- 04 Feb, 2010 1 commit
-
-
marko authored
------------------------------------------------------------------------ r6521 | marko | 2010-01-27 10:49:01 +0200 (Wed, 27 Jan 2010) | 17 lines branches/zip: Drop temporary tables at startup. This addresses the third aspect of Bug #41609. row_mysql_drop_temp_tables(): New function, to drop all temporary tables. These can be distinguished by the least significant bit of MIX_LEN. However, we will skip ROW_FORMAT=REDUNDANT tables, because in the records for those tables, that bit may be garbage. recv_recovery_from_checkpoint_finish(): Invoke row_mysql_drop_temp_tables(). Normally, if the .frm files for the temporary tables exist at startup, MySQL will ask InnoDB to drop the temporary tables. However, if the files are deleted, for instance, by the boot scripts of the operating system, the tables would remain in the InnoDB data dictionary unless someone digs them up by innodb_table_monitor and creates .frm files for dropping the tables. rb://221 approved by Sunny Bains. ------------------------------------------------------------------------ r6525 | marko | 2010-01-28 16:23:15 +0200 (Thu, 28 Jan 2010) | 11 lines branches/zip: buf_LRU_invalidate_tablespace(): Do not unnecessarily acquire the block_mutex for every block in the LRU list. Only acquire it when holding buf_pool_mutex is not sufficient. This should speed up the function and considerably reduce traffic on the memory bus and caches. I noticed this deficiency when working on Issue #157. This deficiency popped up again in Issue #449 (Bug #35077), which this fix does not fully address. rb://78 revision 1 approved by Heikki Tuuri. ------------------------------------------------------------------------ r6526 | jyang | 2010-01-28 18:12:40 +0200 (Thu, 28 Jan 2010) | 8 lines branches/zip: Add index translation table to map mysql index number to InnoDB index structure directly. Fix Bug #47622: "the new index is added before the existing ones in MySQL, but after one in SE". rb://215, approved by Marko ------------------------------------------------------------------------ r6527 | vasil | 2010-01-29 14:39:48 +0200 (Fri, 29 Jan 2010) | 6 lines branches/zip: Extend the comment about row_mysql_handle_errors(). Suggested by: Heikki ------------------------------------------------------------------------ r6533 | calvin | 2010-01-29 23:31:59 +0200 (Fri, 29 Jan 2010) | 4 lines branches/zip: remove duplicated copyright and license info. ------------------------------------------------------------------------ r6534 | sunny | 2010-01-29 23:42:49 +0200 (Fri, 29 Jan 2010) | 15 lines branches/zip: Two changes to fix the problem: 1. First scan the joining transaction's locks and check if no other transaction is waiting for a lock held by the joining transaction. If no other transaction is waiting then no deadlock an occur and we avoid doing an exhaustive search. 2. Change the direction of the lock traversal from backward to forward. Previously we traversed backward from the lock that has to wait, the function to that fetched the previous node was very inefficient resulting in O(n^2) access to the rec lock list. Fix Bug #49047 InnoDB deadlock detection is CPU intensive with many locks on a single row. rb://218 ------------------------------------------------------------------------ r6539 | marko | 2010-02-01 11:31:12 +0200 (Mon, 01 Feb 2010) | 75 lines branches/zip: Merge revisions 6471:6538 from branches/5.1: ------------------------------------------------------------------------ r6488 | sunny | 2010-01-21 02:55:08 +0200 (Thu, 21 Jan 2010) | 2 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test into a separate test/result files. ------------------------------------------------------------------------ r6489 | sunny | 2010-01-21 02:57:50 +0200 (Thu, 21 Jan 2010) | 2 lines Changed paths: A /branches/5.1/mysql-test/innodb-autoinc-44030.result A /branches/5.1/mysql-test/innodb-autoinc-44030.test branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test into a separate test/result files. ------------------------------------------------------------------------ r6492 | sunny | 2010-01-21 09:38:35 +0200 (Thu, 21 Jan 2010) | 1 line Changed paths: M /branches/5.1/mysql-test/innodb-autoinc-44030.test branches/5.1: Add reference to bug#47621 in the comment. ------------------------------------------------------------------------ r6535 | sunny | 2010-01-30 00:08:40 +0200 (Sat, 30 Jan 2010) | 11 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Undo the change from r6424. We need to return DB_SUCCESS even if we were unable to initialize the tabe autoinc value. This is required for the open to succeed. The only condition we currently treat as a hard error is if the autoinc field instance passed in by MySQL is NULL. Previously if the table autoinc value was 0 and the next value was requested we had an assertion that would fail. Change that assertion and treat a value of 0 to mean that the autoinc system is unavailable. Generation of next value will now return failure. rb://237 ------------------------------------------------------------------------ r6536 | sunny | 2010-01-30 00:13:42 +0200 (Sat, 30 Jan 2010) | 6 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Check *first_value everytime against the column max value and set *first_value to next autoinc if it's > col max value. ie. not rely on what is passed in from MySQL. [49497] Error 1467 (ER_AUTOINC_READ_FAILED) on inserting a negative value rb://236 ------------------------------------------------------------------------ r6537 | sunny | 2010-01-30 00:35:00 +0200 (Sat, 30 Jan 2010) | 2 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Undo r6536. ------------------------------------------------------------------------ r6538 | sunny | 2010-01-30 00:43:06 +0200 (Sat, 30 Jan 2010) | 6 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Check *first_value every time against the column max value and set *first_value to next autoinc if it's > col max value. ie. not rely on what is passed in from MySQL. [49497] Error 1467 (ER_AUTOINC_READ_FAILED) on inserting a negative value rb://236 ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6540 | marko | 2010-02-01 11:35:13 +0200 (Mon, 01 Feb 2010) | 1 line branches/zip: ChangeLog: Document the merge of 6471:6538 from branches/5.1. ------------------------------------------------------------------------ r6546 | jyang | 2010-02-03 11:05:24 +0200 (Wed, 03 Feb 2010) | 9 lines branches/zip: Relax assertion on the number of index defined in InnoDB must be comparable with that of MySQL to tolerate possible dictionary inconsistency. Fix Mantis issue #455, "UNIV_DEBUG+ assert ha_innodb.cc:3152 ib_num_index >= mysql_num_index". rb://248 Approved by Marko. ------------------------------------------------------------------------ r6547 | marko | 2010-02-03 14:43:38 +0200 (Wed, 03 Feb 2010) | 14 lines branches/zip: Clean up CHECK TABLE error handling. (Issue #220) ha_innobase::change_active_index(): Clean up code formatting. ha_innobase::check(): Incorporate the code from row_check_table_for_mysql(). Report errors to the client connection instead of writing them to the error log. row_check_table_for_mysql(): Remove. row_check_index_for_mysql(): Renamed from row_scan_and_check_index(). Let the caller initialize prebuilt, and assume that the index is usable. rb://178 approved by Sunny Bains ------------------------------------------------------------------------ r6548 | marko | 2010-02-03 15:01:39 +0200 (Wed, 03 Feb 2010) | 11 lines branches/zip: buf_LRU_invalidate_tablespace(): Ensure that prev_bpage is not relocated when freeing a compressed block. This avoids the costly rescan of the LRU list. (Bug #35077, Issue #449) At most one buffer-fix will be active at a time, affecting two blocks: the buf_page_t and the compressed page frame. This should not block the memory defragmentation in buf0buddy.c too much. In fact, it may avoid unnecessary copying if also prev_bpage belongs to the tablespace that is being invalidated. rb://240 ------------------------------------------------------------------------ r6559 | marko | 2010-02-04 13:21:18 +0200 (Thu, 04 Feb 2010) | 14 lines branches/zip: Pass the file name and line number of the caller of the b-tree cursor functions to the buffer pool requests, in order to make the latch diagnostics more accurate. buf_page_optimistic_get_func(): Renamed to buf_page_optimistic_get(). btr_page_get_father_node_ptr(), btr_insert_on_non_leaf_level(), btr_pcur_open(), btr_pcur_open_with_no_init(), btr_pcur_open_on_user_rec(), btr_pcur_open_at_rnd_pos(), btr_pcur_restore_position(), btr_cur_open_at_index_side(), btr_cur_open_at_rnd_pos(): Rename the function to _func and add the parameters file, line. Define wrapper macros with __FILE__, __LINE__. btr_cur_search_to_nth_level(): Add the parameters file, line. ------------------------------------------------------------------------ r6560 | sunny | 2010-02-04 16:11:23 +0200 (Thu, 04 Feb 2010) | 7 lines branches/zip: Remove the additional check introduced in r6534 which tries to check if the joining transaction has any other transactions waiting on its locks. This optimization results in excessive deadlocks when running Sysbench with a large number of threads. The function seems to return FALSE positives. rb://250 ------------------------------------------------------------------------
-
- 21 Jan, 2010 1 commit
-
-
inaam authored
------------------------------------------------------------------------ r6449 | marko | 2010-01-13 15:38:53 -0500 (Wed, 13 Jan 2010) | 18 lines branches/zip: lock_rec_validate_page(): Only validate the record queues when the thread is not holding a space->latch. When UNIV_DEBUG is defined while UNIV_SYNC_DEBUG is not, latching order violations will still occur and deadlocks will be possible. sync_thread_levels_nonempty_gen(): Renamed from sync_thread_levels_empty_gen(). Return the violating latch or NULL instead of FALSE or TRUE, except that there will be a ut_error before the non-NULL return. sync_thread_levels_empty_gen(): A macro that negates the return value of sync_thread_levels_nonempty_gen(). sync_thread_levels_contains(): New function, based on sync_thread_levels_nonempty_gen(). This should fix Issue #441. ------------------------------------------------------------------------ r6463 | marko | 2010-01-14 08:43:37 -0500 (Thu, 14 Jan 2010) | 5 lines branches/zip: page_copy_rec_list_end(), page_copy_rec_list_start(): Update PAGE_MAX_TRX_ID before attempting to compress the page. This fixes Issue #382 (a debug assertion failure in page_zip_reorganize()) and reduces the generated redo log. There was no bug or crash in non-debug builds. ------------------------------------------------------------------------ r6467 | inaam | 2010-01-14 13:46:00 -0500 (Thu, 14 Jan 2010) | 10 lines branches/zip rb://226 log_sys->written_to_all_lsn does not accurately represent the LSN upto which write and flush has taken place. Under a race condition it can fall behind log_sys->flushed_to_disk_lsn which is accurate. Besides written_to_all_lsn is redundant as currently InnoDB supports only one log group. Approved by: Heikki ------------------------------------------------------------------------ r6472 | calvin | 2010-01-15 18:53:47 -0500 (Fri, 15 Jan 2010) | 12 lines branches/zip: Merge revisions 6425:6471 from branches/5.1 to pick up the first part fix of bug49396. ------------------------------------------------------------------------ r6471 | calvin | 2010-01-15 17:43:27 -0600 (Fri, 15 Jan 2010) | 4 lines branches/5.1: fix bug#49396: main.innodb test fails in embedded mode Change replace_result by using $MYSQLD_DATADIR. Tested in both embedded mode and normal server mode. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6473 | calvin | 2010-01-15 18:58:16 -0500 (Fri, 15 Jan 2010) | 6 lines branches/zip: fix bug#49396: innodb.innodb-index test fails in embedded mode This is 2nd part of the fix for bug#49396. The 1st part is innodb.test. Tested in both embedded mode and normal server mode. ------------------------------------------------------------------------ r6498 | marko | 2010-01-21 04:22:52 -0500 (Thu, 21 Jan 2010) | 15 lines branches/zip: buf_page_get_gen(): Obey recv_no_ibuf_operations and do not call ibuf_merge_or_delete_for_page() in crash recovery, before the redo log has been applied. This could cure some hard-to-repeat, hard-to-explain bugs related to secondary indexes. A possible recipe to repeat the bug: 1. update a secondary index leaf page on a compressed table 2. evict the page from the buffer pool while it is still dirty 3. ibuf_insert() something for the page 4. crash 5. crash recovery; ibuf merge would be done too early, before applying redo log to the sec index page or the ibuf pages ------------------------------------------------------------------------
-
- 13 Jan, 2010 1 commit
-
-
marko authored
------------------------------------------------------------------------ r6367 | marko | 2009-12-28 15:39:19 +0200 (Mon, 28 Dec 2009) | 2 lines Changed paths: M /branches/zip/dict/dict0dict.c branches/zip: dict_index_add_to_cache(): Always free the index object, also when returning DB_CORRUPTION. ------------------------------------------------------------------------ r6425 | marko | 2010-01-12 13:47:11 +0200 (Tue, 12 Jan 2010) | 45 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/handler/ha_innodb.cc M /branches/zip/handler/ha_innodb.h M /branches/zip/row/row0mysql.c branches/zip: Merge revisions 6350:6424 from branches/5.1: ------------------------------------------------------------------------ r6421 | jyang | 2010-01-12 07:59:16 +0200 (Tue, 12 Jan 2010) | 8 lines Changed paths: M /branches/5.1/row/row0mysql.c branches/5.1: Fix bug #49238: Creating/Dropping a temporary table while at 1023 transactions will cause assert. Handle possible DB_TOO_MANY_CONCURRENT_TRXS when deleting metadata in row_drop_table_for_mysql(). rb://220, approved by Marko ------------------------------------------------------------------------ r6422 | marko | 2010-01-12 11:34:27 +0200 (Tue, 12 Jan 2010) | 3 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/handler/ha_innodb.h branches/5.1: Non-functional change: Make innobase_get_int_col_max_value() a static function. It does not access any fields of class ha_innobase. ------------------------------------------------------------------------ r6424 | marko | 2010-01-12 12:22:19 +0200 (Tue, 12 Jan 2010) | 16 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/handler/ha_innodb.h branches/5.1: In innobase_initialize_autoinc(), do not attempt to read the maximum auto-increment value from the table if innodb_force_recovery is set to at least 4, so that writes are disabled. (Bug #46193) innobase_get_int_col_max_value(): Move the function definition before ha_innobase::innobase_initialize_autoinc(), because that function now calls this function. ha_innobase::innobase_initialize_autoinc(): Change the return type to void. Do not attempt to read the maximum auto-increment value from the table if innodb_force_recovery is set to at least 4. Issue ER_AUTOINC_READ_FAILED to the client when the auto-increment value cannot be read. rb://144 by Sunny, revised by Marko ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6426 | marko | 2010-01-12 15:36:14 +0200 (Tue, 12 Jan 2010) | 2 lines Changed paths: M /branches/zip/row/row0sel.c branches/zip: row_sel_sec_rec_is_for_clust_rec(): Document the return value more accurately. ------------------------------------------------------------------------ r6433 | marko | 2010-01-13 13:19:00 +0200 (Wed, 13 Jan 2010) | 2 lines Changed paths: M /branches/zip/dict/dict0crea.c M /branches/zip/dict/dict0load.c branches/zip: dict_sys_tables_get_flags(), dict_create_sys_*_tuple(): Add some const qualifiers and comments. ------------------------------------------------------------------------ r6445 | marko | 2010-01-13 17:15:29 +0200 (Wed, 13 Jan 2010) | 3 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/buf/buf0buf.c branches/zip: buf_pool_drop_hash_index(): Check block->page.state before checking block->is_hashed, because the latter may be uninitialized right after server startup. ------------------------------------------------------------------------ r6446 | marko | 2010-01-13 17:20:10 +0200 (Wed, 13 Jan 2010) | 3 lines Changed paths: M /branches/zip/include/mem0dbg.h M /branches/zip/include/mem0dbg.ic M /branches/zip/mem/mem0dbg.c M /branches/zip/sync/sync0sync.c branches/zip: Treat mem_hash_mutex specially in mutex_free(), and explicitly free mem_hash_mutex in mem_close(). This fixes the breakage of UNIV_MEM_DEBUG that was filed as Issue #434. ------------------------------------------------------------------------ r6447 | marko | 2010-01-13 17:43:44 +0200 (Wed, 13 Jan 2010) | 5 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/row/row0sel.c branches/zip: row_sel_get_clust_rec_for_mysql(): On the READ UNCOMMITTED isolation level, do not attempt to access a clustered index record that has been marked for deletion. This fixes Issue #433. Approved by Heikki over the IM. ------------------------------------------------------------------------
-
- 26 Dec, 2009 1 commit
-
-
marko authored
------------------------------------------------------------------------ r6130 | marko | 2009-11-02 11:42:56 +0200 (Mon, 02 Nov 2009) | 9 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/btr/btr0sea.c M /branches/zip/buf/buf0buf.c M /branches/zip/dict/dict0dict.c M /branches/zip/fil/fil0fil.c M /branches/zip/ibuf/ibuf0ibuf.c M /branches/zip/include/btr0sea.h M /branches/zip/include/dict0dict.h M /branches/zip/include/fil0fil.h M /branches/zip/include/ibuf0ibuf.h M /branches/zip/include/lock0lock.h M /branches/zip/include/log0log.h M /branches/zip/include/log0recv.h M /branches/zip/include/mem0mem.h M /branches/zip/include/mem0pool.h M /branches/zip/include/os0file.h M /branches/zip/include/pars0pars.h M /branches/zip/include/srv0srv.h M /branches/zip/include/thr0loc.h M /branches/zip/include/trx0i_s.h M /branches/zip/include/trx0purge.h M /branches/zip/include/trx0rseg.h M /branches/zip/include/trx0sys.h M /branches/zip/include/trx0undo.h M /branches/zip/include/usr0sess.h M /branches/zip/lock/lock0lock.c M /branches/zip/log/log0log.c M /branches/zip/log/log0recv.c M /branches/zip/mem/mem0dbg.c M /branches/zip/mem/mem0pool.c M /branches/zip/os/os0file.c M /branches/zip/os/os0sync.c M /branches/zip/os/os0thread.c M /branches/zip/pars/lexyy.c M /branches/zip/pars/pars0lex.l M /branches/zip/que/que0que.c M /branches/zip/srv/srv0srv.c M /branches/zip/srv/srv0start.c M /branches/zip/sync/sync0arr.c M /branches/zip/sync/sync0sync.c M /branches/zip/thr/thr0loc.c M /branches/zip/trx/trx0i_s.c M /branches/zip/trx/trx0purge.c M /branches/zip/trx/trx0rseg.c M /branches/zip/trx/trx0sys.c M /branches/zip/trx/trx0undo.c M /branches/zip/usr/usr0sess.c M /branches/zip/ut/ut0mem.c branches/zip: Free all resources at shutdown. Set pointers to NULL, so that Valgrind will not complain about freed data structures that are reachable via pointers. This addresses Bug #45992 and Bug #46656. This patch is mostly based on changes copied from branches/embedded-1.0, mainly c5432, c3439, c3134, c2994, c2978, but also some other code was copied. Some added cleanup code is specific to MySQL/InnoDB. rb://199 approved by Sunny Bains ------------------------------------------------------------------------ r6134 | marko | 2009-11-04 09:57:29 +0200 (Wed, 04 Nov 2009) | 5 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/handler/ha_innodb.cc branches/zip: innobase_convert_identifier(): Convert table names with explain_filename() to address Bug #32430: 'show innodb status' causes errors Invalid (old?) table or database name in logs. rb://134 approved by Sunny Bains ------------------------------------------------------------------------ r6137 | marko | 2009-11-04 15:24:28 +0200 (Wed, 04 Nov 2009) | 1 line Changed paths: M /branches/zip/dict/dict0dict.c branches/zip: dict_index_too_big_for_undo(): Correct a typo. ------------------------------------------------------------------------ r6153 | vasil | 2009-11-10 15:33:22 +0200 (Tue, 10 Nov 2009) | 145 lines Changed paths: M /branches/zip/handler/ha_innodb.cc branches/zip: Merge r6125:6152 from branches/5.1: (everything except the last white-space change was skipped as it is already in branches/zip) ------------------------------------------------------------------------ r6127 | vasil | 2009-10-30 11:18:25 +0200 (Fri, 30 Oct 2009) | 18 lines Changed paths: M /branches/5.1/Makefile.am M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Backport c6121 from branches/zip: ------------------------------------------------------------------------ r6121 | sunny | 2009-10-30 01:42:11 +0200 (Fri, 30 Oct 2009) | 7 lines Changed paths: M /branches/zip/mysql-test/innodb-autoinc.result branches/zip: This test has been problematic for sometime now. The underlying bug is that the data dictionaries get out of sync. In the AUTOINC code we try and apply salve to the symptoms. In the past MySQL made some unrelated change and the dictionaries stopped getting out of sync and this test started to fail. Now, it seems they have reverted that changed and the test is passing again. I suspect this is not he last time that this test will change. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6129 | vasil | 2009-10-30 17:14:22 +0200 (Fri, 30 Oct 2009) | 4 lines Changed paths: M /branches/5.1/Makefile.am branches/5.1: Revert a change to Makefile.am that sneaked unnoticed in c6127. ------------------------------------------------------------------------ r6136 | marko | 2009-11-04 12:28:10 +0200 (Wed, 04 Nov 2009) | 15 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/ha_prototypes.h M /branches/5.1/ut/ut0ut.c branches/5.1: Port r6134 from branches/zip: ------------------------------------------------------------------------ r6134 | marko | 2009-11-04 07:57:29 +0000 (Wed, 04 Nov 2009) | 5 lines branches/zip: innobase_convert_identifier(): Convert table names with explain_filename() to address Bug #32430: 'show innodb status' causes errors Invalid (old?) table or database name in logs. rb://134 approved by Sunny Bains ------------------------------------------------------------------------ innobase_print_identifier(): Replace with innobase_convert_name(). innobase_convert_identifier(): New function, called by innobase_convert_name(). ------------------------------------------------------------------------ r6149 | vasil | 2009-11-09 11:15:01 +0200 (Mon, 09 Nov 2009) | 5 lines Changed paths: M /branches/5.1/CMakeLists.txt branches/5.1: Followup to r5700: Adjust the changes so they are the same as in the BZR repository. ------------------------------------------------------------------------ r6150 | vasil | 2009-11-09 11:43:31 +0200 (Mon, 09 Nov 2009) | 58 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Merge a part of r2911.5.5 from MySQL: (the other part of this was merged in c5700) ------------------------------------------------------------ revno: 2911.5.5 committer: Vladislav Vaintroub <vvaintroub@mysql.com> branch nick: 5.1-innodb_plugin timestamp: Wed 2009-06-10 10:59:49 +0200 message: Backport WL#3653 to 5.1 to enable bundled innodb plugin. Remove custom DLL loader code from innodb plugin code, use symbols exported from mysqld. removed: storage/innodb_plugin/handler/handler0vars.h storage/innodb_plugin/handler/win_delay_loader.cc added: storage/mysql_storage_engine.cmake win/create_def_file.js modified: CMakeLists.txt include/m_ctype.h include/my_global.h include/my_sys.h include/mysql/plugin.h libmysqld/CMakeLists.txt mysql-test/mysql-test-run.pl mysql-test/t/plugin.test mysql-test/t/plugin_load-master.opt mysys/charset.c sql/CMakeLists.txt sql/handler.h sql/mysql_priv.h sql/mysqld.cc sql/sql_class.cc sql/sql_class.h sql/sql_list.h sql/sql_profile.h storage/Makefile.am storage/archive/CMakeLists.txt storage/blackhole/CMakeLists.txt storage/csv/CMakeLists.txt storage/example/CMakeLists.txt storage/federated/CMakeLists.txt storage/heap/CMakeLists.txt storage/innobase/CMakeLists.txt storage/innobase/handler/ha_innodb.cc storage/innodb_plugin/CMakeLists.txt storage/innodb_plugin/handler/ha_innodb.cc storage/innodb_plugin/handler/handler0alter.cc storage/innodb_plugin/handler/i_s.cc storage/innodb_plugin/plug.in storage/myisam/CMakeLists.txt storage/myisammrg/CMakeLists.txt win/Makefile.am win/configure.js ------------------------------------------------------------------------ r6152 | vasil | 2009-11-10 15:30:20 +0200 (Tue, 10 Nov 2009) | 4 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: White space fixup. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6157 | jyang | 2009-11-11 14:27:09 +0200 (Wed, 11 Nov 2009) | 10 lines Changed paths: M /branches/zip/handler/ha_innodb.cc A /branches/zip/mysql-test/innodb_bug47167.result A /branches/zip/mysql-test/innodb_bug47167.test M /branches/zip/mysql-test/innodb_file_format.result branches/zip: Fix an issue that a local variable defined in innodb_file_format_check_validate() is being referenced across function in innodb_file_format_check_update(). In addition, fix "set global innodb_file_format_check = DEFAULT" call. Bug #47167: "set global innodb_file_format_check" cannot set value by User-Defined Variable." rb://169 approved by Sunny Bains and Marko. ------------------------------------------------------------------------ r6159 | vasil | 2009-11-11 15:13:01 +0200 (Wed, 11 Nov 2009) | 37 lines Changed paths: M /branches/zip/handler/ha_innodb.cc M /branches/zip/handler/ha_innodb.h branches/zip: Merge a change from MySQL: (this has been reviewed by Calvin and Marko, and Calvin says Luis has incorporated Marko's suggestions) ------------------------------------------------------------ revno: 3092.5.1 committer: Luis Soares <luis.soares@sun.com> branch nick: mysql-5.1-bugteam timestamp: Thu 2009-09-24 15:52:52 +0100 message: BUG#42829: binlogging enabled for all schemas regardless of binlog-db-db / binlog-ignore-db InnoDB will return an error if statement based replication is used along with transaction isolation level READ-COMMITTED (or weaker), even if the statement in question is filtered out according to the binlog-do-db rules set. In this case, an error should not be printed. This patch addresses this issue by extending the existing check in external_lock to take into account the filter rules before deciding to print an error. Furthermore, it also changes decide_logging_format to take into consideration whether the statement is filtered out from binlog before decision is made. added: mysql-test/suite/binlog/r/binlog_stm_do_db.result mysql-test/suite/binlog/t/binlog_stm_do_db-master.opt mysql-test/suite/binlog/t/binlog_stm_do_db.test modified: sql/sql_base.cc sql/sql_class.cc storage/innobase/handler/ha_innodb.cc storage/innobase/handler/ha_innodb.h storage/innodb_plugin/handler/ha_innodb.cc storage/innodb_plugin/handler/ha_innodb.h ------------------------------------------------------------------------ r6160 | vasil | 2009-11-11 15:33:49 +0200 (Wed, 11 Nov 2009) | 72 lines Changed paths: M /branches/zip/include/os0file.h M /branches/zip/os/os0file.c branches/zip: Merge r6152:6159 from branches/5.1: (r6158 was skipped as an equivallent change has already been merged from MySQL) ------------------------------------------------------------------------ r6154 | calvin | 2009-11-11 02:51:17 +0200 (Wed, 11 Nov 2009) | 17 lines Changed paths: M /branches/5.1/include/os0file.h M /branches/5.1/os/os0file.c branches/5.1: fix bug#3139: Mysql crashes: 'windows error 995' after several selects on a large DB During stress environment, Windows AIO may fail with error code ERROR_OPERATION_ABORTED. InnoDB does not handle the error, rather crashes. The cause of the error is unknown, but likely due to faulty hardware or driver. This patch introduces a new error code OS_FILE_OPERATION_ABORTED, which maps to Windows ERROR_OPERATION_ABORTED (995). When the error is detected during AIO, the InnoDB will issue a synchronous retry (read/write). This patch has been extensively tested by MySQL support. Approved by: Marko rb://196 ------------------------------------------------------------------------ r6158 | vasil | 2009-11-11 14:52:14 +0200 (Wed, 11 Nov 2009) | 37 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/handler/ha_innodb.h branches/5.1: Merge a change from MySQL: (this has been reviewed by Calvin and Marko, and Calvin says Luis has incorporated Marko's suggestions) ------------------------------------------------------------ revno: 3092.5.1 committer: Luis Soares <luis.soares@sun.com> branch nick: mysql-5.1-bugteam timestamp: Thu 2009-09-24 15:52:52 +0100 message: BUG#42829: binlogging enabled for all schemas regardless of binlog-db-db / binlog-ignore-db InnoDB will return an error if statement based replication is used along with transaction isolation level READ-COMMITTED (or weaker), even if the statement in question is filtered out according to the binlog-do-db rules set. In this case, an error should not be printed. This patch addresses this issue by extending the existing check in external_lock to take into account the filter rules before deciding to print an error. Furthermore, it also changes decide_logging_format to take into consideration whether the statement is filtered out from binlog before decision is made. added: mysql-test/suite/binlog/r/binlog_stm_do_db.result mysql-test/suite/binlog/t/binlog_stm_do_db-master.opt mysql-test/suite/binlog/t/binlog_stm_do_db.test modified: sql/sql_base.cc sql/sql_class.cc storage/innobase/handler/ha_innodb.cc storage/innobase/handler/ha_innodb.h storage/innodb_plugin/handler/ha_innodb.cc storage/innodb_plugin/handler/ha_innodb.h ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6161 | vasil | 2009-11-11 15:36:16 +0200 (Wed, 11 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip: Add changelog entry for r6160. ------------------------------------------------------------------------ r6162 | vasil | 2009-11-11 16:00:12 +0200 (Wed, 11 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip: Add ChangeLog for r6157. ------------------------------------------------------------------------ r6163 | calvin | 2009-11-11 17:53:20 +0200 (Wed, 11 Nov 2009) | 8 lines Changed paths: M /branches/zip/handler/ha_innodb.cc M /branches/zip/handler/ha_innodb.h branches/zip: Exclude thd_binlog_filter_ok() when building with older version of MySQL. thd_binlog_filter_ok() is introduced in MySQL 5.1.41. But the plugin can be built with MySQL prior to 5.1.41. Approved by Heikki (on IM). ------------------------------------------------------------------------ r6169 | calvin | 2009-11-12 14:40:43 +0200 (Thu, 12 Nov 2009) | 6 lines Changed paths: A /branches/zip/mysql-test/innodb_bug46676.result A /branches/zip/mysql-test/innodb_bug46676.test branches/zip: add test case for bug#46676 This crash is reproducible with InnoDB plugin 1.0.4 + MySQL 5.1.37. But no longer reproducible after MySQL 5.1.38 (with plugin 1.0.5). Add test case to catch future regression. ------------------------------------------------------------------------ r6170 | marko | 2009-11-12 15:49:08 +0200 (Thu, 12 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/handler/ha_innodb.cc M /branches/zip/include/db0err.h M /branches/zip/row/row0merge.c M /branches/zip/row/row0mysql.c branches/zip: Allow CREATE INDEX to be interrupted. (Issue #354) rb://183 approved by Heikki Tuuri ------------------------------------------------------------------------ r6175 | vasil | 2009-11-16 20:07:39 +0200 (Mon, 16 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip: Wrap line at 78th char in the ChangeLog ------------------------------------------------------------------------ r6177 | calvin | 2009-11-16 20:20:38 +0200 (Mon, 16 Nov 2009) | 2 lines Changed paths: M /branches/zip/ChangeLog branches/zip: add an entry to ChangeLog for r6065 ------------------------------------------------------------------------ r6179 | marko | 2009-11-17 10:19:34 +0200 (Tue, 17 Nov 2009) | 2 lines Changed paths: M /branches/zip/handler/ha_innodb.cc branches/zip: ha_innobase::change_active_index(): When the history is missing, report it to the client, not to the error log. ------------------------------------------------------------------------ r6181 | vasil | 2009-11-17 12:21:41 +0200 (Tue, 17 Nov 2009) | 33 lines Changed paths: M /branches/zip/mysql-test/innodb-index.test branches/zip: At the end of innodb-index.test: restore the environment as it was before the test was started to silence this warning: MTR's internal check of the test case 'main.innodb-index' failed. This means that the test case does not preserve the state that existed before the test case was executed. Most likely the test case did not do a proper clean-up. This is the diff of the states of the servers before and after the test case was executed: mysqltest: Logging to '/tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.log'. mysqltest: Results saved in '/tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result'. mysqltest: Connecting to server localhost:13000 (socket /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/mysqld.1.sock) as 'root', connection 'default', attempt 0 ... mysqltest: ... Connected. mysqltest: Start processing test commands from './include/check-testcase.test' ... mysqltest: ... Done processing test commands. --- /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result 2009-11-17 13:10:40.000000000 +0300 +++ /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.reject 2009-11-17 13:10:54.000000000 +0300 @@ -84,7 +84,7 @@ INNODB_DOUBLEWRITE ON INNODB_FAST_SHUTDOWN 1 INNODB_FILE_FORMAT Antelope -INNODB_FILE_FORMAT_CHECK Antelope +INNODB_FILE_FORMAT_CHECK Barracuda INNODB_FILE_PER_TABLE OFF INNODB_FLUSH_LOG_AT_TRX_COMMIT 1 INNODB_FLUSH_METHOD mysqltest: Result content mismatch not ok ------------------------------------------------------------------------ r6182 | marko | 2009-11-17 13:49:15 +0200 (Tue, 17 Nov 2009) | 1 line Changed paths: M /branches/zip/mysql-test/innodb-consistent-master.opt M /branches/zip/mysql-test/innodb-consistent.result M /branches/zip/mysql-test/innodb-consistent.test M /branches/zip/mysql-test/innodb-use-sys-malloc-master.opt M /branches/zip/mysql-test/innodb-use-sys-malloc.result M /branches/zip/mysql-test/innodb-use-sys-malloc.test M /branches/zip/mysql-test/innodb_bug21704.result M /branches/zip/mysql-test/innodb_bug21704.test M /branches/zip/mysql-test/innodb_bug40360.test M /branches/zip/mysql-test/innodb_bug40565.result M /branches/zip/mysql-test/innodb_bug40565.test M /branches/zip/mysql-test/innodb_bug41904.result M /branches/zip/mysql-test/innodb_bug41904.test M /branches/zip/mysql-test/innodb_bug42101-nonzero-master.opt M /branches/zip/mysql-test/innodb_bug42101-nonzero.result M /branches/zip/mysql-test/innodb_bug42101-nonzero.test M /branches/zip/mysql-test/innodb_bug42101.result M /branches/zip/mysql-test/innodb_bug42101.test M /branches/zip/mysql-test/innodb_bug44032.result M /branches/zip/mysql-test/innodb_bug44032.test M /branches/zip/mysql-test/innodb_bug44369.result M /branches/zip/mysql-test/innodb_bug44369.test M /branches/zip/mysql-test/innodb_bug44571.result M /branches/zip/mysql-test/innodb_bug44571.test M /branches/zip/mysql-test/innodb_bug45357.test M /branches/zip/mysql-test/innodb_bug46000.result M /branches/zip/mysql-test/innodb_bug46000.test M /branches/zip/mysql-test/innodb_bug46676.result M /branches/zip/mysql-test/innodb_bug46676.test M /branches/zip/mysql-test/innodb_bug47167.result M /branches/zip/mysql-test/innodb_bug47167.test M /branches/zip/mysql-test/innodb_bug47777.result M /branches/zip/mysql-test/innodb_bug47777.test M /branches/zip/mysql-test/innodb_file_format.result M /branches/zip/mysql-test/innodb_file_format.test branches/zip: Set svn:eol-style on mysql-test files. ------------------------------------------------------------------------ r6183 | marko | 2009-11-17 13:51:16 +0200 (Tue, 17 Nov 2009) | 1 line Changed paths: M /branches/zip/mysql-test/innodb-consistent-master.opt M /branches/zip/mysql-test/innodb-master.opt M /branches/zip/mysql-test/innodb-semi-consistent-master.opt M /branches/zip/mysql-test/innodb-use-sys-malloc-master.opt M /branches/zip/mysql-test/innodb_bug42101-nonzero-master.opt branches/zip: Prepend loose_ to plugin-only mysql-test options. ------------------------------------------------------------------------ r6184 | marko | 2009-11-17 13:52:01 +0200 (Tue, 17 Nov 2009) | 1 line Changed paths: M /branches/zip/mysql-test/innodb-index.result M /branches/zip/mysql-test/innodb-index.test branches/zip: innodb-index.test: Restore innodb_file_format_check. ------------------------------------------------------------------------ r6185 | marko | 2009-11-17 16:44:20 +0200 (Tue, 17 Nov 2009) | 16 lines Changed paths: M /branches/zip/handler/ha_innodb.cc M /branches/zip/mysql-test/innodb.result M /branches/zip/mysql-test/innodb.test M /branches/zip/mysql-test/innodb_bug44369.result M /branches/zip/mysql-test/innodb_bug44369.test D /branches/zip/mysql-test/patches/innodb-index.diff M /branches/zip/row/row0mysql.c branches/zip: Report duplicate table names to the client connection, not to the error log. This change will allow innodb-index.test to be re-enabled. It was previously disabled, because mysql-test-run does not like output in the error log. row_create_table_for_mysql(): Do not output anything to the error log when reporting DB_DUPLICATE_KEY. Let the caller report the error. Add a TODO comment that the dict_table_t object is apparently not freed when an error occurs. create_table_def(): Convert InnoDB table names to the character set of the client connection for reporting. Use my_error(ER_WRONG_COLUMN_NAME) for reporting reserved column names. Report my_error(ER_TABLE_EXISTS_ERROR) when row_create_table_for_mysql() returns DB_DUPLICATE_KEY. rb://206 ------------------------------------------------------------------------ r6186 | vasil | 2009-11-17 16:48:14 +0200 (Tue, 17 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip: Add ChangeLog entry for r6185. ------------------------------------------------------------------------ r6189 | marko | 2009-11-18 11:36:18 +0200 (Wed, 18 Nov 2009) | 5 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/handler/handler0alter.cc branches/zip: ha_innobase::add_index(): When creating the primary key and the table is being locked by another transaction, do not attempt to drop the table. (Bug #48782) Approved by Sunny Bains over IM ------------------------------------------------------------------------ r6194 | vasil | 2009-11-19 09:24:45 +0200 (Thu, 19 Nov 2009) | 5 lines Changed paths: M /branches/zip/include/univ.i branches/zip: Increment version number from 1.0.5 to 1.0.6 since 1.0.5 was just released by MySQL and we will soon release 1.0.6. ------------------------------------------------------------------------ r6197 | calvin | 2009-11-19 09:32:55 +0200 (Thu, 19 Nov 2009) | 6 lines Changed paths: M /branches/zip/CMakeLists.txt branches/zip: merge the fix of bug#48317 (CMake file) Due to MySQL changes to the CMake, it is no longer able to build InnoDB plugin as a static library on Windows. The fix is proposed by Vlad of MySQL. ------------------------------------------------------------------------ r6198 | vasil | 2009-11-19 09:44:31 +0200 (Thu, 19 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip: Add ChangeLog entry for r6197. ------------------------------------------------------------------------ r6199 | vasil | 2009-11-19 12:10:12 +0200 (Thu, 19 Nov 2009) | 31 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/btr/btr0btr.c M /branches/zip/data/data0type.c branches/zip: Merge r6159:6198 from branches/5.1: ------------------------------------------------------------------------ r6187 | jyang | 2009-11-18 05:27:30 +0200 (Wed, 18 Nov 2009) | 9 lines Changed paths: M /branches/5.1/btr/btr0btr.c branches/5.1: Fix bug #48469 "when innodb tablespace is configured too small, crash and corruption!". Function btr_create() did not check the return status of fseg_create(), and continue the index creation even there is no sufficient space. rb://205 Approved by Marko ------------------------------------------------------------------------ r6188 | jyang | 2009-11-18 07:14:23 +0200 (Wed, 18 Nov 2009) | 8 lines Changed paths: M /branches/5.1/data/data0type.c branches/5.1: Fix bug #48526 "Data type for float and double is incorrectly reported in InnoDB table monitor". Certain datatypes are not printed correctly in dtype_print(). rb://204 Approved by Marko. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6201 | marko | 2009-11-19 14:09:11 +0200 (Thu, 19 Nov 2009) | 2 lines Changed paths: M /branches/zip/handler/handler0alter.cc branches/zip: ha_innobase::add_index(): Clarify the comment on orphaned tables when creating a primary key. ------------------------------------------------------------------------ r6202 | jyang | 2009-11-19 15:01:00 +0200 (Thu, 19 Nov 2009) | 8 lines Changed paths: M /branches/zip/btr/btr0btr.c branches/zip: Function fseg_free() is no longer defined in branches/zip. To port fix for bug #48469 to zip, we can use btr_free_root() which frees the page, and also does not require mini-transaction. Approved by Marko. ------------------------------------------------------------------------ r6207 | vasil | 2009-11-20 10:19:14 +0200 (Fri, 20 Nov 2009) | 54 lines Changed paths: M /branches/zip/handler/ha_innodb.cc branches/zip: Merge r6198:6206 from branches/5.1: (r6203 was skipped as it is already in branches/zip) ------------------------------------------------------------------------ r6200 | vasil | 2009-11-19 12:14:23 +0200 (Thu, 19 Nov 2009) | 4 lines Changed paths: M /branches/5.1/btr/btr0btr.c branches/5.1: White space fixup - indent under the opening ( ------------------------------------------------------------------------ r6203 | jyang | 2009-11-19 15:12:22 +0200 (Thu, 19 Nov 2009) | 8 lines Changed paths: M /branches/5.1/btr/btr0btr.c branches/5.1: Use btr_free_root() instead of fseg_free() for the fix of bug #48469, because fseg_free() is not defined in the zip branch. And we could save one mini-trasaction started by fseg_free(). Approved by Marko. ------------------------------------------------------------------------ r6205 | jyang | 2009-11-20 07:55:48 +0200 (Fri, 20 Nov 2009) | 11 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Add a special case to handle the Duplicated Key error and return DB_ERROR instead. This is to avoid a possible SIGSEGV by mysql error handling re-entering the storage layer for dup key info without proper table handle. This is to prevent a server crash when error situation in bug #45961 "DDL on partitioned innodb tables leaves data dictionary in an inconsistent state" happens. rb://157 approved by Sunny Bains. ------------------------------------------------------------------------ r6206 | jyang | 2009-11-20 09:38:43 +0200 (Fri, 20 Nov 2009) | 5 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Fix a minor code formating issue for the parenthesis iplacement of the if condition in rename_table(). ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6208 | vasil | 2009-11-20 10:49:24 +0200 (Fri, 20 Nov 2009) | 4 lines Changed paths: M /branches/zip/ChangeLog branches/zip: Add ChangeLog entry for c6207. ------------------------------------------------------------------------ r6210 | vasil | 2009-11-20 23:39:48 +0200 (Fri, 20 Nov 2009) | 3 lines Changed paths: M /branches/zip/trx/trx0i_s.c branches/zip: Whitespace fixup. ------------------------------------------------------------------------ r6248 | marko | 2009-11-30 12:19:50 +0200 (Mon, 30 Nov 2009) | 1 line Changed paths: M /branches/zip/ChangeLog branches/zip: ChangeLog: Document r4922 that was forgotten. ------------------------------------------------------------------------ r6252 | marko | 2009-11-30 12:50:11 +0200 (Mon, 30 Nov 2009) | 23 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/dict/dict0boot.c M /branches/zip/dict/dict0crea.c M /branches/zip/dict/dict0load.c M /branches/zip/dict/dict0mem.c M /branches/zip/fil/fil0fil.c M /branches/zip/handler/ha_innodb.cc M /branches/zip/include/dict0mem.h M /branches/zip/row/row0mysql.c branches/zip: Suppress errors about non-found temporary tables. Write the is_temp flag to SYS_TABLES.MIX_LEN. dict_table_t::flags: Add a flag for is_temporary, DICT_TF2_TEMPORARY. Unlike other flags, this will not be written to the tablespace flags or SYS_TABLES.TYPE, but only to SYS_TABLES.MIX_LEN. dict_build_table_def_step(): Only pass DICT_TF_BITS to tablespaces. dict_check_tablespaces_and_store_max_id(), dict_load_table(): Suppress errors about temporary tables not being found. dict_create_sys_tables_tuple(): Write the DICT_TF2_TEMPORARY flag to SYS_TABLES.MIX_LEN. fil_space_create(), fil_create_new_single_table_tablespace(): Add assertions about space->flags. row_drop_table_for_mysql(): Do not complain about non-found temporary tables. rb://160 approved by Heikki Tuuri. This addresses the second part of Bug #41609 Crash recovery does not work for InnoDB temporary tables. ------------------------------------------------------------------------ r6263 | vasil | 2009-12-01 14:49:05 +0200 (Tue, 01 Dec 2009) | 4 lines Changed paths: M /branches/zip/include/univ.i branches/zip: Increment version number from 1.0.6 to 1.0.7 1.0.6 has been released ------------------------------------------------------------------------ r6264 | vasil | 2009-12-01 16:19:44 +0200 (Tue, 01 Dec 2009) | 1 line Changed paths: M /branches/zip/ChangeLog branches/zip: Add ChangeLog entry for the release of 1.0.6. ------------------------------------------------------------------------ r6269 | marko | 2009-12-02 11:35:22 +0200 (Wed, 02 Dec 2009) | 2 lines Changed paths: M /branches/zip/srv/srv0start.c branches/zip: innobase_start_or_create_for_mysql(): UNIV_IBUF_DEBUG should not break crash recovery, but UNIV_IBUF_COUNT_DEBUG will. ------------------------------------------------------------------------ r6270 | marko | 2009-12-02 11:36:47 +0200 (Wed, 02 Dec 2009) | 1 line Changed paths: M /branches/zip/srv/srv0start.c branches/zip: innobase_start_or_create_for_mysql(): Log the zlib version. ------------------------------------------------------------------------ r6271 | marko | 2009-12-02 11:43:49 +0200 (Wed, 02 Dec 2009) | 2 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/Makefile.am M /branches/zip/include/univ.i M /branches/zip/plug.in branches/zip: ChangeLog: Document that since r6270, the zlib version number will be displayed at start-up. ------------------------------------------------------------------------ r6272 | marko | 2009-12-02 11:46:05 +0200 (Wed, 02 Dec 2009) | 1 line Changed paths: M /branches/zip/Makefile.am M /branches/zip/include/univ.i M /branches/zip/plug.in branches/zip: Revert changes that were accidentally committed in r6271. ------------------------------------------------------------------------ r6274 | marko | 2009-12-03 14:47:12 +0200 (Thu, 03 Dec 2009) | 6 lines Changed paths: M /branches/zip/dict/dict0dict.c branches/zip: dict_table_check_for_dup_indexes(): Assert that the data dictionary mutex is being held while table->indexes is accessed. This is already the case. Currently, only dict_table_get_next_index() and dict_table_get_first_index() are being invoked without holding dict_sys->mutex. ------------------------------------------------------------------------ r6275 | pekka | 2009-12-03 18:32:47 +0200 (Thu, 03 Dec 2009) | 10 lines Changed paths: M /branches/zip/include/log0recv.h M /branches/zip/include/trx0sys.h M /branches/zip/log/log0recv.c M /branches/zip/trx/trx0sys.c branches/zip: Minor changes which allow build with UNIV_HOTBACKUP defined to succeed: include/trx0sys.h: Allow Hot Backup build to see some TRX_SYS_DOUBLEWRITE_... macros. trx/trx0sys.c: Exclude trx_sys_close() function from Hot Backup build. log/log0recv.[ch]: Exclude recv_sys_var_init() function from Hot Backup build. This change should not affect !UNIV_HOTBACKUP build. ------------------------------------------------------------------------ r6277 | marko | 2009-12-08 11:13:36 +0200 (Tue, 08 Dec 2009) | 1 line Changed paths: M /branches/zip/fsp/fsp0fsp.c branches/zip: fsp0fsp.c: Add some missing in/out and const qualifiers. ------------------------------------------------------------------------ r6285 | marko | 2009-12-09 09:24:50 +0200 (Wed, 09 Dec 2009) | 13 lines Changed paths: M /branches/zip/row/row0sel.c branches/zip: row_sel_fetch_columns(): Remove redundant code that was accidentally added in r1591, which introduced dfield_t::ext in order to make the merge sort of fast index creation support externally stored columns, Initially, I tried to allocate the bit for dfield_t::ext from dfield_t::len by making the length 31 bits and mapping UNIV_SQL_NULL to something that would fit in it. Then I decided that it would be too risky. The redundant check was part of the mapping. The condition may have been dfield_is_null() initially. This redundant code was noticed by Sergey Petrunya on the MySQL internals list. ------------------------------------------------------------------------ r6288 | marko | 2009-12-09 09:51:00 +0200 (Wed, 09 Dec 2009) | 15 lines Changed paths: M /branches/zip/row/row0upd.c branches/zip: row_upd_copy_columns(): Remove redundant code that was accidentally added in r1591, which introduced dfield_t::ext in order to make the merge sort of fast index creation support externally stored columns. Initially, I tried to allocate the bit for dfield_t::ext from dfield_t::len by making the length 31 bits and mapping UNIV_SQL_NULL to something that would fit in it. Then I decided that it would be too risky. The redundant check was part of the mapping. The condition may have been dfield_is_null() initially. This is similar to the redundant code in row_sel_fetch_columns() that was noticed by Sergey Petrunya on the MySQL internals list and removed in r6285. As far as I can tell, there are no redundant UNIV_SQL_NULL assignments remaining after this change. ------------------------------------------------------------------------ r6305 | marko | 2009-12-14 13:03:57 +0200 (Mon, 14 Dec 2009) | 2 lines Changed paths: M /branches/zip/row/row0umod.c branches/zip: row_undo_mod_del_unmark_sec_and_undo_update(): Add a missing const qualifier. ------------------------------------------------------------------------ r6309 | marko | 2009-12-15 14:05:50 +0200 (Tue, 15 Dec 2009) | 3 lines Changed paths: M /branches/zip/lock/lock0lock.c branches/zip: lock_rec_insert_check_and_lock(): Avoid casting away constness. Use page_rec_get_next_const() instead. This silences a gcc 4.2.4 warning. Reported by Sunny Bains. ------------------------------------------------------------------------ r6312 | marko | 2009-12-16 10:10:36 +0200 (Wed, 16 Dec 2009) | 6 lines Changed paths: M /branches/zip/fil/fil0fil.c branches/zip: fil_close(): Add #ifndef UNIV_HOTBACKUP around a debug assertion on mutex.magic_n. InnoDB Hot Backup is a single-threaded program and does not contain mutexes. This change allows InnoDB Hot Backup to be compiled with UNIV_DEBUG. Suggested by Michael Izioumtchenko. ------------------------------------------------------------------------ r6321 | marko | 2009-12-16 16:16:33 +0200 (Wed, 16 Dec 2009) | 4 lines Changed paths: M /branches/zip/row/row0merge.c branches/zip: row_merge_drop_temp_indexes(): Revert a hack to transaction isolation level that was made unnecessary by r5826 (Issue #337). When this function is called, any active data dictionary transaction should have been rolled back. ------------------------------------------------------------------------ r6345 | marko | 2009-12-21 10:46:14 +0200 (Mon, 21 Dec 2009) | 7 lines Changed paths: M /branches/zip/log/log0recv.c branches/zip: recv_scan_log_recs(): Non-functional change: Replace a debug assertion ut_ad(len > 0) with ut_ad(len >= OS_FILE_LOG_BLOCK_SIZE). This change is only for readability, for Issue #428. Another assertion on len being an integer multiple of OS_FILE_LOG_BLOCK_SIZE already ensured together with the old ut_ad(len > 0) that actually len must be at least OS_FILE_LOG_BLOCK_SIZE. ------------------------------------------------------------------------ r6346 | marko | 2009-12-21 12:03:25 +0200 (Mon, 21 Dec 2009) | 2 lines Changed paths: M /branches/zip/log/log0recv.c branches/zip: recv_recovery_from_checkpoint_finish(): Revert a change that was accidentally committed in r6345. ------------------------------------------------------------------------ r6348 | marko | 2009-12-22 11:04:34 +0200 (Tue, 22 Dec 2009) | 37 lines Changed paths: M /branches/zip/handler/ha_innodb.cc M /branches/zip/include/ha_prototypes.h M /branches/zip/include/trx0trx.h M /branches/zip/lock/lock0lock.c M /branches/zip/trx/trx0i_s.c M /branches/zip/trx/trx0trx.c branches/zip: Merge a change from MySQL: ------------------------------------------------------------ revno: 3236 committer: Satya B <satya.bn@sun.com> branch nick: mysql-5.1-bugteam timestamp: Tue 2009-12-01 17:48:57 +0530 message: merge to mysql-5.1-bugteam ------------------------------------------------------------ revno: 3234.1.1 committer: Gleb Shchepa <gshchepa@mysql.com> branch nick: mysql-5.1-bugteam timestamp: Tue 2009-12-01 14:38:40 +0400 message: Bug #38883 (reopened): thd_security_context is not thread safe, crashes? manual merge 5.0-->5.1, updating InnoDB plugin. ------------------------------------------------------------ revno: 1810.3968.13 committer: Gleb Shchepa <gshchepa@mysql.com> branch nick: mysql-5.0-bugteam timestamp: Tue 2009-12-01 14:24:44 +0400 message: Bug #38883 (reopened): thd_security_context is not thread safe, crashes? The bug 38816 changed the lock that protects THD::query from LOCK_thread_count to LOCK_thd_data, but didn't update the associated InnoDB functions. 1. The innobase_mysql_prepare_print_arbitrary_thd and the innobase_mysql_end_print_arbitrary_thd InnoDB functions have been removed, since now we have a per-thread mutex: now we don't need to wrap several inter-thread access tries to THD::query with a single global LOCK_thread_count lock, so we can simplify the code. 2. The innobase_mysql_print_thd function has been modified to lock LOCK_thd_data in direct way. ------------------------------------------------------------------------ r6351 | marko | 2009-12-22 11:11:18 +0200 (Tue, 22 Dec 2009) | 1 line Changed paths: M /branches/zip/handler/ha_innodb.cc branches/zip: Remove an obsolete declaration of LOCK_thread_count. ------------------------------------------------------------------------ r6352 | marko | 2009-12-22 12:33:01 +0200 (Tue, 22 Dec 2009) | 104 lines Changed paths: M /branches/zip/handler/ha_innodb.cc M /branches/zip/include/lock0lock.h M /branches/zip/include/srv0srv.h M /branches/zip/lock/lock0lock.c M /branches/zip/log/log0log.c M /branches/zip/mysql-test/innodb-autoinc.result M /branches/zip/mysql-test/innodb-autoinc.test M /branches/zip/row/row0sel.c M /branches/zip/srv/srv0srv.c M /branches/zip/srv/srv0start.c branches/zip: Merge revisions 6206:6350 from branches/5.1, except r6347, r6349, r6350 which were committed separately to both branches, and r6310, which was backported from zip to 5.1. ------------------------------------------------------------------------ r6206 | jyang | 2009-11-20 09:38:43 +0200 (Fri, 20 Nov 2009) | 3 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Non-functional change, fix formatting. ------------------------------------------------------------------------ r6230 | sunny | 2009-11-24 23:52:43 +0200 (Tue, 24 Nov 2009) | 3 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result branches/5.1: Fix autoinc failing test results. (this should be skipped when merging 5.1 into zip) ------------------------------------------------------------------------ r6231 | sunny | 2009-11-25 10:26:27 +0200 (Wed, 25 Nov 2009) | 7 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test M /branches/5.1/row/row0sel.c branches/5.1: Fix BUG#49032 - auto_increment field does not initialize to last value in InnoDB Storage Engine. We use the appropriate function to read the column value for non-integer autoinc column types, namely float and double. rb://208. Approved by Marko. ------------------------------------------------------------------------ r6232 | sunny | 2009-11-25 10:27:39 +0200 (Wed, 25 Nov 2009) | 2 lines Changed paths: M /branches/5.1/row/row0sel.c branches/5.1: This is an interim fix, fix white space errors. ------------------------------------------------------------------------ r6233 | sunny | 2009-11-25 10:28:35 +0200 (Wed, 25 Nov 2009) | 2 lines Changed paths: M /branches/5.1/include/mach0data.h M /branches/5.1/include/mach0data.ic M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test M /branches/5.1/row/row0sel.c branches/5.1: This is an interim fix, fix tests and make read float/double arg const. ------------------------------------------------------------------------ r6234 | sunny | 2009-11-25 10:29:03 +0200 (Wed, 25 Nov 2009) | 2 lines Changed paths: M /branches/5.1/row/row0sel.c branches/5.1: This is an interim fix, fix whitepsace issues. ------------------------------------------------------------------------ r6235 | sunny | 2009-11-26 01:14:42 +0200 (Thu, 26 Nov 2009) | 9 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Fix Bug#47720 - REPLACE INTO Autoincrement column with negative values. This bug is similiar to the negative autoinc filter patch from earlier, with the additional handling of filtering out the negative column values set explicitly by the user. rb://184 Approved by Heikki. ------------------------------------------------------------------------ r6242 | vasil | 2009-11-27 22:07:12 +0200 (Fri, 27 Nov 2009) | 4 lines Changed paths: M /branches/5.1/export.sh branches/5.1: Minor changes to support plugin snapshots. ------------------------------------------------------------------------ r6306 | calvin | 2009-12-14 15:12:46 +0200 (Mon, 14 Dec 2009) | 5 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: fix bug#49267: innodb-autoinc.test fails on windows because of different case mode There is no change to the InnoDB code, only to fix test case by changing "T1" to "t1". ------------------------------------------------------------------------ r6324 | jyang | 2009-12-17 06:54:24 +0200 (Thu, 17 Dec 2009) | 8 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/lock0lock.h M /branches/5.1/include/srv0srv.h M /branches/5.1/lock/lock0lock.c M /branches/5.1/log/log0log.c M /branches/5.1/srv/srv0srv.c M /branches/5.1/srv/srv0start.c branches/5.1: Fix bug #47814 - Diagnostics are frequently not printed after a long lock wait in InnoDB. Separate out the lock wait timeout check thread from monitor information printing thread. rb://200 Approved by Marko. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6364 | marko | 2009-12-26 21:06:31 +0200 (Sat, 26 Dec 2009) | 4 lines Changed paths: M /branches/zip/ibuf/ibuf0ibuf.c branches/zip: ibuf_bitmap_get_map_page(): Define a wrapper macro that passes __FILE__, __LINE__ of the caller to buf_page_get_gen(). This will ease the diagnosis of the likes of Issue #135. ------------------------------------------------------------------------
-
- 17 Dec, 2009 2 commits
-
-
rb://210inaam authored
Introduce a new mutex to protect flush_list. Redesign mtr_commit() in a way that log_sys mutex is not held while all mtr_memos are popped and is released just after the modified blocks are inserted into the flush_list. This should reduce contention on log_sys mutex. Approved by: Heikki
-
vasil authored
Change name from "InnoDB Plugin" to "InnoDB+" and version from 1.0.5 to 1.0.0.
-
- 16 Dec, 2009 1 commit
-
-
vasil authored
Use POSIX_FADV* and posix_fadvise() only if they are available.
-
- 14 Dec, 2009 1 commit
-
-
marko authored
page_update_max_trx_id() when buffering op == IBUF_OP_DELETE. This addresses Issue #319, an assertion failure because trx_id is zero in page_update_max_trx_id() when attempting to buffer a purge operation. (This was a harmless debug assertion failure, because page_update_max_trx_id() would never update to zero.) For the purge transaction, trx->id is always zero. The purge transaction is the only caller of IBUF_OP_DELETE, and PAGE_MAX_TRX_ID is really about existing records. Therefore, there is no need to update the PAGE_MAX_TRX_ID when purging records.
-
- 04 Nov, 2009 1 commit
-
-
sunny authored
------------------------------------------------------------------------ r5971 | marko | 2009-09-23 23:03:51 +1000 (Wed, 23 Sep 2009) | 2 lines branches/zip: os_file_pwrite(): Make the code compile in InnoDB Hot Backup when the pwrite system call is not available. ------------------------------------------------------------------------ r5972 | marko | 2009-09-24 05:44:52 +1000 (Thu, 24 Sep 2009) | 5 lines branches/zip: fil_node_open_file(): In InnoDB Hot Backup, determine the page size of single-file tablespaces before computing the file node size. Otherwise, the space->size of compressed tablespaces would be computed with UNIV_PAGE_SIZE instead of key_block_size. This should fix Issue #313. ------------------------------------------------------------------------ r5973 | marko | 2009-09-24 05:53:21 +1000 (Thu, 24 Sep 2009) | 2 lines branches/zip: recv_add_to_hash_table(): Simplify obfuscated pointer arithmetics. ------------------------------------------------------------------------ r5978 | marko | 2009-09-24 17:47:56 +1000 (Thu, 24 Sep 2009) | 1 line branches/zip: Fix warnings and errors when UNIV_HOTBACKUP is defined. ------------------------------------------------------------------------ r5979 | marko | 2009-09-24 20:16:10 +1000 (Thu, 24 Sep 2009) | 4 lines branches/zip: ha_innodb.cc: Define MYSQL_PLUGIN_IMPORT when necessary. This preprocessor symbol has been recently introduced in MySQL 5.1. The InnoDB Plugin should remain source compatible with MySQL 5.1.24 and later. ------------------------------------------------------------------------ r5988 | calvin | 2009-09-26 05:14:43 +1000 (Sat, 26 Sep 2009) | 8 lines branches/zip: fix bug#47055 unconditional exit(1) on ERROR_WORKING_SET_QUOTA 1453 (0x5AD) for InnoDB backend When error ERROR_WORKING_SET_QUOTA or ERROR_NO_SYSTEM_RESOURCES occurs, yields for 100ms and retries the operation. Approved by: Heikki (on IM) ------------------------------------------------------------------------ r5992 | vasil | 2009-09-28 17:10:29 +1000 (Mon, 28 Sep 2009) | 4 lines branches/zip: Add ChangeLog entry for c5988. ------------------------------------------------------------------------ r5994 | marko | 2009-09-28 18:33:59 +1000 (Mon, 28 Sep 2009) | 17 lines branches/zip: Try to prevent the reuse of tablespace identifiers after InnoDB has crashed during table creation. Also, refuse to start if files with duplicate tablespace identifiers are encountered. fil_node_create(): Update fil_system->max_assigned_id. This should prevent the reuse of a space->id when InnoDB does a full crash recovery and invokes fil_load_single_table_tablespaces(). Normally, fil_system->max_assigned_id is initialized from SELECT MAX(ID) FROM SYS_TABLES. fil_open_single_table_tablespace(): Return FALSE when fil_space_create() fails. fil_load_single_table_tablespace(): Exit if fil_space_create() fails and innodb_force_recovery=0. rb://173 approved by Heikki Tuuri. This addresses Issue #335. ------------------------------------------------------------------------ r5995 | marko | 2009-09-28 18:52:25 +1000 (Mon, 28 Sep 2009) | 17 lines branches/zip: Do not write to PAGE_INDEX_ID after page creation, not even when restoring an uncompressed page after a compression failure. btr_page_reorganize_low(): On compression failure, do not restore those page header fields that should not be affected by the reorganization. Instead, compare the fields. page_zip_decompress(): Add the parameter ibool all, for copying all page header fields. Pass the parameter all=TRUE on block read completion, redo log application, and page_zip_validate(); pass all=FALSE in all other cases. page_zip_reorganize(): Do not restore the uncompressed page on failure. It will be restored (to pre-modification state) by the caller anyway. rb://167, Issue #346 ------------------------------------------------------------------------ r5996 | marko | 2009-09-28 22:46:02 +1000 (Mon, 28 Sep 2009) | 4 lines branches/zip: Address Issue #350 in comments. lock_rec_queue_validate(), lock_rec_queue_validate(): Note that this debug code may violate the latching order and cause deadlocks. ------------------------------------------------------------------------ r5997 | marko | 2009-09-28 23:03:58 +1000 (Mon, 28 Sep 2009) | 12 lines branches/zip: Remove an assertion failure when the InnoDB data dictionary is inconsistent with the MySQL .frm file. ha_innobase::index_read(): When the index cannot be found, return an error. ha_innobase::change_active_index(): When prebuilt->index == NULL, set also prebuilt->index_usable = FALSE. This is not needed for correctness, because prebuilt->index_usable is only checked by row_search_for_mysql(), which requires prebuilt->index != NULL. This addresses Issue #349. Approved by Heikki Tuuri over IM. ------------------------------------------------------------------------ r6005 | vasil | 2009-09-29 18:09:52 +1000 (Tue, 29 Sep 2009) | 4 lines branches/zip: ChangeLog: wrap around 78th column, not earlier. ------------------------------------------------------------------------ r6006 | vasil | 2009-09-29 20:15:25 +1000 (Tue, 29 Sep 2009) | 4 lines branches/zip: Add ChangeLog entry for the release of 1.0.4. ------------------------------------------------------------------------ r6007 | vasil | 2009-09-29 23:19:59 +1000 (Tue, 29 Sep 2009) | 6 lines branches/zip: Fix the year, should be 2009. Pointed by: Calvin ------------------------------------------------------------------------ r6026 | marko | 2009-09-30 17:18:24 +1000 (Wed, 30 Sep 2009) | 1 line branches/zip: Add some debug assertions for checking FSEG_MAGIC_N. ------------------------------------------------------------------------ r6028 | marko | 2009-09-30 23:55:23 +1000 (Wed, 30 Sep 2009) | 3 lines branches/zip: recv_no_log_write: New debug flag for tracking down Mantis Issue #347. No modifications should be made to the database while recv_apply_hashed_log_recs() is about to complete. ------------------------------------------------------------------------ r6029 | calvin | 2009-10-01 06:32:02 +1000 (Thu, 01 Oct 2009) | 4 lines branches/zip: non-functional changes Fix typo. ------------------------------------------------------------------------ r6031 | marko | 2009-10-01 21:24:33 +1000 (Thu, 01 Oct 2009) | 49 lines branches/zip: Clean up after a crash during DROP INDEX. When InnoDB crashes while dropping an index, ensure that the index will be completely dropped during crash recovery. row_merge_drop_index(): Before dropping an index, rename the index to start with TEMP_INDEX_PREFIX_STR and commit the change, so that row_merge_drop_temp_indexes() will drop the index after crash recovery if the server crashes while dropping the index. fseg_inode_try_get(): New function, forked from fseg_inode_get(). Return NULL if the file segment index node is free. fseg_inode_get(): Assert that the file segment index node is not free. fseg_free_step(): If the file segment index node is already free, print a diagnostic message and return TRUE. fsp_free_seg_inode(): Write a nonzero number to FSEG_MAGIC_N, so that allocated-and-freed file segment index nodes can be better distinguished from uninitialized ones. This is rb://174, addressing Issue #348. Tested by restarting mysqld upon the completion of the added log_write_up_to() invocation below, during DROP INDEX. The index was dropped after crash recovery, and re-issuing the DROP INDEX did not crash the server. Index: btr/btr0btr.c =================================================================== --- btr/btr0btr.c (revision 6026) +++ btr/btr0btr.c (working copy) @@ -42,6 +42,7 @@ Created 6/2/1994 Heikki Tuuri #include "ibuf0ibuf.h" #include "trx0trx.h" +#include "log0log.h" /* Latching strategy of the InnoDB B-tree -------------------------------------- @@ -873,6 +874,8 @@ leaf_loop: goto leaf_loop; } + + log_write_up_to(mtr.end_lsn, LOG_WAIT_ALL_GROUPS, TRUE); top_loop: mtr_start(&mtr); ------------------------------------------------------------------------ r6033 | calvin | 2009-10-02 06:19:46 +1000 (Fri, 02 Oct 2009) | 4 lines branches/zip: fix a typo in error message Reported as bug#47763. ------------------------------------------------------------------------ r6043 | inaam | 2009-10-06 01:45:35 +1100 (Tue, 06 Oct 2009) | 12 lines branches/zip rb://176 Do not invalidate buffer pool while an LRU batch is active. Added code to buf_pool_invalidate() to wait for the running batches to finish. This patch also resets the state of buf_pool struct at invalidation. This addresses the concern where buf_pool->freed_page_clock becomes non-zero because we read in a system tablespace page for file format info at startup. Approved by: Marko ------------------------------------------------------------------------ r6044 | pekka | 2009-10-07 01:44:54 +1100 (Wed, 07 Oct 2009) | 5 lines branches/zip: Add os_file_is_same() function for Hot Backup (inside ifdef UNIV_HOTBACKUP). This is part of the fix for Issue #186. Note! The Windows implementation is incomplete. ------------------------------------------------------------------------ r6046 | pekka | 2009-10-08 20:24:56 +1100 (Thu, 08 Oct 2009) | 3 lines branches/zip: Revert r6044 which added os_file_is_same() function (issue#186). This functionality is moved to Hot Backup source tree. ------------------------------------------------------------------------ r6048 | vasil | 2009-10-09 16:42:55 +1100 (Fri, 09 Oct 2009) | 16 lines branches/zip: When scanning a directory readdir() is called and stat() after it, if a file is deleted between the two calls stat will fail and the whole precedure will fail. Change this behavior to continue with the next entry if stat() fails because of nonexistent file. This is transparent change as it will make it look as if the file was deleted before the readdir() call. This change is needed in order to fix https://svn.innodb.com/mantis/view.php?id=174 in which we need to abort if os_file_readdir_next_file() encounters "real" errors. Approved by: Marko, Pekka (rb://177) ------------------------------------------------------------------------ r6049 | vasil | 2009-10-10 03:05:26 +1100 (Sat, 10 Oct 2009) | 7 lines branches/zip: Fix compilation warning in Hot Backup: innodb/fil/fil0fil.c: In function 'fil_load_single_table_tablespace': innodb/fil/fil0fil.c:3253: warning: format '%lld' expects type 'long long int', but argument 6 has type 'ib_int64_t' ------------------------------------------------------------------------ r6064 | calvin | 2009-10-14 02:23:35 +1100 (Wed, 14 Oct 2009) | 4 lines branches/zip: non-functional changes Changes from MySQL to fix build issue. ------------------------------------------------------------------------ r6065 | inaam | 2009-10-14 04:43:13 +1100 (Wed, 14 Oct 2009) | 7 lines branches/zip rb://182 Call fsync() on datafiles after a batch of pages is written to disk even when skip_innodb_doublewrite is set. Approved by: Heikki ------------------------------------------------------------------------ r6080 | sunny | 2009-10-15 09:29:01 +1100 (Thu, 15 Oct 2009) | 3 lines branches/zip: Change page_mem_alloc_free() to inline. Fix Bug #47058 - Failure to compile innodb_plugin on solaris 10u7 + spro cc/CC 5.10 ------------------------------------------------------------------------ r6084 | vasil | 2009-10-15 16:21:17 +1100 (Thu, 15 Oct 2009) | 4 lines branches/zip: Add ChangeLog entry for r6080. ------------------------------------------------------------------------ r6095 | vasil | 2009-10-20 00:04:59 +1100 (Tue, 20 Oct 2009) | 7 lines branches/zip: Fix Bug#47808 innodb_information_schema.test fails when run under valgrind by using the wait_until_rows_count macro that loops until the number of rows becomes 14 instead of sleep 0.1, which is obviously very fragile. ------------------------------------------------------------------------ r6096 | vasil | 2009-10-20 00:06:09 +1100 (Tue, 20 Oct 2009) | 4 lines branches/zip: Add ChangeLog entry for r6095. ------------------------------------------------------------------------ r6099 | jyang | 2009-10-22 13:58:39 +1100 (Thu, 22 Oct 2009) | 7 lines branches/zip: Port bug #46000 related changes from 5.1 to zip branch. Due to different code path for creating index in zip branch comparing to 5.1), the index reserved name check function is extended to be used in ha_innobase::add_index(). rb://190 Approved by: Marko ------------------------------------------------------------------------ r6100 | jyang | 2009-10-22 14:51:07 +1100 (Thu, 22 Oct 2009) | 6 lines branches/zip: As a request from mysql, WARN_LEVEL_ERROR cannot be used for push_warning_* call any more. Switch to WARN_LEVEL_WARN. Bug #47233. rb://172 approved by Sunny Bains and Marko. ------------------------------------------------------------------------ r6101 | jyang | 2009-10-23 19:45:50 +1100 (Fri, 23 Oct 2009) | 7 lines branches/zip: Update test result with the WARN_LEVEL_ERROR to WARN_LEVEL_WARN change. This is the same result as submitted in rb://172 review, which approved by Sunny Bains and Marko. ------------------------------------------------------------------------ r6102 | marko | 2009-10-26 18:32:23 +1100 (Mon, 26 Oct 2009) | 1 line branches/zip: row_prebuilt_struct::prebuilts: Unused field, remove. ------------------------------------------------------------------------ r6103 | marko | 2009-10-27 00:46:18 +1100 (Tue, 27 Oct 2009) | 4 lines branches/zip: row_ins_alloc_sys_fields(): Zero out the system columns DB_TRX_ID, DB_ROLL_PTR and DB_ROW_ID, in order to avoid harmless Valgrind warnings about uninitialized data. (The warnings were harmless, because the fields would be initialized at a later stage.) ------------------------------------------------------------------------ r6105 | calvin | 2009-10-28 09:05:52 +1100 (Wed, 28 Oct 2009) | 6 lines branches/zip: backport r3848 from 6.0 branch ---- branches/6.0: innobase_start_or_create_for_mysql(): Make the 10 MB minimum tablespace limit independent of UNIV_PAGE_SIZE. (Bug #41490) ------------------------------------------------------------------------ r6107 | marko | 2009-10-29 01:10:34 +1100 (Thu, 29 Oct 2009) | 5 lines branches/zip: buf_page_set_old(): Improve UNIV_LRU_DEBUG diagnostics in order to catch the buf_pool->LRU_old corruption reported in Issue #381. buf_LRU_old_init(): Set the property from the tail towards the front of the buf_pool->LRU list, in order not to trip the debug check. ------------------------------------------------------------------------ r6108 | calvin | 2009-10-29 16:58:04 +1100 (Thu, 29 Oct 2009) | 5 lines branches/zip: close file handle when building with UNIV_HOTBACKUP The change does not affect regular InnoDB engine. Confirmed by Marko. ------------------------------------------------------------------------ r6109 | jyang | 2009-10-29 19:37:32 +1100 (Thu, 29 Oct 2009) | 7 lines branches/zip: In os_mem_alloc_large(), if we fail to attach the shared memory, reset memory pointer ptr to NULL, and allocate memory from conventional pool. Bug #48237 Error handling in os_mem_alloc_large appears to be incorrect rb://198 Approved by: Marko ------------------------------------------------------------------------ r6110 | marko | 2009-10-29 21:44:57 +1100 (Thu, 29 Oct 2009) | 2 lines branches/zip: Makefile.am (INCLUDES): Merge a change from MySQL: Use $(srcdir)/include instead of $(top_srcdir)/storage/innobase/include. ------------------------------------------------------------------------ r6111 | marko | 2009-10-29 22:04:11 +1100 (Thu, 29 Oct 2009) | 33 lines branches/zip: Fix corruption of buf_pool->LRU_old and improve debug assertions. This was reported as Issue #381. buf_page_set_old(): Assert that blocks may only be set old if buf_pool->LRU_old is initialized and buf_pool->LRU_old_len is nonzero. Assert that buf_pool->LRU_old points to the block at the old/new boundary. buf_LRU_old_adjust_len(): Invoke buf_page_set_old() after adjusting buf_pool->LRU_old and buf_pool->LRU_old_len, in order not to violate the added assertions. buf_LRU_old_init(): Replace buf_page_set_old() with a direct assignment to bpage->old, because these loops that initialize all the blocks would temporarily violate the assertions about buf_pool->LRU_old. buf_LRU_remove_block(): When setting buf_pool->LRU_old = NULL, also clear all bpage->old flags and set buf_pool->LRU_old_len = 0. buf_LRU_add_block_to_end_low(), buf_LRU_add_block_low(): Move the buf_page_set_old() call later in order not to violate the debug assertions. If buf_pool->LRU_old is NULL, set old=FALSE. buf_LRU_free_block(): Replace the UNIV_LRU_DEBUG assertion with a dummy buf_page_set_old() call that performs more thorough checks. buf_LRU_validate(): Do not tolerate garbage in buf_pool->LRU_old_len even if buf_pool->LRU_old is NULL. Check that bpage->old is monotonic. buf_relocate(): Make the UNIV_LRU_DEBUG checks stricter. buf0buf.h: Revise the documentation of buf_page_t::old and buf_pool_t::LRU_old_len. ------------------------------------------------------------------------ r6112 | calvin | 2009-10-30 01:21:15 +1100 (Fri, 30 Oct 2009) | 4 lines branches/zip: consideration for icc compilers Proposed by MySQL, and approved by Marko. ------------------------------------------------------------------------ r6113 | vasil | 2009-10-30 03:15:50 +1100 (Fri, 30 Oct 2009) | 93 lines branches/zip: Merge r5912:6112 from branches/5.1: (after this merge the innodb-autoinc test starts to fail, but I commit anyway because it would be easier to investigate the failure this way) ------------------------------------------------------------------------ r5952 | calvin | 2009-09-22 19:45:07 +0300 (Tue, 22 Sep 2009) | 7 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: fix bug#42383: Can't create table 'test.bug39438' For embedded server, MySQL may pass in full path, which is currently disallowed. It is needed to relax the condition by accepting full paths in the embedded case. Approved by: Heikki (on IM) ------------------------------------------------------------------------ r6032 | vasil | 2009-10-01 15:55:49 +0300 (Thu, 01 Oct 2009) | 8 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Fix Bug#38996 Race condition in ANALYZE TABLE by serializing ANALYZE TABLE inside InnoDB. Approved by: Heikki (rb://175) ------------------------------------------------------------------------ r6045 | jyang | 2009-10-08 02:27:08 +0300 (Thu, 08 Oct 2009) | 7 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug47777.result A /branches/5.1/mysql-test/innodb_bug47777.test branches/5.1: Fix bug #47777. Treat the Geometry data same as Binary BLOB in ha_innobase::store_key_val_for_row(), since the Geometry data is stored as Binary BLOB in Innodb. Review: rb://180 approved by Marko Makela. ------------------------------------------------------------------------ r6051 | sunny | 2009-10-12 07:05:00 +0300 (Mon, 12 Oct 2009) | 6 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Ignore negative values supplied by the user when calculating the next value to store in dict_table_t. Setting autoincrement columns top negative values is undefined behavior and this change should bring the behavior of InnoDB closer to what users expect. Added several tests to check. rb://162 ------------------------------------------------------------------------ r6052 | sunny | 2009-10-12 07:09:56 +0300 (Mon, 12 Oct 2009) | 4 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Reset the statement level autoinc counter on ROLLBACK. Fix the test results too. rb://164 ------------------------------------------------------------------------ r6053 | sunny | 2009-10-12 07:37:49 +0300 (Mon, 12 Oct 2009) | 6 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Copy the maximum AUTOINC value from the old table to the new table when MySQL does a CREATE INDEX ON T. This is required because MySQL does a table copy, rename and drops the old table. Fix Bug#47125: auto_increment start value is ignored if an index is created and engine=innodb rb://168 ------------------------------------------------------------------------ r6076 | vasil | 2009-10-14 19:30:12 +0300 (Wed, 14 Oct 2009) | 4 lines Changed paths: M /branches/5.1/row/row0mysql.c branches/5.1: Fix typo. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6114 | vasil | 2009-10-30 03:43:51 +1100 (Fri, 30 Oct 2009) | 6 lines branches/zip: * Add ChangeLog entries for latest changes * Obey alphabetical order in the list of the files * White-space fixup ------------------------------------------------------------------------ r6121 | sunny | 2009-10-30 10:42:11 +1100 (Fri, 30 Oct 2009) | 7 lines branches/zip: This test has been problematic for sometime now. The underlying bug is that the data dictionaries get out of sync. In the AUTOINC code we try and apply salve to the symptoms. In the past MySQL made some unrelated change and the dictionaries stopped getting out of sync and this test started to fail. Now, it seems they have reverted that changed and the test is passing again. I suspect this is not he last time that this test will change. ------------------------------------------------------------------------ r6124 | jyang | 2009-10-30 19:02:31 +1100 (Fri, 30 Oct 2009) | 5 lines branches/zip: Correct the bug number for -r6109 change from # 48273 to #48237 ------------------------------------------------------------------------ r6126 | vasil | 2009-10-30 19:36:07 +1100 (Fri, 30 Oct 2009) | 45 lines branches/zip: Merge r6112:6125 from branches/5.1: (skipping r6122 and r6123, Jimmy says these are already present and need not be merged): ------------------------------------------------------------------------ r6122 | jyang | 2009-10-30 05:18:38 +0200 (Fri, 30 Oct 2009) | 7 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb_bug44369.result M /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/mysql-test/innodb_bug46000.result M /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Chnage WARN_LEVEL_ERROR to WARN_LEVEL_WARN for push_warning_printf() call in innodb. Fix Bug#47233: Innodb calls push_warning(MYSQL_ERROR::WARN_LEVEL_ERROR) rb://170 approved by Marko. ------------------------------------------------------------------------ r6123 | jyang | 2009-10-30 05:43:06 +0200 (Fri, 30 Oct 2009) | 8 lines Changed paths: M /branches/5.1/os/os0proc.c branches/5.1: In os_mem_alloc_large(), if we fail to attach the shared memory, reset memory pointer ptr to NULL, and allocate memory from conventional pool. This is a port from branches/zip. Bug #48237 Error handling in os_mem_alloc_large appears to be incorrect rb://198 Approved by: Marko ------------------------------------------------------------------------ r6125 | vasil | 2009-10-30 10:31:23 +0200 (Fri, 30 Oct 2009) | 4 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: White-space fixup. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r6130 | marko | 2009-11-02 20:42:56 +1100 (Mon, 02 Nov 2009) | 9 lines branches/zip: Free all resources at shutdown. Set pointers to NULL, so that Valgrind will not complain about freed data structures that are reachable via pointers. This addresses Bug #45992 and Bug #46656. This patch is mostly based on changes copied from branches/embedded-1.0, mainly c5432, c3439, c3134, c2994, c2978, but also some other code was copied. Some added cleanup code is specific to MySQL/InnoDB. rb://199 approved by Sunny Bains ------------------------------------------------------------------------
-
- 14 Oct, 2009 2 commits
-
-
calvin authored
Suggested by Marko.
-
-
- 13 Oct, 2009 1 commit
-
-
calvin authored
Also reorder the file list.
-
- 28 Sep, 2009 1 commit
-
-
inaam authored
------------------------------------------------------------------------ r5971 | marko | 2009-09-23 09:03:51 -0400 (Wed, 23 Sep 2009) | 2 lines branches/zip: os_file_pwrite(): Make the code compile in InnoDB Hot Backup when the pwrite system call is not available. ------------------------------------------------------------------------ r5956 | calvin | 2009-09-22 19:30:10 -0400 (Tue, 22 Sep 2009) | 4 lines branches/zip: remove handler0vars.h from Makefile.am Left over from r5950. ------------------------------------------------------------------------ r5951 | calvin | 2009-09-22 11:17:01 -0400 (Tue, 22 Sep 2009) | 4 lines branches/zip: adjust CMake file to work with old versions of MySQL Tested with MySQL 5.1.38 and 5.1.30. ------------------------------------------------------------------------ r5950 | calvin | 2009-09-22 02:42:46 -0400 (Tue, 22 Sep 2009) | 17 lines branches/zip: adjust Windows loading method for 5.1.38 Starting at 5.1.38, MySQL server exports symbols needed for dynamic plugin on Windows. There is no need for Windows specific loading. Also, the CMake files are simplified in 5.1.38. When WITH_INNOBASE_STORAGE_ENGINE is specified during configuration (win\configure.js), InnoDB is built as a static library. Otherwise, a dynamic InnoDB will be built (ha_innodb.dll). CMakeLists.txt requires minor changes in order to work with MySQL prior to 5.1.38. The changes will be in a separate patch. This patch addresses Mantis issue#286. ------------------------------------------------------------------------ r5945 | calvin | 2009-09-21 10:53:22 -0400 (Mon, 21 Sep 2009) | 4 lines branches/zip: fix a type in r5935 Should be innodb_open_files, spotted by Michael. ------------------------------------------------------------------------ r5940 | vasil | 2009-09-21 01:26:04 -0400 (Mon, 21 Sep 2009) | 4 lines branches/zip: Add ChangeLog entries for c5938. ------------------------------------------------------------------------ r5938 | calvin | 2009-09-19 03:14:25 -0400 (Sat, 19 Sep 2009) | 41 lines branches/zip: Merge revisions 2584:2956 from branches/6.0, except c2932. Bug#37232 and bug#31183 were fixed in the 6.0 branch only. They should be fixed in the plugin too, specially MySQL 6.0 is discontinued at this point. ------------------------------------------------------------------------ r2604 | inaam | 2008-08-21 09:37:06 -0500 (Thu, 21 Aug 2008) | 8 lines branches/6.0 bug#37232 Relax locking behaviour for REPLACE INTO t SELECT ... FROM t1. Now SELECT on t1 is performed as a consistent read when the isolation level is set to READ COMMITTED. Reviewed by: Heikki ------------------------------------------------------------------------ r2605 | inaam | 2008-08-21 09:59:33 -0500 (Thu, 21 Aug 2008) | 7 lines branches/6.0 Added a comment to clarify why distinct calls to read MySQL binary log file name and log position do not entail any race condition. Suggested by: Heikki ------------------------------------------------------------------------ r2956 | inaam | 2008-11-04 04:47:30 -0600 (Tue, 04 Nov 2008) | 11 lines branches/6.0 bug#31183 If the system tablespace runs out of space because 'autoextend' is not specified with innodb_data_file_path there was no error message printed to the error log. The client would get 'table full' error. This patch prints an appropriate error message to the error log. rb://43 Approved by: Marko ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5935 | calvin | 2009-09-18 17:08:02 -0400 (Fri, 18 Sep 2009) | 6 lines branches/zip: fix bug#44338; minor non-functional changes Bug#44338 innodb has message about non-existing option innodb_max_files_open. Change the option to innodb_open_files. The fix was committed into 6.0 branch. ------------------------------------------------------------------------ r5934 | vasil | 2009-09-18 13:06:46 -0400 (Fri, 18 Sep 2009) | 4 lines branches/zip: Fix typo. ------------------------------------------------------------------------ r5924 | vasil | 2009-09-18 00:59:30 -0400 (Fri, 18 Sep 2009) | 4 lines branches/zip: White space and formatting cleanup in the ChangeLog ------------------------------------------------------------------------ r5922 | marko | 2009-09-17 02:32:08 -0400 (Thu, 17 Sep 2009) | 4 lines branches/zip: innodb-zip.test: Make the test work with zlib 1.2.3.3. Apparently, the definition of compressBound() has slightly changed. This has been filed as Mantis Issue #345. ------------------------------------------------------------------------ r5920 | vasil | 2009-09-16 14:47:22 -0400 (Wed, 16 Sep 2009) | 4 lines branches/zip: Add ChangeLog entries for r5916. ------------------------------------------------------------------------ r5919 | vasil | 2009-09-16 14:37:13 -0400 (Wed, 16 Sep 2009) | 4 lines branches/zip: Whitespace cleanup in the ChangeLog. ------------------------------------------------------------------------ r5917 | marko | 2009-09-16 05:56:23 -0400 (Wed, 16 Sep 2009) | 1 line branches/zip: innobase_get_cset_width(): Cache the value of current_thd. ------------------------------------------------------------------------ r5916 | marko | 2009-09-16 05:54:43 -0400 (Wed, 16 Sep 2009) | 128 lines branches/zip: Merge revisions 5622:5912 from branches/5.1, except r5700 (changes to CMakeLists.txt) ------------------------------------------------------------------------ r5622 | vasil | 2009-08-03 15:27:00 +0300 (Mon, 03 Aug 2009) | 20 lines Changed paths: M /branches/5.1/Makefile.am branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2988 committer: Satya B <satya.bn@sun.com> branch nick: mysql-5.1-bugteam timestamp: Wed 2009-07-01 11:06:05 +0530 message: Fix build failure after applying Innodb snapshot 5.1-ss5282 After applying Innodb snapshot 5.1-ss5282, build was broken because of missing header file. Adding the header file to Makefile.am after informing the innodb developers. modified: storage/innobase/Makefile.am ------------------------------------------------------------------------ r5740 | jyang | 2009-09-03 06:33:47 +0300 (Thu, 03 Sep 2009) | 5 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/db0err.h A /branches/5.1/mysql-test/innodb_bug46000.result A /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Disallow creating index with the name of "GEN_CLUST_INDEX" which is reserved for the default system primary index. (Bug #46000) rb://149 approved by Sunny Bains. ------------------------------------------------------------------------ r5741 | jyang | 2009-09-03 07:16:01 +0300 (Thu, 03 Sep 2009) | 5 lines Changed paths: M /branches/5.1/dict/dict0dict.c M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug44369.result A /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/row/row0mysql.c branches/5.1: Block creating table with column name conflicting with Innodb reserved key words. (Bug #44369) rb://151 approved by Sunny Bains. ------------------------------------------------------------------------ r5757 | jyang | 2009-09-04 04:26:13 +0300 (Fri, 04 Sep 2009) | 3 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/db0err.h D /branches/5.1/mysql-test/innodb_bug46000.result D /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Revert change in 5740. Making the fix in a subsequent check in. ------------------------------------------------------------------------ r5760 | jyang | 2009-09-04 07:07:34 +0300 (Fri, 04 Sep 2009) | 3 lines Changed paths: M /branches/5.1/dict/dict0dict.c M /branches/5.1/handler/ha_innodb.cc D /branches/5.1/mysql-test/innodb_bug44369.result D /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/row/row0mysql.c branches/5.1: This is to revert change 5741. A return status for create_table_def() needs to be fixed. ------------------------------------------------------------------------ r5797 | calvin | 2009-09-09 18:26:29 +0300 (Wed, 09 Sep 2009) | 3 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: merge change from 5.1.38 HA_ERR_TOO_MANY_CONCURRENT_TRXS is added in 5.1.38. ------------------------------------------------------------------------ r5799 | calvin | 2009-09-09 20:47:31 +0300 (Wed, 09 Sep 2009) | 10 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: fix bug#46256 Allow tables to be dropped even if the collation is not found, but issue a warning. Could not find an easy way to add mysql-test since it requires changes to charsets and restarting the server. Tests were executed manually. Approved by: Heikki (on IM) ------------------------------------------------------------------------ r5805 | vasil | 2009-09-10 08:41:48 +0300 (Thu, 10 Sep 2009) | 7 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Fix a compilation warning caused by c5799: handler/ha_innodb.cc: In function 'void innobase_get_cset_width(ulint, ulint*, ulint*)': handler/ha_innodb.cc:830: warning: format '%d' expects type 'int', but argument 2 has type 'ulint' ------------------------------------------------------------------------ r5834 | jyang | 2009-09-11 00:43:05 +0300 (Fri, 11 Sep 2009) | 5 lines Changed paths: M /branches/5.1/dict/dict0dict.c M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug44369.result A /branches/5.1/mysql-test/innodb_bug44369.test M /branches/5.1/row/row0mysql.c branches/5.1: Block creating table with column name conflicting with Innodb reserved key words. (Bug #44369) rb://151 approved by Sunny Bains. ------------------------------------------------------------------------ r5895 | jyang | 2009-09-15 03:39:21 +0300 (Tue, 15 Sep 2009) | 5 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug46000.result A /branches/5.1/mysql-test/innodb_bug46000.test branches/5.1: Disallow creating index with the name of "GEN_CLUST_INDEX" which is reserved for the default system primary index. (Bug #46000) rb://149 approved by Marko Makela. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5910 | marko | 2009-09-16 04:07:21 -0400 (Wed, 16 Sep 2009) | 9 lines branches/zip: Introduce UNIV_LOG_LSN_DEBUG and MLOG_LSN for redo log diagnostics. This was written in order to better track down Issue #313 in InnoDB Hot Backup. MLOG_LSN: A new redo log entry type, for recording the current log sequence number (LSN). This will be checked in an assertion in recv_parse_log_rec(). rb://161, discussed with Sunny and Vasil. ------------------------------------------------------------------------ r5899 | marko | 2009-09-15 07:26:01 -0400 (Tue, 15 Sep 2009) | 4 lines branches/zip: ut0ut.h: Do not #include "os0sync.h" #ifdef UNIV_HOTBACKUP. Since r5872, the InnoDB Hot Backup build was broken. Fix it by not defining any thread synchronization primitives in ut0ut.h. InnoDB Hot Backup is a single-threaded program. ------------------------------------------------------------------------ r5898 | marko | 2009-09-15 06:18:50 -0400 (Tue, 15 Sep 2009) | 2 lines branches/zip: Add */.dirstamp to svn:ignore, for https://svn.innodb.com/svn/hotbackup/branches/3.5 ------------------------------------------------------------------------ r5897 | marko | 2009-09-15 04:29:00 -0400 (Tue, 15 Sep 2009) | 8 lines branches/zip: Avoid bogus messages about latching order violations when UNIV_SYNC_DEBUG is defined. sync_thread_levels_g(): Add the parameter "warn". Do not print anything unless it is set. sync_thread_add_level(): Pass warn=TRUE to sync_thread_levels_g() when the check is within an assertion; FALSE if it is not. ------------------------------------------------------------------------ r5893 | inaam | 2009-09-14 11:20:48 -0400 (Mon, 14 Sep 2009) | 10 lines branches/zip rb://159 In case of pages that are not made young the counter is incremented only when the page in question is 'old'. In case of pages that are made young the counter is incremented in case of all pages. For apple to apple comparison this patch changes the 'young-making' counter to consider only 'old' blocks. Approved by: Marko ------------------------------------------------------------------------ r5889 | vasil | 2009-09-14 05:17:18 -0400 (Mon, 14 Sep 2009) | 5 lines branches/zip: Add missing return statement in the test program that could have caused a warning. ------------------------------------------------------------------------ r5888 | vasil | 2009-09-14 04:38:45 -0400 (Mon, 14 Sep 2009) | 40 lines branches/zip: Back-merge c5880 and c5881 from branches/embedded-1.0: ------------------------------------------------------------------------ r5880 | vasil | 2009-09-12 17:28:44 +0300 (Sat, 12 Sep 2009) | 18 lines Changed paths: M /branches/embedded-1.0/configure.in M /branches/embedded-1.0/include/os0sync.h M /branches/embedded-1.0/srv/srv0start.c branches/embedded-1.0: Clean up and simplify the code that surrounds the atomic ops: * Simplify the code that prints what atomics are used: Instead of repeating the same conditions on which each atomics are used use just one printf that prints a variable defined by the code which chooses what atomics to use. * In os0sync.h pick up each atomic variant only if it has been selected by autoconf (based on IB_ATOMIC_MODE_* macros). Define the startup message to be printed. * In configure.in: check what user has chosen and if he has chosen something that is not available, emit an error. If nothing has been chosen explicitly by the user, auto select an option according to the described logic in configure.in. ------------------------------------------------------------------------ r5881 | vasil | 2009-09-12 20:08:27 +0300 (Sat, 12 Sep 2009) | 4 lines Changed paths: M /branches/embedded-1.0/configure.in branches/embedded-1.0: Fix syntax error in test program. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5875 | vasil | 2009-09-12 08:11:25 -0400 (Sat, 12 Sep 2009) | 4 lines branches/zip: Remove unnecessary macro. ------------------------------------------------------------------------ r5872 | vasil | 2009-09-12 05:35:17 -0400 (Sat, 12 Sep 2009) | 5 lines branches/zip: Explicitly include os0sync.h to the places where HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS are used to avoid potential problems. ------------------------------------------------------------------------ r5871 | vasil | 2009-09-12 05:25:44 -0400 (Sat, 12 Sep 2009) | 6 lines branches/zip: Rename HAVE_SOLARIS_ATOMICS to HAVE_IB_SOLARIS_ATOMICS and IB_HAVE_PAUSE_INSTRUCTION to HAVE_IB_PAUSE_INSTRUCTION so they all follow the same HAVE_IB_* convention. ------------------------------------------------------------------------ r5870 | vasil | 2009-09-12 05:13:44 -0400 (Sat, 12 Sep 2009) | 7 lines branches/zip: Define HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS in os0sync.h instead of in univ.i. The code expects os_*() macros to be present if HAVE_ATOMIC_BUILTINS and INNODB_RW_LOCKS_USE_ATOMICS are defined. So define them next to defining the os_*() macros. ------------------------------------------------------------------------ r5869 | vasil | 2009-09-12 04:33:11 -0400 (Sat, 12 Sep 2009) | 15 lines branches/zip: Include ut0auxconf.h only if none of the macros it would define is defined. The check when to include this header was outdated from the time when there was only one macro involved. Move the atomics checks that are in univ.i outside of #if windows ... #else ... #endif This simplifies the code and removes some duplicates like defining HAVE_ATOMIC_BUILTINS if HAVE_WINDOWS_ATOMICS is defined in both branches. Do not define the same macro HAVE_ATOMIC_PTHREAD_T for different events. Instead define HAVE_IB_ATOMIC_PTHREAD_T_GCC and HAVE_IB_ATOMIC_PTHREAD_T_SOLARIS. ------------------------------------------------------------------------ r5868 | vasil | 2009-09-12 04:01:17 -0400 (Sat, 12 Sep 2009) | 6 lines branches/zip: Move the check whether to include ut0auxconf.h before everything because we are now even checking for GCC atomics, we relied on MySQL to define this macro before. ------------------------------------------------------------------------ r5867 | vasil | 2009-09-12 03:43:45 -0400 (Sat, 12 Sep 2009) | 4 lines branches/zip: Update comment to reflect reality. ------------------------------------------------------------------------ r5866 | vasil | 2009-09-12 03:30:08 -0400 (Sat, 12 Sep 2009) | 5 lines branches/zip: Add the check for GCC atomics to ut0auxconf* (copied from plug.in) because we no longer rely on MySQL's HAVE_GCC_ATOMIC_BUILTINS. ------------------------------------------------------------------------ r5865 | vasil | 2009-09-12 03:26:03 -0400 (Sat, 12 Sep 2009) | 10 lines branches/zip: Simplify the compile time checks by splittig them into 5 independent checks: * Whether GCC atomics are available * Whether pthread_t can be used by GCC atomics * Whether Solaris libc atomics are available * Whether pthread_t can be used by Solaris libs atomics * Checking the size of pthread_t ------------------------------------------------------------------------ r5864 | vasil | 2009-09-12 03:22:55 -0400 (Sat, 12 Sep 2009) | 4 lines branches/zip: Include string.h which is needed for memset(). ------------------------------------------------------------------------ r5863 | vasil | 2009-09-12 03:07:08 -0400 (Sat, 12 Sep 2009) | 10 lines branches/zip: Check that pthread_t can indeed be passed to Solaris atomic functions, instead of assuming that it can be passed if 0 can be assigned to it. It could be that: * 0 can be assigned, but pthread_t cannot be passed and * 0 cannot be assigned but pthread_t can be passed Better to check what we are interested in, not something else and make assumptions. ------------------------------------------------------------------------ r5858 | vasil | 2009-09-11 13:46:47 -0400 (Fri, 11 Sep 2009) | 4 lines branches/zip: Fix the indentation of the closing bracket. ------------------------------------------------------------------------ r5826 | marko | 2009-09-10 07:29:46 -0400 (Thu, 10 Sep 2009) | 12 lines branches/zip: Roll back recovered dictionary transactions before dropping incomplete indexes (Issue #337). trx_rollback_or_clean_recovered(ibool all): New function, split from trx_rollback_or_clean_all_recovered(). all==FALSE will only roll back dictionary transactions. recv_recovery_from_checkpoint_finish(): Call trx_rollback_or_clean_recovered(FALSE) before row_merge_drop_temp_indexes(). rb://158 approved by Sunny Bains ------------------------------------------------------------------------ r5825 | marko | 2009-09-10 06:47:09 -0400 (Thu, 10 Sep 2009) | 20 lines branches/zip: Reduce mutex contention that was introduced when addressing Bug #45015 (Issue #316), in r5703. buf_page_set_accessed_make_young(): New auxiliary function, called by buf_page_get_zip(), buf_page_get_gen(), buf_page_optimistic_get_func(). Call ut_time_ms() outside of buf_pool_mutex. Use cached access_time. buf_page_set_accessed(): Add the parameter time_ms, so that ut_time_ms() need not be called while holding buf_pool_mutex. buf_page_optimistic_get_func(), buf_page_get_known_nowait(): Read buf_page_t::access_time without holding buf_pool_mutex. This should be OK, because the field is only used for heuristic purposes. buf_page_peek_if_too_old(): If buf_pool->freed_page_clock == 0, return FALSE, so that we will not waste time moving blocks in the LRU list in the warm-up phase or when the workload fits in the buffer pool. rb://156 approved by Sunny Bains ------------------------------------------------------------------------ r5822 | marko | 2009-09-10 06:10:20 -0400 (Thu, 10 Sep 2009) | 1 line branches/zip: buf_page_release(): De-stutter the function comment. ------------------------------------------------------------------------ r5804 | marko | 2009-09-10 01:29:31 -0400 (Thu, 10 Sep 2009) | 1 line branches/zip: trx_cleanup_at_db_startup(): Fix a typo in comment. ------------------------------------------------------------------------ r5798 | calvin | 2009-09-09 11:28:10 -0400 (Wed, 09 Sep 2009) | 5 lines branches/zip: HA_ERR_TOO_MANY_CONCURRENT_TRXS is added in 5.1.38. But the plugin should still work with previous versions of MySQL. ------------------------------------------------------------------------ r5792 | vasil | 2009-09-09 09:35:58 -0400 (Wed, 09 Sep 2009) | 32 lines branches/zip: Fix a bug in manipulating the variable innodb_old_blocks_pct: for any value assigned it got that value -1, except for 75. When assigned 75, it got 75. mysql> set global innodb_old_blocks_pct=15; Query OK, 0 rows affected (0.00 sec) mysql> show variables like 'innodb_old_blocks_pct'; +-----------------------+-------+ | Variable_name | Value | +-----------------------+-------+ | innodb_old_blocks_pct | 14 | +-----------------------+-------+ 1 row in set (0.00 sec) mysql> set global innodb_old_blocks_pct=75; Query OK, 0 rows affected (0.00 sec) mysql> show variables like 'innodb_old_blocks_pct'; +-----------------------+-------+ | Variable_name | Value | +-----------------------+-------+ | innodb_old_blocks_pct | 75 | +-----------------------+-------+ After the fix it gets exactly what was assigned. Approved by: Marko (via IM) ------------------------------------------------------------------------ r5783 | marko | 2009-09-09 03:25:00 -0400 (Wed, 09 Sep 2009) | 1 line branches/zip: buf_page_is_accessed(): Correct the function comment. ------------------------------------------------------------------------ r5782 | marko | 2009-09-09 03:00:59 -0400 (Wed, 09 Sep 2009) | 2 lines branches/zip: buf_page_peek_if_too_old(): Silence a compiler warning that was introduced in r5779 on 32-bit systems. ------------------------------------------------------------------------ r5780 | marko | 2009-09-09 02:50:50 -0400 (Wed, 09 Sep 2009) | 1 line branches/zip: ut_time_ms(): Return ulint, not uint. ------------------------------------------------------------------------ r5779 | marko | 2009-09-09 02:17:19 -0400 (Wed, 09 Sep 2009) | 2 lines branches/zip: buf_page_peek_if_too_old(): Make the bitmasking work when buf_pool->freed_page_clock is wider than 32 bits. ------------------------------------------------------------------------ r5777 | marko | 2009-09-08 11:50:25 -0400 (Tue, 08 Sep 2009) | 2 lines branches/zip: Remove BUF_LRU_INITIAL_RATIO, which should have been removed together with buf_LRU_get_recent_limit(). ------------------------------------------------------------------------ r5775 | calvin | 2009-09-07 17:15:05 -0400 (Mon, 07 Sep 2009) | 13 lines branches/zip: Build InnoDB on Windows with UNIV_HOTBACKUP The changes are non-functional changes for normal InnoDB, but needed for building the Hot Backup on Windows (with UNIV_HOTBACKUP defined). - Define os_aio_use_native_aio for HB. - Do not acquire seek mutexes for backup since HB is single threaded. - Do not use srv_flush_log_at_trx_commit for HB build rb://155 Approved by: Marko ------------------------------------------------------------------------ r5752 | marko | 2009-09-03 10:55:51 -0400 (Thu, 03 Sep 2009) | 10 lines branches/zip: recv_recover_page_func(): Write the log sequence number to the compressed page, if there is one. Previously, the function only wrote the LSN to the uncompressed page. It is not clear why recv_recover_page_func() is updating FIL_PAGE_LSN in the buffer pool. The log sequence number will be stamped on the page when it is flushed to disk, in buf_flush_init_for_writing(). I noticed this inconsistency when analyzing Issue #313, but this patch does not fix it. That is no surprise, since FIL_PAGE_LSN should only matter on disk files, not in the buffer pool. ------------------------------------------------------------------------ r5751 | marko | 2009-09-03 10:36:15 -0400 (Thu, 03 Sep 2009) | 7 lines branches/zip: row_merge(): Remove a bogus debug assertion that was triggered when creating an index on an empty table. row_merge_sort(): Add debug assertions and comments that justify the loop termination condition. The bogus assertion ut_ad(ihalf > 0) was reported by Michael. ------------------------------------------------------------------------ r5748 | marko | 2009-09-03 07:05:44 -0400 (Thu, 03 Sep 2009) | 1 line branches/zip: MLOG_MULTI_REC_END: Correct the comment. ------------------------------------------------------------------------ r5747 | marko | 2009-09-03 06:46:38 -0400 (Thu, 03 Sep 2009) | 2 lines branches/zip: recv_scan_log_recs(): Replace while with do...while, because the termination condition will always hold on the first iteration. ------------------------------------------------------------------------ r5746 | marko | 2009-09-03 04:55:36 -0400 (Thu, 03 Sep 2009) | 2 lines branches/zip: log_reserve_and_write_fast(): Do not cache the log_sys pointer in a local variable. ------------------------------------------------------------------------ r5745 | marko | 2009-09-03 04:38:22 -0400 (Thu, 03 Sep 2009) | 2 lines branches/zip: log_check_log_recs(): Enclose in #ifdef UNIV_LOG_DEBUG. Add const qualifiers. ------------------------------------------------------------------------ r5744 | marko | 2009-09-03 04:28:35 -0400 (Thu, 03 Sep 2009) | 1 line branches/zip: ut_align(): Make ptr const, like in ut_align_down(). ------------------------------------------------------------------------ r5743 | marko | 2009-09-03 02:36:12 -0400 (Thu, 03 Sep 2009) | 3 lines branches/zip: log_reserve_and_write_fast(): Remove the redundant output parameter "success". Success is also indicated by a nonzero return value. ------------------------------------------------------------------------ r5736 | marko | 2009-09-02 03:53:19 -0400 (Wed, 02 Sep 2009) | 1 line branches/zip: Enclose some timestamp functions in #ifndef UNIV_HOTBACKUP. ------------------------------------------------------------------------ r5735 | marko | 2009-09-02 03:43:09 -0400 (Wed, 02 Sep 2009) | 2 lines branches/zip: univ.i: Do not undefine PACKAGE or VERSION. InnoDB source code does not refer to these macros. ------------------------------------------------------------------------ r5734 | sunny | 2009-09-02 03:08:45 -0400 (Wed, 02 Sep 2009) | 2 lines branches/zip: Update ChangeLog with r5733 changes. ------------------------------------------------------------------------ r5733 | sunny | 2009-09-02 03:05:15 -0400 (Wed, 02 Sep 2009) | 6 lines branches/zip: Fix a regression introduced by the fix for bug#26316. We check whether a transaction holds any AUTOINC locks before we acquire the kernel mutex and release those locks. Fix for rb://153. Approved by Marko. ------------------------------------------------------------------------ r5716 | vasil | 2009-08-31 03:47:49 -0400 (Mon, 31 Aug 2009) | 9 lines branches/zip: Fix Bug#46718 InnoDB plugin incompatible with gcc 4.1 (at least: on PPC): "Undefined symbol" by implementing our own check in plug.in instead of using the result from the check from MySQL because it is insufficient. Approved by: Marko (rb://154) ------------------------------------------------------------------------ r5714 | marko | 2009-08-31 02:10:10 -0400 (Mon, 31 Aug 2009) | 5 lines branches/zip: buf_chunk_not_freed(): Do not acquire block->mutex unless block->page.state == BUF_BLOCK_FILE_PAGE. Check that block->page.state makes sense. Approved by Sunny Bains over the IM. ------------------------------------------------------------------------ r5709 | inaam | 2009-08-28 02:22:46 -0400 (Fri, 28 Aug 2009) | 5 lines branches/zip rb://152 Disable display of deprecated parameter innodb_file_io_threads in 'show variables'. ------------------------------------------------------------------------ r5708 | inaam | 2009-08-27 18:43:32 -0400 (Thu, 27 Aug 2009) | 4 lines branches/zip Remove redundant TRUE : FALSE from the return statement ------------------------------------------------------------------------ r5707 | inaam | 2009-08-27 12:20:35 -0400 (Thu, 27 Aug 2009) | 6 lines branches/zip Remove unused macros as we erased the random readahead code in r5703. Also fixed some comments. ------------------------------------------------------------------------ r5706 | inaam | 2009-08-27 12:00:27 -0400 (Thu, 27 Aug 2009) | 20 lines branches/zip rb://147 Done away with following two status variables: innodb_buffer_pool_read_ahead_rnd innodb_buffer_pool_read_ahead_seq Introduced two new status variables: innodb_buffer_pool_read_ahead = number of pages read as part of readahead since server startup innodb_buffer_pool_read_ahead_evicted = number of pages that are read in as readahead but were evicted before ever being accessed since server startup i.e.: a measure of how badly our readahead is performing SHOW INNODB STATUS will show two extra numbers in buffer pool section: pages read ahead/sec and pages evicted without access/sec Approved by: Marko ------------------------------------------------------------------------ r5705 | marko | 2009-08-27 07:56:24 -0400 (Thu, 27 Aug 2009) | 11 lines branches/zip: dict_index_find_cols(): On column name lookup failure, return DB_CORRUPTION (HA_ERR_CRASHED) instead of abnormally terminating the server. Also, disable the previously added diagnostic output to the error log, because mysql-test-run does not like extra output in the error log. (Bug #44571) dict_index_add_to_cache(): Handle errors from dict_index_find_cols(). mysql-test/innodb_bug44571.test: A test case for triggering the bug. rb://135 approved by Sunny Bains. ------------------------------------------------------------------------ r5704 | marko | 2009-08-27 04:31:17 -0400 (Thu, 27 Aug 2009) | 32 lines branches/zip: Fix a critical bug in fast index creation that could corrupt the created indexes. row_merge(): Make "half" an in/out parameter. Determine the offset of half the output file. Copy the last blocks record-by-record instead of block-by-block, so that the records can be counted. Check that the input and output have matching n_rec. row_merge_sort(): Do not assume that two blocks of size N are merged into a block of size 2*N. The output block can be shorter than the input if the last page of each input block is almost empty. Use an accurate termination condition, based on the "half" computed by row_merge(). row_merge_read(), row_merge_write(), row_merge_blocks(): Add debug output. merge_file_t, row_merge_file_create(): Add n_rec, the number of records in the merge file. row_merge_read_clustered_index(): Update n_rec. row_merge_blocks(): Update and check n_rec. row_merge_blocks_copy(): New function, for copying the last blocks in row_merge(). Update and check n_rec. This bug was discovered with a user-supplied test case that creates an index where the initial temporary file is 249 one-megabyte blocks and the merged files become smaller. In the test, possible merge record sizes are 10, 18, and 26 bytes. rb://150 approved by Sunny Bains. This addresses Issue #320. ------------------------------------------------------------------------ r5703 | marko | 2009-08-27 03:25:00 -0400 (Thu, 27 Aug 2009) | 41 lines branches/zip: Replace the constant 3/8 ratio that controls the LRU_old size with the settable global variable innodb_old_blocks_pct. The minimum and maximum values are 5 and 95 per cent, respectively. The default is 100*3/8, in line with the old behavior. ut_time_ms(): New utility function, to return the current time in milliseconds. TODO: Is there a more efficient timestamp function, such as rdtsc divided by a power of two? buf_LRU_old_threshold_ms: New variable, corresponding to innodb_old_blocks_time. The value 0 is the default behaviour: no timeout before making blocks 'new'. bpage->accessed, bpage->LRU_position, buf_pool->ulint_clock: Remove. bpage->access_time: New field, replacing bpage->accessed. Protected by buf_pool_mutex instead of bpage->mutex. Updated when a page is created or accessed the first time in the buffer pool. buf_LRU_old_ratio, innobase_old_blocks_pct: New variables, corresponding to innodb_old_blocks_pct buf_LRU_old_ratio_update(), innobase_old_blocks_pct_update(): Update functions for buf_LRU_old_ratio, innobase_old_blocks_pct. buf_page_peek_if_too_old(): Compare ut_time_ms() to bpage->access_time if buf_LRU_old_threshold_ms && bpage->old. Else observe buf_LRU_old_ratio and bpage->freed_page_clock. buf_pool_t: Add n_pages_made_young, n_pages_not_made_young, n_pages_made_young_old, n_pages_not_made_young, for statistics. buf_print(): Display buf_pool->n_pages_made_young, buf_pool->n_pages_not_made_young. This function is only for crash diagnostics. buf_print_io(): Display buf_pool->LRU_old_len and quantities derived from buf_pool->n_pages_made_young, buf_pool->n_pages_not_made_young. This function is invoked by SHOW ENGINE INNODB STATUS. rb://129 approved by Heikki Tuuri. This addresses Bug #45015. ------------------------------------------------------------------------ r5702 | marko | 2009-08-27 03:03:15 -0400 (Thu, 27 Aug 2009) | 1 line branches/zip: Document also the files affected by r5698 in the ChangeLog. ------------------------------------------------------------------------ r5701 | marko | 2009-08-27 03:01:42 -0400 (Thu, 27 Aug 2009) | 1 line branches/zip: Document r5698 in the ChangeLog. ------------------------------------------------------------------------ r5698 | inaam | 2009-08-26 10:34:35 -0400 (Wed, 26 Aug 2009) | 13 lines branches/zip bug#42885 rb://148 The call to put IO threads to sleep was most probably meant for Windows only as the comment in buf0rea.c suggests. However it was enabled on all platforms. This patch restricts the sleep call to windows. This approach of not putting threads to sleep makes even more sense because now we have multiple threads working in the background and it probably is not a good idea to put all of them to sleep because a user thread wants to post a batch for readahead. Approved by: Marko ------------------------------------------------------------------------ r5697 | vasil | 2009-08-26 09:44:40 -0400 (Wed, 26 Aug 2009) | 4 lines branches/zip: Fix typo. ------------------------------------------------------------------------ r5696 | vasil | 2009-08-26 09:15:59 -0400 (Wed, 26 Aug 2009) | 14 lines branches/zip: Merge a change from MySQL: http://lists.mysql.com/commits/80832 2968 Jonathan Perkin 2009-08-14 Build fixes for Windows, AIX, HP/UX and Sun Studio11, from Timothy Smith. modified: CMakeLists.txt cmd-line-utils/readline/util.c storage/innodb_plugin/handler/i_s.cc storage/innodb_plugin/include/univ.i ------------------------------------------------------------------------ r5695 | marko | 2009-08-26 09:14:59 -0400 (Wed, 26 Aug 2009) | 1 line branches/zip: UNIV_DEBUG_LOCK_VALIDATE: Move the definition to univ.i. ------------------------------------------------------------------------ r5694 | marko | 2009-08-26 07:25:26 -0400 (Wed, 26 Aug 2009) | 2 lines branches/zip: buf_page_t: Clarify that bpage->list may contain garbage. This comment was provoked by Inaam. ------------------------------------------------------------------------ r5687 | vasil | 2009-08-20 05:20:22 -0400 (Thu, 20 Aug 2009) | 8 lines branches/zip: ChangeLog: Follow the convention from the rest of the ChangeLog: for bugfixes from bugs.mysql.com only the bug number and title goes in the ChangeLog. Detailed explanation on what is the problem and how it was fixed is present in the bugs database. ------------------------------------------------------------------------ r5686 | vasil | 2009-08-20 05:15:05 -0400 (Thu, 20 Aug 2009) | 4 lines branches/zip: White-space fixup. ------------------------------------------------------------------------ r5685 | sunny | 2009-08-20 04:18:29 -0400 (Thu, 20 Aug 2009) | 2 lines branches/zip: Update the ChangeLog with r5684 change. ------------------------------------------------------------------------ r5684 | sunny | 2009-08-20 04:05:30 -0400 (Thu, 20 Aug 2009) | 10 lines branches/zip: Fix bug# 46650: Innodb assertion autoinc_lock == lock in lock_table_remove_low on INSERT SELECT We only store the autoinc locks that are granted in the transaction's autoinc lock vector. A transacton, that has been rolled back due to a deadlock because of an AUTOINC lock attempt, will not have added that lock to the vector. We need to check for that when we remove that lock. rb://145 Approved by Marko. ------------------------------------------------------------------------ r5681 | sunny | 2009-08-14 02:16:24 -0400 (Fri, 14 Aug 2009) | 3 lines branches/zip: When building HotBackup srv_use_sys_malloc is #ifdef out. We move access to the this variable within a !UNIV_HOTBACKUP block. ------------------------------------------------------------------------ r5671 | marko | 2009-08-13 04:46:33 -0400 (Thu, 13 Aug 2009) | 5 lines branches/zip: ha_innobase::add_index(): Fix Bug #46557: after a successful operation, read innodb_table->flags from the newly created table object, not from the old one that was just freed. Approved by Sunny. ------------------------------------------------------------------------ r5670 | marko | 2009-08-12 09:16:37 -0400 (Wed, 12 Aug 2009) | 2 lines branches/zip: trx_undo_rec_copy(): Add const qualifier to undo_rec. This is a non-functional change. ------------------------------------------------------------------------ r5663 | marko | 2009-08-11 07:42:37 -0400 (Tue, 11 Aug 2009) | 2 lines branches/zip: trx_general_rollback_for_mysql(): Remove the redundant parameter partial. If savept==NULL, partial==FALSE. ------------------------------------------------------------------------ r5662 | marko | 2009-08-11 05:54:16 -0400 (Tue, 11 Aug 2009) | 1 line branches/zip: Bump the version number to 1.0.5 after releasing 1.0.4. ------------------------------------------------------------------------ r5642 | calvin | 2009-08-06 19:04:03 -0400 (Thu, 06 Aug 2009) | 2 lines branches/zip: remove duplicate "the" in comments. ------------------------------------------------------------------------ r5639 | marko | 2009-08-06 06:39:34 -0400 (Thu, 06 Aug 2009) | 3 lines branches/zip: mem_heap_block_free(): If innodb_use_sys_malloc is set, do not tell Valgrind that the memory is free, to avoid a bogus warning in Valgrind's built-in free() hook. ------------------------------------------------------------------------ r5636 | marko | 2009-08-05 08:27:30 -0400 (Wed, 05 Aug 2009) | 2 lines branches/zip: lock_rec_validate_page(): Add the parameter zip_size. This should help track down Mantis Issue #289. ------------------------------------------------------------------------ r5635 | marko | 2009-08-05 07:06:55 -0400 (Wed, 05 Aug 2009) | 2 lines branches/zip: Replace <number> with NUMBER in some comments, to avoid problems with Doxygen XML output. ------------------------------------------------------------------------ r5629 | marko | 2009-08-04 07:42:44 -0400 (Tue, 04 Aug 2009) | 1 line branches/zip: mysql-test: Pass MTR's internal checks. ------------------------------------------------------------------------ r5626 | vasil | 2009-08-04 01:53:31 -0400 (Tue, 04 Aug 2009) | 4 lines branches/zip: Revert the dummy change from c5625. ------------------------------------------------------------------------ r5625 | vasil | 2009-08-04 01:52:48 -0400 (Tue, 04 Aug 2009) | 32 lines branches/zip: Merge 5518:5622 from branches/5.1, resolving conflict in r5622 (after resolving the conflict Makefile.am was not changed so I have made a dummy change so I can commit and thus record that branches/5.1 has been merged in branches/zip up to 5622): ------------------------------------------------------------------------ r5622 | vasil | 2009-08-03 15:27:00 +0300 (Mon, 03 Aug 2009) | 20 lines Changed paths: M /branches/5.1/Makefile.am branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2988 committer: Satya B <satya.bn@sun.com> branch nick: mysql-5.1-bugteam timestamp: Wed 2009-07-01 11:06:05 +0530 message: Fix build failure after applying Innodb snapshot 5.1-ss5282 After applying Innodb snapshot 5.1-ss5282, build was broken because of missing header file. Adding the header file to Makefile.am after informing the innodb developers. modified: storage/innobase/Makefile.am ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5614 | vasil | 2009-07-31 11:09:07 -0400 (Fri, 31 Jul 2009) | 6 lines branches/zip: Add fsp0types.h to the list of noinst_HEADERS Suggested by: Sergey Vojtovich <svoj@sun.com> ------------------------------------------------------------------------ r5539 | vasil | 2009-07-21 06:28:27 -0400 (Tue, 21 Jul 2009) | 4 lines branches/zip: Add a test program to check whether the PAUSE instruction is available. ------------------------------------------------------------------------ r5537 | vasil | 2009-07-21 05:31:26 -0400 (Tue, 21 Jul 2009) | 5 lines branches/zip: Fixups in ChangeLog: sort filenames alphabetically and wrap to 78 chars per line. ------------------------------------------------------------------------ r5527 | sunny | 2009-07-20 17:56:30 -0400 (Mon, 20 Jul 2009) | 2 lines branches/zip: For HotBackup builds we don't want to hide the symbols. ------------------------------------------------------------------------ r5525 | calvin | 2009-07-20 13:14:30 -0400 (Mon, 20 Jul 2009) | 2 lines branches/zip: add ChangeLog entry for r5524. ------------------------------------------------------------------------
-
- 31 Jul, 2009 1 commit
-
-
inaam authored
Refactor slot selection code in AIO interface. Pointed by: Sunny
-
- 21 Jul, 2009 1 commit
-
-
inaam authored
------------------------------------------------------------------------ r5147 | marko | 2009-05-27 06:55:14 -0400 (Wed, 27 May 2009) | 1 line branches/zip: ibuf0ibuf.c: Improve a comment. ------------------------------------------------------------------------ r5149 | marko | 2009-05-27 07:46:42 -0400 (Wed, 27 May 2009) | 34 lines branches/zip: Merge revisions 4994:5148 from branches/5.1: ------------------------------------------------------------------------ r5126 | vasil | 2009-05-26 16:57:12 +0300 (Tue, 26 May 2009) | 9 lines branches/5.1: Preparation for the fix of Bug#45097 Hang during recovery, redo logs for doublewrite buffer pages Non-functional change: move FSP_* macros from fsp0fsp.h to a new file fsp0types.h. This is needed in order to be able to use FSP_EXTENT_SIZE in mtr0log.ic. ------------------------------------------------------------------------ r5127 | vasil | 2009-05-26 17:05:43 +0300 (Tue, 26 May 2009) | 9 lines branches/5.1: Preparation for the fix of Bug#45097 Hang during recovery, redo logs for doublewrite buffer pages Do not include unnecessary headers mtr0log.h and fut0lst.h in trx0sys.h and include fsp0fsp.h just before it is needed. This is needed in order to be able to use TRX_SYS_SPACE in mtr0log.ic. ------------------------------------------------------------------------ r5128 | vasil | 2009-05-26 17:26:37 +0300 (Tue, 26 May 2009) | 7 lines branches/5.1: Fix Bug#45097 Hang during recovery, redo logs for doublewrite buffer pages Do not write redo log for the pages in the doublewrite buffer. Also, do not make a dummy change to the page because this is not needed. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5169 | marko | 2009-05-28 03:21:55 -0400 (Thu, 28 May 2009) | 1 line branches/zip: mtr0mtr.h: Add Doxygen comments for the redo log entry types. ------------------------------------------------------------------------ r5176 | marko | 2009-05-28 07:14:02 -0400 (Thu, 28 May 2009) | 1 line branches/zip: Correct a debug assertion that was added in r5125. ------------------------------------------------------------------------ r5201 | marko | 2009-06-01 06:35:25 -0400 (Mon, 01 Jun 2009) | 2 lines branches/zip: Clean up some comments. Make the rec parameter of mlog_open_and_write_index() const. ------------------------------------------------------------------------ r5234 | marko | 2009-06-03 08:26:41 -0400 (Wed, 03 Jun 2009) | 44 lines branches/zip: Merge revisions 5148:5233 from branches/5.1: ------------------------------------------------------------------------ r5150 | vasil | 2009-05-27 18:56:03 +0300 (Wed, 27 May 2009) | 4 lines branches/5.1: Whitespace fixup. ------------------------------------------------------------------------ r5191 | vasil | 2009-05-30 17:46:05 +0300 (Sat, 30 May 2009) | 19 lines branches/5.1: Merge a change from MySQL (this fixes the failing innodb_mysql test): ------------------------------------------------------------ revno: 1810.3894.10 committer: Sergey Glukhov <Sergey.Glukhov@sun.com> branch nick: mysql-5.0-bugteam timestamp: Tue 2009-05-19 11:32:21 +0500 message: Bug#39793 Foreign keys not constructed when column has a '#' in a comment or default value Internal InnoDN FK parser does not recognize '\'' as quotation symbol. Suggested fix is to add '\'' symbol check for quotation condition (dict_strip_comments() function). modified: innobase/dict/dict0dict.c mysql-test/r/innodb_mysql.result mysql-test/t/innodb_mysql.test ------------------------------------------------------------------------ r5233 | marko | 2009-06-03 15:12:44 +0300 (Wed, 03 Jun 2009) | 11 lines branches/5.1: Merge the test case from r5232 from branches/5.0: ------------------------------------------------------------------------ r5232 | marko | 2009-06-03 14:31:04 +0300 (Wed, 03 Jun 2009) | 21 lines branches/5.0: Merge r3590 from branches/5.1 in order to fix Bug #40565 (Update Query Results in "1 Row Affected" But Should Be "Zero Rows"). Also, add a test case for Bug #40565. rb://128 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5250 | marko | 2009-06-04 02:58:23 -0400 (Thu, 04 Jun 2009) | 1 line branches/zip: Add Doxygen comments to the rest of buf0*. ------------------------------------------------------------------------ r5251 | marko | 2009-06-04 02:59:51 -0400 (Thu, 04 Jun 2009) | 1 line branches/zip: Replace <= in a function comment. ------------------------------------------------------------------------ r5253 | marko | 2009-06-04 06:37:35 -0400 (Thu, 04 Jun 2009) | 1 line branches/zip: Add missing Doxygen comments for page0zip. ------------------------------------------------------------------------ r5261 | vasil | 2009-06-05 11:13:31 -0400 (Fri, 05 Jun 2009) | 15 lines branches/zip: Fix Mantis Issue#244 fix bug in linear read ahead (no check on access pattern) The changes are: 1) Take into account access pattern when deciding whether or not to do linear read ahead. 2) Expose a knob innodb_read_ahead_factor = [0-64] default (8), dynamic, global to control linear read ahead behvior 3) Disable random read ahead. Keep the code for now. Submitted by: Inaam (rb://122) Approved by: Heikki (rb://122) ------------------------------------------------------------------------ r5262 | vasil | 2009-06-05 12:04:25 -0400 (Fri, 05 Jun 2009) | 22 lines branches/zip: Enable functionality to have multiple background io helper threads. This patch is based on percona contributions. More details about this patch will be written at: https://svn.innodb.com/innobase/MultipleBackgroundThreads The patch essentially does the following: expose following knobs: innodb_read_io_threads = [1 - 64] default 1 innodb_write_io_threads = [1 - 64] default 1 deprecate innodb_file_io_threads (this parameter was relevant only on windows) Internally it allows multiple segments for read and write IO request arrays where one thread works on one segement. Submitted by: Inaam (rb://124) Approved by: Heikki (rb://124) ------------------------------------------------------------------------ r5263 | vasil | 2009-06-05 12:19:37 -0400 (Fri, 05 Jun 2009) | 4 lines branches/zip: Whitespace cleanup. ------------------------------------------------------------------------ r5264 | vasil | 2009-06-05 12:26:58 -0400 (Fri, 05 Jun 2009) | 4 lines branches/zip: Add ChangeLog entry for r5261. ------------------------------------------------------------------------ r5265 | vasil | 2009-06-05 12:34:11 -0400 (Fri, 05 Jun 2009) | 4 lines branches/zip: Add ChangeLog entry for r5262. ------------------------------------------------------------------------ r5268 | inaam | 2009-06-08 12:18:21 -0400 (Mon, 08 Jun 2009) | 7 lines branches/zip Non functional change: Added legal notices acknowledging percona contribution to the multiple IO helper threads patch i.e.: r5262 ------------------------------------------------------------------------ r5283 | inaam | 2009-06-09 13:46:29 -0400 (Tue, 09 Jun 2009) | 9 lines branches/zip rb://130 Enable Group Commit functionality that was broken in 5.0 when distributed transactions were introduced. Reviewed by: Heikki ------------------------------------------------------------------------ r5319 | marko | 2009-06-11 04:40:33 -0400 (Thu, 11 Jun 2009) | 3 lines branches/zip: Declare os_thread_id_t as unsigned long, because ulint is wrong on Win64. Pointed out by Vladislav Vaintroub <wlad@sun.com>. ------------------------------------------------------------------------ r5320 | inaam | 2009-06-11 09:15:41 -0400 (Thu, 11 Jun 2009) | 14 lines branches/zip rb://131 This patch changes the following defaults: max_dirty_pages_pct: default from 90 to 75. max allowed from 100 to 99 additional_mem_pool_size: default from 1 to 8 MB buffer_pool_size: default from 8 to 128 MB log_buffer_size: default from 1 to 8 MB read_io_threads/write_io_threads: default from 1 to 4 The log file sizes are untouched because of upgrade issues Reviewed by: Heikki ------------------------------------------------------------------------ r5330 | marko | 2009-06-16 04:08:59 -0400 (Tue, 16 Jun 2009) | 2 lines branches/zip: buf_page_get_gen(): Reduce mutex holding time by adjusting buf_pool->n_pend_unzip while only holding buf_pool_mutex. ------------------------------------------------------------------------ r5331 | marko | 2009-06-16 05:00:48 -0400 (Tue, 16 Jun 2009) | 2 lines branches/zip: buf_page_get_zip(): Eliminate a buf_page_get_mutex() call. The function must switch on the block state anyway. ------------------------------------------------------------------------ r5332 | vasil | 2009-06-16 05:03:27 -0400 (Tue, 16 Jun 2009) | 4 lines branches/zip: Add ChangeLog entries for r5283 and r5320. ------------------------------------------------------------------------ r5333 | marko | 2009-06-16 05:27:46 -0400 (Tue, 16 Jun 2009) | 1 line branches/zip: buf_page_io_query(): Remove unused function. ------------------------------------------------------------------------ r5335 | marko | 2009-06-16 09:23:10 -0400 (Tue, 16 Jun 2009) | 2 lines branches/zip: innodb.test: Adjust the tolerance of innodb_buffer_pool_pages_total for r5320. ------------------------------------------------------------------------ r5342 | marko | 2009-06-17 06:15:32 -0400 (Wed, 17 Jun 2009) | 60 lines branches/zip: Merge revisions 5233:5341 from branches/5.1: ------------------------------------------------------------------------ r5233 | marko | 2009-06-03 15:12:44 +0300 (Wed, 03 Jun 2009) | 11 lines branches/5.1: Merge the test case from r5232 from branches/5.0: ------------------------------------------------------------------------ r5232 | marko | 2009-06-03 14:31:04 +0300 (Wed, 03 Jun 2009) | 21 lines branches/5.0: Merge r3590 from branches/5.1 in order to fix Bug #40565 (Update Query Results in "1 Row Affected" But Should Be "Zero Rows"). Also, add a test case for Bug #40565. rb://128 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5243 | sunny | 2009-06-04 03:17:14 +0300 (Thu, 04 Jun 2009) | 14 lines branches/5.1: When the InnoDB and MySQL data dictionaries go out of sync, before the bug fix we would assert on missing autoinc columns. With this fix we allow MySQL to open the table but set the next autoinc value for the column to the MAX value. This effectively disables the next value generation. INSERTs will fail with a generic AUTOINC failure. However, the user should be able to read/dump the table, set the column values explicitly, use ALTER TABLE to set the next autoinc value and/or sync the two data dictionaries to resume normal operations. Fix Bug#44030 Error: (1500) Couldn't read the MAX(ID) autoinc value from the index (PRIMARY) rb://118 ------------------------------------------------------------------------ r5252 | sunny | 2009-06-04 10:16:24 +0300 (Thu, 04 Jun 2009) | 2 lines branches/5.1: The version of the result file checked in was broken in r5243. ------------------------------------------------------------------------ r5259 | vasil | 2009-06-05 10:29:16 +0300 (Fri, 05 Jun 2009) | 7 lines branches/5.1: Remove the word "Error" from the printout because the mysqltest suite interprets it as an error and thus the innodb-autoinc test fails. Approved by: Sunny (via IM) ------------------------------------------------------------------------ r5339 | marko | 2009-06-17 11:01:37 +0300 (Wed, 17 Jun 2009) | 2 lines branches/5.1: Add missing #include "mtr0log.h" so that the code compiles with -DUNIV_MUST_NOT_INLINE. (null merge; this had already been committed in branches/zip) ------------------------------------------------------------------------ r5340 | marko | 2009-06-17 12:11:49 +0300 (Wed, 17 Jun 2009) | 4 lines branches/5.1: row_unlock_for_mysql(): When the clustered index is unknown, refuse to unlock the record. (Bug #45357, caused by the fix of Bug #39320). rb://132 approved by Sunny Bains. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5343 | vasil | 2009-06-17 08:56:12 -0400 (Wed, 17 Jun 2009) | 4 lines branches/zip: Add ChangeLog entry for r5342. ------------------------------------------------------------------------ r5344 | marko | 2009-06-17 09:03:45 -0400 (Wed, 17 Jun 2009) | 1 line branches/zip: row_merge_read_rec(): Fix a UNIV_DEBUG bug (Bug #45426) ------------------------------------------------------------------------ r5391 | marko | 2009-06-22 05:31:35 -0400 (Mon, 22 Jun 2009) | 2 lines branches/zip: buf_page_get_zip(): Fix a bogus warning about block_mutex being possibly uninitialized. ------------------------------------------------------------------------ r5392 | marko | 2009-06-22 07:58:20 -0400 (Mon, 22 Jun 2009) | 4 lines branches/zip: ha_innobase::check_if_incompatible_data(): When ROW_FORMAT=DEFAULT, do not compare to get_row_type(). Without this change, fast index creation will be disabled in recent versions of MySQL 5.1. ------------------------------------------------------------------------ r5393 | pekka | 2009-06-22 09:27:55 -0400 (Mon, 22 Jun 2009) | 4 lines branches/zip: Minor changes for Hot Backup to build correctly. (The code bracketed between #ifdef UNIV_HOTBACKUP and #endif /* UNIV_HOTBACKUP */). This change should not affect !UNIV_HOTBACKUP build. ------------------------------------------------------------------------ r5394 | pekka | 2009-06-22 09:46:34 -0400 (Mon, 22 Jun 2009) | 4 lines branches/zip: Add functions for checking the format of tablespaces for Hot Backup build (UNIV_HOTBACKUP defined). This change should not affect !UNIV_HOTBACKUP build. ------------------------------------------------------------------------ r5397 | calvin | 2009-06-23 16:59:42 -0400 (Tue, 23 Jun 2009) | 7 lines branches/zip: change the header file path. Change the header file path from ../storage/innobase/include/ to ../include/. In the planned 5.1 + plugin release, the source directory of the plugin will not be in storage/innobase. Approved by: Heikki (IM) ------------------------------------------------------------------------ r5407 | calvin | 2009-06-24 09:51:08 -0400 (Wed, 24 Jun 2009) | 4 lines branches/zip: remove relative path of header files. Suggested by Marko. ------------------------------------------------------------------------ r5412 | marko | 2009-06-25 06:27:08 -0400 (Thu, 25 Jun 2009) | 1 line branches/zip: Replace a DBUG_ASSERT with ut_a to track down Issue #290. ------------------------------------------------------------------------ r5415 | marko | 2009-06-25 06:45:57 -0400 (Thu, 25 Jun 2009) | 3 lines branches/zip: dict_index_find_cols(): Print diagnostic on name mismatch. This addresses Bug #44571 but does not fix it. rb://135 approved by Sunny Bains. ------------------------------------------------------------------------ r5417 | marko | 2009-06-25 08:20:56 -0400 (Thu, 25 Jun 2009) | 1 line branches/zip: ha_innodb.cc: Move the misplaced Doxygen @file comment. ------------------------------------------------------------------------ r5418 | marko | 2009-06-25 08:55:52 -0400 (Thu, 25 Jun 2009) | 5 lines branches/zip: Fix a race condition caused by SET GLOBAL innodb_commit_concurrency=DEFAULT. (Bug #45749) When innodb_commit_concurrency is initially set nonzero, DEFAULT would change it back to 0, triggering Bug #42101. rb://139 approved by Heikki Tuuri. ------------------------------------------------------------------------ r5423 | calvin | 2009-06-26 16:52:52 -0400 (Fri, 26 Jun 2009) | 2 lines branches/zip: Fix typos. ------------------------------------------------------------------------ r5425 | marko | 2009-06-29 04:52:30 -0400 (Mon, 29 Jun 2009) | 4 lines branches/zip: ha_innobase::add_index(), ha_innobase::final_drop_index(): Start prebuilt->trx before locking the table. This should fix Issue #293 and could fix Issue #229. Approved by Sunny (over IM). ------------------------------------------------------------------------ r5426 | marko | 2009-06-29 05:24:27 -0400 (Mon, 29 Jun 2009) | 3 lines branches/zip: buf_page_get_gen(): Fix a race condition when reading buf_fix_count. This could explain Issue #156. Tested by Michael. ------------------------------------------------------------------------ r5427 | marko | 2009-06-29 05:54:53 -0400 (Mon, 29 Jun 2009) | 5 lines branches/zip: lock_print_info_all_transactions(), buf_read_recv_pages(): Tolerate missing tablespaces (zip_size==ULINT_UNDEFINED). buf_page_get_gen(): Add ut_ad(ut_is_2pow(zip_size)). Issue #289, rb://136 approved by Sunny Bains ------------------------------------------------------------------------ r5428 | marko | 2009-06-29 07:06:29 -0400 (Mon, 29 Jun 2009) | 2 lines branches/zip: row_sel_store_mysql_rec(): Add missing pointer cast. Do not do arithmetics on void pointers. ------------------------------------------------------------------------ r5429 | marko | 2009-06-29 09:49:54 -0400 (Mon, 29 Jun 2009) | 13 lines branches/zip: Do not crash on SET GLOBAL innodb_file_format=DEFAULT or SET GLOBAL innodb_file_format_check=DEFAULT. innodb_file_format.test: New test for innodb_file_format and innodb_file_format_check. innodb_file_format_name_validate(): Store the string in *save. innodb_file_format_name_update(): Check the string again. innodb_file_format_check_validate(): Store the string in *save. innodb_file_format_check_update(): Check the string again. Issue #282, rb://140 approved by Heikki Tuuri ------------------------------------------------------------------------ r5430 | marko | 2009-06-29 09:58:07 -0400 (Mon, 29 Jun 2009) | 2 lines branches/zip: lock_rec_validate_page(): Add another assertion to track down Issue #289. ------------------------------------------------------------------------ r5431 | marko | 2009-06-29 09:58:40 -0400 (Mon, 29 Jun 2009) | 1 line branches/zip: Revert an accidentally made change in r5430 to univ.i. ------------------------------------------------------------------------ r5437 | marko | 2009-06-30 05:10:01 -0400 (Tue, 30 Jun 2009) | 1 line branches/zip: ibuf_dummy_index_free(): Beautify the comment. ------------------------------------------------------------------------ r5438 | marko | 2009-06-30 05:10:32 -0400 (Tue, 30 Jun 2009) | 1 line branches/zip: fseg_free(): Remove this unused function. ------------------------------------------------------------------------ r5439 | marko | 2009-06-30 05:15:22 -0400 (Tue, 30 Jun 2009) | 2 lines branches/zip: fseg_validate(): Enclose in #ifdef UNIV_DEBUG. This function is unused, but it could turn out to be a useful debugging aid. ------------------------------------------------------------------------ r5441 | marko | 2009-06-30 06:30:14 -0400 (Tue, 30 Jun 2009) | 2 lines branches/zip: ha_delete(): Remove this unused function that was very similar to ha_search_and_delete_if_found(). ------------------------------------------------------------------------ r5442 | marko | 2009-06-30 06:45:41 -0400 (Tue, 30 Jun 2009) | 1 line branches/zip: lock_is_on_table(), lock_table_unlock(): Unused, remove. ------------------------------------------------------------------------ r5443 | marko | 2009-06-30 07:03:00 -0400 (Tue, 30 Jun 2009) | 1 line branches/zip: os_event_create_auto(): Unused, remove. ------------------------------------------------------------------------ r5444 | marko | 2009-06-30 07:19:49 -0400 (Tue, 30 Jun 2009) | 1 line branches/zip: que_graph_try_free(): Unused, remove. ------------------------------------------------------------------------ r5445 | marko | 2009-06-30 07:28:11 -0400 (Tue, 30 Jun 2009) | 1 line branches/zip: row_build_row_ref_from_row(): Unused, remove. ------------------------------------------------------------------------ r5446 | marko | 2009-06-30 07:35:45 -0400 (Tue, 30 Jun 2009) | 1 line branches/zip: srv_que_round_robin(), srv_que_task_enqueue(): Unused, remove. ------------------------------------------------------------------------ r5447 | marko | 2009-06-30 07:37:58 -0400 (Tue, 30 Jun 2009) | 1 line branches/zip: srv_que_task_queue_check(): Unused, remove. ------------------------------------------------------------------------ r5448 | marko | 2009-06-30 07:56:36 -0400 (Tue, 30 Jun 2009) | 1 line branches/zip: mem_heap_cat(): Unused, remove. ------------------------------------------------------------------------ r5449 | marko | 2009-06-30 08:00:50 -0400 (Tue, 30 Jun 2009) | 2 lines branches/zip: innobase_start_or_create_for_mysql(): Invoke os_get_os_version() at most once. ------------------------------------------------------------------------ r5450 | marko | 2009-06-30 08:02:20 -0400 (Tue, 30 Jun 2009) | 1 line branches/zip: os_file_close_no_error_handling(): Unused, remove. ------------------------------------------------------------------------ r5451 | marko | 2009-06-30 08:09:49 -0400 (Tue, 30 Jun 2009) | 2 lines branches/zip: page_set_max_trx_id(): Make the code compile with UNIV_HOTBACKUP. ------------------------------------------------------------------------ r5452 | marko | 2009-06-30 08:10:26 -0400 (Tue, 30 Jun 2009) | 2 lines branches/zip: os_file_close_no_error_handling(): Restore, as this function is used within InnoDB Hot Backup. ------------------------------------------------------------------------ r5453 | marko | 2009-06-30 08:14:01 -0400 (Tue, 30 Jun 2009) | 1 line branches/zip: os_process_set_priority_boost(): Unused, remove. ------------------------------------------------------------------------ r5454 | marko | 2009-06-30 08:42:52 -0400 (Tue, 30 Jun 2009) | 2 lines branches/zip: Replace a non-ASCII character (ISO 8859-1 encoded U+00AD SOFT HYPHEN) with a cheap ASCII substitute. ------------------------------------------------------------------------ r5456 | inaam | 2009-06-30 14:21:09 -0400 (Tue, 30 Jun 2009) | 4 lines branches/zip Non functional change. s/Percona/Percona Inc./ ------------------------------------------------------------------------ r5470 | vasil | 2009-07-02 09:12:36 -0400 (Thu, 02 Jul 2009) | 16 lines branches/zip: Use PAUSE instruction inside spinloop if it is available. The patch was originally developed by Mikael Ronstrom <mikael@mysql.com> and can be found here: http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2768 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2771 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2772 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2774 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2777 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2799 http://bazaar.launchpad.net/%7Emysql/mysql-server/mysql-5.4/revision/2800 Approved by: Heikki (rb://137) ------------------------------------------------------------------------ r5481 | vasil | 2009-07-06 13:16:32 -0400 (Mon, 06 Jul 2009) | 4 lines branches/zip: Remove unnecessary quotes and simplify plug.in. ------------------------------------------------------------------------ r5482 | calvin | 2009-07-06 18:36:35 -0400 (Mon, 06 Jul 2009) | 5 lines branches/zip: add COPYING files for Percona and Sun Micro. 1.0.4 contains patches based on contributions from Percona and Sun Microsystems. ------------------------------------------------------------------------ r5483 | calvin | 2009-07-07 05:36:43 -0400 (Tue, 07 Jul 2009) | 3 lines branches/zip: add IB_HAVE_PAUSE_INSTRUCTION to CMake. Windows will support PAUSE instruction by default. ------------------------------------------------------------------------ r5484 | inaam | 2009-07-07 18:57:14 -0400 (Tue, 07 Jul 2009) | 13 lines branches/zip rb://126 Based on contribution from Google Inc. This patch introduces a new parameter innodb_io_capacity to control the rate at which master threads performs various tasks. The default value is 200 and higher values imply more aggressive flushing and ibuf merges from within the master thread. This patch also changes the ibuf merge from synchronous to asynchronous. Another minor change is not to force the master thread to wait for a log flush to complete every second. Approved by: Heikki ------------------------------------------------------------------------ r5485 | inaam | 2009-07-07 19:00:49 -0400 (Tue, 07 Jul 2009) | 18 lines branches/zip rb://138 The current implementation is to try to flush the neighbors of every page that we flush. This patch makes the following distinction: 1) If the flush is from flush_list AND 2) If the flush is intended to move the oldest_modification LSN ahead (this happens when a user thread sees little space in the log file and attempts to flush pages from the buffer pool so that a checkpoint can be made) THEN Do not try to flush the neighbors. Just focus on flushing dirty pages at the end of flush_list Approved by: Heikki ------------------------------------------------------------------------ r5486 | inaam | 2009-07-08 12:11:40 -0400 (Wed, 08 Jul 2009) | 29 lines branches/zip rb://133 This patch introduces heuristics based flushing rate of dirty pages to avoid IO bursts at checkpoint. 1) log_capacity / log_generated per second gives us number of seconds in which ALL dirty pages need to be flushed. Based on this rough assumption we can say that n_dirty_pages / (log_capacity / log_generation_rate) = desired_flush_rate 2) We use weighted averages (hard coded to 20 seconds) of log_generation_rate to avoid resonance. 3) From the desired_flush_rate we subtract the number of pages that have been flushed due to LRU flushing. That gives us pages that we should flush as part of flush_list cleanup. And that is the number (capped by maximum io_capacity) that we try to flush from the master thread. Knobs: ====== innodb_adaptive_flushing: boolean, global, dynamic, default TRUE. Since this heuristic is very experimental and has the potential to dramatically change the IO pattern I think it is a good idea to leave a knob to turn it off. Approved by: Heikki ------------------------------------------------------------------------ r5487 | calvin | 2009-07-08 12:42:28 -0400 (Wed, 08 Jul 2009) | 7 lines branches/zip: fix PAUSE instruction patch on Windows The original PAUSE instruction patch (r5470) does not compile on Windows. Also, there is an elegant way of doing it on Windows - YieldProcessor(). Approved by: Heikki (on IM) ------------------------------------------------------------------------ r5489 | vasil | 2009-07-10 05:02:22 -0400 (Fri, 10 Jul 2009) | 9 lines branches/zip: Change the defaults for innodb_sync_spin_loops: 20 -> 30 innodb_spin_wait_delay: 5 -> 6 This change was proposed by Sun/MySQL based on their performance testing, see https://svn.innodb.com/innobase/Release_tasks_for_InnoDB_Plugin_V1.0.4 ------------------------------------------------------------------------ r5490 | vasil | 2009-07-10 05:04:20 -0400 (Fri, 10 Jul 2009) | 4 lines branches/zip: Add ChangeLog entry for 5489. ------------------------------------------------------------------------ r5491 | calvin | 2009-07-10 12:19:17 -0400 (Fri, 10 Jul 2009) | 6 lines branches/zip: add copyright info to files related to PAUSE instruction patch, contributed by Sun Microsystems. ------------------------------------------------------------------------ r5492 | calvin | 2009-07-10 17:47:34 -0400 (Fri, 10 Jul 2009) | 5 lines branches/zip: add ChangeLog entries for r5484-r5486. ------------------------------------------------------------------------ r5494 | vasil | 2009-07-13 03:37:35 -0400 (Mon, 13 Jul 2009) | 6 lines branches/zip: Restore the original value of innodb_sync_spin_loops at the end, previously the test assumed that setting it to 20 will do this, but now the default is 30 and MTR's internal check failed. ------------------------------------------------------------------------ r5495 | inaam | 2009-07-13 11:48:45 -0400 (Mon, 13 Jul 2009) | 5 lines branches/zip rb://138 (REVERT) Revert the flush neighbors patch as it shows regression in the benchmarks run by Michael. ------------------------------------------------------------------------ r5496 | inaam | 2009-07-13 14:04:57 -0400 (Mon, 13 Jul 2009) | 4 lines branches/zip Fixed warnings on windows where ulint != ib_uint64_t ------------------------------------------------------------------------ r5497 | calvin | 2009-07-13 15:01:00 -0400 (Mon, 13 Jul 2009) | 9 lines branches/zip: fix run-time symbols clash on Solaris. This patch is from Sergey Vojtovich of Sun Microsystems, to fix run-time symbols clash on Solaris with older C++ compiler: - when finding out a way to hide symbols, make decision basing on compiler, not operating system. - Sun Studio supports __hidden declaration specifier for this purpose. ------------------------------------------------------------------------ r5498 | vasil | 2009-07-14 03:16:18 -0400 (Tue, 14 Jul 2009) | 92 lines branches/zip: Merge r5341:5497 from branches/5.1, skipping: c5419 because it is merge from branches/zip into branches/5.1 c5466 because the source code has been adjusted to match the MySQL behavior and the innodb-autoinc test does not fail in branches/zip, if c5466 is merged, then innodb-autoinc starts failing, Sunny suggested not to merge c5466. and resolving conflicts in c5410, c5440, c5488: ------------------------------------------------------------------------ r5410 | marko | 2009-06-24 22:26:34 +0300 (Wed, 24 Jun 2009) | 2 lines Changed paths: M /branches/5.1/include/trx0sys.ic M /branches/5.1/trx/trx0purge.c M /branches/5.1/trx/trx0sys.c M /branches/5.1/trx/trx0undo.c branches/5.1: Add missing #include "mtr0log.h" to avoid warnings when compiling with -DUNIV_MUST_NOT_INLINE. ------------------------------------------------------------------------ r5419 | marko | 2009-06-25 16:11:57 +0300 (Thu, 25 Jun 2009) | 18 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb_bug42101-nonzero.result M /branches/5.1/mysql-test/innodb_bug42101-nonzero.test M /branches/5.1/mysql-test/innodb_bug42101.result M /branches/5.1/mysql-test/innodb_bug42101.test branches/5.1: Merge r5418 from branches/zip: ------------------------------------------------------------------------ r5418 | marko | 2009-06-25 15:55:52 +0300 (Thu, 25 Jun 2009) | 5 lines Changed paths: M /branches/zip/ChangeLog M /branches/zip/handler/ha_innodb.cc M /branches/zip/mysql-test/innodb_bug42101-nonzero.result M /branches/zip/mysql-test/innodb_bug42101-nonzero.test M /branches/zip/mysql-test/innodb_bug42101.result M /branches/zip/mysql-test/innodb_bug42101.test branches/zip: Fix a race condition caused by SET GLOBAL innodb_commit_concurrency=DEFAULT. (Bug #45749) When innodb_commit_concurrency is initially set nonzero, DEFAULT would change it back to 0, triggering Bug #42101. rb://139 approved by Heikki Tuuri. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5440 | vasil | 2009-06-30 13:04:29 +0300 (Tue, 30 Jun 2009) | 8 lines Changed paths: M /branches/5.1/fil/fil0fil.c branches/5.1: Fix Bug#45814 URL reference in InnoDB server errors needs adjusting to match documentation by changing the URL from http://dev.mysql.com/doc/refman/5.1/en/innodb-troubleshooting.html to http://dev.mysql.com/doc/refman/5.1/en/innodb-troubleshooting-datadict.html ------------------------------------------------------------------------ r5466 | vasil | 2009-07-02 10:46:45 +0300 (Thu, 02 Jul 2009) | 6 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Adjust the failing innodb-autoinc test to conform to the latest behavior of the MySQL code. The idea and the comment in innodb-autoinc.test come from Sunny. ------------------------------------------------------------------------ r5488 | vasil | 2009-07-09 19:16:44 +0300 (Thu, 09 Jul 2009) | 13 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc A /branches/5.1/mysql-test/innodb_bug21704.result A /branches/5.1/mysql-test/innodb_bug21704.test branches/5.1: Fix Bug#21704 Renaming column does not update FK definition by checking whether a column that participates in a FK definition is being renamed and denying the ALTER in this case. The patch was originally developed by Davi Arnaut <Davi.Arnaut@Sun.COM>: http://lists.mysql.com/commits/77714 and was later adjusted to conform to InnoDB coding style by me (Vasil), I also added some more comments and moved the bug specific mysql-test to a separate file to make it more manageable and flexible. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5499 | calvin | 2009-07-14 12:55:10 -0400 (Tue, 14 Jul 2009) | 3 lines branches/zip: add a missing file in Makefile.am This change was suggested by MySQL. ------------------------------------------------------------------------ r5500 | calvin | 2009-07-14 13:03:26 -0400 (Tue, 14 Jul 2009) | 3 lines branches/zip: minor change Remove an extra "with". ------------------------------------------------------------------------ r5501 | vasil | 2009-07-14 13:58:15 -0400 (Tue, 14 Jul 2009) | 5 lines branches/zip: Add @ZLIB_INCLUDES@ so that the InnoDB Plugin picks up the same zlib.h header file that is eventually used by mysqld. ------------------------------------------------------------------------ r5502 | vasil | 2009-07-14 13:59:59 -0400 (Tue, 14 Jul 2009) | 4 lines branches/zip: Add include/ut0auxconf.h to noinst_HEADERS ------------------------------------------------------------------------ r5503 | vasil | 2009-07-14 14:16:11 -0400 (Tue, 14 Jul 2009) | 8 lines branches/zip: Non-functional change: put files in noinst_HEADERS and libinnobase_a_SOURCES one per line and sort alphabetically, so it is easier to find if a file is there or not and also diffs show exactly the added or removed file instead of surrounding lines too. ------------------------------------------------------------------------ r5504 | calvin | 2009-07-15 04:58:44 -0400 (Wed, 15 Jul 2009) | 6 lines branches/zip: fix compile errors on Win64 Both srv_read_ahead_factor and srv_io_capacity should be defined as ulong. Approved by: Sunny ------------------------------------------------------------------------ r5508 | calvin | 2009-07-16 09:40:47 -0400 (Thu, 16 Jul 2009) | 16 lines branches/zip: Support inlining of functions and prefetch with Sun Studio Those changes are contributed by Sun/MySQL. Two sets of changes in this patch when Sun Studio is used: - Explicit inlining of functions - Prefetch Support This patch has been tested by Sunny with the plugin statically built in. Since we've never built the plugin as a dynamically loaded module on Solaris, it is a separate task to change plug.in. rb://142 Approved by: Heikki ------------------------------------------------------------------------ r5509 | calvin | 2009-07-16 09:45:28 -0400 (Thu, 16 Jul 2009) | 2 lines branches/zip: add ChangeLog entry for r5508. ------------------------------------------------------------------------ r5512 | sunny | 2009-07-19 19:52:48 -0400 (Sun, 19 Jul 2009) | 2 lines branches/zip: Remove unused extern ref to timed_mutexes. ------------------------------------------------------------------------ r5513 | sunny | 2009-07-19 19:58:43 -0400 (Sun, 19 Jul 2009) | 2 lines branches/zip: Undo r5512 ------------------------------------------------------------------------ r5514 | sunny | 2009-07-19 20:08:49 -0400 (Sun, 19 Jul 2009) | 2 lines branches/zip: Only use my_bool when UNIV_HOTBACKUP is not defined. ------------------------------------------------------------------------ r5515 | sunny | 2009-07-20 03:29:14 -0400 (Mon, 20 Jul 2009) | 2 lines branches/zip: The dict_table_t::autoinc_mutex field is not used in HotBackup. ------------------------------------------------------------------------ r5516 | sunny | 2009-07-20 03:46:05 -0400 (Mon, 20 Jul 2009) | 4 lines branches/zip: Make this file usable from within HotBackup. A new file has been introduced called hb_univ.i. This file should have all the HotBackup specific configuration. ------------------------------------------------------------------------ r5517 | sunny | 2009-07-20 03:55:11 -0400 (Mon, 20 Jul 2009) | 2 lines Add /* UNIV_HOTBACK */ ------------------------------------------------------------------------ r5519 | vasil | 2009-07-20 04:45:18 -0400 (Mon, 20 Jul 2009) | 31 lines branches/zip: Merge r5497:5518 from branches/5.1: ------------------------------------------------------------------------ r5518 | vasil | 2009-07-20 11:29:47 +0300 (Mon, 20 Jul 2009) | 22 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2874.2.1 committer: Anurag Shekhar <anurag.shekhar@sun.com> branch nick: mysql-5.1-bugteam-windows-warning timestamp: Wed 2009-05-13 15:41:24 +0530 message: Bug #39802 On Windows, 32-bit time_t should be enforced This patch fixes compilation warning, "conversion from 'time_t' to 'ulong', possible loss of data". The fix is to typecast time_t to ulong before assigning it to ulong. Backported this from 6.0-bugteam tree. modified: storage/archive/ha_archive.cc storage/federated/ha_federated.cc storage/innobase/handler/ha_innodb.cc storage/myisam/ha_myisam.cc ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5520 | vasil | 2009-07-20 04:51:47 -0400 (Mon, 20 Jul 2009) | 4 lines branches/zip: Add ChangeLog entries for r5498 and r5519. ------------------------------------------------------------------------ r5524 | inaam | 2009-07-20 12:23:15 -0400 (Mon, 20 Jul 2009) | 9 lines branches/zip Change the read ahead parameter name to innodb_read_ahead_threshold. Change the meaning of this parameter to signify the number of pages that must be sequentially accessed for InnoDB to trigger a readahead request. Suggested by: Ken ------------------------------------------------------------------------
-
- 27 May, 2009 1 commit
-
-
marko authored
------------------------------------------------------------------------ r5092 | marko | 2009-05-25 09:54:17 +0300 (Mon, 25 May 2009) | 1 line branches/zip: Adjust some function comments after r5091. ------------------------------------------------------------------------ r5100 | marko | 2009-05-25 12:09:45 +0300 (Mon, 25 May 2009) | 1 line branches/zip: Split some long lines that were introduced in r5091. ------------------------------------------------------------------------ r5101 | marko | 2009-05-25 12:42:47 +0300 (Mon, 25 May 2009) | 2 lines branches/zip: Introduce the macro TEMP_INDEX_PREFIX_STR. This is to avoid triggering an error in Doxygen. ------------------------------------------------------------------------ r5102 | marko | 2009-05-25 13:47:14 +0300 (Mon, 25 May 2009) | 1 line branches/zip: Add missing file comments. ------------------------------------------------------------------------ r5103 | marko | 2009-05-25 13:52:29 +0300 (Mon, 25 May 2009) | 10 lines branches/zip: Add @file comments, and convert decorative /********************************* comments to Doxygen /** style like this: /*****************************//** This conversion was performed by the following command: perl -i -e 'while(<ARGV>){if (m|^/\*{30}\**$|) { s|\*{4}$|//**| if ++$com>1; $_ .= "\@file $ARGV\n" if $com==2} print; if(eof){$.=0;undef $com}}' */*[ch] include/univ.i ------------------------------------------------------------------------ r5104 | marko | 2009-05-25 14:39:07 +0300 (Mon, 25 May 2009) | 2 lines branches/zip: Revert ut0auxconf_* to r5102, that is, make Doxygen ignore these test programs. ------------------------------------------------------------------------ r5105 | marko | 2009-05-25 14:52:20 +0300 (Mon, 25 May 2009) | 2 lines branches/zip: Enclose some #error checks inside #ifndef DOXYGEN to prevent bogus Doxygen errors. ------------------------------------------------------------------------ r5106 | marko | 2009-05-25 16:09:24 +0300 (Mon, 25 May 2009) | 2 lines branches/zip: Add some Doxygen comments, mainly to structs, typedefs, macros and global variables. Many more to go. ------------------------------------------------------------------------ r5108 | marko | 2009-05-26 00:32:35 +0300 (Tue, 26 May 2009) | 2 lines branches/zip: lexyy.c: Remove the inadvertently added @file directive. There is nothing for Doxygen to see in this file, move along. ------------------------------------------------------------------------ r5125 | marko | 2009-05-26 16:28:49 +0300 (Tue, 26 May 2009) | 3 lines branches/zip: Add some Doxygen comments for many structs, typedefs, #defines and global variables. Many are still missing. ------------------------------------------------------------------------ r5134 | marko | 2009-05-27 09:08:43 +0300 (Wed, 27 May 2009) | 1 line branches/zip: Add some Doxygen @return comments. ------------------------------------------------------------------------ r5139 | marko | 2009-05-27 10:01:40 +0300 (Wed, 27 May 2009) | 1 line branches/zip: Add Doxyfile. ------------------------------------------------------------------------ r5143 | marko | 2009-05-27 10:57:25 +0300 (Wed, 27 May 2009) | 3 lines branches/zip: buf0buf.h, Doxyfile: Fix the Doxygen translation. @defgroup is for source code modules, not for field groups. Tell Doxygen to expand the UT_LIST declarations. ------------------------------------------------------------------------
-
- 25 May, 2009 3 commits
-
-
marko authored
(Ran doxygenify.pl conversion locally, then merged and checked consistency.) ------------------------------------------------------------------------ r5091 | marko | 2009-05-25 09:30:14 +0300 (Mon, 25 May 2009) | 33 lines branches/zip: Convert the function comments to Doxygen format. This patch was created by running the following commands: for i in */*[ch]; do doxygenify.pl $i; done perl -i -pe 's#\*{3} \*/$#****/#' */*[ch] where doxygenify.pl is https://svn.innodb.com/svn/misc/trunk/tools/doxygenify.pl r510 Verified the consistency as follows: (0) not too many /* in: */ or /* out: */ comments left in the code: grep -l '/\*\s*\(in\|out\)[,:/]' */*[ch] (1) no difference when ignoring blank lines, after stripping all C90-style /* comments */, including multi-line ones, before and after applying this patch: perl -i -e 'undef $/;while(<ARGV>){s#/\*(.*?)\*/##gs;print}' */*[ch] diff -I'^\s*$' --exclude .svn -ru TREE1 TREE2 (2) after stripping @return comments and !<, generated a diff and omitted the hunks where /* out: */ function return comments were removed: perl -i -e'undef $/;while(<ARGV>){s#!<##g;s#\n\@return\t.*?\*/# \*/#gs;print}'\ */*[ch] svn diff| perl -e 'undef $/;$_=<>;s#\n-\s*/\* out[:,]([^\n]*?)(\n-[^\n]*?)*\*/##gs;print' Some unintended changes were left. These will be removed in a subsequent patch. ------------------------------------------------------------------------ -
marko authored
-
marko authored
------------------------------------------------------------------------ r4670 | vasil | 2009-04-07 09:35:23 +0300 (Tue, 07 Apr 2009) | 11 lines branches/zip: Fix Bug#43660 SHOW INDEXES/ANALYZE does NOT update cardinality for indexes of InnoDB table by replacing the pseudo random number generator with a better one (LCG). This also fixes Mantis Issue#212. Approved by: Heikki (rb://110) ------------------------------------------------------------------------ r4671 | vasil | 2009-04-07 09:37:31 +0300 (Tue, 07 Apr 2009) | 4 lines branches/zip: Add ChangeLog entry for r4670. ------------------------------------------------------------------------ r4673 | marko | 2009-04-07 15:45:28 +0300 (Tue, 07 Apr 2009) | 4 lines branches/zip: Allow in-place updates of UTF-8 CHAR columns from or to NULL in ROW_FORMAT=REDUNDANT. (Bug #44032) rb://107 approved by Heikki Tuuri. ------------------------------------------------------------------------ r4677 | marko | 2009-04-07 16:19:31 +0300 (Tue, 07 Apr 2009) | 1 line branches/zip: Adjust r4673 as in the merge to branches/6.0 -r4676. ------------------------------------------------------------------------ r4678 | inaam | 2009-04-07 18:45:37 +0300 (Tue, 07 Apr 2009) | 12 lines branches/zip Enable atomics on solaris (using the libc functions as defined in atomic.h) if GCC atomic builtins are not present. There still remains some work to be done (by Vasil?). This patch makes changes to plug.in to check pthread_t size and presence of atomic functions when running on solaris. The same has to become a part of the generated Makefile.in when we bake our source. Reviewed by: Heikki rb://106 ------------------------------------------------------------------------ r4687 | vasil | 2009-04-08 13:08:59 +0300 (Wed, 08 Apr 2009) | 4 lines branches/zip: Whitespace fixup in the ChangeLog ------------------------------------------------------------------------ r4688 | vasil | 2009-04-08 13:11:15 +0300 (Wed, 08 Apr 2009) | 4 lines branches/zip: Add ChangeLog entry for r4678. ------------------------------------------------------------------------ r4689 | marko | 2009-04-08 14:24:49 +0300 (Wed, 08 Apr 2009) | 5 lines branches/zip: Hide unnecessarily visible globals. dict_ind_redundant, dict_ind_compact: Declare these UNIV_INTERN. innodb_hton_ptr: Declare static. We do not attempt to access the built-in InnoDB any more. trx_roll_savepoints_free(): Declare UNIV_INTERN. ------------------------------------------------------------------------ r4700 | calvin | 2009-04-11 00:37:10 +0300 (Sat, 11 Apr 2009) | 9 lines branches/zip: Rewrite CMakeLists.txt CMakeLists.txt is completely rewritten: - To replace the one written by mysql - Print out some useful information, such as system name, directory, generator used, win64, Microsoft compiler, etc. - Remove one workaround for mysqld.lib location. User does not need to specify a build type ------------------------------------------------------------------------ r4702 | calvin | 2009-04-13 18:16:44 +0300 (Mon, 13 Apr 2009) | 3 lines branches/zip: delete the original CMakeLists.txt A new version will be committed, suggested by Ken. ------------------------------------------------------------------------ r4703 | calvin | 2009-04-13 18:20:45 +0300 (Mon, 13 Apr 2009) | 9 lines branches/zip: new CMakeLists.txt CMakeLists.txt is completely rewritten with enhancements: - Print out useful information, such as system name, directory, generator used, win64, Microsoft compiler, etc. - Remove one workaround for mysqld.lib location. User does not need to specify a build type when invoking MSVC generator. ------------------------------------------------------------------------ r4706 | vasil | 2009-04-14 14:32:11 +0300 (Tue, 14 Apr 2009) | 5 lines branches/zip: When using the random function, first take the modulus by the number of pages and then typecast to ulint. ------------------------------------------------------------------------ r4707 | calvin | 2009-04-14 17:47:31 +0300 (Tue, 14 Apr 2009) | 13 lines branches/zip: remove statically linked libraries from mysql To make zlib and strings dynamically linked; mysqld will export additional functions required by InnoDB. Since the symbols will be resolved dynamically during runtime, wdl_load_mapfile() is no longer able to make any function calls to ones in mysqld. As the result, strtoull() (from strings.lib) is replaced with _strtoui64(). rb://111 Approved by: Marko ------------------------------------------------------------------------ r4712 | vasil | 2009-04-15 12:26:32 +0300 (Wed, 15 Apr 2009) | 157 lines branches/zip: Merge revisions 4481:4710 from branches/5.1: (resolving conflict in r4574, r4575 and skipping r4699 and r4705 because analogous changes to r4699 and r4705 were already made to branches/zip) ------------------------------------------------------------------------ r4573 | vasil | 2009-03-30 14:17:13 +0300 (Mon, 30 Mar 2009) | 4 lines Changed paths: M /branches/5.1/mysql-test/innodb.test branches/5.1: Fix email address from dev@innodb.com to innodb_dev_ww@oracle.com ------------------------------------------------------------------------ r4574 | vasil | 2009-03-30 14:27:08 +0300 (Mon, 30 Mar 2009) | 38 lines Changed paths: M /branches/5.1/Makefile.am M /branches/5.1/mysql-test/innodb.test branches/5.1: Restore the state of INNODB_THREAD_CONCURRENCY to silence this warning: TEST RESULT TIME (ms) ------------------------------------------------------------ worker[1] Using MTR_BUILD_THREAD 250, with reserved ports 12500..12509 main.innodb [ pass ] 8803 MTR's internal check of the test case 'main.innodb' failed. This means that the test case does not preserve the state that existed before the test case was executed. Most likely the test case did not do a proper clean-up. This is the diff of the states of the servers before and after the test case was executed: mysqltest: Logging to '/tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.log'. mysqltest: Results saved in '/tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result'. mysqltest: Connecting to server localhost:12500 (socket /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/mysqld.1.sock) as 'root', connection 'default', attempt 0 ... mysqltest: ... Connected. mysqltest: Start processing test commands from './include/check-testcase.test' ... mysqltest: ... Done processing test commands. --- /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result 2009-03-30 14:12:31.000000000 +0300 +++ /tmp/autotest.sh-20090330_033000-5.1.5Hg8CY/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.reject 2009-03-30 14:12:41.000000000 +0300 @@ -99,7 +99,7 @@ INNODB_SUPPORT_XA ON INNODB_SYNC_SPIN_LOOPS 20 INNODB_TABLE_LOCKS ON -INNODB_THREAD_CONCURRENCY 8 +INNODB_THREAD_CONCURRENCY 16 INNODB_THREAD_SLEEP_DELAY 10000 INSERT_ID 0 INTERACTIVE_TIMEOUT 28800 mysqltest: Result content mismatch not ok ------------------------------------------------------------------------ r4575 | vasil | 2009-03-30 15:55:31 +0300 (Mon, 30 Mar 2009) | 8 lines Changed paths: M /branches/5.1/mysql-test/innodb.result M /branches/5.1/mysql-test/innodb.test branches/5.1: Fix Bug#43309 Test main.innodb can't be run twice Make the innodb mysql-test more flexible by inspecting how much a variable of interest has changed since the start of the test. Do not assume the variables have zero values at the start of the test. ------------------------------------------------------------------------ r4576 | vasil | 2009-03-30 16:25:10 +0300 (Mon, 30 Mar 2009) | 4 lines Changed paths: M /branches/5.1/Makefile.am branches/5.1: Revert a change to Makefile.am that I committed accidentally in c4574. ------------------------------------------------------------------------ r4659 | vasil | 2009-04-06 15:34:51 +0300 (Mon, 06 Apr 2009) | 6 lines Changed paths: M /branches/5.1/mysql-test/innodb.test branches/5.1: Followup to r4575 and the fix of Bug#43309 Test main.innodb can't be run twice: Add an explanatory comment, as suggested by Patrick Crews in the bug report. ------------------------------------------------------------------------ r4699 | vasil | 2009-04-09 14:01:52 +0300 (Thu, 09 Apr 2009) | 15 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/srv0srv.h M /branches/5.1/page/page0cur.c M /branches/5.1/srv/srv0srv.c branches/5.1: Fix Bug#43660 SHOW INDEXES/ANALYZE does NOT update cardinality for indexes of InnoDB table by replacing the PRNG that is used to pick random pages with a better one. This is based on r4670 but also adds a new configuration option and enables the fix only if this option is changed. Please skip the present revision when merging. Approved by: Heikki (via email) ------------------------------------------------------------------------ r4705 | vasil | 2009-04-14 14:30:13 +0300 (Tue, 14 Apr 2009) | 5 lines Changed paths: M /branches/5.1/page/page0cur.c branches/5.1: When using the random function, first take the modulus by the number of pages and then typecast to ulint. ------------------------------------------------------------------------ r4710 | vasil | 2009-04-15 11:55:18 +0300 (Wed, 15 Apr 2009) | 25 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Merge a change from MySQL (looks like this is against 5.0 but they later merged it to 5.1): ------------------------------------------------------------ revno: 1810.3846.1 committer: Alexey Botchkov <holyfoot@mysql.com> branch nick: 31435 timestamp: Tue 2008-11-11 14:42:32 +0400 message: Bug#31435 ha_innodb.cc:3983: ulint convert_search_mode_to_innobase(ha_rkey_function): Asse I think we don't need to issue an error statement in the convert_search_mode_to_innobase(). Returning the PAGE_CUR_UNSUPP value is enough as allows to handle this case depending on the requirements. per-file comments: sql/ha_innodb.cc Bug#31435 ha_innodb.cc:3983: ulint convert_search_mode_to_innobase(ha_rkey_function): Asse no error issued in convert_search_mode_to_innobase. ha_innobase::records_in_range() returns HA_POS_ERROR if search mode isn't supported. modified: sql/ha_innodb.cc ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4713 | vasil | 2009-04-15 12:36:16 +0300 (Wed, 15 Apr 2009) | 4 lines branches/zip: Add missing ChangeLog entries ------------------------------------------------------------------------ r4714 | vasil | 2009-04-15 12:36:57 +0300 (Wed, 15 Apr 2009) | 4 lines branches/zip: Fix typo in the ChangeLog ------------------------------------------------------------------------ r4715 | vasil | 2009-04-15 12:39:04 +0300 (Wed, 15 Apr 2009) | 4 lines branches/zip: Whitespace cleanup in ChangeLog ------------------------------------------------------------------------ r4716 | vasil | 2009-04-15 21:36:06 +0300 (Wed, 15 Apr 2009) | 4 lines branches/zip: Add ChangeLog entry for r4543. ------------------------------------------------------------------------ r4717 | calvin | 2009-04-16 01:22:35 +0300 (Thu, 16 Apr 2009) | 18 lines branches/zip: Use the Windows Interlocked functions for atomic memory access Mapping the atomic operations to Windows Interlocked functions: os_compare_and_swap_* to InterlockedCompareExchange(64) os_atomic_increment_* to InterlockedExchangeAdd(64) os_atomic_test_and_set_byte to InterlockedExchange In this patch, the legacy code under UNIV_CAN_USE_X86_ASSEMBLER is removed all together, and add HAVE_WINDOWS_ATOMICS and INNODB_RW_LOCKS_USE_ATOMICS to CMakeLists.txt This is to address mantis issue#194. rb://113 Approved by: Marko ------------------------------------------------------------------------ r4720 | vasil | 2009-04-16 09:44:48 +0300 (Thu, 16 Apr 2009) | 4 lines branches/zip: Add ChangeLog entry for r4717. ------------------------------------------------------------------------ r4721 | marko | 2009-04-16 10:32:09 +0300 (Thu, 16 Apr 2009) | 2 lines branches/zip: row_scan_and_check_index(): Initialize prebuilt->index_usable. This should have been done in r4631. Spotted by Michael. ------------------------------------------------------------------------ r4728 | marko | 2009-04-16 16:02:27 +0300 (Thu, 16 Apr 2009) | 3 lines branches/zip: univ.i: Define REFMAN as the base URL of the MySQL Reference Manual and use it in every string. This fixes Issue #221. ------------------------------------------------------------------------ r4733 | calvin | 2009-04-17 08:13:20 +0300 (Fri, 17 Apr 2009) | 6 lines branches/zip: minor changes to CMakeLists.txt All are non-functional changes: - should check for long (not int), spotted by Sunny - comment out the project definition, avoiding to generate another .sln file. ------------------------------------------------------------------------ r4748 | vasil | 2009-04-18 00:50:09 +0300 (Sat, 18 Apr 2009) | 118 lines branches/zip: Merge revisions 4710:4746 from branches/5.1: ------------------------------------------------------------------------ r4746 | vasil | 2009-04-18 00:32:08 +0300 (Sat, 18 Apr 2009) | 110 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/include/pars0pars.h branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2728.10.2 committer: Ignacio Galarza <iggy@mysql.com> branch nick: mysql-5.1-bugteam-bug29125 timestamp: Fri 2009-02-13 11:41:47 -0500 message: Bug#29125 Windows Server X64: so many compiler warnings - Remove bothersome warning messages. This change focuses on the warnings that are covered by the ignore file: support-files/compiler_warnings.supp. - Strings are guaranteed to be max uint in length modified: client/mysql_upgrade.c client/mysqladmin.cc client/mysqlbinlog.cc client/mysqlcheck.c client/mysqldump.c client/mysqlslap.c client/mysqltest.cc client/sql_string.cc extra/comp_err.c extra/yassl/src/buffer.cpp extra/yassl/taocrypt/include/block.hpp extra/yassl/taocrypt/src/algebra.cpp extra/yassl/taocrypt/src/asn.cpp include/config-win.h libmysql/libmysql.c mysys/array.c mysys/base64.c mysys/charset.c mysys/checksum.c mysys/default.c mysys/default_modify.c mysys/hash.c mysys/mf_keycache.c mysys/mf_tempdir.c mysys/my_append.c mysys/my_compress.c mysys/my_conio.c mysys/my_copy.c mysys/my_getwd.c mysys/my_pread.c mysys/my_quick.c mysys/my_read.c mysys/safemalloc.c mysys/string.c server-tools/instance-manager/buffer.cc server-tools/instance-manager/instance.cc server-tools/instance-manager/options.cc server-tools/instance-manager/parse.h sql-common/client.c sql-common/my_user.c sql/event_data_objects.cc sql/event_parse_data.cc sql/events.cc sql/gen_lex_hash.cc sql/item.h sql/item_func.cc sql/item_strfunc.cc sql/item_timefunc.cc sql/lock.cc sql/log_event.cc sql/log_event.h sql/log_event_old.cc sql/net_serv.cc sql/sp_head.h sql/spatial.h sql/sql_class.h sql/sql_connect.cc sql/sql_crypt.cc sql/sql_error.cc sql/sql_insert.cc sql/sql_lex.cc sql/sql_lex.h sql/sql_load.cc sql/sql_prepare.cc sql/sql_profile.cc sql/sql_repl.cc sql/sql_servers.cc sql/sql_string.cc sql/sql_table.cc sql/sql_trigger.cc sql/sql_udf.cc sql/sql_view.cc sql/udf_example.c sql/uniques.cc storage/archive/azio.c storage/archive/azlib.h storage/csv/ha_tina.cc storage/csv/ha_tina.h storage/csv/transparent_file.h storage/federated/ha_federated.cc storage/federated/ha_federated.h storage/heap/hp_write.c storage/innobase/handler/ha_innodb.cc storage/innobase/include/pars0pars.h storage/myisam/ha_myisam.cc storage/myisam/mi_check.c storage/myisam/mi_packrec.c storage/myisam/mi_search.c storage/myisam/rt_index.c storage/myisammrg/ha_myisammrg.cc strings/ctype.c strings/my_vsnprintf.c tests/bug25714.c tests/mysql_client_test.c ------------------------------------------------------------------------ r4749 | vasil | 2009-04-18 00:58:08 +0300 (Sat, 18 Apr 2009) | 4 lines branches/zip: Add ChangeLog entry for t4748. ------------------------------------------------------------------------ r4751 | vasil | 2009-04-18 01:29:16 +0300 (Sat, 18 Apr 2009) | 4 lines branches/zip: Silence warning about unused variables. ------------------------------------------------------------------------ r4752 | vasil | 2009-04-18 01:30:37 +0300 (Sat, 18 Apr 2009) | 4 lines branches/zip: Include the needed header for memset(). ------------------------------------------------------------------------ r4753 | vasil | 2009-04-18 01:31:34 +0300 (Sat, 18 Apr 2009) | 4 lines branches/zip: Silence a compiler warning. ------------------------------------------------------------------------ r4756 | vasil | 2009-04-18 02:19:03 +0300 (Sat, 18 Apr 2009) | 5 lines branches/zip: Rename the aux config program and give it a more specific name because more are coming. ------------------------------------------------------------------------ r4757 | vasil | 2009-04-18 02:22:33 +0300 (Sat, 18 Apr 2009) | 4 lines branches/zip: Add comment and copyright notice to the aux config program. ------------------------------------------------------------------------ r4758 | vasil | 2009-04-18 02:40:47 +0300 (Sat, 18 Apr 2009) | 5 lines branches/zip: Add aux config programs to emulate the newly added checks in plug.in (from r4678). ------------------------------------------------------------------------ r4830 | marko | 2009-04-20 16:11:38 +0300 (Mon, 20 Apr 2009) | 6 lines branches/zip: Cosmetic fixes. row_unlock_for_mysql(): Add a const qualifier to read-only rec_t*. Use dict_index_is_clust(). CMakeLists.txt: svn propset svn:eol-style native. ------------------------------------------------------------------------ r4893 | marko | 2009-04-23 09:32:36 +0300 (Thu, 23 Apr 2009) | 11 lines branches/zip: Introduce the logical type names trx_id_t, roll_ptr_t, and undo_no_t. Each type is still defined as dulint. This is an initial step towards replacing dulint with a 64-bit data type. Because modern compilers have no trouble supporting 64-bit arithmetics even on 32-bit targets, the dulint struct is a relic that should go. The last remaining major use of dulint is dictionary IDs (table, index, and row ids). rb://114 approved by Sunny Bains ------------------------------------------------------------------------ r4894 | marko | 2009-04-23 10:21:07 +0300 (Thu, 23 Apr 2009) | 1 line branches/zip: ChangeLog: Document r4893. ------------------------------------------------------------------------ r4895 | marko | 2009-04-23 10:22:06 +0300 (Thu, 23 Apr 2009) | 1 line branches/zip: ChangeLog: Add the missing include/ to two files. ------------------------------------------------------------------------ r4896 | marko | 2009-04-23 10:37:40 +0300 (Thu, 23 Apr 2009) | 4 lines branches/zip: row_scan_and_check_index(): Improve the diagnostics, by reporting errors from row_search_for_mysql() in the error log. The errors will still be ignored by CHECK TABLE. This is somewhat related to Issue #211. ------------------------------------------------------------------------ r4897 | marko | 2009-04-23 10:40:34 +0300 (Thu, 23 Apr 2009) | 2 lines branches/zip: row_scan_and_check_index(): Check row_merge_is_index_usable() earlier, to make the logic clearer. ------------------------------------------------------------------------ r4898 | marko | 2009-04-23 15:15:07 +0300 (Thu, 23 Apr 2009) | 4 lines branches/zip: Correct a misleading comment. PAGE_MAX_TRX_ID will be updated in ibuf_insert_low() and updated from the insert buffer tree page to the secondary index tree page during the insert buffer merge. ------------------------------------------------------------------------ r4915 | marko | 2009-04-27 13:40:20 +0300 (Mon, 27 Apr 2009) | 2 lines branches/zip: row_scan_and_check_index(): Add some comments on prebuilt->index_usable, as suggested by Michael. ------------------------------------------------------------------------ r4921 | marko | 2009-04-29 11:51:25 +0300 (Wed, 29 Apr 2009) | 2 lines branches/zip: btr_cur_optimistic_insert(): Remove a redundant condition. The insert buffer tree is a clustered index. ------------------------------------------------------------------------ r4922 | marko | 2009-04-29 23:23:27 +0300 (Wed, 29 Apr 2009) | 22 lines branches/zip: Distinguish temporary tables in MLOG_FILE_CREATE. This addresses Mantis Issue #23 in InnoDB Hot Backup and some of MySQL Bug #41609. In MLOG_FILE_CREATE, we need to distinguish temporary tables, so that InnoDB Hot Backup can work correctly. It turns out that we can do this easily, by using a bit of the previously unused parameter for page number. (The page number parameter of MLOG_FILE_CREATE has been written as 0 ever since MySQL 4.1, which introduced MLOG_FILE_CREATE.) MLOG_FILE_FLAG_TEMP: A flag for indicating a temporary table in the page number parameter of MLOG_FILE_ operations. fil_op_write_log(): Add the parameter log_flags. fil_op_log_parse_or_replay(): Add the parameter log_flags. Do not replay MLOG_FILE_CREATE when MLOG_FILE_FLAG_TEMP is set in log_flags. This only affects ibbackup --apply-log. InnoDB itself never replays file operations. rb://117 approved by Heikki Tuuri ------------------------------------------------------------------------ r4977 | marko | 2009-05-13 15:49:38 +0300 (Wed, 13 May 2009) | 12 lines branches/zip: Merge revisions 4746:4976 from branches/5.1: ------------------------------------------------------------------------ r4976 | marko | 2009-05-13 15:44:54 +0300 (Wed, 13 May 2009) | 6 lines branches/5.1: Display DB_ROLL_PTR in the COLUMNS section of the innodb_table_monitor output. It was accidentally omitted due to an off-by-one loop condition. (Bug #44320) rb://116 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4978 | vasil | 2009-05-13 16:21:55 +0300 (Wed, 13 May 2009) | 4 lines branches/zip: Add ChangeLog entry for r4977. ------------------------------------------------------------------------ r4995 | marko | 2009-05-14 15:31:43 +0300 (Thu, 14 May 2009) | 24 lines branches/zip: Merge revisions 4976:4994 from branches/5.1: ------------------------------------------------------------------------ r4994 | marko | 2009-05-14 15:04:55 +0300 (Thu, 14 May 2009) | 18 lines branches/5.1: Prevent a race condition in innobase_commit() by ensuring that innodb_commit_concurrency>0 remains constant at run time. (Bug #42101) srv_commit_concurrency: Make this a static variable in ha_innodb.cc. innobase_commit_concurrency_validate(): Check that innodb_commit_concurrency is not changed from or to 0 at run time. This is needed, because innobase_commit() assumes that innodb_commit_concurrency>0 remains constant. Without this limitation, the checks for innodb_commit_concurrency>0 in innobase_commit() should be removed and that function would have to acquire and release commit_cond_m at least twice per invocation. Normally, innodb_commit_concurrency=0, and introducing the mutex operations would mean significant overhead. innodb_bug42101.test, innodb_bug42101-nonzero.test: Test cases. rb://123 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ r5000 | vasil | 2009-05-14 20:13:41 +0300 (Thu, 14 May 2009) | 4 lines branches/zip: Add ChangeLog entry for r4994. ------------------------------------------------------------------------ r5026 | marko | 2009-05-18 16:29:51 +0300 (Mon, 18 May 2009) | 1 line branches/zip: buf_validate(): Add missing out: comment. ------------------------------------------------------------------------ r5027 | marko | 2009-05-18 16:36:10 +0300 (Mon, 18 May 2009) | 1 line branches/zip: Add some missing out: comments to buf0buf.h, buf0buf.c. ------------------------------------------------------------------------ r5028 | marko | 2009-05-18 16:40:07 +0300 (Mon, 18 May 2009) | 11 lines branches/zip: When executing an optimistic update by delete-and-insert, correctly estimate the free space on the compressed page by page_zip_available(..., create=TRUE). This was reported as Issue #231. btr_cur_update_alloc_zip(): Add the parameter ibool create and pass it to page_zip_available(). The parameter was previously passed as 0. btr_cur_optimistic_update(): Pass create=TRUE to btr_cur_update_alloc_zip(). rb://120 approved by Heikki Tuuri ------------------------------------------------------------------------ r5030 | marko | 2009-05-19 10:04:04 +0300 (Tue, 19 May 2009) | 2 lines branches/zip: os_thread_get_curr_id(), os_thread_get_curr(): Add missing out: comments. ------------------------------------------------------------------------ r5031 | marko | 2009-05-19 10:30:02 +0300 (Tue, 19 May 2009) | 1 line branches/zip: Add missing out: comments to nullary functions. ------------------------------------------------------------------------ r5033 | marko | 2009-05-19 11:00:51 +0300 (Tue, 19 May 2009) | 1 line branches/zip: Remove bogus out: comments of functions returning void. ------------------------------------------------------------------------ r5034 | marko | 2009-05-19 12:41:32 +0300 (Tue, 19 May 2009) | 1 line branches/zip: row_update_prebuilt_trx(): Correct bogus comment. ------------------------------------------------------------------------ r5035 | marko | 2009-05-19 13:04:58 +0300 (Tue, 19 May 2009) | 3 lines branches/zip: ut0auxconf_have_solaris_atomics.c: Get the function declarations from <atomic.h>. Call the functions with proper arguments. ------------------------------------------------------------------------ r5036 | marko | 2009-05-19 13:05:50 +0300 (Tue, 19 May 2009) | 1 line branches/zip: Add proper comments to some file page accessors. ------------------------------------------------------------------------ r5037 | marko | 2009-05-19 13:08:16 +0300 (Tue, 19 May 2009) | 1 line branches/zip: Fix a typo that was introduced in r5036. ------------------------------------------------------------------------ r5038 | marko | 2009-05-19 22:59:07 +0300 (Tue, 19 May 2009) | 30 lines branches/zip: Write PAGE_MAX_TRX_ID to the redo log. Otherwise, transactions that are started before the rollback of incomplete transactions has finished may have an inconsistent view of the secondary indexes. dict_index_is_sec_or_ibuf(): Auxiliary function for controlling updates and checks of PAGE_MAX_TRX_ID: check whether an index is a secondary index or the insert buffer tree. page_set_max_trx_id(), page_update_max_trx_id(), lock_rec_insert_check_and_lock(), lock_sec_rec_modify_check_and_lock(), btr_cur_ins_lock_and_undo(), btr_cur_upd_lock_and_undo(): Add the parameter mtr. page_set_max_trx_id(): Allow mtr to be NULL. When mtr==NULL, do not attempt to write to the redo log. This only occurs when creating a page or reorganizing a compressed page. In these cases, the PAGE_MAX_TRX_ID will be set correctly during the application of redo log records, even though there is no explicit log record about it. btr_discard_only_page_on_level(): Preserve PAGE_MAX_TRX_ID. This function should be unreachable, though. btr_cur_pessimistic_update(): Update PAGE_MAX_TRX_ID. Add some assertions for checking that PAGE_MAX_TRX_ID is set on all secondary index leaf pages. rb://115 tested by Michael, fixes Issue #211 ------------------------------------------------------------------------ r5039 | marko | 2009-05-19 23:13:12 +0300 (Tue, 19 May 2009) | 1 line branches/zip: ib_wqueue_wait(): Add decorative comment. ------------------------------------------------------------------------ r5041 | marko | 2009-05-20 08:42:12 +0300 (Wed, 20 May 2009) | 1 line branches/zip: Add missing function comments. ------------------------------------------------------------------------ r5042 | marko | 2009-05-20 08:46:01 +0300 (Wed, 20 May 2009) | 1 line branches/zip: sync0rw.ic: Remove an extra ; that was added in r5041. ------------------------------------------------------------------------ r5044 | marko | 2009-05-20 11:11:58 +0300 (Wed, 20 May 2009) | 2 lines branches/zip: mlog_parse_index(): Correct a parameter comment and add a const qualifier that was missing. ------------------------------------------------------------------------ r5045 | marko | 2009-05-20 11:37:08 +0300 (Wed, 20 May 2009) | 1 line branches/zip: fil0fil.c: Correct some comments. ------------------------------------------------------------------------ r5046 | marko | 2009-05-20 12:19:40 +0300 (Wed, 20 May 2009) | 1 line branches/zip: Fix some function comments. ------------------------------------------------------------------------ r5047 | marko | 2009-05-20 12:26:49 +0300 (Wed, 20 May 2009) | 1 line branches/zip: ut_snprintf(): Fix the function comments. ------------------------------------------------------------------------ r5048 | marko | 2009-05-20 12:28:44 +0300 (Wed, 20 May 2009) | 3 lines branches/zip: inno_bcmp(): Remove this memcmp replacement. srv0start.c does not (any longer) call memcmp. srv_parse_megabytes(): Add a function comment. ------------------------------------------------------------------------ r5052 | marko | 2009-05-20 12:32:37 +0300 (Wed, 20 May 2009) | 1 line branches/zip: ib_vector_is_empty(): Fix the function comment. ------------------------------------------------------------------------ r5054 | marko | 2009-05-20 12:35:33 +0300 (Wed, 20 May 2009) | 1 line branches/zip: page_cur_lcg_prng(): Add missing parameter list. ------------------------------------------------------------------------ r5057 | marko | 2009-05-20 12:45:17 +0300 (Wed, 20 May 2009) | 1 line branches/zip: Remove bogus in: comments from struct members. ------------------------------------------------------------------------ r5058 | marko | 2009-05-20 13:06:03 +0300 (Wed, 20 May 2009) | 1 line branches/zip: Clean up some function comments. ------------------------------------------------------------------------ r5060 | marko | 2009-05-20 14:06:59 +0300 (Wed, 20 May 2009) | 1 line branches/zip: Clean up some comments. ------------------------------------------------------------------------ r5061 | marko | 2009-05-20 14:07:49 +0300 (Wed, 20 May 2009) | 2 lines branches/zip: innodb_export_status(): Remove the return(0), now that the function was declared void in r5060. ------------------------------------------------------------------------ r5062 | marko | 2009-05-20 14:45:03 +0300 (Wed, 20 May 2009) | 1 line branches/zip: ha_innodb.cc: Clean up some comments. ------------------------------------------------------------------------ r5063 | marko | 2009-05-20 16:10:17 +0300 (Wed, 20 May 2009) | 1 line branches/zip: ut_dulint_sort(): Write proper comments. ------------------------------------------------------------------------ r5064 | marko | 2009-05-20 16:17:26 +0300 (Wed, 20 May 2009) | 2 lines branches/zip: innobase_end(), innobase_flush_logs(): Document the function parameters. ------------------------------------------------------------------------ r5065 | marko | 2009-05-20 23:17:43 +0300 (Wed, 20 May 2009) | 1 line branches/zip: ha_innodb.cc: Add some missing function comments. ------------------------------------------------------------------------ r5066 | marko | 2009-05-21 00:51:23 +0300 (Thu, 21 May 2009) | 2 lines branches/zip: Fix some function comments. ------------------------------------------------------------------------ r5070 | vasil | 2009-05-21 08:27:00 +0300 (Thu, 21 May 2009) | 4 lines branches/zip: Whitespace fixup. ------------------------------------------------------------------------
-
- 30 Apr, 2009 1 commit
-
-
inaam authored
mem_heap_get_size() scans all allocated blocks to calculate the total size of the heap. This patch introduces a new, total_size, field in mem_block_info_struct. This field is valid only for base block (i.e.: the first block allocated for the heap) and is set to ULINT_UNDEFINED in other blocks. This considerably improves the performance of redo scan during recovery. rb://108 issue#216 Approved by: Heikki
-
- 13 Apr, 2009 1 commit
-
-
inaam authored
Fix an error in the IO request array slot reservation. Increment cur_seg each time instead of doing it only when the request cannot be serviced from it. This ensures truly round robin allocation of incoming IO requests.
-
- 06 Apr, 2009 2 commits
-
-
marko authored
------------------------------------------------------------------------ r4660 | marko | 2009-04-06 16:17:30 +0300 (Mon, 06 Apr 2009) | 7 lines branches/zip: Initialize innodb_change_buffering from the configuration file. So far, the parameter innodb_change_buffering was only settable by the SET GLOBAL command. Any change specified in the configuration file or on the mysqld command line was ignored. This was reported as Issue #217. rb://109 approved by Heikki Tuuri. ------------------------------------------------------------------------
-
marko authored
------------------------------------------------------------------------ r4530 | marko | 2009-03-24 14:02:29 +0200 (Tue, 24 Mar 2009) | 3 lines branches/zip: Remove references to UNIV_HOTBACKUP from files that are not used when building InnoDB Hot Backup. Declare innobase_invalidate_query_cache() in ha_prototypes.h. ------------------------------------------------------------------------ r4531 | marko | 2009-03-24 15:46:12 +0200 (Tue, 24 Mar 2009) | 7 lines branches/zip: Note that buf_page_t::list and buf_page_t::in_flush_list are only protected by buf_pool_mutex, not by the block mutex. buf_page_release(): Remove the assertion on in_flush_list. The function is only holding block->mutex, not buf_pool_mutex. This was reported by Sunny. This was the only piece of code that accessed in_flush_list while not holding buf_pool_mutex. ------------------------------------------------------------------------ r4532 | calvin | 2009-03-24 17:59:45 +0200 (Tue, 24 Mar 2009) | 13 lines branches/zip: Mantis issue #201 - remove innodb_plugin_init() due to new option --ignore_builtin_innodb Starting 5.1.33, MySQL has a new option --ignore_builtin_innodb for using the dynamic plugin. It is required to remove innodb_plugin_init() in the plugin. This patch removes innodb_plugin_init() as well as functions, variables used by innodb_plugin_init(). rb://98 Approved by: Marko ------------------------------------------------------------------------ r4543 | inaam | 2009-03-25 19:18:33 +0200 (Wed, 25 Mar 2009) | 17 lines branches/zip SHOW ENGINE INNODB MUTEX shows all mutexes and rw_locks. This can be overwhelming particularly when the buffer pool is very large (note that each block in buffer pool has at least one mutex, one rw_lock and an additional mutex if rw_lock does not use atomics). With this patch status of following mutexes and rw-locks is not shown: 1) block->mutex 2) block->lock 3) block->lock->mutex (if applicable) 4) All other mutexes and rw-locks for which number of os-waits are zero Addresses issue# 179 rb://99 Approved by: Marko ------------------------------------------------------------------------ r4579 | marko | 2009-03-31 10:40:58 +0300 (Tue, 31 Mar 2009) | 3 lines branches/zip: struct read_view_struct: Add clarifying comments about low_limit_id and up_limit_id. ------------------------------------------------------------------------ r4630 | calvin | 2009-04-02 15:46:47 +0300 (Thu, 02 Apr 2009) | 6 lines branches/zip: Mantis issue #197 - Make srv_spin_wait_delay configurable New parameter innodb_spin_wait_delay to set the maximum delay between polling for a spin lock. 5 is the default. Approved by: Marko (on IM) ------------------------------------------------------------------------ r4631 | marko | 2009-04-02 16:23:12 +0300 (Thu, 02 Apr 2009) | 24 lines branches/zip: Refuse to use newly created indexes that may lack history. This addresses Mantis issue #116. dict_index_t: Enable the storage of trx_id. row_prebuilt_t: Make many fields bit-fields to reduce the memory footprint. Add index_usable. ha_innobase::change_active_index(): Check if the index is usable and set prebuilt->index_usable accordingly. Unfortunately, the return status of this function is ignored by MySQL, and the actual refusal to use the index must be made in row_search_for_mysql(). row_search_for_mysql(): Return DB_MISSING_HISTORY if !prebuilt->index_usable. convert_error_code_to_mysql(): Map DB_MISSING_HISTORY to HA_ERR_TABLE_DEF_CHANGED. innodb-index.test: Add a test case where access to a newly created secondary index must be blocked for old transactions. rb://100 approved by Heikki Tuuri ------------------------------------------------------------------------ r4647 | vasil | 2009-04-06 10:05:25 +0300 (Mon, 06 Apr 2009) | 4 lines branches/zip: Add changelog entry for c4630. ------------------------------------------------------------------------ r4648 | vasil | 2009-04-06 10:07:26 +0300 (Mon, 06 Apr 2009) | 4 lines branches/zip: Fix formatting in ChangeLog to be consistent. ------------------------------------------------------------------------ r4657 | marko | 2009-04-06 15:13:45 +0300 (Mon, 06 Apr 2009) | 1 line branches/zip: Remove the bogus failure reported in Issue #219. ------------------------------------------------------------------------
-
- 24 Mar, 2009 1 commit
-
-
marko authored
------------------------------------------------------------------------ r4152 | marko | 2009-02-10 12:52:27 +0200 (Tue, 10 Feb 2009) | 12 lines branches/zip: When innodb_use_sys_malloc is set, ignore innodb_additional_mem_pool_size, because nothing will be allocated from mem_comm_pool. mem_pool_create(): Remove the assertion about size. The function will work with any size. However, an assertion would fail in ut_malloc_low() when size==0. mem_init(): When srv_use_sys_malloc is set, pass size=1 to mem_pool_create(). mem0mem.c: Add #include "srv0srv.h" that is needed by mem0dbg.c. ------------------------------------------------------------------------ r4153 | vasil | 2009-02-10 22:58:17 +0200 (Tue, 10 Feb 2009) | 14 lines branches/zip: (followup to r4145) Non-functional change: Change the os_atomic_increment() and os_compare_and_swap() functions to macros to avoid artificial limitations on the types of those functions' arguments. As a consequence typecasts from the source code can be removed. Also remove Google's copyright from os0sync.ic because that file no longer contains code from Google. Approved by: Marko (rb://88), also ok from Inaam via IM ------------------------------------------------------------------------ r4163 | marko | 2009-02-12 00:14:19 +0200 (Thu, 12 Feb 2009) | 4 lines branches/zip: Make innodb_thread_concurrency=0 the default. The old default was 8. ------------------------------------------------------------------------ r4169 | calvin | 2009-02-12 10:37:10 +0200 (Thu, 12 Feb 2009) | 3 lines branches/zip: Adjust the result file of innodb_thread_concurrency_basic test. The default value of innodb_thread_concurrency is changed to 0 (from 8) via r4163. ------------------------------------------------------------------------ r4174 | vasil | 2009-02-12 17:38:27 +0200 (Thu, 12 Feb 2009) | 4 lines branches/zip: Fix pathname of the file to patch. ------------------------------------------------------------------------ r4176 | vasil | 2009-02-13 10:06:31 +0200 (Fri, 13 Feb 2009) | 7 lines branches/zip: Fix the failing mysql-test partition_innodb, which failed only if run after innodb_trx_weight (or other test that would leave LATEST DEADLOCK ERROR into the output of SHOW ENGINE INNODB STATUS). Find further explanation for the failure at the top of the added patch partition_innodb.diff. ------------------------------------------------------------------------ r4198 | vasil | 2009-02-17 09:06:07 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: Add the full text of the GPLv2 license into the root directory of the plugin. In previous releases this file was copied from an external source (https://svn.innodb.com/svn/plugin/trunk/support/COPYING) "manually" when creating the source and binary archives. It is less confusing to have this present in the root directory of the SVN branch. ------------------------------------------------------------------------ r4199 | vasil | 2009-02-17 09:11:58 +0200 (Tue, 17 Feb 2009) | 4 lines branches/zip: Add Google's license into COPYING.Google. ------------------------------------------------------------------------ r4200 | vasil | 2009-02-17 09:56:33 +0200 (Tue, 17 Feb 2009) | 11 lines branches/zip: To the files touched by the Google patch from c4144 (excluding include/os0sync.ic because later we removed Google code from that file): * Remove the Google license * Remove old Innobase copyright lines * Add a reference to the Google license and to the GPLv2 license at the top, as recommended by the lawyers at Oracle Legal. ------------------------------------------------------------------------ r4201 | vasil | 2009-02-17 10:12:02 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 1/28] ------------------------------------------------------------------------ r4202 | vasil | 2009-02-17 10:15:06 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 2/28] ------------------------------------------------------------------------ r4203 | vasil | 2009-02-17 10:25:45 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 3/28] ------------------------------------------------------------------------ r4204 | vasil | 2009-02-17 10:55:41 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 4/28] ------------------------------------------------------------------------ r4205 | vasil | 2009-02-17 10:59:22 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 5/28] ------------------------------------------------------------------------ r4206 | vasil | 2009-02-17 11:02:27 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 6/28] ------------------------------------------------------------------------ r4207 | vasil | 2009-02-17 11:04:28 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 7/28] ------------------------------------------------------------------------ r4208 | vasil | 2009-02-17 11:06:49 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 8/28] ------------------------------------------------------------------------ r4209 | vasil | 2009-02-17 11:10:18 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 9/28] ------------------------------------------------------------------------ r4210 | vasil | 2009-02-17 11:12:41 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 10/28] ------------------------------------------------------------------------ r4211 | vasil | 2009-02-17 11:14:40 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 11/28] ------------------------------------------------------------------------ r4212 | vasil | 2009-02-17 11:18:35 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 12/28] ------------------------------------------------------------------------ r4213 | vasil | 2009-02-17 11:24:40 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 13/28] ------------------------------------------------------------------------ r4214 | vasil | 2009-02-17 11:27:31 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 13/28] ------------------------------------------------------------------------ r4215 | vasil | 2009-02-17 11:29:55 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 15/28] ------------------------------------------------------------------------ r4216 | vasil | 2009-02-17 11:33:38 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 16/28] ------------------------------------------------------------------------ r4217 | vasil | 2009-02-17 11:36:44 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 17/28] ------------------------------------------------------------------------ r4218 | vasil | 2009-02-17 11:39:11 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 18/28] ------------------------------------------------------------------------ r4219 | vasil | 2009-02-17 11:41:24 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 19/28] ------------------------------------------------------------------------ r4220 | vasil | 2009-02-17 11:43:50 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 20/28] ------------------------------------------------------------------------ r4221 | vasil | 2009-02-17 11:46:52 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 21/28] ------------------------------------------------------------------------ r4222 | vasil | 2009-02-17 11:50:12 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 22/28] ------------------------------------------------------------------------ r4223 | vasil | 2009-02-17 11:53:58 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 23/28] ------------------------------------------------------------------------ r4224 | vasil | 2009-02-17 12:01:41 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 24/28] ------------------------------------------------------------------------ r4225 | vasil | 2009-02-17 12:05:45 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 25/28] ------------------------------------------------------------------------ r4226 | vasil | 2009-02-17 12:09:16 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 26/28] ------------------------------------------------------------------------ r4227 | vasil | 2009-02-17 12:12:56 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 27/28] ------------------------------------------------------------------------ r4228 | vasil | 2009-02-17 12:14:04 +0200 (Tue, 17 Feb 2009) | 8 lines branches/zip: * Remove old Innobase copyright lines from C source files * Add a reference to the GPLv2 license as recommended by the lawyers at Oracle Legal [Step 28/28] ------------------------------------------------------------------------ r4229 | vasil | 2009-02-17 12:30:55 +0200 (Tue, 17 Feb 2009) | 4 lines branches/zip: Add the copyright notice to the non C files. ------------------------------------------------------------------------ r4231 | marko | 2009-02-17 14:26:53 +0200 (Tue, 17 Feb 2009) | 12 lines Minor cleanup of the Google SMP patch. sync_array_object_signalled(): Add a (void) cast to eliminate a gcc warning about the return value of os_atomic_increment() being ignored. rw_lock_create_func(): Properly indent the preprocessor directives. rw_lock_x_lock_low(), rw_lock_x_lock_func_nowait(): Split lines correctly. rw_lock_set_writer_id_and_recursion_flag(): Silence a Valgrind warning. Do not mix statements and variable declarations. ------------------------------------------------------------------------ r4232 | marko | 2009-02-17 14:59:54 +0200 (Tue, 17 Feb 2009) | 3 lines branches/zip: When assigning lock->recursive = FALSE, also flag lock->writer_thread invalid, so that Valgrind will catch more errors. This is related to Issue #175. ------------------------------------------------------------------------ r4242 | marko | 2009-02-18 17:01:09 +0200 (Wed, 18 Feb 2009) | 2 lines branches/zip: UT_DBG_STOP: Use do{} while(0) to silence a g++-4.3.2 warning about a while(0); statement. This should fix (part of) Issue #176. ------------------------------------------------------------------------ r4243 | marko | 2009-02-18 17:04:03 +0200 (Wed, 18 Feb 2009) | 3 lines branches/zip: buf_buddy_get_slot(): Fix a gcc 4.3.2 warning about an empty body of a "for" statement. This fixes part of Issue #176. ------------------------------------------------------------------------ r4244 | marko | 2009-02-18 17:25:45 +0200 (Wed, 18 Feb 2009) | 11 lines branches/zip: Protect ut_total_allocated_memory with ut_list_mutex. Unprotected updates to ut_total_allocated_memory in os_mem_alloc_large() and os_mem_free_large(), called during fast index creation, may corrupt the variable and cause assertion failures. Also, add UNIV_MEM_ALLOC() and UNIV_MEM_FREE() instrumentation around os_mem_alloc_large() and os_mem_free_large(), so that Valgrind can detect more errors. rb://90 approved by Heikki Tuuri. This addresses Issue #177. ------------------------------------------------------------------------ r4248 | marko | 2009-02-19 11:52:39 +0200 (Thu, 19 Feb 2009) | 2 lines branches/zip: page_zip_set_size(): Fix a g++ 4.3.2 warning about an empty body in a "for" statement. This closes Issue #176. ------------------------------------------------------------------------ r4251 | inaam | 2009-02-19 15:46:27 +0200 (Thu, 19 Feb 2009) | 8 lines branches/zip: Issue #178 rb://91 Change plug.in to have same CXXFLAGS as CFLAGS. This is to ensure that both .c and .cc files get compiled with same flags. To fix the issue where UNIV_LINUX was defined only in .c files. Approved by: Marko ------------------------------------------------------------------------ r4258 | vasil | 2009-02-20 11:52:19 +0200 (Fri, 20 Feb 2009) | 7 lines branches/zip: Cleanup in ChangeLog: * Wrap lines at 78 characters * Changed files are listed alphabetically * White-space cleanup ------------------------------------------------------------------------ r4259 | vasil | 2009-02-20 11:59:42 +0200 (Fri, 20 Feb 2009) | 6 lines branches/zip: ChangeLog: Remove include/os0sync.ic from the entry about the google patch, this file was modified later to not include Google's code. ------------------------------------------------------------------------ r4262 | vasil | 2009-02-20 14:56:59 +0200 (Fri, 20 Feb 2009) | 373 lines branches/zip: Merge revisions 4035:4261 from branches/5.1: ------------------------------------------------------------------------ r4065 | sunny | 2009-01-29 16:01:36 +0200 (Thu, 29 Jan 2009) | 8 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: In the last round of AUTOINC cleanup we assumed that AUTOINC is only defined for integer columns. This caused an assertion failure when we checked for the maximum value of a column type. We now calculate the max value for floating-point autoinc columns too. Fix Bug#42400 - InnoDB autoinc code can't handle floating-point columns rb://84 and Mantis issue://162 ------------------------------------------------------------------------ r4111 | sunny | 2009-02-03 22:06:52 +0200 (Tue, 03 Feb 2009) | 2 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Add the ULL suffix otherwise there is an overflow. ------------------------------------------------------------------------ r4128 | vasil | 2009-02-08 21:36:45 +0200 (Sun, 08 Feb 2009) | 18 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2709.20.31 committer: Timothy Smith <timothy.smith@sun.com> branch nick: 51 timestamp: Fri 2008-12-19 01:28:51 +0100 message: Disable part of innodb-autoinc.test, because the MySQL server asserts when compiled --with-debug, due to bug 39828, "autoinc wraps around when offset and increment > 1". This change should be reverted when that bug is fixed (and a a few other minor changes to the test as described in comments). modified: mysql-test/r/innodb-autoinc.result mysql-test/t/innodb-autoinc.test ------------------------------------------------------------------------ r4129 | vasil | 2009-02-08 21:54:25 +0200 (Sun, 08 Feb 2009) | 310 lines Changed paths: M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Merge a change from MySQL: [looks like the changes to innodb-autoinc.test were made as part of the following huge merge, but we are merging only changes to that file] ------------------------------------------------------------ revno: 2546.47.1 committer: Luis Soares <luis.soares@sun.com> branch nick: 5.1-rpl timestamp: Fri 2009-01-23 13:22:05 +0100 message: merge: 5.1 -> 5.1-rpl conflicts: Text conflict in client/mysqltest.cc Text conflict in mysql-test/include/wait_until_connected_again.inc Text conflict in mysql-test/lib/mtr_report.pm Text conflict in mysql-test/mysql-test-run.pl Text conflict in mysql-test/r/events_bugs.result Text conflict in mysql-test/r/log_state.result Text conflict in mysql-test/r/myisam_data_pointer_size_func.result Text conflict in mysql-test/r/mysqlcheck.result Text conflict in mysql-test/r/query_cache.result Text conflict in mysql-test/r/status.result Text conflict in mysql-test/suite/binlog/r/binlog_index.result Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result Text conflict in mysql-test/suite/rpl/r/rpl_packet.result Text conflict in mysql-test/suite/rpl/t/rpl_packet.test Text conflict in mysql-test/t/disabled.def Text conflict in mysql-test/t/events_bugs.test Text conflict in mysql-test/t/log_state.test Text conflict in mysql-test/t/myisam_data_pointer_size_func.test Text conflict in mysql-test/t/mysqlcheck.test Text conflict in mysql-test/t/query_cache.test Text conflict in mysql-test/t/rpl_init_slave_func.test Text conflict in mysql-test/t/status.test removed: mysql-test/suite/parts/r/partition_bit_ndb.result mysql-test/suite/parts/t/partition_bit_ndb.test mysql-test/suite/parts/t/partition_sessions.test mysql-test/suite/sys_vars/inc/tmp_table_size_basic.inc mysql-test/suite/sys_vars/r/tmp_table_size_basic_32.result mysql-test/suite/sys_vars/r/tmp_table_size_basic_64.result mysql-test/suite/sys_vars/t/tmp_table_size_basic_32.test mysql-test/suite/sys_vars/t/tmp_table_size_basic_64.test mysql-test/t/log_bin_trust_function_creators_func-master.opt mysql-test/t/rpl_init_slave_func-slave.opt added: mysql-test/include/check_events_off.inc mysql-test/include/cleanup_fake_relay_log.inc mysql-test/include/have_simple_parser.inc mysql-test/include/no_running_event_scheduler.inc mysql-test/include/no_running_events.inc mysql-test/include/running_event_scheduler.inc mysql-test/include/setup_fake_relay_log.inc mysql-test/include/wait_condition_sp.inc mysql-test/r/fulltext_plugin.result mysql-test/r/have_simple_parser.require mysql-test/r/innodb_bug38231.result mysql-test/r/innodb_bug39438.result mysql-test/r/innodb_mysql_rbk.result mysql-test/r/partition_innodb_semi_consistent.result mysql-test/r/query_cache_28249.result mysql-test/r/status2.result mysql-test/std_data/bug40482-bin.000001 mysql-test/suite/binlog/r/binlog_innodb_row.result mysql-test/suite/binlog/t/binlog_innodb_row.test mysql-test/suite/rpl/r/rpl_binlog_corruption.result mysql-test/suite/rpl/t/rpl_binlog_corruption-master.opt mysql-test/suite/rpl/t/rpl_binlog_corruption.test mysql-test/suite/sys_vars/r/tmp_table_size_basic.result mysql-test/suite/sys_vars/t/tmp_table_size_basic.test mysql-test/t/fulltext_plugin-master.opt mysql-test/t/fulltext_plugin.test mysql-test/t/innodb_bug38231.test mysql-test/t/innodb_bug39438-master.opt mysql-test/t/innodb_bug39438.test mysql-test/t/innodb_mysql_rbk-master.opt mysql-test/t/innodb_mysql_rbk.test mysql-test/t/partition_innodb_semi_consistent-master.opt mysql-test/t/partition_innodb_semi_consistent.test mysql-test/t/query_cache_28249.test mysql-test/t/status2.test renamed: mysql-test/suite/funcs_1/r/is_collation_character_set_applicability.result => mysql-test/suite/funcs_1/r/is_coll_char_set_appl.result mysql-test/suite/funcs_1/t/is_collation_character_set_applicability.test => mysql-test/suite/funcs_1/t/is_coll_char_set_appl.test modified: .bzr-mysql/default.conf CMakeLists.txt client/mysql.cc client/mysql_upgrade.c client/mysqlcheck.c client/mysqltest.cc configure.in extra/resolve_stack_dump.c extra/yassl/include/openssl/ssl.h include/config-win.h include/m_ctype.h include/my_global.h mysql-test/extra/binlog_tests/database.test mysql-test/extra/rpl_tests/rpl_auto_increment.test mysql-test/include/commit.inc mysql-test/include/have_32bit.inc mysql-test/include/have_64bit.inc mysql-test/include/index_merge1.inc mysql-test/include/linux_sys_vars.inc mysql-test/include/windows_sys_vars.inc mysql-test/lib/mtr_report.pm mysql-test/mysql-test-run.pl mysql-test/r/alter_table.result mysql-test/r/commit_1innodb.result mysql-test/r/create.result mysql-test/r/csv.result mysql-test/r/ctype_ucs.result mysql-test/r/date_formats.result mysql-test/r/events_bugs.result mysql-test/r/events_scheduling.result mysql-test/r/fulltext.result mysql-test/r/func_if.result mysql-test/r/func_in.result mysql-test/r/func_str.result mysql-test/r/func_time.result mysql-test/r/grant.result mysql-test/r/index_merge_myisam.result mysql-test/r/information_schema.result mysql-test/r/innodb-autoinc.result mysql-test/r/innodb.result mysql-test/r/innodb_mysql.result mysql-test/r/log_bin_trust_function_creators_func.result mysql-test/r/log_state.result mysql-test/r/myisampack.result mysql-test/r/mysql.result mysql-test/r/mysqlcheck.result mysql-test/r/partition_datatype.result mysql-test/r/partition_mgm.result mysql-test/r/partition_pruning.result mysql-test/r/query_cache.result mysql-test/r/read_buffer_size_basic.result mysql-test/r/read_rnd_buffer_size_basic.result mysql-test/r/rpl_init_slave_func.result mysql-test/r/select.result mysql-test/r/status.result mysql-test/r/strict.result mysql-test/r/temp_table.result mysql-test/r/type_bit.result mysql-test/r/type_date.result mysql-test/r/type_float.result mysql-test/r/warnings_engine_disabled.result mysql-test/r/xml.result mysql-test/suite/binlog/r/binlog_database.result mysql-test/suite/binlog/r/binlog_index.result mysql-test/suite/binlog/r/binlog_innodb.result mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result mysql-test/suite/binlog/t/binlog_innodb.test mysql-test/suite/funcs_1/r/is_columns_is.result mysql-test/suite/funcs_1/r/is_engines.result mysql-test/suite/funcs_1/r/storedproc.result mysql-test/suite/funcs_1/storedproc/param_check.inc mysql-test/suite/funcs_2/t/disabled.def mysql-test/suite/ndb/t/disabled.def mysql-test/suite/parts/r/partition_bit_innodb.result mysql-test/suite/parts/r/partition_bit_myisam.result mysql-test/suite/parts/r/partition_special_innodb.result mysql-test/suite/parts/t/disabled.def mysql-test/suite/parts/t/partition_special_innodb.test mysql-test/suite/parts/t/partition_value_innodb.test mysql-test/suite/parts/t/partition_value_myisam.test mysql-test/suite/parts/t/partition_value_ndb.test mysql-test/suite/rpl/r/rpl_auto_increment.result mysql-test/suite/rpl/r/rpl_packet.result mysql-test/suite/rpl/r/rpl_row_create_table.result mysql-test/suite/rpl/r/rpl_slave_skip.result mysql-test/suite/rpl/r/rpl_trigger.result mysql-test/suite/rpl/t/disabled.def mysql-test/suite/rpl/t/rpl_packet.test mysql-test/suite/rpl/t/rpl_row_create_table.test mysql-test/suite/rpl/t/rpl_slave_skip.test mysql-test/suite/rpl/t/rpl_trigger.test mysql-test/suite/rpl_ndb/t/disabled.def mysql-test/suite/sys_vars/inc/key_buffer_size_basic.inc mysql-test/suite/sys_vars/inc/sort_buffer_size_basic.inc mysql-test/suite/sys_vars/r/key_buffer_size_basic_32.result mysql-test/suite/sys_vars/r/key_buffer_size_basic_64.result mysql-test/suite/sys_vars/r/sort_buffer_size_basic_32.result mysql-test/suite/sys_vars/r/sort_buffer_size_basic_64.result mysql-test/t/alter_table.test mysql-test/t/create.test mysql-test/t/csv.test mysql-test/t/ctype_ucs.test mysql-test/t/date_formats.test mysql-test/t/disabled.def mysql-test/t/events_bugs.test mysql-test/t/events_scheduling.test mysql-test/t/fulltext.test mysql-test/t/func_if.test mysql-test/t/func_in.test mysql-test/t/func_str.test mysql-test/t/func_time.test mysql-test/t/grant.test mysql-test/t/information_schema.test mysql-test/t/innodb-autoinc.test mysql-test/t/innodb.test mysql-test/t/innodb_mysql.test mysql-test/t/log_bin_trust_function_creators_func.test mysql-test/t/log_state.test mysql-test/t/myisam_data_pointer_size_func.test mysql-test/t/myisampack.test mysql-test/t/mysql.test mysql-test/t/mysqlcheck.test mysql-test/t/partition_innodb_stmt.test mysql-test/t/partition_mgm.test mysql-test/t/partition_pruning.test mysql-test/t/query_cache.test mysql-test/t/rpl_init_slave_func.test mysql-test/t/select.test mysql-test/t/status.test mysql-test/t/strict.test mysql-test/t/temp_table.test mysql-test/t/type_bit.test mysql-test/t/type_date.test mysql-test/t/type_float.test mysql-test/t/warnings_engine_disabled.test mysql-test/t/xml.test mysys/my_getopt.c mysys/my_init.c scripts/mysql_install_db.sh sql-common/my_time.c sql/field.cc sql/field.h sql/filesort.cc sql/ha_partition.cc sql/ha_partition.h sql/item.cc sql/item_cmpfunc.cc sql/item_func.h sql/item_strfunc.cc sql/item_sum.cc sql/item_timefunc.cc sql/item_timefunc.h sql/log.cc sql/log.h sql/log_event.cc sql/log_event.h sql/mysql_priv.h sql/mysqld.cc sql/opt_range.cc sql/partition_info.cc sql/repl_failsafe.cc sql/rpl_constants.h sql/set_var.cc sql/slave.cc sql/spatial.h sql/sql_acl.cc sql/sql_base.cc sql/sql_binlog.cc sql/sql_class.h sql/sql_cursor.cc sql/sql_delete.cc sql/sql_lex.cc sql/sql_lex.h sql/sql_locale.cc sql/sql_parse.cc sql/sql_partition.cc sql/sql_plugin.cc sql/sql_plugin.h sql/sql_profile.cc sql/sql_repl.cc sql/sql_select.cc sql/sql_select.h sql/sql_show.cc sql/sql_table.cc sql/sql_trigger.cc sql/sql_trigger.h sql/table.cc sql/table.h sql/unireg.cc storage/csv/ha_tina.cc storage/federated/ha_federated.cc storage/heap/ha_heap.cc storage/innobase/Makefile.am storage/innobase/btr/btr0sea.c storage/innobase/buf/buf0lru.c storage/innobase/dict/dict0dict.c storage/innobase/dict/dict0mem.c storage/innobase/handler/ha_innodb.cc storage/innobase/handler/ha_innodb.h storage/innobase/include/btr0sea.h storage/innobase/include/dict0dict.h storage/innobase/include/dict0mem.h storage/innobase/include/ha_prototypes.h storage/innobase/include/lock0lock.h storage/innobase/include/row0mysql.h storage/innobase/include/sync0sync.ic storage/innobase/include/ut0ut.h storage/innobase/lock/lock0lock.c storage/innobase/os/os0file.c storage/innobase/plug.in storage/innobase/row/row0mysql.c storage/innobase/row/row0sel.c storage/innobase/srv/srv0srv.c storage/innobase/srv/srv0start.c storage/innobase/ut/ut0ut.c storage/myisam/ft_boolean_search.c strings/ctype.c strings/xml.c tests/mysql_client_test.c win/configure.js mysql-test/suite/funcs_1/t/is_coll_char_set_appl.test ------------------------------------------------------------------------ r4165 | calvin | 2009-02-12 01:34:27 +0200 (Thu, 12 Feb 2009) | 1 line Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: minor non-functional changes. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4263 | vasil | 2009-02-20 15:00:46 +0200 (Fri, 20 Feb 2009) | 4 lines branches/zip: Add a ChangeLog entry for a change in r4262. ------------------------------------------------------------------------ r4265 | marko | 2009-02-20 22:31:03 +0200 (Fri, 20 Feb 2009) | 5 lines branches/zip: Make innodb_use_sys_malloc=ON the default. Replace srv_use_sys_malloc with UNIV_LIKELY(srv_use_sys_malloc) to improve branch prediction in the default case. Approved by Ken over the IM. ------------------------------------------------------------------------ r4266 | vasil | 2009-02-20 23:29:32 +0200 (Fri, 20 Feb 2009) | 7 lines branches/zip: Add a sentence at the top of COPYING.Google to clarify that this license does not apply to the whole InnoDB. Suggested by: Ken ------------------------------------------------------------------------ r4268 | marko | 2009-02-23 12:43:51 +0200 (Mon, 23 Feb 2009) | 9 lines branches/zip: Initialize ut_list_mutex at startup. Without this fix, ut_list_mutex would be used uninitialized when innodb_use_sys_malloc=1. This fix addresses Issue #181. ut_mem_block_list_init(): Rename to ut_mem_init() and make public. ut_malloc_low(), ut_free_all_mem(): Add ut_a(ut_mem_block_list_inited). mem_init(): Call ut_mem_init(). ------------------------------------------------------------------------ r4269 | marko | 2009-02-23 15:09:49 +0200 (Mon, 23 Feb 2009) | 7 lines branches/zip: When freeing an uncompressed BLOB page, tolerate garbage in FIL_PAGE_TYPE. (Bug #43043, Issue #182) btr_check_blob_fil_page_type(): New function. btr_free_externally_stored_field(), btr_copy_blob_prefix(): Call btr_check_blob_fil_page_type() to check FIL_PAGE_TYPE. ------------------------------------------------------------------------ r4272 | marko | 2009-02-23 23:10:18 +0200 (Mon, 23 Feb 2009) | 8 lines branches/zip: Adjust the fix of Issue #182 in r4269 per Inaam's suggestion. btr_check_blob_fil_page_type(): Replace the parameter const char* op with ibool read. Do not print anything about page type mismatch when reading a BLOB page in Antelope format. Print space id before page number. ------------------------------------------------------------------------ r4273 | marko | 2009-02-24 00:11:11 +0200 (Tue, 24 Feb 2009) | 1 line branches/zip: ut_mem_init(): Add the assertion !ut_mem_block_list_inited. ------------------------------------------------------------------------ r4274 | marko | 2009-02-24 00:14:38 +0200 (Tue, 24 Feb 2009) | 12 lines branches/zip: Fix bugs in the fix of Issue #181. Tested inside and outside Valgrind, with innodb_use_sys_malloc set to 0 and 1. mem_init(): Invoke ut_mem_init() before mem_pool_create(), because the latter one will invoke ut_malloc(). srv_general_init(): Do not initialize the memory subsystem (mem_init()). innobase_init(): Initialize the memory subsystem (mem_init()) before calling srv_parse_data_file_paths_and_sizes(), which needs ut_malloc(). Call ut_free_all_mem() in error handling to clean up after the mem_init(). ------------------------------------------------------------------------ r4280 | marko | 2009-02-24 15:14:59 +0200 (Tue, 24 Feb 2009) | 1 line branches/zip: Remove unused function os_mem_alloc_nocache(). ------------------------------------------------------------------------ r4281 | marko | 2009-02-24 16:02:48 +0200 (Tue, 24 Feb 2009) | 1 line branches/zip: Remove the unused function dict_index_get_type(). ------------------------------------------------------------------------ r4283 | marko | 2009-02-24 23:06:56 +0200 (Tue, 24 Feb 2009) | 1 line branches/zip: srv0start.c: Remove unnecessary #include "mem0pool.h". ------------------------------------------------------------------------ r4284 | marko | 2009-02-24 23:26:38 +0200 (Tue, 24 Feb 2009) | 1 line branches/zip: mem0mem.c: Remove unnecessary #include "mach0data.h". ------------------------------------------------------------------------ r4288 | vasil | 2009-02-25 10:48:07 +0200 (Wed, 25 Feb 2009) | 21 lines branches/zip: Merge revisions 4261:4287 from branches/5.1: ------------------------------------------------------------------------ r4287 | sunny | 2009-02-25 05:32:01 +0200 (Wed, 25 Feb 2009) | 10 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Fix Bug#42714 AUTO_INCREMENT errors in 5.1.31. There are two changes to the autoinc handling. 1. To fix the immediate problem from the bug report, we must ensure that the value written to the table is always less than the max value stored in dict_table_t. 2. The second related change is that according to MySQL documentation when the offset is greater than the increment, we should ignore the offset. ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4289 | vasil | 2009-02-25 10:53:51 +0200 (Wed, 25 Feb 2009) | 4 lines branches/zip: Add ChangeLog entry for the fix in r4288. ------------------------------------------------------------------------ r4290 | vasil | 2009-02-25 11:05:44 +0200 (Wed, 25 Feb 2009) | 11 lines branches/zip: Make ChangeLog entries for bugs in bugs.mysql.com in the form: Fix Bug#12345 bug title (for bugs after 1.0.2 was released and the ChangeLog published) There is no need to bloat the ChangeLog with information that is available via bugs.mysql.com. Discussed with: Marko ------------------------------------------------------------------------ r4291 | vasil | 2009-02-25 11:08:32 +0200 (Wed, 25 Feb 2009) | 4 lines branches/zip: Fix Bug synopsis and remove explanation ------------------------------------------------------------------------ r4292 | marko | 2009-02-25 12:09:15 +0200 (Wed, 25 Feb 2009) | 25 lines branches/zip: Correct the initialization of the memory subsystem once again, to finally put Issue #181 to rest. Revert some parts of r4274. It is best not to call ut_malloc() before srv_general_init(). mem_init(): Do not call ut_mem_init(). srv_general_init(): Initialize the memory subsystem in two phases: first ut_mem_init(), then mem_init(). This is because os_sync_init() and sync_init() depend on ut_mem_init() and mem_init() depends on os_sync_init() or sync_init(). srv_parse_data_file_paths_and_sizes(), srv_parse_log_group_home_dirs(): Remove the output parameters. Assign to the global variables directly. Allocate memory with malloc() instead of ut_malloc(), because these functions will be called before srv_general_init(). srv_free_paths_and_sizes(): New function, for cleaning up after srv_parse_data_file_paths_and_sizes() and srv_parse_log_group_home_dirs(). rb://92 approved by Sunny Bains ------------------------------------------------------------------------ r4297 | vasil | 2009-02-25 17:19:19 +0200 (Wed, 25 Feb 2009) | 4 lines branches/zip: White-space cleanup in the ChangeLog ------------------------------------------------------------------------ r4301 | vasil | 2009-02-25 21:33:32 +0200 (Wed, 25 Feb 2009) | 5 lines branches/zip: Do not output the commands that restore the environment because they depend on the state of the environment before the test starts executing. ------------------------------------------------------------------------ r4315 | vasil | 2009-02-26 09:21:20 +0200 (Thu, 26 Feb 2009) | 5 lines branches/zip: Apply any necessary patches to the mysql tree at the end of setup.sh This step was previously done manually (and sometimes forgotten). ------------------------------------------------------------------------ r4319 | marko | 2009-02-26 23:27:51 +0200 (Thu, 26 Feb 2009) | 6 lines branches/zip: btr_check_blob_fil_page_type(): Do not report FIL_PAGE_TYPE mismatch even when purging a BLOB. Heavy users may have large data files created with MySQL 5.0 or earlier, and they don not want to have the error log flooded with such messages. This fixes Issue #182. ------------------------------------------------------------------------ r4320 | inaam | 2009-02-27 02:13:19 +0200 (Fri, 27 Feb 2009) | 8 lines branches/zip This is to revert the changes made to the plug.in (r4251) as a fix for issue# 178. Changes to plug.in will not propogate to a plugin installation unless autotools are rerun which is unacceptable. A fix for issue# 178 will be committed in a separate commit. ------------------------------------------------------------------------ r4321 | inaam | 2009-02-27 02:16:46 +0200 (Fri, 27 Feb 2009) | 6 lines branches/zip This is a fix for issue#178. Instead of using UNIV_LINUX which is defined through CFLAGS we use compiler generated define __linux__ that is effective for both .c and .cc files. ------------------------------------------------------------------------ r4324 | vasil | 2009-02-27 13:27:18 +0200 (Fri, 27 Feb 2009) | 39 lines branches/zip: Add FreeBSD to the list of the operating systems that have sizeof(pthread_t) == sizeof(void*) (i.e. word size). On FreeBSD pthread_t is defined like: /usr/include/sys/_pthreadtypes.h: typedef struct pthread *pthread_t; I did the following tests (per Inaam's recommendation): a) appropriate version of GCC is available on that platform (4.1.2 or higher for atomics to be available) On FreeBSD 6.x the default compiler is 3.4.6, on FreeBSD 7.x the default one is 4.2.1. One can always install the version of choice from the ports collection. If gcc 3.x is used then HAVE_GCC_ATOMIC_BUILTINS will not be defined and thus the change I am committing will make no difference. b) find out if sizeof(pthread_t) == sizeof(long) On 32 bit both are 4 bytes, on 64 bit both are 8 bytes. c) find out the compiler generated platform define (e.g.: __aix, __sunos__ etc.) The macro is __FreeBSD__. d) patch univ.i with the appropriate platform define e) build the mysql f) ensure it is using atomic builtins (look at the err.log message at system startup. It should say we are using atomics for both mutexes and rw-locks) g) do sanity testing (keeping in view the smp changes) I ran the mysql-test suite. All tests pass. ------------------------------------------------------------------------ r4353 | vasil | 2009-03-05 09:27:29 +0200 (Thu, 05 Mar 2009) | 6 lines branches/zip: As suggested by Ken, print a message that says that the Google SMP patch (GCC atomics) is disabled if it is. Also extend the message when the patch is partially enabled to make it clear that it is partially enabled. ------------------------------------------------------------------------ r4356 | vasil | 2009-03-05 13:49:51 +0200 (Thu, 05 Mar 2009) | 4 lines branches/zip: Fix typo made in r4353. ------------------------------------------------------------------------ r4357 | vasil | 2009-03-05 16:38:59 +0200 (Thu, 05 Mar 2009) | 23 lines branches/zip: Implement a check whether pthread_t objects can be used by GCC atomic builtin functions. This check is implemented in plug.in and defines the macro HAVE_ATOMIC_PTHREAD_T. This macro is checked in univ.i and the relevant part of the code enabled (the one that uses GCC atomics against pthread_t objects). In addition to this, the same program that is compiled as part of the plug.in check is added in ut/ut0auxconf.c. In the InnoDB Plugin source archives that are shipped to the users, a generated Makefile.in is added. That Makefile.in will be modified to compile ut/ut0auxconf.c and define the macro HAVE_ATOMIC_PTHREAD_T if the compilation succeeds. I.e. Makefile.in will emulate the work that is done by plug.in. This is done in order to make the check happen and HAVE_ATOMIC_PTHREAD_T eventually defined without regenerating MySQL's ./configure from ./storage/innobase/plug.in. The point is not to ask users to install the autotools and regenerate ./configure. rb://95 Approved by: Marko ------------------------------------------------------------------------ r4360 | vasil | 2009-03-05 22:23:17 +0200 (Thu, 05 Mar 2009) | 21 lines branches/zip: Merge revisions 4287:4357 from branches/5.1: ------------------------------------------------------------------------ r4325 | sunny | 2009-03-02 02:28:52 +0200 (Mon, 02 Mar 2009) | 10 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc M /branches/5.1/mysql-test/innodb-autoinc.result M /branches/5.1/mysql-test/innodb-autoinc.test branches/5.1: Bug#43203: Overflow from auto incrementing causes server segv It was not a SIGSEGV but an assertion failure. The assertion was checking the invariant that *first_value passed in by MySQL doesn't contain a value that is greater than the max value for that type. The assertion has been changed to a check and if the value is greater than the max we report a generic AUTOINC failure. rb://93 Approved by Heikki ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4361 | vasil | 2009-03-05 22:27:54 +0200 (Thu, 05 Mar 2009) | 30 lines branches/zip: Merge revision 4358 from branches/5.1 (resolving a conflict): ------------------------------------------------------------------------ r4358 | vasil | 2009-03-05 21:21:10 +0200 (Thu, 05 Mar 2009) | 21 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2728.19.1 committer: Alfranio Correia <alfranio.correia@sun.com> branch nick: mysql-5.1-bugteam timestamp: Tue 2009-02-03 11:36:46 +0000 message: BUG#42445 Warning messages in innobase/handler/ha_innodb.cc There was a type casting problem in the storage/innobase/handler/ha_innodb.cc, (int ha_innobase::write_row(...)). Innobase uses has an internal error variable of type 'ulint' while mysql uses an 'int'. To fix the problem the function manipulates an error variable of type 'ulint' and only casts it into 'int' when needs to return the value. modified: storage/innobase/handler/ha_innodb.cc ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4362 | vasil | 2009-03-05 22:29:07 +0200 (Thu, 05 Mar 2009) | 23 lines branches/zip: Merge revision 4359 from branches/5.1: ------------------------------------------------------------------------ r4359 | vasil | 2009-03-05 21:42:01 +0200 (Thu, 05 Mar 2009) | 14 lines Changed paths: M /branches/5.1/handler/ha_innodb.cc branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2747 committer: Timothy Smith <timothy.smith@sun.com> branch nick: 51 timestamp: Fri 2009-01-16 17:49:07 +0100 message: Add another cast to ignore int/ulong difference in error types, silence warning on Win64 modified: storage/innobase/handler/ha_innodb.cc ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4363 | vasil | 2009-03-05 22:31:37 +0200 (Thu, 05 Mar 2009) | 4 lines branches/zip: Add ChangeLog entry for the bugfix in c4360. ------------------------------------------------------------------------ r4378 | calvin | 2009-03-09 10:10:17 +0200 (Mon, 09 Mar 2009) | 7 lines branches/zip: remove compile flag MYSQL_SERVER for dynamic plugin The dynamic plugin on Windows used to be built with MYSQL_SERVER compile flag, while it is not the case for other platforms. r3797 assumed MYSQL_SERVER was not defined for dynamic plugin, which introduced the engine crash during dropping a database. ------------------------------------------------------------------------ r4396 | marko | 2009-03-12 09:22:27 +0200 (Thu, 12 Mar 2009) | 3 lines branches/zip: btr_store_big_rec_extern_fields(): Initialize FIL_PAGE_TYPE in a separate redo log entry. This will make ibbackup --apply-log debugging easier. ------------------------------------------------------------------------ r4397 | marko | 2009-03-12 09:26:11 +0200 (Thu, 12 Mar 2009) | 3 lines branches/zip: trx_sys_create_doublewrite_buf(): As the dummy change, initialize FIL_PAGE_TYPE. This will make it easier to write the debug assertions for ibbackup --apply-log. ------------------------------------------------------------------------ r4401 | marko | 2009-03-12 10:26:40 +0200 (Thu, 12 Mar 2009) | 19 lines branches/zip: Merge revisions 4359:4400 from branches/5.1: ------------------------------------------------------------------------ r4399 | marko | 2009-03-12 09:38:05 +0200 (Thu, 12 Mar 2009) | 2 lines branches/5.1: row_sel_get_clust_rec_for_mysql(): Store the cursor position also for unlock_row(). (Bug #39320) ------------------------------------------------------------------------ r4400 | marko | 2009-03-12 10:06:44 +0200 (Thu, 12 Mar 2009) | 5 lines branches/5.1: Fix a bug in multi-table semi-consistent reads. Remember the acquired record locks per table handle (row_prebuilt_t) rather than per transaction (trx_t), so that unlock_row should successfully unlock all non-matching rows in multi-table operations. This deficiency was found while investigating Bug #39320. ------------------------------------------------------------------------ These were submitted as rb://94 and rb://96 and approved by Heikki Tuuri. ------------------------------------------------------------------------ r4455 | marko | 2009-03-16 11:43:34 +0200 (Mon, 16 Mar 2009) | 2 lines branches/zip: UT_LIST_VALIDATE(): Add the parameter ASSERTION and adjust all callers. ------------------------------------------------------------------------ r4456 | marko | 2009-03-16 12:59:25 +0200 (Mon, 16 Mar 2009) | 6 lines branches/zip: UT_LIST_VALIDATE(): Assert that the link is non-NULL before dereferencing it. In this way, ut_list_node_313 will be pointing to the last non-NULL list item at the time of the assertion failure. (gcc-4.3.2 -O3 seems to optimize the common subexpressions and make the variable NULL, though.) ------------------------------------------------------------------------ r4457 | marko | 2009-03-16 14:12:02 +0200 (Mon, 16 Mar 2009) | 2 lines branches/zip: sync_thread_add_level(): Make the assertions about level == SYNC_BUF_BLOCK more readable. ------------------------------------------------------------------------ r4461 | vasil | 2009-03-17 09:38:19 +0200 (Tue, 17 Mar 2009) | 6 lines branches/zip: Remove mysql-test/patches/bug32625.diff because that bug was fixed in the mysql repository (1 year and 4 months after sending them the simple patch!). See http://bugs.mysql.com/32625 ------------------------------------------------------------------------ r4465 | marko | 2009-03-17 12:34:19 +0200 (Tue, 17 Mar 2009) | 1 line branches/zip: buf0buddy.c: Add and adjust some debug assertions. ------------------------------------------------------------------------ r4473 | vasil | 2009-03-17 15:50:30 +0200 (Tue, 17 Mar 2009) | 5 lines branches/zip: Increment the InnoDB Plugin version from 1.0.3 to 1.0.4 now that 1.0.3 has been released. ------------------------------------------------------------------------ r4478 | vasil | 2009-03-18 11:53:53 +0200 (Wed, 18 Mar 2009) | 5 lines branches/zip: Remove mysql-test/patches/bug41893.diff because that bug has been fixed in the MySQL repository, see http://bugs.mysql.com/41893. ------------------------------------------------------------------------ r4479 | marko | 2009-03-18 12:43:54 +0200 (Wed, 18 Mar 2009) | 2 lines branches/zip: buf_LRU_block_remove_hashed_page(): Add some debug assertions. ------------------------------------------------------------------------ r4480 | marko | 2009-03-18 14:32:13 +0200 (Wed, 18 Mar 2009) | 1 line branches/zip: buf_buddy_free_low(): Correct the function comment. ------------------------------------------------------------------------ r4482 | marko | 2009-03-19 15:23:32 +0200 (Thu, 19 Mar 2009) | 12 lines branches/zip: Merge revisions 4400:4481 from branches/5.1: ------------------------------------------------------------------------ r4481 | marko | 2009-03-19 15:01:48 +0200 (Thu, 19 Mar 2009) | 6 lines branches/5.1: row_unlock_for_mysql(): Do not unlock records that were modified by the current transaction. This bug was introduced or unmasked in r4400. rb://97 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4490 | marko | 2009-03-20 12:33:33 +0200 (Fri, 20 Mar 2009) | 4 lines branches/zip: Non-functional change for reducing dependencies in InnoDB Hot Backup: Replace srv_sys->dummy_ind1 and srv_sys->dummy_ind2 with dict_ind_redundant and dict_ind_compact, initialized in dict_init(). ------------------------------------------------------------------------ r4491 | marko | 2009-03-20 12:45:18 +0200 (Fri, 20 Mar 2009) | 2 lines branches/zip: Add const qualifiers or in/out comments to some function parameters in log0log. ------------------------------------------------------------------------ r4492 | marko | 2009-03-20 12:52:14 +0200 (Fri, 20 Mar 2009) | 5 lines branches/zip: page_validate(): Always report the space id and the name of the index. In Hot Backup, do not invoke comparison functions, as MySQL collations will be unavailable. ------------------------------------------------------------------------ r4493 | marko | 2009-03-20 13:24:06 +0200 (Fri, 20 Mar 2009) | 1 line branches/zip: Replace fil_get_space_for_id_low() with fil_space_get_by_id(). ------------------------------------------------------------------------ r4494 | marko | 2009-03-20 13:51:35 +0200 (Fri, 20 Mar 2009) | 3 lines branches/zip: fil0fil.c: Refer to fil_system directly, not via local vars. This eliminates some "unused variable" warnings when building InnoDB Hot Backup in such a way that all mutex operations are no-ops. ------------------------------------------------------------------------ r4495 | marko | 2009-03-20 14:15:52 +0200 (Fri, 20 Mar 2009) | 1 line branches/zip: innobase_get_at_most_n_mbchars(): Declare in ha_prototypes.h. ------------------------------------------------------------------------ r4496 | marko | 2009-03-20 14:48:26 +0200 (Fri, 20 Mar 2009) | 1 line branches/zip: recv_recover_page(): Remove compile-time constant parameters. ------------------------------------------------------------------------ r4497 | marko | 2009-03-20 14:56:19 +0200 (Fri, 20 Mar 2009) | 1 line branches/zip: recv_sys_init(): Remove a compile-time constant parameter. ------------------------------------------------------------------------ r4498 | marko | 2009-03-20 15:08:05 +0200 (Fri, 20 Mar 2009) | 4 lines branches/zip: Non-functional change: Add const qualifiers. log_block_checksum_is_ok_or_old_format(), recv_sys_add_to_parsing_buf(): The log block is read-only. Make it const. ------------------------------------------------------------------------ r4499 | marko | 2009-03-20 15:10:25 +0200 (Fri, 20 Mar 2009) | 1 line branches/zip: recv_scan_log_recs(): Remove a compile-time constant parameter. ------------------------------------------------------------------------ r4500 | marko | 2009-03-20 15:47:17 +0200 (Fri, 20 Mar 2009) | 1 line branches/zip: fil_init(): Add the parameter hash_size. ------------------------------------------------------------------------ r4501 | vasil | 2009-03-20 16:50:41 +0200 (Fri, 20 Mar 2009) | 4 lines branches/zip: Add any entry about the release of 1.0.3 in the ChangeLog. ------------------------------------------------------------------------ r4515 | marko | 2009-03-23 10:49:53 +0200 (Mon, 23 Mar 2009) | 1 line branches/zip: hash_table_t: adaptive: Remove from UNIV_HOTBACKUP builds. ------------------------------------------------------------------------ r4516 | marko | 2009-03-23 10:57:16 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: Define and use ASSERT_HASH_MUTEX_OWN. Make it a no-op in UNIV_HOTBACKUP builds. ------------------------------------------------------------------------ r4517 | marko | 2009-03-23 11:07:20 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: Define and use PAGE_ZIP_MATCH. In UNIV_HOTBACKUP builds, assume fixed allocation. ------------------------------------------------------------------------ r4521 | marko | 2009-03-23 12:05:47 +0200 (Mon, 23 Mar 2009) | 1 line branches/zip: buf_page_print(): Clean up the code #ifdef UNIV_HOTBACKUP. ------------------------------------------------------------------------ r4522 | marko | 2009-03-23 12:20:50 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: Exclude some operating system interface code from UNIV_HOTBACKUP builds. ------------------------------------------------------------------------ r4523 | marko | 2009-03-23 13:00:43 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: Remove the remaining references to hash_table_t::adapive from UNIV_HOTBACKUP builds. This should have been done in r4515. ------------------------------------------------------------------------ r4524 | marko | 2009-03-23 14:05:18 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: Enclose recv_recovery_from_backup_on and recv_recovery_from_backup_is_on() in #ifdef UNIV_LOG_ARCHIVE. ------------------------------------------------------------------------ r4525 | marko | 2009-03-23 14:57:45 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: recv_parse_or_apply_log_rec_body(): Add debug assertions ensuring that FIL_PAGE_TYPE makes sense when applying log records. ------------------------------------------------------------------------ r4526 | marko | 2009-03-23 16:21:34 +0200 (Mon, 23 Mar 2009) | 2 lines branches/zip: Remove unneeded definitions and dependencies from UNIV_HOTBACKUP builds. ------------------------------------------------------------------------ r4527 | calvin | 2009-03-23 23:15:33 +0200 (Mon, 23 Mar 2009) | 5 lines branches/zip: adjust build files on Windows Adjust the patch positions based on the latest MySQL source. Also add the patches to the .bat files for vs9. ------------------------------------------------------------------------
-
- 10 Feb, 2009 1 commit
-
-
marko authored
------------------------------------------------------------------------ r4074 | vasil | 2009-01-31 08:05:24 +0200 (Sat, 31 Jan 2009) | 4 lines branches/zip: Adjust the failing patch patches/information_schema.diff. ------------------------------------------------------------------------ r4076 | vasil | 2009-02-02 09:32:04 +0200 (Mon, 02 Feb 2009) | 4 lines branches/zip: Add ChangeLog entry for the change in r4072. ------------------------------------------------------------------------ r4077 | marko | 2009-02-02 10:48:05 +0200 (Mon, 02 Feb 2009) | 2 lines branches/zip: innobase_start_or_create_for_mysql(): Remove a factual error in the function comment. Parameters are not read from a file "srv_init". ------------------------------------------------------------------------ r4081 | marko | 2009-02-02 14:28:17 +0200 (Mon, 02 Feb 2009) | 4 lines branches/zip: Enclose some backup functions in #ifdef UNIV_HOTBACKUP. recv_read_cp_info_for_backup(), recv_scan_log_seg_for_backup(): These functions are only called by InnoDB Hot Backup. ------------------------------------------------------------------------ r4082 | vasil | 2009-02-02 18:24:08 +0200 (Mon, 02 Feb 2009) | 10 lines branches/zip: Fix a mysql-test failure in innodb-zip: main.innodb-zip [ fail ] Test ended at 2009-02-02 18:13:25 CURRENT_TEST: main.innodb-zip mysqltest: At line 160: Found line beginning with -- that didn't contain a valid mysqltest command, check your syntax or use # if you intended to write a comment ------------------------------------------------------------------------ r4083 | vasil | 2009-02-02 18:33:20 +0200 (Mon, 02 Feb 2009) | 6 lines branches/zip: Fix the failing innodb-zip test to restore the environment as it was before the test execution because a newly added feature in the mysql-test framework does check for this. ------------------------------------------------------------------------ r4088 | calvin | 2009-02-03 02:35:56 +0200 (Tue, 03 Feb 2009) | 8 lines branches/zip: fix a compiler error and a warning Both are minor changes: 1) Compiler error introduced in r4072: double ';' at the end. 2) Warning introduced in r3613: \mem\mem0pool.c(481) : warning C4098: 'mem_area_free' : 'void' function returning a value Approved by: Sunny (IM) ------------------------------------------------------------------------ r4098 | marko | 2009-02-03 09:52:45 +0200 (Tue, 03 Feb 2009) | 4 lines branches/zip: mem_area_free(): Correct a bug that was introduced in r4088. free() is not the same as ut_free(). ut_free() pairs with ut_malloc(), not malloc(). free() pairs with malloc() and some other functions. ------------------------------------------------------------------------ r4114 | marko | 2009-02-04 16:09:24 +0200 (Wed, 04 Feb 2009) | 2 lines branches/zip: buf_block_align(): Fix a bogus debug assertion that was introduced in r4036, to address Issue #161. ------------------------------------------------------------------------ r4139 | vasil | 2009-02-09 13:47:16 +0200 (Mon, 09 Feb 2009) | 5 lines branches/zip: Remove mysql-test/patches/bug35261.diff because that bug has been fixed in the MySQL repository. ------------------------------------------------------------------------ r4141 | marko | 2009-02-09 15:35:50 +0200 (Mon, 09 Feb 2009) | 1 line branches/zip: fil_write_lsn_and_arch_no_to_file(): Plug a memory leak. ------------------------------------------------------------------------ r4144 | inaam | 2009-02-10 01:36:25 +0200 (Tue, 10 Feb 2009) | 9 lines branches/zip rb://30 This patch changes the innodb mutexes and rw_locks implementation. On supported platforms it uses GCC builtin atomics. These changes are based on the patch sent by Mark Callaghan of Google under BSD license. More technical discussion can be found at rb://30 Approved by: Heikki ------------------------------------------------------------------------ r4145 | vasil | 2009-02-10 07:34:43 +0200 (Tue, 10 Feb 2009) | 9 lines branches/zip: Non-functional change: Fix a compilation warning introduced in r4144: gcc -DHAVE_CONFIG_H -I. -I../../include -I../../include -I../../include -I../../regex -I../../storage/innobase/include -I../../sql -I. -Werror -Wall -g -MT libinnobase_a-sync0arr.o -MD -MP -MF .deps/libinnobase_a-sync0arr.Tpo -c -o libinnobase_a-sync0arr.o `test -f 'sync/sync0arr.c' || echo './'`sync/sync0arr.c cc1: warnings being treated as errors sync/sync0arr.c: In function 'sync_array_object_signalled': sync/sync0arr.c:869: warning: pointer targets in passing argument 1 of 'os_atomic_increment' differ in signedness ------------------------------------------------------------------------ r4148 | marko | 2009-02-10 10:38:41 +0200 (Tue, 10 Feb 2009) | 12 lines branches/zip: Map ut_malloc(), ut_realloc(), ut_free() to malloc(), realloc(), free() when innodb_use_sys_malloc is set. ut_free_all_mem(): If innodb_use_sys_malloc is set, do nothing, because then ut_mem_block_list_inited will never be set. log_init(): Use mem_alloc() instead of ut_malloc(), so that the memory will be freed. (Tested with Valgrind, although it is not clear why the memory would be freed.) rb://86 approved by Heikki Tuuri and Ken Jacobs. This addresses Issue #168. ------------------------------------------------------------------------ r4149 | marko | 2009-02-10 11:09:15 +0200 (Tue, 10 Feb 2009) | 1 line branches/zip: ChangeLog: Document recent changes. ------------------------------------------------------------------------ r4150 | marko | 2009-02-10 11:51:43 +0200 (Tue, 10 Feb 2009) | 6 lines branches/zip: get_share(), free_share(): Make table locking case sensitive. If lower_case_table_names=1, MySQL will pass the table names in lower case. Thus, we can use a binary comparison (strcmp) in the hash table. rb://87 approved by Heikki Tuuri, to address Bug #41676 and Issue #167. ------------------------------------------------------------------------
-
- 30 Jan, 2009 3 commits
-
-
marko authored
------------------------------------------------------------------------ r4072 | marko | 2009-01-30 23:30:29 +0200 (Fri, 30 Jan 2009) | 32 lines branches/zip: Make innodb_adaptive_hash_index settable. btr_search_disabled: Rename to btr_search_enabled and change the type to char, so that it can be directly linked to the MySQL parameters. Note that the variable is protected by btr_search_latch and btr_search_enabled_mutex, a new mutex introduced in this patch. btr_search_enabled_mutex: A new mutex, to protect btr_search_enabled together with btr_search_latch. buf_pool_drop_hash_index(): New function, to be called from btr_search_disable(). btr_search_disable(), btr_search_enable(): Fix bugs. These functions were previously unused. btr_search_guess_on_hash(), btr_search_build_page_hash_index(): Check btr_search_enabled once more, while holding btr_search_latch. btr_cur_search_to_nth_level(): Note that the reads of btr_search_enabled may be dirty and explain why it should not be a problem. innobase_adaptive_hash_index: Remove. The variable btr_search_enabled will be used directly instead. innodb_adaptive_hash_index_update(): New function, an update callback for innodb_adaptive_hash_index. This will call either btr_search_disable() or btr_search_enable() when the value is assigned. The functions will be called even if the value does not appear to be changed, e.g., when setting from TRUE to TRUE or FALSE to FALSE. rb://85 approved by Heikki Tuuri. This addresses Issue #163. ------------------------------------------------------------------------
-
marko authored
------------------------------------------------------------------------ r4070 | marko | 2009-01-30 12:58:56 +0200 (Fri, 30 Jan 2009) | 6 lines branches/zip: ibuf_use_t: Add the constant IBUF_USE_COUNT, to eliminate a gcc warning about an assertion that trivially holds. The warning was introduced in r4061, in the merge of branches/innodb+ -r4053. ibuf_insert(): Let an assertion fail if ibuf_use is unknown. ------------------------------------------------------------------------
-
marko authored
-
- 29 Jan, 2009 3 commits
-
-
marko authored
------------------------------------------------------------------------ r4061 | marko | 2009-01-29 11:27:09 +0200 (Thu, 29 Jan 2009) | 10 lines branches/zip: Port the applicable parts of r4053 from branches/innodb+: [...] ------------------------------------------------------------------------ In the merge of r4053 to branches/zip, some formatting was corrected and a ChangeLog entry was added. Merge these changes back to innodb+.
-
marko authored
unused label when neither WIN_ASYNC_IO nor LINUX_NATIVE_AIO is defined. Add comments to #endif directives.
-
marko authored
------------------------------------------------------------------------ r4008 | vasil | 2009-01-20 17:01:08 +0200 (Tue, 20 Jan 2009) | 4 lines branches/zip: Add ChangeLog entries for the bugfixes in r4004 and r4005. ------------------------------------------------------------------------ r4027 | marko | 2009-01-23 11:04:49 +0200 (Fri, 23 Jan 2009) | 1 line branches/zip: Remove some redundant #include statements. ------------------------------------------------------------------------ r4028 | marko | 2009-01-23 11:26:10 +0200 (Fri, 23 Jan 2009) | 13 lines branches/zip: Enclose some more unused code in #ifdef UNIV_LOG_ARCHIVE. This will help trim the dependencies of InnoDB Hot Backup. recv_recovery_from_checkpoint_start(): Rename to recv_recovery_from_checkpoint_start_func(), and remove the two first parameters unless UNIV_LOG_ARCHIVE is defined. Define and use the auxiliary macros TYPE_CHECKPOINT and LIMIT_LSN in the function. struct recv_sys_struct: Remove archive_group unless UNIV_LOG_ARCHIVE is defined. Do not define LOG_ARCHIVE unless UNIV_LOG_ARCHIVE is defined. ------------------------------------------------------------------------ r4029 | marko | 2009-01-23 14:07:38 +0200 (Fri, 23 Jan 2009) | 1 line branches/zip: Remove some redundant #include directives. ------------------------------------------------------------------------ r4030 | marko | 2009-01-23 15:31:36 +0200 (Fri, 23 Jan 2009) | 2 lines branches/zip: buf_page_get_gen(): Remove the unused mode BUF_GET_NOWAIT. This was noticed while investigating Issue #160. ------------------------------------------------------------------------ r4033 | marko | 2009-01-23 15:49:04 +0200 (Fri, 23 Jan 2009) | 16 lines branches/zip: Merge revisions 4005:4032 from branches/5.1: ------------------------------------------------------------------------ r4032 | marko | 2009-01-23 15:43:51 +0200 (Fri, 23 Jan 2009) | 10 lines branches/5.1: Merge r4031 from branches/5.0: btr_search_drop_page_hash_when_freed(): Check if buf_page_get_gen() returns NULL. The page may have been evicted from the buffer pool between buf_page_peek_if_search_hashed() and buf_page_get_gen(), because the buffer pool mutex will be released between these two calls. (Bug #42279, Issue #160) rb://82 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ r4034 | marko | 2009-01-26 16:16:39 +0200 (Mon, 26 Jan 2009) | 2 lines branches/zip: buf_page_get_gen(): Fix a "possibly uninitialized" warning that was introduced in r4030. ------------------------------------------------------------------------ r4036 | marko | 2009-01-26 22:33:20 +0200 (Mon, 26 Jan 2009) | 22 lines branches/zip: In r988, the function buf_block_align() was enclosed within UNIV_DEBUG. The two remaining callers in non-debug builds, btr_search_guess_on_hash() and btr_search_validate(), were rewritten to call buf_page_hash_get(). To implement support for a resizeable buffer pool, the function buf_block_align() had been rewritten to perform a page hash lookup in the buffer pool. The caller was also made responsible for holding the buffer pool mutex. Because the page hash lookup is expensive and it has to be done while holding the buffer pool mutex, implement buf_block_align() by pointer arithmetics again, and make btr_search_guess_on_hash() call it. Note that this will have to be adjusted if the interface to the resizeable buffer pool is actually implemented. rb://83 approved by Heikki Tuuri, to address Issue #161. As a deviation from the approved patch, this patch also makes btr_search_validate() (invoked by CHECK TABLE) check that buf_pool->page_hash is consistent with buf_block_align(). ------------------------------------------------------------------------ r4039 | vasil | 2009-01-27 08:04:17 +0200 (Tue, 27 Jan 2009) | 5 lines branches/zip: Adjust the paths in innodb_file_per_table.diff with a recent rename of the test/result files in the MySQL tree. ------------------------------------------------------------------------ r4042 | marko | 2009-01-27 10:05:24 +0200 (Tue, 27 Jan 2009) | 2 lines branches/zip: buf_LRU_invalidate_tablespace(): Fix a race condition: read zip_size while still holding block_mutex. ------------------------------------------------------------------------ r4045 | marko | 2009-01-28 00:31:17 +0200 (Wed, 28 Jan 2009) | 8 lines branches/zip: btr_search_validate(): Fix a bogus UNIV_DEBUG assertion failure that was accidentally introduced in r4036. Instead of calling buf_block_get_frame(), which asserts that the block must be buffer-fixed, access block->frame directly. That is safe, because changes of block->page.state are protected by the buffer pool mutex, which we are holding. This bug was reported by Michael. ------------------------------------------------------------------------ r4046 | marko | 2009-01-28 00:33:20 +0200 (Wed, 28 Jan 2009) | 2 lines branches/zip: Revert the change to univ.i that was accidentally committed in r4045. ------------------------------------------------------------------------ r4047 | marko | 2009-01-28 00:46:13 +0200 (Wed, 28 Jan 2009) | 6 lines branches/zip: btr_search_validate(): Fix an assertion failure that was introduced in r4036. Do not call buf_block_get_space(), buf_block_get_page_no() unless the block state is BUF_BLOCK_FILE_PAGE. This bug was reported by Michael. ------------------------------------------------------------------------ r4050 | vasil | 2009-01-28 08:21:44 +0200 (Wed, 28 Jan 2009) | 5 lines branches/zip: Adjust the paths in innodb_lock_wait_timeout.diff with a recent rename of the test/result files in the MySQL tree. ------------------------------------------------------------------------ r4051 | marko | 2009-01-28 14:35:49 +0200 (Wed, 28 Jan 2009) | 1 line branches/zip: trx0sys.ic: Remove unnecessary #include <data0type.h>. ------------------------------------------------------------------------ r4052 | marko | 2009-01-28 15:21:45 +0200 (Wed, 28 Jan 2009) | 5 lines branches/zip: Enclose some functions inside #ifdef UNIV_HOTBACKUP: ut_sprintf_timestamp_without_extra_chars(), ut_get_year_month_day(), log_reset_first_header_and_checkpoint(): These functions are only used in InnoDB Hot Backup. ------------------------------------------------------------------------ r4056 | calvin | 2009-01-29 03:06:41 +0200 (Thu, 29 Jan 2009) | 33 lines branches/zip: Merge revisions 4032:4035 from branches/5.1 All InnoDB related tests passed on Windows, except known failure in partition_innodb_semi_consistent. The inadvertent change to btr0sea.c in this commit is reverted in r4060. ------------------------------------------------------------------------ r4035 | vasil | 2009-01-26 09:26:25 -0600 (Mon, 26 Jan 2009) | 23 lines branches/5.1: Merge a change from MySQL: ------------------------------------------------------------ revno: 2646.161.4 committer: Tatiana A. Nurnberg <azundris@mysql.com> branch nick: 51-31177v2 timestamp: Mon 2009-01-12 06:32:49 +0100 message: Bug#31177: Server variables can't be set to their current values Bounds-checks and blocksize corrections were applied to user-input, but constants in the server were trusted implicitly. If these values did not actually meet the requirements, the user could not set change a variable, then set it back to the (wonky) factory default or maximum by explicitly specifying it (SET <var>=<value> vs SET <var>=DEFAULT). Now checks also apply to the server's presets. Wonky values and maxima get corrected at startup. Consequently all non-offsetted values the user sees are valid, and users can set the variable to that exact value if they so desire. ------------------------------------------------------------------------ r4060 | marko | 2009-01-29 09:39:04 +0200 (Thu, 29 Jan 2009) | 1 line branches/zip: btr0sea.c: Revert the inadvertent change made in r4056. ------------------------------------------------------------------------
-
- 28 Jan, 2009 1 commit
-
-
marko authored
innodb_change_buffering, with the following values: none - buffer nothing inserts - buffer inserts (like InnoDB so far) deletes - buffer delete-marks changes - buffer inserts and delete-marks purges - buffer delete-marks and deletes all - buffer all operations (insert, delete-mark, delete) The default is 'all'. All values except 'none' and 'inserts' will make InnoDB+ write new-format records to the insert buffer, even for inserts. We will implement this variable in the InnoDB Plugin 1.0.3 with the values 'none' and 'inserts' (the default). This patch also adds a #if 0 TODO snippet for tagging the insert buffer format in the system tablespace. This is related to https://svn.innodb.com/innobase/Saving_last_shutdown_state and Issue #81. rb://79 approved by Heikki Tuuri and Ken Jacobs.
-
- 20 Jan, 2009 1 commit
-
-
marko authored
------------------------------------------------------------------------ r3938 | marko | 2009-01-15 10:28:23 +0200 (Thu, 15 Jan 2009) | 3 lines branches/zip: buf_LRU_invalidate_tablespace(), buf_LRU_free_block(): Add comments and assertions that buf_LRU_block_remove_hashed_page() will release block_mutex when it returns BUF_BLOCK_ZIP_FREE. ------------------------------------------------------------------------ r3939 | marko | 2009-01-15 10:37:51 +0200 (Thu, 15 Jan 2009) | 7 lines branches/zip: buf0lru.c: Improve debug assertions. buf_LRU_block_free_non_file_page(): ut_ad(block) before dereferencing block. buf_LRU_block_remove_hashed_page(): Forbid buf_pool_mutex_exit() while calling buf_buddy_free(). Callers of buf_LRU_block_remove_hashed_page() assume that the buffer pool mutex will not be released and reacquired. ------------------------------------------------------------------------ r3944 | vasil | 2009-01-15 21:15:00 +0200 (Thu, 15 Jan 2009) | 4 lines branches/zip: Add ChangeLog entries for the bug fixes in r3911 and r3930. ------------------------------------------------------------------------ r3958 | marko | 2009-01-16 14:53:40 +0200 (Fri, 16 Jan 2009) | 8 lines branches/zip: Add assertions that the kernel_mutex is being held while accessing table->locks or un_member.tab_lock.locks. This is related to Issue #158. According to static analysis, the added debug assertions should always hold. lock_table_has_to_wait_in_queue(), lock_queue_iterator_reset(), lock_queue_iterator_get_prev(), add_trx_relevant_locks_to_cache(), fetch_data_into_cache(): Add ut_ad(mutex_own(&kernel_mutex)). ------------------------------------------------------------------------ r4006 | marko | 2009-01-20 16:29:22 +0200 (Tue, 20 Jan 2009) | 33 lines branches/zip: Merge revisions 3930:4005 from branches/5.1: ------------------------------------------------------------------------ r4004 | marko | 2009-01-20 16:19:00 +0200 (Tue, 20 Jan 2009) | 12 lines branches/5.1: Merge r4003 from branches/5.0: rec_set_nth_field(): When the field already is SQL null, do nothing when it is being changed to SQL null. (Bug #41571) Normally, MySQL does not pass "do-nothing" updates to the storage engine. When it does and a column of an InnoDB table that is in ROW_FORMAT=COMPACT is being updated from NULL to NULL, the InnoDB buffer pool will be corrupted without this fix. rb://81 approved by Heikki Tuuri ------------------------------------------------------------------------ r4005 | marko | 2009-01-20 16:22:36 +0200 (Tue, 20 Jan 2009) | 8 lines branches/5.1: lock_is_table_exclusive(): Acquire kernel_mutex before accessing table->locks and release kernel_mutex before returning from the function. This fixes a portential race condition in the "commit every 10,000 rows" in ALTER TABLE, CREATE INDEX, DROP INDEX, and OPTIMIZE TABLE. (Bug #42152) rb://80 approved by Heikki Tuuri ------------------------------------------------------------------------
-
- 14 Jan, 2009 2 commits
-
-
marko authored
------------------------------------------------------------------------ r3607 | marko | 2008-12-30 22:33:31 +0200 (Tue, 30 Dec 2008) | 20 lines branches/zip: Remove the dependency on the MySQL HASH table implementation. Use the InnoDB hash table for keeping track of INNOBASE_SHARE objects. struct st_innobase_share: Make table_name const uchar*. Add the member table_name_hash. innobase_open_tables: Change the type from HASH to hash_table_t*. innobase_get_key(): Remove. innobase_fold_name(): New function, for computing the fold value for the InnoDB hash table. get_share(), free_share(): Use the InnoDB hash functions. innobase_end(): Free innobase_open_tables before shutting down InnoDB. Shutting down InnoDB will invalidate all memory allocated via InnoDB. rb://65 approved by Heikki Tuuri. This addresses Issue #104. ------------------------------------------------------------------------ r3608 | marko | 2008-12-30 22:45:04 +0200 (Tue, 30 Dec 2008) | 22 lines branches/zip: When setting the PAGE_LEVEL of a compressed B-tree page from or to 0, compress the page at the same time. This is necessary, because the column information stored on the compressed page will differ between leaf and non-leaf pages. Leaf pages are identified by PAGE_LEVEL=0. This bug was reported as Issue #150. Document the similarity between btr_page_create() and btr_page_empty(). Make the function signature of btr_page_empty() identical with btr_page_create(). (This will add the parameter "level".) btr_root_raise_and_insert(): Replace some code with a call to btr_page_empty(). btr_attach_half_pages(): Assert that the page level has already been set on both block and new_block. Do not set it again. btr_discard_only_page_on_level(): Document that this function is probably never called. Make it work on any height tree. (Tested on 2-high tree by disabling btr_lift_page_up().) rb://68 ------------------------------------------------------------------------ r3612 | marko | 2009-01-02 11:02:44 +0200 (Fri, 02 Jan 2009) | 14 lines branches/zip: Merge c2998 from branches/6.0, so that the same InnoDB Plugin source tree will work both under 5.1 and 6.0. Do not add the test case innodb_ctype_ldml.test, because it would not work under MySQL 5.1. Refuse to create tables whose columns contain collation IDs above 255. This removes an assertion failure that was introduced in WL#4164 (Two-byte collation IDs). create_table_def(): Do not fail an assertion if a column contains a charset-collation ID greater than 256. Instead, issue an error and refuse to create the table. The original change (branches/6.0 r2998) was rb://51 approved by Calvin Sun. ------------------------------------------------------------------------ r3613 | inaam | 2009-01-02 15:10:50 +0200 (Fri, 02 Jan 2009) | 6 lines branches/zip: Implement the parameter innodb_use_sys_malloc (false by default), for disabling InnoDB's internal memory allocator and using system malloc/free instead. rb://62 approved by Marko ------------------------------------------------------------------------ r3614 | marko | 2009-01-02 15:55:12 +0200 (Fri, 02 Jan 2009) | 1 line branches/zip: ChangeLog: Document r3608 and r3613. ------------------------------------------------------------------------ r3615 | marko | 2009-01-02 15:57:51 +0200 (Fri, 02 Jan 2009) | 1 line branches/zip: ChangeLog: Clarify the impact of r3608. ------------------------------------------------------------------------ r3616 | marko | 2009-01-03 00:23:30 +0200 (Sat, 03 Jan 2009) | 1 line branches/zip: srv_suspend_mysql_thread(): Add some clarifying comments. ------------------------------------------------------------------------ r3618 | marko | 2009-01-05 12:54:53 +0200 (Mon, 05 Jan 2009) | 15 lines branches/zip: Merge revisions 3598:3601 from branches/5.1: ------------------------------------------------------------------------ r3601 | marko | 2008-12-22 16:05:19 +0200 (Mon, 22 Dec 2008) | 9 lines branches/5.1: Make SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED a true replacement of SET GLOBAL INNODB_LOCKS_UNSAFE_FOR_BINLOG=1. This fixes an error that was introduced in r370, causing semi-consistent read not to not unlock rows in READ COMMITTED mode. (Bug #41671, Issue #146) rb://67 approved by Heikki Tuuri ------------------------------------------------------------------------ ------------------------------------------------------------------------ r3623 | vasil | 2009-01-06 09:56:32 +0200 (Tue, 06 Jan 2009) | 7 lines branches/zip: Add patch to fix the failing main.variables mysql-test. It started failing after the variable innodb_use_sys_malloc was added because it matches '%alloc%' and the test is badly written and expects that no new variables like that will ever be added. ------------------------------------------------------------------------ r3795 | marko | 2009-01-07 16:17:47 +0200 (Wed, 07 Jan 2009) | 7 lines branches/zip: row_merge_tuple_cmp(): Do not report a duplicate key value if any of the fields are NULL. While the tuples are equal in the sorting order, SQL NULL is defined to be logically inequal to anything else. (Bug #41904) rb://70 approved by Heikki Tuuri ------------------------------------------------------------------------ r3796 | marko | 2009-01-07 16:19:32 +0200 (Wed, 07 Jan 2009) | 1 line branches/zip: Add the tests that were forgotten from r3795. ------------------------------------------------------------------------ r3797 | marko | 2009-01-07 16:22:18 +0200 (Wed, 07 Jan 2009) | 22 lines branches/zip: Do not call trx_allocate_for_mysql() directly, but use helper functions that initialize some members of the transaction struct. (Bug #41680) innobase_trx_init(): New function: initialize some fields of a transaction struct from a MySQL THD object. innobase_trx_allocate(): New function: allocate and initialize a transaction struct. check_trx_exists(): Use the above two functions. ha_innobase::delete_table(), ha_innobase::rename_table(), ha_innobase::add_index(), ha_innobase::final_drop_index(): Use innobase_trx_allocate(). innobase_drop_database(): In the Windows plugin, initialize the trx_t specially, because the THD is not available. Otherwise, use innobase_trx_allocate(). rb://69 accepted by Heikki Tuuri ------------------------------------------------------------------------ r3798 | marko | 2009-01-07 16:42:42 +0200 (Wed, 07 Jan 2009) | 8 lines branches/zip: row_merge_drop_temp_indexes(): Do not lock the rows of SYS_INDEXES when looking for partially created indexes. Use the transaction isolation level READ UNCOMMITTED to avoid interfering with locks held by incomplete transactions that will be rolled back in a subsequent step in the recovery. (Issue #152) Approved by Heikki Tuuri ------------------------------------------------------------------------ r3852 | vasil | 2009-01-08 22:10:10 +0200 (Thu, 08 Jan 2009) | 4 lines branches/zip: Add ChangeLog entries for r3795 r3796 r3797 r3798. ------------------------------------------------------------------------ r3866 | marko | 2009-01-09 15:09:51 +0200 (Fri, 09 Jan 2009) | 2 lines branches/zip: buf_flush_try_page(): Move some common code from each switch case before the switch block. ------------------------------------------------------------------------ r3867 | marko | 2009-01-09 15:13:14 +0200 (Fri, 09 Jan 2009) | 2 lines branches/zip: buf_flush_try_page(): Introduce the variable is_compressed for caching the result of buf_page_get_state(bpage) == BUF_BLOCK_FILE_PAGE. ------------------------------------------------------------------------ r3868 | marko | 2009-01-09 15:40:11 +0200 (Fri, 09 Jan 2009) | 4 lines branches/zip: buf_flush_insert_into_flush_list(), buf_flush_insert_sorted_into_flush_list(): Remove unused code. Change the parameter to buf_block_t* block and assert that block->state == BUF_BLOCK_FILE_PAGE. This is part of Issue #155. ------------------------------------------------------------------------ r3873 | marko | 2009-01-09 22:27:40 +0200 (Fri, 09 Jan 2009) | 17 lines branches/zip: Some non-functional changes related to Issue #155. buf_page_struct: Note that space and offset are also protected by buf_pool_mutex. They are only assigned to by buf_block_set_file_page(). Thus, it suffices for buf_flush_batch() to hold just buf_pool_mutex when checking these fields. buf_flush_try_page(): Rename "locked" to "is_s_latched", per Heikki's request. buf_flush_batch(): Move the common statement mutex_exit(block_mutex) from all if-else if-else branches before the if block. Remove the redundant test (buf_pool->init_flush[flush_type] == FALSE) that was apparently copied from buf_flush_write_complete(). buf_flush_write_block_low(): Note why it is safe not to hold buf_pool_mutex or block_mutex. Enumerate the assumptions in debug assertions. ------------------------------------------------------------------------ r3874 | marko | 2009-01-09 23:09:06 +0200 (Fri, 09 Jan 2009) | 4 lines branches/zip: Add comments related to Issue #155. buf_flush_try_page(): Note why it is safe to access bpage without holding buf_pool_mutex or block_mutex. ------------------------------------------------------------------------ r3875 | marko | 2009-01-09 23:15:12 +0200 (Fri, 09 Jan 2009) | 11 lines branches/zip: Non-functional change: Tighten debug assertions and remove dead code. buf_flush_ready_for_flush(), buf_flush_try_page(): Assert that flush_type is one of BUF_FLUSH_LRU or BUF_FLUSH_LIST. The flush_type comes from buf_flush_batch(), which already asserts this. The assertion holds for all calls in the source code. buf_flush_try_page(): Remove the dead case BUF_FLUSH_SINGLE_PAGE of switch (flush_type). ------------------------------------------------------------------------ r3879 | marko | 2009-01-12 12:46:44 +0200 (Mon, 12 Jan 2009) | 14 lines branches/zip: Simplify the flushing of dirty pages from the buffer pool. buf_flush_try_page(): Rename to buf_flush_page(), and change the return type to void. Replace the parameters space, offset with bpage, and remove the second page hash lookup. Note and assert that both buf_pool_mutex and block_mutex must now be held upon entering the function. They will still be released by this function. buf_flush_try_neighbors(): Replace buf_flush_try_page() with buf_flush_page(). Make the logic easier to follow by not negating the precondition of buf_flush_page(). rb://73 approved by Sunny Bains. This is related to Issue #157. ------------------------------------------------------------------------ r3880 | marko | 2009-01-12 13:24:37 +0200 (Mon, 12 Jan 2009) | 2 lines branches/zip: buf_flush_page(): Fix a comment that should have been fixed in r3879. Spotted by Sunny. ------------------------------------------------------------------------ r3881 | marko | 2009-01-12 14:25:22 +0200 (Mon, 12 Jan 2009) | 2 lines branches/zip: buf_page_get_newest_modification(): Use the block mutex instead of the buffer pool mutex. This is related to Issue #157. ------------------------------------------------------------------------ r3882 | marko | 2009-01-12 14:40:08 +0200 (Mon, 12 Jan 2009) | 3 lines branches/zip: struct mtr_struct: Remove the unused field magic_n unless UNIV_DEBUG is defined. mtr->magic_n is only assigned to and checked in UNIV_DEBUG builds. ------------------------------------------------------------------------ r3883 | marko | 2009-01-12 14:48:59 +0200 (Mon, 12 Jan 2009) | 1 line branches/zip: Non-functional change: Use ut_d when assigning to mtr->state. ------------------------------------------------------------------------ r3884 | marko | 2009-01-12 18:56:11 +0200 (Mon, 12 Jan 2009) | 16 lines branches/zip: Non-functional change: Add some debug assertions and comments. buf_page_t: Note that the LRU fields are protected by buf_pool_mutex only, not block->mutex or buf_pool_zip_mutex. buf_page_get_freed_page_clock(): Note that this is sometimes invoked without mutex protection. buf_pool_get_oldest_modification(): Note that the result may be out of date. buf_page_get_LRU_position(), buf_page_is_old(): Assert that the buffer pool mutex is being held. buf_page_release(): Assert that dirty blocks are in the flush list. ------------------------------------------------------------------------ r3896 | marko | 2009-01-13 09:30:26 +0200 (Tue, 13 Jan 2009) | 2 lines branches/zip: buf_flush_try_neighbors(): Fix a bug that was introduced in r3879 (rb://73). ------------------------------------------------------------------------ r3900 | marko | 2009-01-13 10:32:24 +0200 (Tue, 13 Jan 2009) | 1 line branches/zip: Fix some comments to say buf_pool_mutex. ------------------------------------------------------------------------ r3907 | marko | 2009-01-13 11:54:01 +0200 (Tue, 13 Jan 2009) | 3 lines branches/zip: row_merge_create_temporary_table(): On error, row_create_table_for_mysql() already frees new_table. Do not attempt to free it again. ------------------------------------------------------------------------ r3908 | marko | 2009-01-13 12:34:32 +0200 (Tue, 13 Jan 2009) | 1 line branches/zip: Enable HASH_ASSERT_OWNED independently of UNIV_SYNC_DEBUG. ------------------------------------------------------------------------ r3914 | marko | 2009-01-13 21:46:22 +0200 (Tue, 13 Jan 2009) | 37 lines branches/zip: In hash table lookups, assert that the traversed items satisfy some conditions when UNIV_DEBUG is defined. HASH_SEARCH(): New parameter: ASSERTION. All users will pass an appropriate ut_ad() or nothing. dict_table_add_to_columns(): Assert that the table being added to the data dictionary cache is not already being pointed to by the name_hash and id_hash tables. HASH_SEARCH_ALL(): New macro, for use in dict_table_add_to_columns(). dict_mem_table_free(): Set ut_d(table->cached = FALSE), so that we can check ut_ad(table->cached) when traversing the hash tables, as in HASH_SEARCH(name_hash, dict_sys->table_hash, ...) and HASH_SEARCH(id_hash, dict_sys->table_id_hash, ...). dict_table_get_low(), dict_table_get_on_id_low(): Assert ut_ad(!table || table->cached). fil_space_get_by_id(): Check ut_ad(space->magic_n == FIL_SPACE_MAGIC_N) in HASH_SEARCH(hash, fil_system->spaces, ...). fil_space_get_by_name(): Check ut_ad(space->magic_n == FIL_SPACE_MAGIC_N) in HASH_SEARCH(name_hash, fil_system->name_hash, ...). buf_buddy_block_free(): Check that the blocks are in valid state in HASH_SEARCH(hash, buf_pool->zip_hash, ...). buf_page_hash_get(): Check that the blocks are in valid state in HASH_SEARCH(hash, buf_pool->page_hash, ...). get_share(), free_share(): Check ut_ad(share->use_count > 0) in HASH_SEARCH(table_name_hash, innobase_open_tables, ...). This was posted as rb://75 for tracking down errors similar to Issue #153. ------------------------------------------------------------------------ r3931 | marko | 2009-01-14 16:06:22 +0200 (Wed, 14 Jan 2009) | 26 lines branches/zip: Merge revisions 3601:3930 from branches/5.1: ------------------------------------------------------------------------ r3911 | sunny | 2009-01-13 14:15:24 +0200 (Tue, 13 Jan 2009) | 13 lines branches/5.1: Fix Bug#38187 Error 153 when creating savepoints InnoDB previously treated savepoints as a stack e.g., SAVEPOINT a; SAVEPOINT b; SAVEPOINT c; SAVEPOINT b; <- This would delete b and c. This fix changes the behavior to: SAVEPOINT a; SAVEPOINT b; SAVEPOINT c; SAVEPOINT b; <- Does not delete savepoint c ------------------------------------------------------------------------ r3930 | marko | 2009-01-14 15:51:30 +0200 (Wed, 14 Jan 2009) | 4 lines branches/5.1: dict_load_table(): If dict_load_indexes() fails, invoke dict_table_remove_from_cache() instead of dict_mem_table_free(), so that the data dictionary will not point to freed data. (Bug #42075, Issue #153, rb://76 approved by Heikki Tuuri) ------------------------------------------------------------------------ ------------------------------------------------------------------------
-
-
- 13 Jan, 2009 1 commit
-
-
- 30 Dec, 2008 1 commit
-
-
marko authored
------------------------------------------------------------------------ r3607 | marko | 2008-12-30 22:33:31 +0200 (Tue, 30 Dec 2008) | 20 lines branches/zip: Remove the dependency on the MySQL HASH table implementation. Use the InnoDB hash table for keeping track of INNOBASE_SHARE objects. struct st_innobase_share: Make table_name const uchar*. Add the member table_name_hash. innobase_open_tables: Change the type from HASH to hash_table_t*. innobase_get_key(): Remove. innobase_fold_name(): New function, for computing the fold value for the InnoDB hash table. get_share(), free_share(): Use the InnoDB hash functions. innobase_end(): Free innobase_open_tables before shutting down InnoDB. Shutting down InnoDB will invalidate all memory allocated via InnoDB. rb://65 approved by Heikki Tuuri. This addresses Issue #104. ------------------------------------------------------------------------ r3608 | marko | 2008-12-30 22:45:04 +0200 (Tue, 30 Dec 2008) | 22 lines branches/zip: When setting the PAGE_LEVEL of a compressed B-tree page from or to 0, compress the page at the same time. This is necessary, because the column information stored on the compressed page will differ between leaf and non-leaf pages. Leaf pages are identified by PAGE_LEVEL=0. This bug was reported as Issue #150. Document the similarity between btr_page_create() and btr_page_empty(). Make the function signature of btr_page_empty() identical with btr_page_create(). (This will add the parameter "level".) btr_root_raise_and_insert(): Replace some code with a call to btr_page_empty(). btr_attach_half_pages(): Assert that the page level has already been set on both block and new_block. Do not set it again. btr_discard_only_page_on_level(): Document that this function is probably never called. Make it work on any height tree. (Tested on 2-high tree by disabling btr_lift_page_up().) rb://68 ------------------------------------------------------------------------
-
- 22 Dec, 2008 2 commits
-
-
marko authored
------------------------------------------------------------------------ r3602 | marko | 2008-12-22 16:40:17 +0200 (Mon, 22 Dec 2008) | 6 lines branches/zip: page_cur_insert_rec_zip(): When allocating insert_buf from the free list, zero out the node pointer field of the deleted record if the new record would not overwrite it. This fixes a harmless content mismatch reported by page_zip_validate() that was reported as Issue #147. rb://66 approved by Heikki Tuuri ------------------------------------------------------------------------
-
marko authored
------------------------------------------------------------------------ r3589 | marko | 2008-12-18 15:24:44 +0200 (Thu, 18 Dec 2008) | 2 lines branches/zip: ha_innodb.cc: Do not include some unnecessary MySQL header files. ------------------------------------------------------------------------ r3594 | marko | 2008-12-19 13:58:13 +0200 (Fri, 19 Dec 2008) | 4 lines branches/zip: HASH_INSERT, HASH_DELETE: Add explicit type conversions, so that the macros will expand to valid C++. Unlike C++, C allows implicit type conversions from void* to other pointer types. ------------------------------------------------------------------------ r3597 | marko | 2008-12-22 12:27:16 +0200 (Mon, 22 Dec 2008) | 3 lines branches/zip: Pass the caller's file name and line number to row_mysql_lock_data_dictionary(), row_mysql_freeze_data_dictionary(), to better track down locking issues that involve dict_operation_lock. ------------------------------------------------------------------------ r3599 | marko | 2008-12-22 15:41:47 +0200 (Mon, 22 Dec 2008) | 36 lines branches/zip: Merge revisions 3479:3598 from branches/5.1: ------------------------------------------------------------------------ r3588 | inaam | 2008-12-18 14:26:54 +0200 (Thu, 18 Dec 2008) | 8 lines branches/5.1 It is a bug in unused code. If we don't calculate the hash value when calculating the mutex number then two pages which map to same hash value can get two different mutex numbers. Approved by: Marko ------------------------------------------------------------------------ r3590 | marko | 2008-12-18 15:33:36 +0200 (Thu, 18 Dec 2008) | 11 lines branches/5.1: When converting a record to MySQL format, copy the default column values for columns that are SQL NULL. This addresses failures in row-based replication (Bug #39648). row_prebuilt_t: Add default_rec, for the default values of the columns in MySQL format. row_sel_store_mysql_rec(): Use prebuilt->default_rec instead of padding columns. rb://64 approved by Heikki Tuuri ------------------------------------------------------------------------ r3598 | marko | 2008-12-22 15:28:03 +0200 (Mon, 22 Dec 2008) | 6 lines branches/5.1: ibuf_delete_rec(): When the record cannot be found and the tablespace has been dropped, commit the mini-transaction, so that InnoDB will not hold the insert buffer tree latch in exclusive mode, causing a potential deadlock. This bug was introduced in the fix of Bug #27276 in r2924. ------------------------------------------------------------------------ ------------------------------------------------------------------------
-
- 17 Dec, 2008 1 commit
-
-
marko authored
------------------------------------------------------------------------ r3577 | vasil | 2008-12-17 14:58:26 +0200 (Wed, 17 Dec 2008) | 6 lines branches/zip: Remove 2 entries from the ChangeLog about changes not big enough. Discussed with: Marko ------------------------------------------------------------------------ r3579 | marko | 2008-12-17 22:40:38 +0200 (Wed, 17 Dec 2008) | 3 lines branches/zip: row_sel_try_search_shortcut(), row_sel(): Adjust two debug assertions that should have been adjusted in r3575. ------------------------------------------------------------------------
-
