struct dirent *entry, struct dirent **result);
readdir_r((DIR *) NULL, (struct dirent *) NULL, (struct dirent **) NULL); ],
mysql_cv_readdir_r=POSIX, mysql_cv_readdir_r=other))
if test "$mysql_cv_readdir_r" = "POSIX"
then
  AC_DEFINE(HAVE_READDIR_R)
fi

# Check definition av posix sigwait()
AC_CACHE_CHECK("style of sigwait", mysql_cv_sigwait,
AC_TRY_LINK(
[#if !defined(SCO) && !defined(__osf__)
#define _REENTRANT
#endif
#define _POSIX_PTHREAD_SEMANTICS 
#include <pthread.h>
#include <signal.h>],
[#ifndef _AIX
sigset_t set;
int sig;
sigwait(&set,&sig);
#endif],
mysql_cv_sigwait=POSIX, mysql_cv_sigwait=other))
if test "$mysql_cv_sigwait" = "POSIX"
then
  AC_DEFINE(HAVE_SIGWAIT)
fi

if test "$mysql_cv_sigwait" != "POSIX"
then
unset mysql_cv_sigwait
# Check definition av posix sigwait()
AC_CACHE_CHECK("style of sigwait", mysql_cv_sigwait,
AC_TRY_LINK(
[#if !defined(SCO) && !defined(__osf__)
#define _REENTRANT
#endif
#define _POSIX_PTHREAD_SEMANTICS 
#include <pthread.h>
#include <signal.h>],
[sigset_t set;
int sig;
sigwait(&set);],
mysql_cv_sigwait=NONPOSIX, mysql_cv_sigwait=other))
if test "$mysql_cv_sigwait" = "NONPOSIX"
then
  AC_DEFINE(HAVE_NONPOSIX_SIGWAIT)
fi
fi
#---END:

# Check if pthread_attr_setscope() exists
AC_CACHE_CHECK("for pthread_attr_setscope", mysql_cv_pthread_attr_setscope,
AC_TRY_LINK(
[#if !defined(SCO) && !defined(__osf__)
#define _REENTRANT
#endif
#define _POSIX_PTHREAD_SEMANTICS 
#include <pthread.h>],
[pthread_attr_t thr_attr;
pthread_attr_setscope(&thr_attr,0);],
mysql_cv_pthread_attr_setscope=yes, mysql_cv_pthread_attr_setscope=no))
if test "$mysql_cv_pthread_attr_setscope" = "yes"
then
  AC_DEFINE(HAVE_PTHREAD_ATTR_SETSCOPE)
fi

# Check for bad includes
AC_MSG_CHECKING("can netinet files be included")
AC_TRY_COMPILE(
[#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in_systm.h>
#include <netinet/in.h>
#include <netinet/ip.h>
#include <netinet/tcp.h>],
[ printf("1\n"); ],
netinet_inc=yes, netinet_inc=no)
if test "$netinet_inc" = "no"
then
  AC_DEFINE(HAVE_BROKEN_NETINET_INCLUDES)
fi
AC_MSG_RESULT("$netinet_inc")

# Only build client code?
AC_ARG_WITH(server,
    [  --without-server        Only build the client.],
    [with_server=$withval],
    [with_server=yes]
)

AC_ARG_WITH(embedded-server,
    [  --with-embedded-server  Build the embedded server (libmysqld).],
    [with_embedded_server=$withval],
    [with_embedded_server=no]
)

AC_ARG_WITH(query_cache,
    [  --without-query-cache   Do not build query cache.],
    [with_query_cache=$withval],
    [with_query_cache=yes]
)

if test "$with_query_cache" = "yes"
then
  AC_DEFINE(HAVE_QUERY_CACHE)
fi

AC_ARG_WITH(extra-tools,
    [  --without-extra-tools   Skip building utilites in the tools directory.],
    [with_tools=$withval],
    [with_tools=yes]
)

tools_dirs=""
if test "$with_tools" = "yes"
then
  if test "$THREAD_SAFE_CLIENT" = "no"
  then
    echo "Warning: extra-tools disabled because --enable-thread-safe-client wasn't used"
  else
    tools_dirs="tools"
  fi
fi
AC_SUBST(tools_dirs)

#MYSQL_CHECK_CPU
MYSQL_CHECK_MYSQLFS
MYSQL_CHECK_VIO
MYSQL_CHECK_OPENSSL

libmysqld_dirs=
if test "$with_embedded_server" = "yes"
then
  libmysqld_dirs=libmysqld
  # We can't build embedded library without building the server, because
  # we depend on libmysys, libmystrings, libmyisam, etc.
  with_server=yes
fi
# XXX: We need to add @libmysqld_extra_libs@ (or whatever) so that
# mysql_config --libmysqld-libs will print out something like
# -L/path/to/lib/mysql -lmysqld -lmyisam -lmysys -lmystrings -ldbug ...
AC_SUBST([libmysqld_dirs])

# Shall we build the docs?
AC_ARG_WITH(docs,
    [  --without-docs          Skip building of the documentation.],
    [with_docs=$withval],
    [with_docs=yes]
)

if test "$with_docs" = "yes"
then
  docs_dirs="Docs"
else
  docs_dirs=""
fi
AC_SUBST(docs_dirs)

# Shall we build the bench code?
AC_ARG_WITH(bench,
    [  --without-bench         Skip building of the benchmark suite.],
    [with_bench=$withval],
    [with_bench=yes]
)

if test "$with_bench" = "yes"
then
  bench_dirs="sql-bench"
else
  bench_dirs=""
fi
bench_dirs="$bench_dirs mysql-test"
AC_SUBST(bench_dirs)

# Don't build readline, i have it already
AC_ARG_WITH(readline,
    [  --without-readline      Use system readline instead of bundled copy.],
    [ with_readline=$withval ],
    [ with_readline=yes ]
    )
if test "$with_readline" = "yes"
then
  readline_dir="readline"
  readline_link="\$(top_builddir)/readline/libreadline.a"
else
  # This requires readline to be in a standard place. Mosty for linux
  # there readline may be a shared library.
  readline_dir=""
  readline_link="-lreadline"
fi
AC_SUBST(readline_dir)
AC_SUBST(readline_link)

dnl In order to add new charset, you must add charset name to
dnl this CHARSETS_AVAILABLE list and sql/share/charsets/Index.
dnl If the character set uses strcoll or other special handling,
dnl you must also create strings/ctype-$charset_name.c

AC_DIVERT_PUSH(0)
CHARSETS_AVAILABLE="big5 cp1251 cp1257
                          croat czech danish dec8 dos estonia euc_kr gb2312 gbk
                          german1 greek hebrew hp8 hungarian koi8_ru koi8_ukr
                          latin1 latin1_de latin2 latin5 sjis swe7 tis620 ujis
                          usa7 win1250 win1251ukr"
CHARSETS_DEPRECATED="win1251"
DEFAULT_CHARSET=latin1
AC_DIVERT_POP

AC_ARG_WITH(charset,
  [  --with-charset=CHARSET  Use CHARSET by default (one of: $CHARSETS_AVAILABLE; Default is $DEFAULT_CHARSET)],
  [default_charset="$withval"],
  [default_charset="$DEFAULT_CHARSET"])

AC_ARG_WITH(extra-charsets,
  [  --with-extra-charsets=CHARSET[,CHARSET,...]
                          Use charsets in addition to default (none, complex,
                          all, or a list selected from the above sets)],
  [extra_charsets="$withval"],
  [extra_charsets="none"])

AC_MSG_CHECKING("character sets")

if test "$extra_charsets" = none; then
  CHARSETS=""
elif test "$extra_charsets" = complex; then
  CHARSETS=`/bin/ls -1 $srcdir/strings/ctype-*.c | \
                  sed -e 's;^.*/ctype-;;' -e 's;.c$;;'`
  CHARSETS=`echo $CHARSETS`     # get rid of line breaks
else
  if test "$extra_charsets" = all; then
    CHARSETS="$CHARSETS_AVAILABLE $CHARSETS_DEPRECATED"
  else
    CHARSETS=`echo $extra_charsets | sed -e 's/,/ /g'`
  fi
fi

# Ensure that the default_charset is first in CHARSETS
TMP_CHARSETS="$default_charset "
for i in $CHARSETS
do
  if test $i != $default_charset
  then
    TMP_CHARSETS="$TMP_CHARSETS $i"
  fi
done
CHARSETS=$TMP_CHARSETS

# Check if charsets are all good
for cs in $CHARSETS
do
  charset_okay=0
  for charset in $CHARSETS_AVAILABLE $CHARSETS_DEPRECATED
  do
    if test $cs = $charset; then charset_okay=1; fi
  done
  if test $charset_okay = 0;
  then
    AC_MSG_ERROR([Charset $cs not available. (Available $CHARSETS_AVAILABLE).
    See the Installation chapter in the Reference Manual.]);
  fi
done
  
CHARSET_SRCS=""
CHARSETS_NEED_SOURCE=""
CHARSET_DECLARATIONS=""
CHARSET_COMP_CS_INIT="CHARSET_INFO compiled_charsets[[]] = {"

want_use_strcoll=0
want_use_mb=0

index_file="$srcdir/sql/share/charsets/Index"

for c in $CHARSETS
do
  # get the charset number from $index_file
changequote(,)dnl
  subpat='^'"${c}"'[ 	][ 	]*\([0-9][0-9]*\)[^0-9]*$'
  number=`sed -e "/$subpat/!d" -e 's//\1/' $index_file`
changequote([,])dnl
  # some sanity checking....
  if test X"$number" = X
  then
    AC_MSG_ERROR([No number was found in $index_file for the $c character set.  This is a bug in the MySQL distribution.  Please report this message to bugs@lists.mysql.com.])
  fi

  cs_file="$srcdir/strings/ctype-$c.c"
  if test -f $cs_file
  then
    CHARSET_SRCS="${CHARSET_SRCS}ctype-$c.c "
    # get the strxfrm multiplier and max mb len from files
    subpat='^.*\\.configure\\. strxfrm_multiply_'"${c}"'='
    strx=`$AWK 'sub("'"$subpat"'", "") { print }' $cs_file`
    subpat='^.*\\.configure\\. mbmaxlen_'"${c}"'='
    maxl=`$AWK 'sub("'"$subpat"'", "") { print }' $cs_file`

    CHARSET_DECLARATIONS="$CHARSET_DECLARATIONS

/* declarations for the ${c} character set, filled in by configure */
extern uchar ctype_${c}[[]], to_lower_${c}[[]], to_upper_${c}[[]], sort_order_${c}[[]];"
  else
    CHARSETS_NEED_SOURCE="$CHARSETS_NEED_SOURCE $c"
    strx=''
    maxl=''
  fi

  CHARSET_COMP_CS_INIT="$CHARSET_COMP_CS_INIT

  /* this information is filled in by configure */
  {
    $number,    /* number */
    \"$c\",     /* name */
    ctype_${c},
    to_lower_${c},
    to_upper_${c},
    sort_order_${c},"

  if test -n "$strx"
  then
    want_use_strcoll=1

    CHARSET_DECLARATIONS="$CHARSET_DECLARATIONS
extern int     my_strcoll_${c}(const uchar *, const uchar *);
extern int     my_strxfrm_${c}(uchar *, const uchar *, int);
extern int     my_strnncoll_${c}(const uchar *, int, const uchar *, int);
extern int     my_strnxfrm_${c}(uchar *, const uchar *, int, int);
extern my_bool my_like_range_${c}(const char *, uint, pchar, uint,
                          char *, char *, uint *, uint *);"

    CHARSET_COMP_CS_INIT="$CHARSET_COMP_CS_INIT
    $strx,      /* strxfrm_multiply */
    my_strcoll_${c},
    my_strxfrm_${c},
    my_strnncoll_${c},
    my_strnxfrm_${c},
    my_like_range_${c},"
  else
    CHARSET_COMP_CS_INIT="$CHARSET_COMP_CS_INIT
    0,          /* strxfrm_multiply */
    NULL,       /* strcoll    */
    NULL,       /* strxfrm    */
    NULL,       /* strnncoll  */
    NULL,       /* strnxfrm   */
    NULL,       /* like_range */"
  fi

  if test -n "$maxl"
  then
    want_use_mb=1

    CHARSET_DECLARATIONS="$CHARSET_DECLARATIONS
extern int     ismbchar_${c}(const char *, const char *);
extern my_bool ismbhead_${c}(uint);
extern int     mbcharlen_${c}(uint);"


    CHARSET_COMP_CS_INIT="$CHARSET_COMP_CS_INIT
    $maxl,      /* mbmaxlen */
    ismbchar_${c},
    ismbhead_${c},
    mbcharlen_${c}"
  else
    CHARSET_COMP_CS_INIT="$CHARSET_COMP_CS_INIT
    0,          /* mbmaxlen  */
    NULL,       /* ismbchar  */
    NULL,       /* ismbhead  */
    NULL        /* mbcharlen */"
  fi
  CHARSET_COMP_CS_INIT="$CHARSET_COMP_CS_INIT
  },"
done

CHARSET_COMP_CS_INIT="$CHARSET_COMP_CS_INIT

  /* this information is filled in by configure */
  {
    0,          /* end-of-list marker */
    NullS,
    NULL,
    NULL,
    NULL,
    NULL,
    0,
    NULL,
    NULL,
    NULL,
    NULL,
    NULL,
    0,
    NULL,
    NULL,
    NULL
  }
};"


if test $want_use_strcoll = 1
then
  AC_DEFINE(USE_STRCOLL)
fi

if test $want_use_mb = 1
then
  AC_DEFINE(USE_MB)
  AC_DEFINE(USE_MB_IDENT)
fi

AC_SUBST(default_charset)
AC_SUBST(CHARSET_SRCS)
CHARSET_OBJS="`echo "$CHARSET_SRCS" | sed -e 's/\.c /.o /g'`"
AC_SUBST(CHARSET_OBJS)
AC_SUBST(CHARSETS_NEED_SOURCE)

dnl We can't use AC_SUBST because these substitutions are too long.
dnl I don't want to use sed, either, because there's a reason why
dnl autoconf breaks up the substitution commands.  So we'll just
dnl write to a file and #include it.
dnl AC_SUBST(CHARSET_DECLARATIONS)
dnl AC_SUBST(CHARSET_COMP_CS_INIT)
dnl sed -e "s%@CHARSET_DECLARATIONS@%$CHARSET_DECLARATIONS%g" \
dnl     -e "s%@CHARSET_COMP_CS_INIT@%$CHARSET_COMP_CS_INIT%g" \
dnl     $srcdir/strings/ctype.c.in > $srcdir/strings/ctype.c

cat <<EOF > $srcdir/strings/ctype_autoconf.c
/* This file is generated automatically by configure. */$CHARSET_DECLARATIONS

$CHARSET_COMP_CS_INIT
EOF

AC_MSG_RESULT([default: $default_charset; compiled in: $CHARSETS])


MYSQL_CHECK_ISAM
MYSQL_CHECK_BDB
MYSQL_CHECK_INNODB

# If we have threads generate some library functions and test programs
sql_server_dirs=
server_scripts=
thread_dirs=

dnl This probably should be cleaned up more - for now the threaded
dnl client is just using plain-old libs.
sql_client_dirs="libmysql client"
linked_client_targets="linked_libmysql_sources"
CLIENT_LIBS=$NON_THREADED_CLIENT_LIBS
if test "$THREAD_SAFE_CLIENT" != "no"
then
  sql_client_dirs="libmysql_r $sql_client_dirs"
  linked_client_targets="$linked_client_targets linked_libmysql_r_sources"
  AC_DEFINE(THREAD_SAFE_CLIENT)
fi

if test "$static_nss" = "1"
then
  CLIENT_LIBS="$CLIENT_LIBS $STATIC_NSS_FLAGS"
fi  

AC_SUBST(CLIENT_LIBS)
AC_SUBST(sql_client_dirs)
AC_SUBST(linked_client_targets)

if test "$with_server" = "yes" -o "$THREAD_SAFE_CLIENT" != "no"
then
  AC_DEFINE(THREAD)
  # Avoid _PROGRAMS names
  THREAD_LPROGRAMS="test_thr_alarm test_thr_lock"
  AC_SUBST(THREAD_LPROGRAMS)
  THREAD_LOBJECTS="thr_alarm.o thr_lock.o thr_mutex.o thr_rwlock.o my_pthread.o my_thr_init.o"
  AC_SUBST(THREAD_LOBJECTS)
  server_scripts="mysqld_safe mysql_install_db"
  sql_server_dirs="strings dbug mysys extra regex"


  #
  # Configuration for optional table handlers
  #

  if test X"$have_isam" != Xno
  then
    sql_server_dirs="$sql_server_dirs isam merge"
  fi

  if test X"$have_berkeley_db" != Xno; then
    if test X"$have_berkeley_db" != Xyes; then
      # we must build berkeley db from source
      sql_server_dirs="$sql_server_dirs $have_berkeley_db"

      echo "CONFIGURING FOR BERKELEY DB" 
      bdb_conf_flags=
      if test $with_debug = "yes"
      then
        bdb_conf_flags="$bdb_conf_flags --enable-debug --enable-diagnostic"
      fi
      # NOTICE: if you're compiling BDB, it needs to be a SUBDIR
      # of $srcdir (i.e., you can 'cd $srcdir/$bdb').  It won't
      # work otherwise.
      if test -d "$bdb"; then :
      else
	# This should only happen when doing a VPATH build
	echo "NOTICE: I have to make the BDB directory: `pwd`:$bdb"
	mkdir "$bdb" || exit 1
      fi
      if test -d "$bdb"/build_unix; then :
      else
	# This should only happen when doing a VPATH build
	echo "NOTICE: I have to make the build_unix directory: `pwd`:$bdb/build_unix"
	mkdir "$bdb/build_unix" || exit 1
      fi
      rel_srcdir=
      case "$srcdir" in
	/* ) rel_srcdir="$srcdir" ;;
	* )  rel_srcdir="../../$srcdir" ;;
      esac
      (cd $bdb/build_unix && \
       sh $rel_srcdir/$bdb/dist/configure $bdb_conf_flags) || \
	AC_MSG_ERROR([could not configure Berkeley DB])

dnl       echo "bdb = '$bdb'; inc = '$bdb_includes', lib = '$bdb_libs'"
      echo "END OF BERKELEY DB CONFIGURATION"
    fi

    AC_DEFINE(HAVE_BERKELEY_DB)
  else
    if test -d bdb; then :
    else
      mkdir bdb && mkdir bdb/build_unix
    fi

    if test -r bdb/build_unix/db.h; then :
    else
      cat <<EOF > bdb/build_unix/db.h

This file is a placeholder to fool make.  The way that automake
and GNU make work together causes some files to depend on this
header, even if we're not building with Berkeley DB.

Obviously, if this file *is* used, it'll break and hopefully we can find
out why this file was generated by ${top_srcdir}/configure instead of
the real db.h.

If you run into some problems because of this file, please use mysql_bug
to generate a bug report, and give the exact output of make and any
details you can think of.  Send the message to bugs@lists.mysql.com.

Thank you!

EOF
    fi
  fi

  if test X"$have_innodb" = Xyes
  then
    sql_server_dirs="$sql_server_dirs innobase"
    echo "CONFIGURING FOR INNODB" 
    if test ! -d "innobase"; then
        # This should only happen when doing a VPATH build
        echo "NOTICE: I have to make the Innobase directory: `pwd`/innobase"
	mkdir "innobase" || exit 1
    fi
    rel_srcdir=
    case "$srcdir" in
	/* ) rel_srcdir="$srcdir" ;;
	* )  rel_srcdir="../$srcdir" ;;
    esac
    (cd innobase && sh $rel_srcdir/innobase/configure) \
    || AC_MSG_ERROR([could not configure INNODB])

    echo "END OF INNODB CONFIGURATION"
  fi
  #
  # END of configuration for optional table handlers
  #
  sql_server_dirs="$sql_server_dirs myisam myisammrg heap vio sql"

  if test "$with_posix_threads" = "no" -o "$with_mit_threads" = "yes"
  then
    # MIT user level threads
    thread_dirs="mit-pthreads"
    AC_DEFINE(HAVE_mit_thread)
    MT_INCLUDES="-I\$(top_srcdir)/mit-pthreads/include"
    AC_SUBST(MT_INCLUDES)
    if test -n "$OVERRIDE_MT_LD_ADD"
    then 
      MT_LD_ADD="$OVERRIDE_MT_LD_ADD"
    else
      MT_LD_ADD="-L \$(top_srcdir)/mit-pthreads/obj/ -lpthread"
    fi
    AC_SUBST(MT_LD_ADD)
    echo ""
    echo "Configuring MIT Pthreads"
    # We will never install so installation paths are not needed.
    (cd mit-pthreads; sh ./configure)
    echo "End of MIT Pthreads configuration"
    echo ""
    LIBS="$MT_LD_ADD $LIBS"
  fi
fi

# IMPORTANT - do not modify LIBS past this line - this hack is the only way
# I know to add the static NSS magic if we have static NSS libraries with
# glibc - Sasha

if test "$static_nss" = "1"
then
 LDFLAGS="$LDFLAGS -static -L$other_libc_lib " 
 LIBS="$LIBS $STATIC_NSS_FLAGS"
fi  

AC_SUBST(sql_server_dirs)
AC_SUBST(thread_dirs)
AC_SUBST(server_scripts)

#if test "$with_posix_threads" = "no" -o "$with_mit_threads" = "yes"
#then
  # MIT pthreads does now support connecting with unix sockets
  # AC_DEFINE(HAVE_THREADS_WITHOUT_SOCKETS)
#fi

# Some usefull subst
AC_SUBST(CC)
AC_SUBST(GXX)
#Remove TOOLS_LIBS, because this is included in LIBRARIES
#AC_SUBST(TOOLS_LIBS)

# Output results
AC_OUTPUT(Makefile extra/Makefile mysys/Makefile isam/Makefile \
 strings/Makefile regex/Makefile heap/Makefile \
 bdb/Makefile \
 myisam/Makefile myisammrg/Makefile \
 man/Makefile BUILD/Makefile readline/Makefile vio/Makefile \
 libmysql_r/Makefile libmysqld/Makefile libmysqld/examples/Makefile \
 libmysql/Makefile client/Makefile \
 pstack/Makefile pstack/aout/Makefile sql/Makefile sql/share/Makefile \
 merge/Makefile dbug/Makefile scripts/Makefile \
 include/Makefile sql-bench/Makefile tools/Makefile \
 tests/Makefile Docs/Makefile support-files/Makefile \
 mysql-test/Makefile \
 include/mysql_version.h
 , , [
  test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
 ])

rm -f $AVAILABLE_LANGUAGES_ERRORS_RULES
echo
echo "MySQL has a Web site at http://www.mysql.com/ which carries details on the"
echo "latest release, upcoming features and other information to make your"
echo "work or play with MySQL more productive. There you can also find"
echo "information about mailing lists for MySQL discussion."
echo
echo "Remember to check the platform specific part of the reference manual for"
echo "hints about installing MySQL on your platform. Also have a look at the"
echo "files in the Docs directory."
echo
# The following text is checked in ./Do-compile to se that the configure ends.
echo "Thank you for choosing MySQL!"
echo