Merge bk-internal.mysql.com:/home/bk/mysql-5.0

into mysql.com:/opt/local/work/mysql-5.0-root

.bzrignore

@@ -1110,3 +1110,8 @@ VC++Files/client/mysql_amd64.dsp
 client/mysqltestmanager-pwgen
 client/mysqltestmanagerc
 tools/mysqltestmanager
+config.guess
+config.sub
+install-sh
+ltmain.sh
+missing

BUILD/FINISH.sh

@@ -7,17 +7,9 @@ commands="\
 $make -k distclean || true 
 /bin/rm -rf */.deps/*.P config.cache innobase/config.cache bdb/build_unix/config.cache bdb/dist/autom4te.cache autom4te.cache innobase/autom4te.cache;
 
-aclocal    || (echo \"Can't execute aclocal\"     && exit 1)
-autoheader || (echo \"Can't execute autoheader\"  && exit 1)
-aclocal    || (echo \"Can't execute aclocal\"     && exit 1)
-automake   || (echo \"Can't execute automake\"    && exit 1)
-autoconf   || (echo \"Can't execute autoconf\"    && exit 1)
-(cd bdb/dist && sh s_all)
-(cd innobase && aclocal && autoheader && aclocal && automake && autoconf)
-if [ -d gemini ]
-then
-   (cd gemini && aclocal && autoheader && aclocal && automake && autoconf)
-fi"
+
+path=`dirname $0`
+. \"$path/autorun.sh\""
 
 if [ -z "$just_clean" ]
 then

BUILD/autorun.sh

+#!/bin/sh
+# Create MySQL autotools infrastructure
+
+aclocal    || (echo "Can't execute aclocal" && exit 1)
+autoheader || (echo "Can't execute autoheader" && exit 1)
+# --force means overwrite ltmain.sh script if it already exists 
+libtoolize --automake --force \
+           || (echo "Can't execute libtoolize" && exit 1)
+# --add-missing instructs automake to install missing auxiliary files
+# and --force to overwrite them if they already exist
+automake --add-missing --force \
+           || (echo "Can't execute automake" && exit 1)
+autoconf   || (echo "Can't execute autoconf" && exit 1)
+(cd bdb/dist && sh s_all)
+(cd innobase && aclocal && autoheader && aclocal && automake && autoconf)

BUILD/compile-alpha-ccc

@@ -2,7 +2,9 @@
 make -k clean
 /bin/rm -f */.deps/*.P */*.o
 /bin/rm -f config.cache mysql-*.tar.gz
-aclocal; autoheader; aclocal; automake; autoconf
+
+path=`dirname $0`
+. "$path/autorun.sh"
 
 CC=ccc CFLAGS="-fast -O3 -fomit-frame-pointer" CXX=gcc CXXFLAGS="-O6 -fomit-frame-pointer -felide-constructors -fno-exceptions -fno-rtti -mcpu=ev6 -Wa,-mev6" CXXLDFLAGS='/usr/lib/compaq/libots-2.2.7/libots.so /usr/lib/compaq/cpml-5.0.0/libcpml_ev6.a' ./configure --prefix=/usr/local/mysql --disable-shared --with-extra-charsets=complex --enable-thread-safe-client
 make

BUILD/compile-alpha-cxx

@@ -2,7 +2,9 @@
 make -k clean
 /bin/rm -f */.deps/*.P */*.o
 /bin/rm -f */.deps/*.P config.cache innobase/config.cache bdb/build_unix/config.cache mysql-*.tar.gz
-aclocal; autoheader; aclocal; automake; autoconf
+
+path=`dirname $0`
+. "$path/autorun.sh"
 
 CC=ccc CFLAGS="-fast" CXX=cxx CXXFLAGS="-fast -noexceptions -nortti" ./configure --prefix=/usr/local/mysql --disable-shared --with-extra-charsets=complex --enable-thread-safe-client --with-mysqld-ldflags=-non_shared --with-client-ldflags=-non_shared --without-extra-tools --disable-dependency-tracking
 

BUILD/compile-alpha-debug

@@ -2,7 +2,9 @@
 make -k clean
 /bin/rm -f */.deps/*.P */*.o
 /bin/rm -f */.deps/*.P config.cache innobase/config.cache bdb/build_unix/config.cache mysql-*.tar.gz
-aclocal; autoheader; aclocal; automake; autoconf
+
+path=`dirname $0`
+. "$path/autorun.sh"
 
 CFLAGS=-O1 CC=gcc CXX=gcc CXXFLAGS="-O1 -felide-constructors -fno-exceptions -fno-rtti" ./configure --prefix=/usr/local/mysql --with-debug --with-extra-charsets=complex  --without-extra-tools
 make

BUILD/compile-hpux11-parisc2-aCC

@@ -62,14 +62,9 @@ done
 
 set -x
 make distclean
-aclocal
-autoheader
-libtoolize --automake --force
-automake --force --add-missing
-autoconf
 
-(cd bdb/dist && sh s_all)
-(cd innobase && aclocal && autoheader && aclocal && automake && autoconf)
+path=`dirname $0`
+. "$path/autorun.sh"
 
 CC=cc CXX=aCC CFLAGS="$cflags" CXXFLAGS="$cxxflags" \
 ./configure --prefix=/usr/local/mysql --disable-shared \

BUILD/compile-ia64-debug-max

 gmake -k clean || true 
 /bin/rm -f */.deps/*.P config.cache innobase/config.cache bdb/build_unix/config.cache
 
-aclocal && autoheader && aclocal && automake && autoconf
-(cd bdb/dist && sh s_all)
-(cd innobase && aclocal && autoheader && aclocal && automake && autoconf)
-if [ -d gemini ]
-then
-   (cd gemini && aclocal && autoheader && aclocal && automake && autoconf)
-fi
+path=`dirname $0`
+. "$path/autorun.sh"
 
 CC=ecc CFLAGS="-w1 -DEXTRA_DEBUG -DSAFEMALLOC -DSAFE_MUTEX -O2" CXX=ecc CXXFLAGS="-w1 -DEXTRA_DEBUG -DSAFEMALLOC -DSAFE_MUTEX -O2" ./configure --prefix=/usr/local/mysql --with-extra-charsets=complex --enable-thread-safe-client --with-mysqld-ldflags=-all-static  --with-client-ldflags=-all-static  --with-debug --with-innodb --with-embedded-server --with-archive-storage-engine
 gmake

BUILD/compile-irix-mips64-mipspro

@@ -34,14 +34,9 @@ fi
 
 set -x
 make distclean
-aclocal
-autoheader
-libtoolize --automake --force
-automake --force --add-missing
-autoconf
 
-(cd bdb/dist && sh s_all)
-(cd innobase && aclocal && autoheader && aclocal && automake && autoconf)
+path=`dirname $0`
+. "$path/autorun.sh"
 
 # C options:
 # -apo          - auto-parallize for multiprocessors (implies -mp)

BUILD/compile-pentium-pgcc

@@ -2,13 +2,9 @@ AM_MAKEFLAGS="-j 2"
 gmake -k clean || true
 /bin/rm -f */.deps/*.P config.cache
  
-aclocal && autoheader && aclocal && automake && autoconf
-(cd bdb/dist && sh s_all)
-(cd innobase && aclocal && autoheader && aclocal && automake && autoconf)
-if [ -d gemini ]
-then
-   (cd gemini && aclocal && autoheader && aclocal && automake && autoconf)
-fi
+
+path=`dirname $0`
+. "$path/autorun.sh"
  
 export PATH=/usr/local/pgcc/bin:$PATH
 CFLAGS="-Wimplicit -Wreturn-type -Wid-clash-51 -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wimplicit-function-dec -Wimplicit-int -Wparentheses -Wsign-compare -Wwrite-strings -Wunused  -O6 -mpentiumpro -fomit-frame-pointer -mstack-align-double" CXX=gcc CXXFLAGS="-Wimplicit -Wreturn-type -Wid-clash-51 -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wimplicit-function-dec -Wimplicit-int -Wparentheses -Wsign-compare -Wwrite-strings -Woverloaded-virtual -Wextern-inline -Wsign-promo -Wreorder -Wctor-dtor-privacy -Wnon-virtual-dtor -felide-constructors -fno-exceptions -fno-rtti -O6 -fomit-frame-pointer -mpentiumpro -mstack-align-double" ./configure --prefix=/usr/local/mysql --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-mysqld-ldflags=-all-static  --with-client-ldflags=-all-static

BUILD/compile-solaris-sparc

@@ -3,14 +3,9 @@
 gmake -k clean || true
 /bin/rm -f */.deps/*.P config.cache
  
-aclocal && autoheader && aclocal && automake && autoconf
-(cd bdb/dist && sh s_all)
-(cd innobase && aclocal && autoheader && aclocal && automake && autoconf)
-if [ -d gemini ]
-then
-   (cd gemini && aclocal && autoheader && aclocal && automake && autoconf)
-fi
- 
+path=`dirname $0`
+. "$path/autorun.sh"
+
 CFLAGS="-g -Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparentheses -Wsign-compare -Wwrite-strings -Wunused  -O3 -fno-omit-frame-pointer -mcpu=v8 -Wa,-xarch=v8plusa" CXX=gcc CXXFLAGS="-Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparentheses -Wsign-compare -Wwrite-strings -Woverloaded-virtual -Wsign-promo -Wreorder -Wctor-dtor-privacy -Wnon-virtual-dtor -felide-constructors -fno-exceptions -fno-rtti  -O3 -fno-omit-frame-pointer -mcpu=v8 -Wa,-xarch=v8plusa -g" ./configure --prefix=/usr/local/mysql --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client
 
 gmake -j 4

BUILD/compile-solaris-sparc-debug

@@ -3,13 +3,8 @@
 gmake -k clean || true
 /bin/rm -f */.deps/*.P config.cache
  
-aclocal && autoheader && aclocal && automake && autoconf
-(cd bdb/dist && sh s_all)
-(cd innobase && aclocal && autoheader && aclocal && automake && autoconf)
-if [ -d gemini ]
-then
-   (cd gemini && aclocal && autoheader && aclocal && automake && autoconf)
-fi
+path=`dirname $0`
+. "$path/autorun.sh"
  
 CFLAGS="-g -Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparentheses -Wsign-compare -Wwrite-strings -Wunused  -O3 -fno-omit-frame-pointer -mcpu=v8 -Wa,-xarch=v8plusa" CXX=gcc CXXFLAGS="-Wimplicit -Wreturn-type -Wid-clash-51 -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparentheses -Wsign-compare -Wwrite-strings -Woverloaded-virtual -Wsign-promo -Wreorder -Wctor-dtor-privacy -Wnon-virtual-dtor -felide-constructors -fno-exceptions -fno-rtti  -O3 -fno-omit-frame-pointer -mcpu=v8 -Wa,-xarch=v8plusa -g" ./configure --prefix=/usr/local/mysql --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-debug
 

BUILD/compile-solaris-sparc-forte

@@ -3,13 +3,8 @@
 gmake -k clean || true
 /bin/rm -f */.deps/*.P config.cache
  
-aclocal && autoheader && aclocal && automake && autoconf
-(cd bdb/dist && sh s_all)
-(cd innobase && aclocal && autoheader && aclocal && automake && autoconf)
-if [ -d gemini ]
-then
-   (cd gemini && aclocal && autoheader && aclocal && automake && autoconf)
-fi
+path=`dirname $0`
+. "$path/autorun.sh"
 
 
 # Assume Forte is installed in /opt/SUNWSpro

BUILD/compile-solaris-sparc-purify

@@ -33,9 +33,9 @@ done
 
 gmake -k clean || true 
 /bin/rm -f */.deps/*.P config.cache
-aclocal && autoheader && aclocal && automake && autoconf
-(cd bdb/dist && sh s_all)
-(cd innobase && aclocal && autoheader && aclocal && automake && autoconf)
+ 
+path=`dirname $0`
+. "$path/autorun.sh"
 
 CFLAGS="-g -Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wimplicit-int -Wparentheses -Wsign-compare -Wwrite-strings -Wunused  -DHAVE_purify -DEXTRA_DEBUG -O2" CXX=gcc CXXLD=g++ CXXFLAGS="-g -Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparentheses -Wsign-compare -Wwrite-strings -Woverloaded-virtual -Wsign-promo -Wreorder -Wctor-dtor-privacy -Wnon-virtual-dtor -felide-constructors -fno-exceptions -fno-rtti  -DHAVE_purify -DEXTRA_DEBUG -O2" ./configure --prefix=/usr/local/mysql --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-berkeley-db --with-embedded-server --with-innodb $EXTRA_CONFIG_FLAGS
 

install-sh

-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$cpprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0

missing

-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-case "$1" in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing 0.3 - GNU automake"
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-  aclocal)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  tar)
-    shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar ${1+"$@"} && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar ${1+"$@"} && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case "$firstarg" in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" ${1+"$@"} && exit 0
-	    ;;
-	esac
-	case "$firstarg" in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" ${1+"$@"} && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequirements for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0

mkinstalldirs

-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-errstatus=0
-
-for file
-do
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
-
-   pathcomp=
-   for d
-   do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
-
-     if test ! -d "$pathcomp"; then
-        echo "mkdir $pathcomp" 1>&2
-
-        mkdir "$pathcomp" || lasterr=$?
-
-        if test ! -d "$pathcomp"; then
-  	  errstatus=$lasterr
-        fi
-     fi
-
-     pathcomp="$pathcomp/"
-   done
-done
-
-exit $errstatus
-
-# mkinstalldirs ends here