Network error happened here, but it can be caused by CR_CONNECTION_ERROR, 
CR_CONN_HOST_ERROR, CR_SERVER_GONE_ERROR, CR_SERVER_LOST, ER_CON_COUNT_ERROR, 
and ER_SERVER_SHUTDOWN. We just check CR_SERVER_LOST here, so the test fails.

To fix the problem, check all errors that can be cause by the master shutdown.

mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
  Added a 'if' sentence to check all errors that can be cause by the master shutdown.
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
  Test result is updated duo to the patch of bug#46931

from test-extra tree.

Changes include improvements to error handling and are based on WL#4685

with gcc 4.3.2

Cleaning up warnings not present in 5.0.

when compiled with Sun Studio compiler).

The thing is that Sun Studio compiler calls destructor of stack
objects when pthread_exit() is called. That triggered an assertion
in DBUG_ENTER()/DBUG_RETURN() validation logic (if DBUG_ENTER() is
used in the beginning of function, all returns should be replaced
by DBUG_RETURN/DBUG_VOID_RETURN macros).

A fix is to explicitly use DBUG_LEAVE macro.

                               value from the index (PRIMARY)


With the fix for BUG#46760, we correctly flag the presence of row_type 
only when it's actually changed and enables the FAST ALTER TABLE which was
disabled with the BUG#39200.

So the changes made by BUG#46760 makes MySQL data dictionaries to be out of 
sync but they are handled already by InnoDB with this BUG#44030.

The test was originally written to handle this but we requested Innodb to
update the test as the data dictionaries were in sync after the fix for 
BUG#39200.

Adjusting the innodb-autoinc testcase as mentioned in the comments.

mysql-test/lib/mtr_cases.pm:
  Re-enable the innodb-autoinc test case for plugin as we have a common
  result file.
mysql-test/r/innodb-autoinc.result:
  Additional Fix for BUG#44030 - Error: (1500) Couldn't read the MAX(ID) autoinc 
                                 value from the index (PRIMARY)
  
  Adjust the innodb-autoinc testcase as the patch for BUG#46760 enables the 
  FAST ALTER TABLE and makes the data dictonaries go out of sync. This is 
  expected in the testcase.
mysql-test/t/innodb-autoinc.test:
  Additional Fix for BUG#44030 - Error: (1500) Couldn't read the MAX(ID) autoinc 
                                 value from the index (PRIMARY)
  
  Adjust the innodb-autoinc testcase as the patch for BUG#46760 enables the 
  FAST ALTER TABLE and makes the data dictonaries go out of sync. This is 
  expected in the testcase.

the fix is reverted from 5.1, mysql-pe as 
unnecessary(no valgrind warnings there).

sql/sql_select.cc:
  the fix is reverted from 5.1, mysql-pe as 
  unnecessary(no valgrind warnings there).

The "socket" variable is not available on Windows even though
the --socket option can be used to specify the pipe name for
local connections that use a named pipe.

The solution is to ensure that the variable is always defined.


mysql-test/r/windows.result:
  Add test case result for Bug#45498
mysql-test/t/windows.test:
  Add test case for Bug#45498
sql/set_var.cc:
  socket variable must always be present.

checksum)"

The problem was that checksum of GEOMETRY type used memory addresses
in the computation, making it un-repeatable thus useless.
(This patch is a backport from 6.0 branch)

mysql-test/r/myisam.result:
  test case for bug35570 that same tables give same checksums
mysql-test/t/myisam.test:
  test case for bug35570 that same tables give same checksums
sql/sql_table.cc:
  Type GEOMETRY is implemented on top of type BLOB, so, just like for BLOB,
  its 'field' contains pointers which it does not make sense to include in
  the checksum; it rather has to be converted to a string and then we can
  compute the checksum.

      
Despite copying the value of the old table's row type
we don't always have to mark row type as being specified.
Innodb uses this to check if it can do fast ALTER TABLE
or not.
Fixed by correctly flagging the presence of row_type 
only when it's actually changed.
Added a test case for 39200.

           But there is no Last_IO_Error reported.

On the master, if a binary log event is larger than max_allowed_packet,
ER_MASTER_FATAL_ERROR_READING_BINLOG and the specific reason of this error is
sent to a slave when it requests a dump from the master, thus leading
the I/O thread to stop.

On a slave, the I/O thread stops when receiving a packet larger than max_allowed_packet.

In both cases, however, there was no Last_IO_Error reported.

This patch adds code to report the Last_IO_Error and exact reason before stopping the
I/O thread and also reports the case the out memory pops up while
handling packets from the master.


sql/sql_repl.cc:
  The master send the Specific reasons instead of "error reading log entry" to the slave which is requesting a dump.
  if an fatal error is returned by read_log_event function.

Large pages allocator could not allocate more than 4 GB due to
incorrect size alignment.

mysys/my_largepage.c:
  Large pages allocator could not allocate more than 4 GB due to
  incorrect size alignment.

with gcc 4.3.2
      
This is the fifth patch cleaning up more GCC warnings about
variables used before initialized using the new macro
UNINIT_VAR().

 "insert into.. select * from"

When inserting into a partitioned table using 'insert into
<target> select * from <src>', read_buffer_size bytes of memory
are allocated for each partition in the target table.

This resulted in large memory consumption when the number of
partitions are high.

This patch introduces a new method which tries to estimate the
buffer size required for each partition and limits the maximum
buffer size used to maximum of 10 * read_buffer_size, 
11 * read_buffer_size in case of monotonic partition functions.

sql/ha_partition.cc:
  Introduced a method ha_partition::estimate_read_buffer_size
  to estimate buffer size required for each partition. 
  Method ha_partition::start_part_bulk_insert updated
  to update the read_buffer_size before calling bulk upload
  in storage engines.
  Added thd in ha_partition::start_part_bulk_insert method signature.
sql/ha_partition.h:
  Introduced a method ha_partition::estimate_read_buffer_size.
  Added thd in ha_partition::start_part_bulk_insert method signature.

additional backport of of bug43138 fix


mysql-test/t/myisam-system.test:
  additional backport of of bug43138 fix
sql/sql_db.cc:
  additional backport of of bug43138 fix

When parsing the service installation parameter in 
default_service_handling() make sure the value of the
optional parameter doesn't overwrite it's name.

1. Fixes BUG#44030 - Error: (1500) Couldn't read the MAX(ID) autoinc value 
                     from the index (PRIMARY)

2. Disables the innodb-autoinc test for innodb plugin temporarily.
   The testcase for this bug has different result file for InnoDB plugin.
   Should add the testcase to Innodb suite with a different result file.

Detailed revision comments:

r5243 | sunny | 2009-06-04 03:17:14 +0300 (Thu, 04 Jun 2009) | 14 lines
branches/5.1: When the InnoDB and MySQL data dictionaries go out of sync, before
the bug fix we would assert on missing autoinc columns. With this fix we allow
MySQL to open the table but set the next autoinc value for the column to the
MAX value. This effectively disables the next value generation. INSERTs will
fail with a generic AUTOINC failure. However, the user should be able to
read/dump the table, set the column values explicitly, use ALTER TABLE to
set the next autoinc value and/or sync the two data dictionaries to resume
normal operations.

Fix Bug#44030 Error: (1500) Couldn't read the MAX(ID) autoinc value from the
index (PRIMARY)

rb://118

r5252 | sunny | 2009-06-04 10:16:24 +0300 (Thu, 04 Jun 2009) | 2 lines
branches/5.1: The version of the result file checked in was broken in r5243.

r5259 | vasil | 2009-06-05 10:29:16 +0300 (Fri, 05 Jun 2009) | 7 lines
branches/5.1:

Remove the word "Error" from the printout because the mysqltest suite
interprets it as an error and thus the innodb-autoinc test fails.

Approved by:	Sunny (via IM)
r5466 | vasil | 2009-07-02 10:46:45 +0300 (Thu, 02 Jul 2009) | 6 lines
branches/5.1:

Adjust the failing innodb-autoinc test to conform to the latest behavior
of the MySQL code. The idea and the comment in innodb-autoinc.test come
from Sunny.