Remove generated files from bdb source code control.

bdb/build_win32/include.tcl

-set tclsh_path SET_YOUR_TCLSH_PATH
-set test_path ../test
-set tcllib ./Debug/libdb_tcl32d.dll
-
-set KILL ./dbkill.exe
-
-# DO NOT EDIT BELOW THIS LINE: automatically built by dist/s_tcl.
-
-global dict
-global testdir
-global util_path
-set testdir ./TESTDIR
-
-global is_hp_test
-global is_qnx_test
-global is_windows_test

bdb/build_win32/libdb.rc

-1 VERSIONINFO
- FILEVERSION 3,0,2,9
- PRODUCTVERSION 3,0,2,9
- FILEFLAGSMASK 0x3fL
-#ifdef _DEBUG
- FILEFLAGS 0x1L
-#else
- FILEFLAGS 0x0L
-#endif
- FILEOS 0x4L
- FILETYPE 0x2L
- FILESUBTYPE 0x0L
-
-BEGIN
-    BLOCK "StringFileInfo"
-    BEGIN
-        BLOCK "040904b0"
-        BEGIN
-            VALUE "CompanyName", "Sleepycat Software\0"
-            VALUE "FileDescription", "Berkeley DB 3.0 DLL\0"
-            VALUE "FileVersion", "3.2.9\0"
-            VALUE "InternalName", "libdb.dll\0"
-            VALUE "LegalCopyright", "Copyright  Sleepycat Software Inc. 1997, 1998, 1999, 2000\0"
-            VALUE "OriginalFilename", "libdb.dll\0"
-            VALUE "ProductName", "Sleepycat Software libdb\0"
-            VALUE "ProductVersion", "3.2.9\0"
-        END
-    END
-    BLOCK "VarFileInfo"
-    BEGIN
-        VALUE "Translation", 0x409, 1200
-    END
-END

bdb/dist/build/chk.def

-#!/bin/sh -
-#
-# $Id: chk.def,v 1.4 2000/12/12 18:20:59 bostic Exp $
-#
-# Check to make sure we haven't forgotten to add any interfaces
-# to the Win32 libdb.def file.
-
-# Run from the top-level directory.
-[ -f db_config.h ] && cd ..
-
-f=build_win32/libdb.def
-t1=/tmp/__1
-t2=/tmp/__2
-
-sed '/; /d' $f |
-    egrep @ |
-    awk '{print $1}' |
-    sed -e '/db_xa_switch/d' \
-	-e '/^__/d' -e '/^;/d' |
-    sort > ${t1}
-
-egrep __P include/db.src |
-    sed '/^[a-z]/!d' |
-    awk '{print $2}' |
-    sed 's/^\*//' |
-    sed '/^__/d' | sort > ${t2}
-
-if cmp -s ${t1} ${t2} ; then
-	:
-else
-	echo "<<< libdb.def"
-	echo ">>> DB include files"
-	diff ${t1} ${t2}
-fi
-
-# Check to make sure we don't have any extras in the libdb.def file.
-sed '/; /d' $f |
-    egrep @ |
-    awk '{print $1}' |
-    sed -e '/__db_global_values/d' > ${t1}
-
-for i in `cat ${t1}`; do
-	if egrep $i */*.c > /dev/null; then
-		:
-	else
-		echo "$f: $i not found in DB sources"
-	fi
-done
-
-rm -f ${t1} ${t2}

bdb/dist/build/chk.define

-#!/bin/sh -
-#
-# $Id: chk.define,v 1.8 2000/12/12 18:20:59 bostic Exp $
-#
-# Check to make sure that all #defines are actually used.
-
-# Run from the top-level directory.
-[ -f db_config.h ] && cd ..
-
-t1=/tmp/__1
-
-egrep '^#define' include/*.h |
-    sed -e '/db_185.h/d' -e '/xa.h/d' |
-    awk '{print $2}' |
-    sed -e '/^B_DELETE/d' \
-	-e '/^B_MAX/d' \
-	-e '/^CIRCLEQ/d' \
-	-e '/^DB_RO_ACCESS/d' \
-	-e '/^DEFINE_DB_CLASS/d' \
-	-e '/^LIST/d' \
-	-e '/^LOG_OP/d' \
-	-e '/^MINFILL/d' \
-	-e '/^MUTEX_FIELDS/d' \
-	-e '/^NCACHED2X/d' \
-	-e '/^NCACHED30/d' \
-	-e '/^PAIR_MASK/d' \
-	-e '/^POWER_OF_TWO/d' \
-	-e '/^P_16_COPY/d' \
-	-e '/^P_32_COPY/d' \
-	-e '/^P_32_SWAP/d' \
-	-e '/^SH_CIRCLEQ/d' \
-	-e '/^SH_LIST/d' \
-	-e '/^SH_TAILQ/d' \
-	-e '/^TAILQ/d' \
-	-e '/UNUSED/d' \
-	-e '/^WRAPPED_CLASS/d' \
-	-e '/^XA_$/d' \
-	-e '/^_DB_SERVER_H_RPCGEN/d' \
-	-e '/_AUTO_H$/d' \
-	-e '/_H_$/d' \
-        -e '/ext_h_/d' \
-        -e '/^i_/d' \
-	-e 's/(.*//' | sort > ${t1}
-
-for i in `cat ${t1}`; do
-	if egrep -w $i */*.c */*.cpp > /dev/null; then
-		:;
-	else
-		f=`egrep -l $i include/*.h |
-		    sed 's;include/;;' | tr -s "[:space:]" " "`
-		echo "$i: $f"
-	fi
-done | sort +1
-
-rm -f ${t1}

bdb/dist/build/chk.offt

-#!/bin/sh -
-#
-# $Id: chk.offt,v 1.3 2000/12/12 18:20:59 bostic Exp $
-#
-# Make sure that no off_t's have snuck into the release.
-
-# Run from the top-level directory.
-[ -f db_config.h ] && cd ..
-
-egrep -w off_t */*.[ch] |
-sed -e "/#undef off_t/d" \
-    -e "/mp_fopen.c:.*can't use off_t's here/d" \
-    -e "/mp_fopen.c:.*size or type off_t's or/d" \
-    -e "/mp_fopen.c:.*where an off_t is 32-bits/d" \
-    -e "/os_map.c:.*(off_t)0))/d" \
-    -e "/os_rw.c:.*(off_t)db_iop->pgno/d" \
-    -e "/os_seek.c:.*off_t offset;/d" \
-    -e "/os_seek.c:.*offset = /d" \
-    -e "/test_vxworks\/vx_mutex.c:/d"

bdb/dist/build/chk.srcfiles

-#!/bin/sh -
-#
-# $Id: chk.srcfiles,v 1.3 2000/12/12 18:20:59 bostic Exp $
-#
-# Check to make sure we haven't forgotten to add any files to the list
-# of source files Win32 uses to build its dsp files.
-
-# Run from the top-level directory.
-[ -f db_config.h ] && cd ..
-
-f=dist/srcfiles.in
-t1=/tmp/__1
-t2=/tmp/__2
-
-sed -e '/^[ 	#]/d' \
-    -e '/^$/d' < $f |
-    awk '{print $1}' > ${t1}
-find . -type f |
-    sed -e 's/^\.\///' |
-    egrep '\.c$|\.cpp$|\.def$|\.rc$' |
-    sed -e '/dist\/build\/chk.def/d' \
-        -e '/perl.DB_File\/version.c/d' |
-    sort > ${t2}
-
-cmp ${t1} ${t2} > /dev/null ||
-(echo "<<< srcfiles.in >>> existing files" && \
-    diff ${t1} ${t2} | tee /tmp/_f)
-
-rm -f ${t1} ${t2}

bdb/dist/build/chk.tags

-#!/bin/sh -
-#
-# $Id: chk.tags,v 1.5 2000/12/22 15:35:32 bostic Exp $
-#
-# Check to make sure we don't need any more symbolic links to tags files.
-
-# Run from the top-level directory.
-[ -f db_config.h ] && cd ..
-
-t1=/tmp/__1
-t2=/tmp/__2
-
-(ls -F | egrep / | sort |
-    sed -e 's/\///' \
-	-e '/^CVS$/d' \
-	-e '/^build_vxworks$/d' \
-	-e '/^build_win32$/d' \
-	-e '/^docs$/d' \
-	-e '/^docs.text$/d' \
-	-e '/^docs_src$/d' \
-	-e '/^docs_text$/d' \
-	-e '/^java$/d' \
-	-e '/^perl.BerkeleyDB$/d' \
-	-e '/^perl.DB_File$/d' \
-	-e '/^test$/d' \
-	-e '/^test_purify$/d' \
-	-e '/^test_thread$/d' \
-	-e '/^test_vxworks$/d') > ${t1}
-
-(ls */tags | sed 's/\/tags$//' | sort) > ${t2}
-if diff ${t1} ${t2} > /dev/null; then
-	:
-else
-	echo "<<< source tree"
-	echo ">>> tags files"
-	diff ${t1} ${t2}
-fi
-
-rm -f ${t1} ${t2}

bdb/dist/config.hin

-/* config.hin.  Generated automatically from configure.in by autoheader.  */
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define if your struct stat has st_blksize.  */
-#undef HAVE_ST_BLKSIZE
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef mode_t
-
-/* Define to `long' if <sys/types.h> doesn't define.  */
-#undef off_t
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef pid_t
-
-/* Define to `unsigned' if <sys/types.h> doesn't define.  */
-#undef size_t
-
-/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
-#undef STAT_MACROS_BROKEN
-
-/* Define if you have the ANSI C header files.  */
-#undef STDC_HEADERS
-
-/* Define if you can safely include both <sys/time.h> and <time.h>.  */
-#undef TIME_WITH_SYS_TIME
-
-/* Define if your processor stores words with the most significant
-   byte first (like Motorola and SPARC, unlike Intel and VAX).  */
-#undef WORDS_BIGENDIAN
-
-/* Define if you are building a version for running the test suite. */
-#undef CONFIG_TEST
-
-/* Define if you want a debugging version. */
-#undef DEBUG
-
-/* Define if you want a version that logs read operations. */
-#undef DEBUG_ROP
-
-/* Define if you want a version that logs write operations. */
-#undef DEBUG_WOP
-
-/* Define if you want a version with run-time diagnostic checking. */
-#undef DIAGNOSTIC
-
-/* Define if you want to mask harmless unitialized memory read/writes. */
-#undef UMRW
-
-/* Define if fcntl/F_SETFD denies child access to file descriptors. */
-#undef HAVE_FCNTL_F_SETFD
-
-/* Define if building big-file environment (e.g., AIX, HP/UX, Solaris). */
-#undef HAVE_FILE_OFFSET_BITS
-
-/* Mutex possibilities. */
-#undef HAVE_MUTEX_68K_GCC_ASSEMBLY
-#undef HAVE_MUTEX_AIX_CHECK_LOCK
-#undef HAVE_MUTEX_ALPHA_GCC_ASSEMBLY
-#undef HAVE_MUTEX_HPPA_GCC_ASSEMBLY
-#undef HAVE_MUTEX_HPPA_MSEM_INIT
-#undef HAVE_MUTEX_IA64_GCC_ASSEMBLY
-#undef HAVE_MUTEX_MACOS
-#undef HAVE_MUTEX_MSEM_INIT
-#undef HAVE_MUTEX_PPC_GCC_ASSEMBLY
-#undef HAVE_MUTEX_PTHREADS
-#undef HAVE_MUTEX_RELIANTUNIX_INITSPIN
-#undef HAVE_MUTEX_SCO_X86_CC_ASSEMBLY
-#undef HAVE_MUTEX_SEMA_INIT
-#undef HAVE_MUTEX_SGI_INIT_LOCK
-#undef HAVE_MUTEX_SOLARIS_LOCK_TRY
-#undef HAVE_MUTEX_SOLARIS_LWP
-#undef HAVE_MUTEX_SPARC_GCC_ASSEMBLY
-#undef HAVE_MUTEX_THREADS
-#undef HAVE_MUTEX_UI_THREADS
-#undef HAVE_MUTEX_UTS_CC_ASSEMBLY
-#undef HAVE_MUTEX_VMS
-#undef HAVE_MUTEX_VXWORKS
-#undef HAVE_MUTEX_WIN16
-#undef HAVE_MUTEX_WIN32
-#undef HAVE_MUTEX_X86_GCC_ASSEMBLY
-
-/* Define if building on QNX. */
-#undef HAVE_QNX
-
-/* Define if building RPC client/server. */
-#undef HAVE_RPC
-
-/* Define if your sprintf returns a pointer, not a length. */
-#undef SPRINTF_RET_CHARPNT
-
-/* Define if you have the getcwd function.  */
-#undef HAVE_GETCWD
-
-/* Define if you have the getopt function.  */
-#undef HAVE_GETOPT
-
-/* Define if you have the getuid function.  */
-#undef HAVE_GETUID
-
-/* Define if you have the memcmp function.  */
-#undef HAVE_MEMCMP
-
-/* Define if you have the memcpy function.  */
-#undef HAVE_MEMCPY
-
-/* Define if you have the memmove function.  */
-#undef HAVE_MEMMOVE
-
-/* Define if you have the mlock function.  */
-#undef HAVE_MLOCK
-
-/* Define if you have the mmap function.  */
-#undef HAVE_MMAP
-
-/* Define if you have the munlock function.  */
-#undef HAVE_MUNLOCK
-
-/* Define if you have the munmap function.  */
-#undef HAVE_MUNMAP
-
-/* Define if you have the pread function.  */
-#undef HAVE_PREAD
-
-/* Define if you have the pstat_getdynamic function.  */
-#undef HAVE_PSTAT_GETDYNAMIC
-
-/* Define if you have the pwrite function.  */
-#undef HAVE_PWRITE
-
-/* Define if you have the qsort function.  */
-#undef HAVE_QSORT
-
-/* Define if you have the raise function.  */
-#undef HAVE_RAISE
-
-/* Define if you have the sched_yield function.  */
-#undef HAVE_SCHED_YIELD
-
-/* Define if you have the select function.  */
-#undef HAVE_SELECT
-
-/* Define if you have the shmget function.  */
-#undef HAVE_SHMGET
-
-/* Define if you have the snprintf function.  */
-#undef HAVE_SNPRINTF
-
-/* Define if you have the strcasecmp function.  */
-#undef HAVE_STRCASECMP
-
-/* Define if you have the strerror function.  */
-#undef HAVE_STRERROR
-
-/* Define if you have the strtoul function.  */
-#undef HAVE_STRTOUL
-
-/* Define if you have the sysconf function.  */
-#undef HAVE_SYSCONF
-
-/* Define if you have the vsnprintf function.  */
-#undef HAVE_VSNPRINTF
-
-/* Define if you have the yield function.  */
-#undef HAVE_YIELD
-
-/* Define if you have the <dirent.h> header file.  */
-#undef HAVE_DIRENT_H
-
-/* Define if you have the <ndir.h> header file.  */
-#undef HAVE_NDIR_H
-
-/* Define if you have the <sys/dir.h> header file.  */
-#undef HAVE_SYS_DIR_H
-
-/* Define if you have the <sys/ndir.h> header file.  */
-#undef HAVE_SYS_NDIR_H
-
-/* Define if you have the <sys/select.h> header file.  */
-#undef HAVE_SYS_SELECT_H
-
-/* Define if you have the <sys/time.h> header file.  */
-#undef HAVE_SYS_TIME_H
-
-/* Define if you have the nsl library (-lnsl).  */
-#undef HAVE_LIBNSL
-
-/*
- * Big-file configuration.
- */
-#ifdef	HAVE_FILE_OFFSET_BITS
-#define	_FILE_OFFSET_BITS	64
-#endif
-
-/*
- * Don't step on the namespace.  Other libraries may have their own
- * implementations of these functions, we don't want to use their
- * implementations or force them to use ours based on the load order.
- */
-#ifndef	HAVE_GETCWD
-#define	getcwd		__db_Cgetcwd
-#endif
-#ifndef	HAVE_GETOPT
-#define	getopt		__db_Cgetopt
-#endif
-#ifndef	HAVE_MEMCMP
-#define	memcmp		__db_Cmemcmp
-#endif
-#ifndef	HAVE_MEMCPY
-#define	memcpy		__db_Cmemcpy
-#endif
-#ifndef	HAVE_MEMMOVE
-#define	memmove		__db_Cmemmove
-#endif
-#ifndef	HAVE_RAISE
-#define	raise		__db_Craise
-#endif
-#ifndef	HAVE_SNPRINTF
-#define	snprintf	__db_Csnprintf
-#endif
-#ifndef	HAVE_STRCASECMP
-#define	strcasecmp	__db_Cstrcasecmp
-#endif
-#ifndef	HAVE_STRERROR
-#define	strerror	__db_Cstrerror
-#endif
-#ifndef	HAVE_VSNPRINTF
-#define	vsnprintf	__db_Cvsnprintf
-#endif

bdb/dist/install-sh

-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=$mkdirprog
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-	'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0

bdb/dist/template/rec_log

-#include "db_config.h"
-
-#ifndef NO_SYSTEM_INCLUDES
-#include <sys/types.h>
-
-#include <string.h>
-#endif
-
-#include "db_int.h"
-#include "db_page.h"
-#include "log.h"
-#include "log.h"
-
-/*
- * __log_register1_recover --
- *	Recovery function for register1.
- *
- * PUBLIC: int __log_register1_recover
- * PUBLIC:   __P((DB_ENV *, DBT *, DB_LSN *, db_recops, void *));
- */
-int
-__log_register1_recover(dbenv, dbtp, lsnp, op, info)
-	DB_ENV *dbenv;
-	DBT *dbtp;
-	DB_LSN *lsnp;
-	db_recops op;
-	void *info;
-{
-	__log_register1_args *argp;
-	DB *file_dbp;
-	DBC *dbc;
-	DB_MPOOLFILE *mpf;
-	PAGE *pagep;
-	int cmp_n, cmp_p, modified, ret;
-
-	REC_PRINT(__log_register1_print);
-	REC_INTRO(__log_register1_read);
-
-	if ((ret = memp_fget(mpf, &argp->pgno, 0, &pagep)) != 0)
-		if (DB_REDO(op)) {
-			if ((ret = memp_fget(mpf,
-			    &argp->pgno, DB_MPOOL_CREATE, &pagep)) != 0)
-				goto out;
-		} else {
-			*lsnp = argp->prev_lsn;
-			ret = 0;
-			goto out;
-		}
-
-	modified = 0;
-	cmp_n = log_compare(lsnp, &LSN(pagep));
-
-	/*
-	 * Use this when there is something like "pagelsn" in the argp
-	 * structure.  Sometimes, you might need to compare meta-data
-	 * lsn's instead.
-	 *
-	 * cmp_p = log_compare(&LSN(pagep), argp->pagelsn);
-	 */
-	if (cmp_p == 0 && DB_REDO(op)) {
-		/* Need to redo update described. */
-		modified = 1;
-	} else if (cmp_n == 0 && !DB_REDO(op)) {
-		/* Need to undo update described. */
-		modified = 1;
-	}
-	if (ret = memp_fput(mpf, pagep, modified ? DB_MPOOL_DIRTY : 0))
-		goto out;
-
-	*lsnp = argp->prev_lsn;
-	ret = 0;
-
-out:	REC_CLOSE;
-}
-
-/*
- * __log_register_recover --
- *	Recovery function for register.
- *
- * PUBLIC: int __log_register_recover
- * PUBLIC:   __P((DB_ENV *, DBT *, DB_LSN *, db_recops, void *));
- */
-int
-__log_register_recover(dbenv, dbtp, lsnp, op, info)
-	DB_ENV *dbenv;
-	DBT *dbtp;
-	DB_LSN *lsnp;
-	db_recops op;
-	void *info;
-{
-	__log_register_args *argp;
-	DB *file_dbp;
-	DBC *dbc;
-	DB_MPOOLFILE *mpf;
-	PAGE *pagep;
-	int cmp_n, cmp_p, modified, ret;
-
-	REC_PRINT(__log_register_print);
-	REC_INTRO(__log_register_read);
-
-	if ((ret = memp_fget(mpf, &argp->pgno, 0, &pagep)) != 0)
-		if (DB_REDO(op)) {
-			if ((ret = memp_fget(mpf,
-			    &argp->pgno, DB_MPOOL_CREATE, &pagep)) != 0)
-				goto out;
-		} else {
-			*lsnp = argp->prev_lsn;
-			ret = 0;
-			goto out;
-		}
-
-	modified = 0;
-	cmp_n = log_compare(lsnp, &LSN(pagep));
-
-	/*
-	 * Use this when there is something like "pagelsn" in the argp
-	 * structure.  Sometimes, you might need to compare meta-data
-	 * lsn's instead.
-	 *
-	 * cmp_p = log_compare(&LSN(pagep), argp->pagelsn);
-	 */
-	if (cmp_p == 0 && DB_REDO(op)) {
-		/* Need to redo update described. */
-		modified = 1;
-	} else if (cmp_n == 0 && !DB_REDO(op)) {
-		/* Need to undo update described. */
-		modified = 1;
-	}
-	if (ret = memp_fput(mpf, pagep, modified ? DB_MPOOL_DIRTY : 0))
-		goto out;
-
-	*lsnp = argp->prev_lsn;
-	ret = 0;
-
-out:	REC_CLOSE;
-}
-

bdb/include/crdel_auto.h

-/* Do not edit: automatically built by gen_rec.awk. */
-
-#ifndef	crdel_AUTO_H
-#define	crdel_AUTO_H
-
-#define	DB_crdel_fileopen	141
-typedef struct _crdel_fileopen_args {
-	u_int32_t type;
-	DB_TXN *txnid;
-	DB_LSN prev_lsn;
-	DBT	name;
-	u_int32_t	mode;
-} __crdel_fileopen_args;
-
-int __crdel_fileopen_log __P((DB_ENV *, DB_TXN *, DB_LSN *, u_int32_t, const DBT *, u_int32_t));
-int __crdel_fileopen_print __P((DB_ENV *, DBT *, DB_LSN *, db_recops, void *));
-int __crdel_fileopen_read __P((DB_ENV *, void *, __crdel_fileopen_args **));
-
-#define	DB_crdel_metasub	142
-typedef struct _crdel_metasub_args {
-	u_int32_t type;
-	DB_TXN *txnid;
-	DB_LSN prev_lsn;
-	int32_t	fileid;
-	db_pgno_t	pgno;
-	DBT	page;
-	DB_LSN	lsn;
-} __crdel_metasub_args;
-
-int __crdel_metasub_log __P((DB_ENV *, DB_TXN *, DB_LSN *, u_int32_t, int32_t, db_pgno_t, const DBT *, DB_LSN *));
-int __crdel_metasub_print __P((DB_ENV *, DBT *, DB_LSN *, db_recops, void *));
-int __crdel_metasub_read __P((DB_ENV *, void *, __crdel_metasub_args **));
-
-#define	DB_crdel_metapage	143
-typedef struct _crdel_metapage_args {
-	u_int32_t type;
-	DB_TXN *txnid;
-	DB_LSN prev_lsn;
-	int32_t	fileid;
-	DBT	name;
-	db_pgno_t	pgno;
-	DBT	page;
-} __crdel_metapage_args;
-
-int __crdel_metapage_log __P((DB_ENV *, DB_TXN *, DB_LSN *, u_int32_t, int32_t, const DBT *, db_pgno_t, const DBT *));
-int __crdel_metapage_print __P((DB_ENV *, DBT *, DB_LSN *, db_recops, void *));
-int __crdel_metapage_read __P((DB_ENV *, void *, __crdel_metapage_args **));
-
-#define	DB_crdel_old_delete	144
-typedef struct _crdel_old_delete_args {
-	u_int32_t type;
-	DB_TXN *txnid;
-	DB_LSN prev_lsn;
-	DBT	name;
-} __crdel_old_delete_args;
-
-int __crdel_old_delete_print __P((DB_ENV *, DBT *, DB_LSN *, db_recops, void *));
-int __crdel_old_delete_read __P((DB_ENV *, void *, __crdel_old_delete_args **));
-
-#define	DB_crdel_rename	145
-typedef struct _crdel_rename_args {
-	u_int32_t type;
-	DB_TXN *txnid;
-	DB_LSN prev_lsn;
-	int32_t	fileid;
-	DBT	name;
-	DBT	newname;
-} __crdel_rename_args;
-
-int __crdel_rename_log __P((DB_ENV *, DB_TXN *, DB_LSN *, u_int32_t, int32_t, const DBT *, const DBT *));
-int __crdel_rename_print __P((DB_ENV *, DBT *, DB_LSN *, db_recops, void *));
-int __crdel_rename_read __P((DB_ENV *, void *, __crdel_rename_args **));
-
-#define	DB_crdel_delete	146
-typedef struct _crdel_delete_args {
-	u_int32_t type;
-	DB_TXN *txnid;
-	DB_LSN prev_lsn;
-	int32_t	fileid;
-	DBT	name;
-} __crdel_delete_args;
-
-int __crdel_delete_log __P((DB_ENV *, DB_TXN *, DB_LSN *, u_int32_t, int32_t, const DBT *));
-int __crdel_delete_print __P((DB_ENV *, DBT *, DB_LSN *, db_recops, void *));
-int __crdel_delete_read __P((DB_ENV *, void *, __crdel_delete_args **));
-int __crdel_init_print __P((DB_ENV *));
-int __crdel_init_recover __P((DB_ENV *));
-#endif

bdb/include/log_auto.h

-/* Do not edit: automatically built by gen_rec.awk. */
-
-#ifndef	log_AUTO_H
-#define	log_AUTO_H
-
-#define	DB_log_register1	1
-typedef struct _log_register1_args {
-	u_int32_t type;
-	DB_TXN *txnid;
-	DB_LSN prev_lsn;
-	u_int32_t	opcode;
-	DBT	name;
-	DBT	uid;
-	int32_t	fileid;
-	DBTYPE	ftype;
-} __log_register1_args;
-
-int __log_register1_print __P((DB_ENV *, DBT *, DB_LSN *, db_recops, void *));
-int __log_register1_read __P((DB_ENV *, void *, __log_register1_args **));
-
-#define	DB_log_register	2
-typedef struct _log_register_args {
-	u_int32_t type;
-	DB_TXN *txnid;
-	DB_LSN prev_lsn;
-	u_int32_t	opcode;
-	DBT	name;
-	DBT	uid;
-	int32_t	fileid;
-	DBTYPE	ftype;
-	db_pgno_t	meta_pgno;
-} __log_register_args;
-
-int __log_register_log __P((DB_ENV *, DB_TXN *, DB_LSN *, u_int32_t, u_int32_t, const DBT *, const DBT *, int32_t, DBTYPE, db_pgno_t));
-int __log_register_print __P((DB_ENV *, DBT *, DB_LSN *, db_recops, void *));
-int __log_register_read __P((DB_ENV *, void *, __log_register_args **));
-int __log_init_print __P((DB_ENV *));
-int __log_init_recover __P((DB_ENV *));
-#endif

bdb/test/include.tcl

-set tclsh_path @TCL_TCLSH@
-set tcllib .libs/libdb_tcl-@DB_VERSION_MAJOR@.@DB_VERSION_MINOR@.@SOSUFFIX@
-set rpc_server localhost
-set rpc_path .
-set test_path @srcdir@/../test
-
-set KILL "@db_cv_path_kill@"
-
-# DO NOT EDIT BELOW THIS LINE: automatically built by dist/s_tcl.
-
-global dict
-global testdir
-global util_path
-set testdir ./TESTDIR
-set rpc_testdir $rpc_path/TESTDIR
-
-global is_hp_test
-global is_qnx_test
-global is_windows_test