Fixes to bugs and compiler warnings detected by pushbuild

Don't compare uuid's on maria_open() if table is not transactional
Fixed that my_microtime() works on windows (patch added from 5.1)


mysql-test/r/create.result:
  Portability fix
mysql-test/t/create.test:
  Portability fix
mysql-test/t/maria.test:
  Remove warnings, to make test portable to windows
mysys/my_getsystime.c:
  Add missed merge from 5.1
  This fixes that timing works on windows and fixes that that failed becasuse slow_query_log didn't get any queries
storage/maria/ma_check.c:
  Removed not needed setting of variable
storage/maria/ma_loghandler.c:
  Fixed compiler warnings
storage/maria/ma_open.c:
  Don't compare uuid's if table is not transactional
KNOWN_BUGS.txt:
  New BitKeeper file ``KNOWN_BUGS.txt''

KNOWN_BUGS.txt

+This file should contain all know fatal bugs in the Maria storage
+engine for the last source or binary release.  Minor bugs, extensions
+and feature request and bugs found since this release can be find in the
+MySQL bugs databases at: http://bugs.mysql.com/
+
+There shouldn't normally be any bugs that affects normal operations in
+any Maria release.  Still, there are always exceptions and edge cases
+and that's what this file is for.
+
+For the first few Alpha releases of Maria there may be some edge cases
+that crashes during recovery; We don't like that but we think it's
+better to get the Maria alpha out early to get things tested and get
+more developers on the code early than wait until these are fixed.  We
+do however think that the bugs are not seriously enough to stop anyone
+from starting to test and even use Maria for real (as long as they are
+prepared to upgrade to next MySQL-Maria release ASAP).
+
+If you have found a bug that is not listed here, please add it to
+http://bugs.mysql.com/ so that we can either fix it for next release
+or in the worst case add it here for others to know!
+
+
+Known bugs that are planned to be fixed before next minor release
+=================================================================
+
+- If mysqld crashed or is killed during REPAIR or OPTIMIZE, Maria will not
+  be able to automaticly repair the table again;  You must manually run
+  REPAIR on the table again after mysqld is started.
+
+- If mysqld crashes during batch insert into an empty table,
+  (This includes LOAD DATA INFILE, SELECT ... INSERT and INSERT (many rows))
+  Maria repair may not be able to recreate the empty table. In this case
+  You must manually run either REPAIR TABLE or TRUNCATE to fix the table.
+
+- If the log files are damaged or inconsistent, Maria may fail to start.
+  We should fix that if this happens and mysqld is restarted (thanks to
+  mysqld_safe, instance manager or other script) it should disregard the
+  old logs, start anyway and automaticly repair any tables that was found
+  to be crashed on open.
+  Temporary fix is to remove or maria_log.???????? files from the data
+  directory, restart mysqld and run CHECK TABLE / REPAIR TABLE or 
+  mysqlcheck on your Maria tables
+
+
+Known bugs that are planned to be fixed before Beta
+===================================================
+
+- If we get a write failure on disk (disk full or disk error) for the
+  log, we should stop all usage of transactional tables and mark all
+  transactional tables that are changed as crashed.
+  For the moment, if this happens, you have to take down mysqld,
+  remove all logs, restart mysqld and repair your tables.
+
+  If you get the related error:
+  "Disk is full writing '/usr/local/mysql/var/maria_log.????????' (Errcode: 28)
+   Waiting for someone to free space..."
+  you should either free disk space, in which Maria will continue as before
+  or kill mysqld, remove logs and repair tables.
+
+
+Missing features that is planned to fix before Beta
+===================================================
+
+- We will add an maria-recover option to automaticly repair any
+  crashed tables on open. (This is needed for not transactional tables
+  and also in edge cases for transactional tables when the table
+  crashed because of a bug in  MySQL or Maria code)
+- Multiple concurrent inserts & multiple concurrent readers at same time
+  with full MVCC control.  Note that UPDATE and DELETE will still be
+  blocking (as with MyISAM)
+- COUNT(*) and TABLE CHECKSUM under MVCC (ie, they are instant and kept up
+  to date even with multiple inserter)
+- Recovery of fulltext and GIS indexes.
+
+
+Features planned for future releases
+====================================
+
+http://forge.mysql.com/worklog/

mysql-test/r/create.result

@@ -1717,7 +1717,7 @@ t1	CREATE TABLE `t1` (
   `TIME` bigint(7) NOT NULL DEFAULT '0',
   `STATE` varchar(64) DEFAULT NULL,
   `INFO` longtext
-) ENGINE=MARIA DEFAULT CHARSET=utf8
+)  DEFAULT CHARSET=utf8
 drop table t1;
 create temporary table t1 like information_schema.processlist;
 show create table t1;

mysql-test/t/create.test

@@ -1332,7 +1332,7 @@ drop function f1;
 # Bug#25629 CREATE TABLE LIKE does not work with INFORMATION_SCHEMA
 #
 create table t1 like information_schema.processlist;
---replace_result ENGINE=MyISAM "" ENGINE=Maria "" " PAGE_CHECKSUM=1" ""
+--replace_result ENGINE=MyISAM "" ENGINE=MARIA "" " PAGE_CHECKSUM=1" ""
 show create table t1;
 drop table t1;
 create temporary table t1 like information_schema.processlist;

mysql-test/t/maria.test

@@ -989,7 +989,9 @@ connect (session2,localhost,root,,);
 
 connection session1;
 disable_query_log;
+disable_warnings;
 eval create temporary table t1 (a int) data directory="$MYSQLTEST_VARDIR/tmp" select 9 a;
+enable_warnings;
 enable_query_log;
 disable_result_log;
 show create table t1;
@@ -997,7 +999,10 @@ enable_result_log;
 
 connection session2;
 disable_query_log;
+
+disable_warnings;
 eval create temporary table t1 (a int) data directory="$MYSQLTEST_VARDIR/tmp" select 99 a;
+enable_warnings;
 enable_query_log;
 disable_result_log;
 show create table t1;

mysys/my_getsystime.c

@@ -35,9 +35,9 @@ ulonglong my_getsystime()
   if (query_performance_frequency)
   {
     QueryPerformanceCounter(&t_cnt);
-    return (t_cnt.QuadPart / query_performance_frequency * 10000000+
-            t_cnt.QuadPart % query_performance_frequency * 10000000/
-            query_performance_frequency+query_performance_offset);
+    return ((t_cnt.QuadPart / query_performance_frequency * 10000000) +
+            (t_cnt.QuadPart % query_performance_frequency * 10000000 /
+             query_performance_frequency) + query_performance_offset);
   }
   return 0;
 #elif defined(__NETWARE__)
@@ -108,16 +108,20 @@ ulonglong my_micro_time()
   if (query_performance_frequency)
   {
     QueryPerformanceCounter((LARGE_INTEGER*) &newtime);
-    newtime/= (query_performance_frequency * 1000000);
+    newtime= ((new_time / query_performance_frequency * 10000000) +
+              (new_time % query_performance_frequency * 10000000 /
+               query_performance_frequency));
   }
   else
-    newtime= (GetTickCount() * 1000); /* GetTickCount only returns milliseconds */
+    newtime= (GetTickCount() * 1000); /* GetTickCount only returns millisec. */
   return newtime;
 #elif defined(HAVE_GETHRTIME)
   return gethrtime()/1000;
 #else
   struct timeval t;
-  /* The following loop is here because gettimeofday may fail on some systems */
+  /*
+    The following loop is here because gettimeofday may fail on some systems
+  */
   while (gettimeofday(&t, NULL) != 0)
   {}
   newtime= (ulonglong)t.tv_sec * 1000000 + t.tv_usec;
@@ -131,18 +135,18 @@ ulonglong my_micro_time()
 
   SYNOPSIS
     my_micro_time_and_time()
-    time_arg		Will be set to seconds since epoch (00:00:00 UTC, January 1,
-    			1970)
+    time_arg		Will be set to seconds since epoch (00:00:00 UTC,
+                        January 1, 1970)
 
   NOTES
     This function is to be useful when we need both the time and microtime.
-    For example in MySQL this is used to get the query time start of a query and
-    to measure the time of a query (for the slow query log)
+    For example in MySQL this is used to get the query time start of a query
+    and to measure the time of a query (for the slow query log)
 
   IMPLEMENTATION
     Value of time is as in time() call.
-    Value of microtime is same as my_micro_time(), which may be totally unrealated
-    to time()
+    Value of microtime is same as my_micro_time(), which may be totally
+    unrealated to time()
 
   RETURN
     Value in microseconds from some undefined point in time
@@ -157,16 +161,18 @@ ulonglong my_micro_time_and_time(time_t *time_arg)
   if (query_performance_frequency)
   {
     QueryPerformanceCounter((LARGE_INTEGER*) &newtime);
-    newtime/= (query_performance_frequency * 1000000);
+    newtime= ((new_time / query_performance_frequency * 10000000) +
+              (new_time % query_performance_frequency * 10000000 /
+               query_performance_frequency));
   }
   else
-    newtime= (GetTickCount() * 1000); /* GetTickCount only returns milliseconds */
+    newtime= (GetTickCount() * 1000); /* GetTickCount only returns millisec. */
   (void) time(time_arg);
   return newtime;
 #elif defined(HAVE_GETHRTIME)
   /*
-    Solaris has a very slow time() call. We optimize this by using the very fast
-    gethrtime() call and only calling time() every 1/2 second
+    Solaris has a very slow time() call. We optimize this by using the very
+    fast gethrtime() call and only calling time() every 1/2 second
   */
   static hrtime_t prev_gethrtime= 0;
   static time_t cur_time= 0;
@@ -184,7 +190,9 @@ ulonglong my_micro_time_and_time(time_t *time_arg)
   return cur_gethrtime/1000;
 #else
   struct timeval t;
-  /* The following loop is here because gettimeofday may fail on some systems */
+  /*
+    The following loop is here because gettimeofday may fail on some systems
+  */
   while (gettimeofday(&t, NULL) != 0)
   {}
   *time_arg= t.tv_sec;
@@ -203,8 +211,8 @@ ulonglong my_micro_time_and_time(time_t *time_arg)
 
   NOTES
     This function returns the current time. The microtime argument is only used
-    if my_micro_time() uses a function that can safely be converted to the current
-    time.
+    if my_micro_time() uses a function that can safely be converted to the
+    current time.
 
   RETURN
     current time

storage/maria/ma_check.c

@@ -5907,7 +5907,6 @@ static my_bool create_new_data_handle(MARIA_SORT_PARAM *param, File new_file)
                                         HA_OPEN_COPY | HA_OPEN_FOR_REPAIR)))
     DBUG_RETURN(1);
 
-  info->s->now_transactional= 0;
   new_info= sort_info->new_info;
   _ma_bitmap_set_pagecache_callbacks(&new_info->s->bitmap.file,
                                      new_info->s);

storage/maria/ma_loghandler.c

@@ -2235,7 +2235,7 @@ static uint16 translog_get_total_chunk_length(uchar *page, uint16 offset)
     DBUG_PRINT("info", ("TRANSLOG_CHUNK_LSN"));
     rec_len= translog_variable_record_1group_decode_len(&ptr);
     chunk_len= uint2korr(ptr);
-    header_len= (ptr -start) + 2;
+    header_len= (uint16) (ptr -start) + 2;
     DBUG_PRINT("info", ("rec len: %lu  chunk len: %u  header len: %u",
                         (ulong) rec_len, (uint) chunk_len, (uint) header_len));
     if (chunk_len)
@@ -2998,7 +2998,7 @@ static uint16 translog_get_chunk_header_length(uchar *chunk)
     DBUG_PRINT("info", ("TRANSLOG_CHUNK_LSN"));
     rec_len= translog_variable_record_1group_decode_len(&ptr);
     chunk_len= uint2korr(ptr);
-    header_len= (ptr - start) +2;
+    header_len= (uint16) (ptr - start) +2;
     DBUG_PRINT("info", ("rec len: %lu  chunk len: %u  header len: %u",
                         (ulong) rec_len, (uint) chunk_len, (uint) header_len));
     if (chunk_len)

storage/maria/ma_open.c

@@ -396,7 +396,8 @@ MARIA_HA *maria_open(const char *name, int mode, uint open_flags)
       goto err;
     }
 
-    if (share->state.changed & STATE_NOT_MOVABLE &&
+    if ((share->state.changed & STATE_NOT_MOVABLE) &&
+        share->now_transactional &&
         !(open_flags & HA_OPEN_IGNORE_MOVED_STATE) &&
         memcmp(share->base.uuid, maria_uuid, MY_UUID_SIZE))
     {