free() is not the same as ut_free().  ut_free() pairs with ut_malloc(),
not malloc().  free() pairs with malloc() and some other functions.

Both are minor changes:
1) Compiler error introduced in r4072: double ';' at the end.
2) Warning introduced in r3613: \mem\mem0pool.c(481) : 
warning C4098: 'mem_area_free' : 'void' function returning a value

Approved by: Sunny (IM)

Fix the failing innodb-zip test to restore the environment as it was before
the test execution because a newly added feature in the mysql-test framework
does check for this.

Fix a mysql-test failure in innodb-zip:

main.innodb-zip                          [ fail ]
        Test ended at 2009-02-02 18:13:25

CURRENT_TEST: main.innodb-zip
mysqltest: At line 160: Found line beginning with --  that didn't contain a valid mysqltest command, check your syntax or use # if you intended to write a comment

recv_read_cp_info_for_backup(), recv_scan_log_seg_for_backup():
These functions are only called by InnoDB Hot Backup.

in the function comment.  Parameters are not read from a file "srv_init".

Add ChangeLog entry for the change in r4072.

Adjust the failing patch patches/information_schema.diff.

btr_search_disabled: Rename to btr_search_enabled and change the type
to char, so that it can be directly linked to the MySQL parameters.
Note that the variable is protected by btr_search_latch and
btr_search_enabled_mutex, a new mutex introduced in this patch.

btr_search_enabled_mutex: A new mutex, to protect btr_search_enabled
together with btr_search_latch.

buf_pool_drop_hash_index(): New function, to be called from
btr_search_disable().

btr_search_disable(), btr_search_enable(): Fix bugs.  These functions
were previously unused.

btr_search_guess_on_hash(), btr_search_build_page_hash_index():
Check btr_search_enabled once more, while holding btr_search_latch.

btr_cur_search_to_nth_level(): Note that the reads of btr_search_enabled
may be dirty and explain why it should not be a problem.

innobase_adaptive_hash_index: Remove. The variable btr_search_enabled will be used directly instead.

innodb_adaptive_hash_index_update(): New function, an update callback for
innodb_adaptive_hash_index.  This will call either btr_search_disable()
or btr_search_enable() when the value is assigned.  The functions will
be called even if the value does not appear to be changed, e.g., when
setting from TRUE to TRUE or FALSE to FALSE.

rb://85 approved by Heikki Tuuri.  This addresses Issue #163.

a gcc warning about an assertion that trivially holds.
The warning was introduced in r4061, in the merge of
branches/innodb+ -r4053.

ibuf_insert(): Let an assertion fail if ibuf_use is unknown.

Implement the global variable innodb_change_buffering, with the
following values:

none - buffer nothing
inserts - buffer inserts (the default)

Approved by Ken Jacobs.

All InnoDB related tests passed on Windows, except
known failure in partition_innodb_semi_consistent.

The inadvertent change to btr0sea.c in this commit is reverted in r4060.

  ------------------------------------------------------------------------
  r4035 | vasil | 2009-01-26 09:26:25 -0600 (Mon, 26 Jan 2009) | 23 lines

  branches/5.1:

  Merge a change from MySQL:

    ------------------------------------------------------------
    revno: 2646.161.4
    committer: Tatiana A. Nurnberg <azundris@mysql.com>
    branch nick: 51-31177v2
    timestamp: Mon 2009-01-12 06:32:49 +0100
    message:
      Bug#31177: Server variables can't be set to their current values

      Bounds-checks and blocksize corrections were applied to user-input,
      but constants in the server were trusted implicitly. If these values
      did not actually meet the requirements, the user could not set change
      a variable, then set it back to the (wonky) factory default or maximum
      by explicitly specifying it (SET <var>=<value> vs SET <var>=DEFAULT).

      Now checks also apply to the server's presets. Wonky values and maxima
      get corrected at startup. Consequently all non-offsetted values the user
      sees are valid, and users can set the variable to that exact value if
      they so desire.

ut_sprintf_timestamp_without_extra_chars(), ut_get_year_month_day(),
log_reset_first_header_and_checkpoint(): These functions are only used
in InnoDB Hot Backup.

Adjust the paths in innodb_lock_wait_timeout.diff with a recent rename of
the test/result files in the MySQL tree.

introduced in r4036.
Do not call buf_block_get_space(), buf_block_get_page_no()
unless the block state is BUF_BLOCK_FILE_PAGE.

This bug was reported by Michael.

committed in r4045.

assertion failure that was accidentally introduced in r4036.
Instead of calling buf_block_get_frame(), which asserts that the
block must be buffer-fixed, access block->frame directly.  That
is safe, because changes of block->page.state are protected by
the buffer pool mutex, which we are holding.

This bug was reported by Michael.

read zip_size while still holding block_mutex.

Adjust the paths in innodb_file_per_table.diff with a recent rename of
the test/result files in the MySQL tree.

within UNIV_DEBUG. The two remaining callers in non-debug builds,
btr_search_guess_on_hash() and btr_search_validate(), were rewritten
to call buf_page_hash_get().

To implement support for a resizeable buffer pool, the function
buf_block_align() had been rewritten to perform a page hash lookup in
the buffer pool. The caller was also made responsible for holding the
buffer pool mutex.

Because the page hash lookup is expensive and it has to be done while
holding the buffer pool mutex, implement buf_block_align() by pointer
arithmetics again, and make btr_search_guess_on_hash() call it. Note
that this will have to be adjusted if the interface to the resizeable
buffer pool is actually implemented.

rb://83 approved by Heikki Tuuri, to address Issue #161.

As a deviation from the approved patch, this patch also makes
btr_search_validate() (invoked by CHECK TABLE) check that
buf_pool->page_hash is consistent with buf_block_align().

that was introduced in r4030.

  ------------------------------------------------------------------------
  r4032 | marko | 2009-01-23 15:43:51 +0200 (Fri, 23 Jan 2009) | 10 lines

  branches/5.1: Merge r4031 from branches/5.0:

  btr_search_drop_page_hash_when_freed(): Check if buf_page_get_gen()
  returns NULL.  The page may have been evicted from the buffer pool
  between buf_page_peek_if_search_hashed() and buf_page_get_gen(),
  because the buffer pool mutex will be released between these two calls.
  (Bug #42279, Issue #160)

  rb://82 approved by Heikki Tuuri
  ------------------------------------------------------------------------

This was noticed while investigating Issue #160.

This will help trim the dependencies of InnoDB Hot Backup.

recv_recovery_from_checkpoint_start(): Rename to
recv_recovery_from_checkpoint_start_func(), and remove the two first
parameters unless UNIV_LOG_ARCHIVE is defined.  Define and use
the auxiliary macros TYPE_CHECKPOINT and LIMIT_LSN in the function.

struct recv_sys_struct: Remove archive_group unless UNIV_LOG_ARCHIVE
is defined.

Do not define LOG_ARCHIVE unless UNIV_LOG_ARCHIVE is defined.

Add ChangeLog entries for the bugfixes in r4004 and r4005.

  ------------------------------------------------------------------------
  r4004 | marko | 2009-01-20 16:19:00 +0200 (Tue, 20 Jan 2009) | 12 lines

  branches/5.1: Merge r4003 from branches/5.0:

  rec_set_nth_field(): When the field already is SQL null,
  do nothing when it is being changed to SQL null. (Bug #41571)

  Normally, MySQL does not pass "do-nothing" updates to the storage engine.
  When it does and a column of an InnoDB table that is in ROW_FORMAT=COMPACT
  is being updated from NULL to NULL, the InnoDB buffer pool will be corrupted
  without this fix.

  rb://81 approved by Heikki Tuuri
  ------------------------------------------------------------------------
  r4005 | marko | 2009-01-20 16:22:36 +0200 (Tue, 20 Jan 2009) | 8 lines

  branches/5.1: lock_is_table_exclusive(): Acquire kernel_mutex before
  accessing table->locks and release kernel_mutex before returning from
  the function.  This fixes a portential race condition in the
  "commit every 10,000 rows" in ALTER TABLE, CREATE INDEX, DROP INDEX,
  and OPTIMIZE TABLE. (Bug #42152)

  rb://80 approved by Heikki Tuuri
  ------------------------------------------------------------------------

while accessing table->locks or un_member.tab_lock.locks.
This is related to Issue #158.  According to static analysis,
the added debug assertions should always hold.

lock_table_has_to_wait_in_queue(), lock_queue_iterator_reset(),
lock_queue_iterator_get_prev(), add_trx_relevant_locks_to_cache(),
fetch_data_into_cache(): Add ut_ad(mutex_own(&kernel_mutex)).

Add ChangeLog entries for the bug fixes in r3911 and r3930.

buf_LRU_block_free_non_file_page(): ut_ad(block) before dereferencing block.

buf_LRU_block_remove_hashed_page(): Forbid buf_pool_mutex_exit() while
calling buf_buddy_free().  Callers of buf_LRU_block_remove_hashed_page()
assume that the buffer pool mutex will not be released and reacquired.

Add comments and assertions that buf_LRU_block_remove_hashed_page()
will release block_mutex when it returns BUF_BLOCK_ZIP_FREE.

  ------------------------------------------------------------------------
  r3911 | sunny | 2009-01-13 14:15:24 +0200 (Tue, 13 Jan 2009) | 13 lines

  branches/5.1: Fix Bug#38187 Error 153 when creating savepoints
  InnoDB previously treated savepoints as a stack e.g.,
    SAVEPOINT a;
    SAVEPOINT b;
    SAVEPOINT c;
    SAVEPOINT b; <- This would delete b and c.

  This fix changes the behavior to:
    SAVEPOINT a;
    SAVEPOINT b;
    SAVEPOINT c;
    SAVEPOINT b; <- Does not delete savepoint c
  ------------------------------------------------------------------------
  r3930 | marko | 2009-01-14 15:51:30 +0200 (Wed, 14 Jan 2009) | 4 lines

  branches/5.1: dict_load_table(): If dict_load_indexes() fails,
  invoke dict_table_remove_from_cache() instead of dict_mem_table_free(),
  so that the data dictionary will not point to freed data.
  (Bug #42075, Issue #153, rb://76 approved by Heikki Tuuri)
  ------------------------------------------------------------------------

satisfy some conditions when UNIV_DEBUG is defined.

HASH_SEARCH(): New parameter: ASSERTION. All users will pass an appropriate
ut_ad() or nothing.

dict_table_add_to_columns(): Assert that the table being added to the data
dictionary cache is not already being pointed to by the name_hash and
id_hash tables.

HASH_SEARCH_ALL(): New macro, for use in dict_table_add_to_columns().

dict_mem_table_free(): Set ut_d(table->cached = FALSE), so that we can
check ut_ad(table->cached) when traversing the hash tables, as in
HASH_SEARCH(name_hash, dict_sys->table_hash, ...) and
HASH_SEARCH(id_hash, dict_sys->table_id_hash, ...).

dict_table_get_low(), dict_table_get_on_id_low(): Assert
ut_ad(!table || table->cached).

fil_space_get_by_id(): Check ut_ad(space->magic_n == FIL_SPACE_MAGIC_N)
in HASH_SEARCH(hash, fil_system->spaces, ...).

fil_space_get_by_name(): Check ut_ad(space->magic_n == FIL_SPACE_MAGIC_N)
in HASH_SEARCH(name_hash, fil_system->name_hash, ...).

buf_buddy_block_free(): Check that the blocks are in valid state in
HASH_SEARCH(hash, buf_pool->zip_hash, ...).

buf_page_hash_get(): Check that the blocks are in valid state in
HASH_SEARCH(hash, buf_pool->page_hash, ...).

get_share(), free_share(): Check ut_ad(share->use_count > 0) in
HASH_SEARCH(table_name_hash, innobase_open_tables, ...).

This was posted as rb://75 for tracking down errors similar to Issue #153.

row_create_table_for_mysql() already frees new_table.
Do not attempt to free it again.

that was introduced in r3879 (rb://73).