fails when running with ps-protocol).

The problem was that when running in --ps-protocol mode mysqltest.cc
didn't close created prepared statements. So, the plugins could not be
unistalled because there was a prepared statement using them.

A fix is to add a dummy statement that forces mysqltest.cc to close
the last prepared statement (which uses a plugin-defined table).

When a RPM test build in a non-release branch is done,
the $MYSQL_BINDIR variable ends in "/usr"
(rather than in "/usr/lib" as in a RPM release build),
this made test "file_contents" fail.

A branch for this case is added to the test.
The test result is unchanged.



mysql-test/t/file_contents.test:
  Fight a problem in internal test builds:
  
  When a RPM test build in a non-release branch is done,
  the $MYSQL_BINDIR variable ends in "/usr"
  (rather than in "/usr/lib" as in a RPM release build),
  this made test "file_contents" fail.
  
  Because of this, the old logic did not recognize
  that a RPM build is done (trailing '/' missing!)
  and took the tar.gz branch.
  Just removing the trailing '/' from the "/usr" is
  not enough, as the logic for RPMs used to replace
  "/lib" which is not present at all; rather, a new
  branch was added.
  
  To help in case of future problems, the error messages
  for a failing "open()" now also report "$MYSQL_BINDIR".

Issue:
      SSL_CIPHER set to a specific CIPHER name was not getting picked up by SHOW STATUS Command.

Solution:
      If specific cipher name is specified, avoid overwriting of Cipher List with default Cipher names.


extra/yassl/src/yassl_int.cpp:
  If user specified Cipher name is there, avoid populating default
  cipher names' list.
mysql-test/r/ssl_cipher.result:
  Expected file for ssl_cipher.test test case
mysql-test/t/ssl_cipher-master.opt:
  Server option file for ssl_cipher.test test case.
mysql-test/t/ssl_cipher.test:
  Test case to verify that user specified SSL cipher name is shown in SHOW STATUS Command.

pre-locking list caused by triggers).

The thing is that CREATE TRIGGER / DROP TRIGGER may actually
change pre-locking list of (some) stored routines.

The SP-cache does not detect such changes. Thus if sp_head-instance
is cached in SP-cache, subsequent executions of the cached
sp_head will use inaccurate pre-locking list.

The patch is to invalidate SP-cache on CREATE TRIGGER / DROP TRIGGER.

improved the result file readability.

Before this fix, two performance schema unit tests crashed on windows.

The problem was a missing initialization to PFS_atomics,
which caused the crash only for platform not compiled with native atomics.

This fix adds the missing initialization in the unit tests.
No production code was changed, this is a unit test bug only.

MAP 'REPAIR TABLE' TO RECREATE +ANALYZE FOR ENGINES NOT
SUPPORTING NATIVE REPAIR

Executing 'mysqlcheck --check-upgrade --auto-repair ...' will first issue
'CHECK TABLE FOR UPGRADE' for all tables in the database in order to check if the
tables are compatible with the current version of MySQL. Any tables that are
found incompatible are then upgraded using 'REPAIR TABLE'.

The problem was that some engines (e.g. InnoDB) do not support 'REPAIR TABLE'.
This caused any such tables to be left incompatible. As a result such tables were
not properly fixed by the mysql_upgrade tool.

This patch fixes the problem by first changing 'CHECK TABLE FOR UPGRADE' to return
a different error message if the engine does not support REPAIR. Instead of
"Table upgrade required. Please do "REPAIR TABLE ..." it will report
"Table rebuild required. Please do "ALTER TABLE ... FORCE ..."

Second, the patch changes mysqlcheck to do 'ALTER TABLE ... FORCE' instead of
'REPAIR TABLE' in these cases.

This patch also fixes 'ALTER TABLE ... FORCE' to actually rebuild the table.
This change should be reflected in the documentation. Before this patch,
'ALTER TABLE ... FORCE' was unused (See Bug#11746162)

Test case added to mysqlcheck.test


client/mysqlcheck.c:
  Changed mysqlcheck to do 'ALTER TABLE ... FORCE' if
  'CHECK TABLE FOR UPGRADE' reports ER_TABLE_NEEDS_REBUILD
  and not ER_TABLE_NEEDS_UPGRADE.
mysql-test/r/mysqlcheck.result:
  Added regression test.
mysql-test/std_data/bug47205.frm:
  InnoDB 5.0 FRM which contains a varchar primary key using
  utf8_general_ci. This is an incompatible FRM for 5.5.
mysql-test/t/mysqlcheck.test:
  Added regression test.
sql/handler.h:
  Added new HA_CAN_REPAIR flag.
sql/share/errmsg-utf8.txt:
  Added new error message ER_TABLE_NEEDS_REBUILD
sql/sql_admin.cc:
  Changed 'CHECK TABLE FOR UPDATE' to give ER_TABLE_NEEDS_REBUILD
  instead of ER_TABLE_NEEDS_UPGRADE if the engine does not support
  REPAIR (as indicated by the new HA_CAN_REPAIR flag).
sql/sql_lex.h:
  Remove unused ALTER_FORCE flag.
sql/sql_yacc.yy:
  Make sure ALTER TABLE ... FORCE recreates the table
  by setting the ALTER_RECREATE flag as the ALTER_FORCE
  flag was unused.
storage/archive/ha_archive.h:
  Added new HA_CAN_REPAIR flag to Archive
storage/csv/ha_tina.h:
  Added new HA_CAN_REPAIR flag to CSV
storage/federated/ha_federated.h:
  Added new HA_CAN_REPAIR flag to Federated
storage/myisam/ha_myisam.cc:
  Added new HA_CAN_REPAIR flag to MyISAM

              NON-PRIMARY UNIQUE INDEX USING INNODB

This patch adds the HA_INPLACE_ADD_UNIQUE_INDEX_NO_WRITE
capability flag to InnoDB, indicating that concurrent reads
can be allowed while non-primary unique indexes are created.

This is an follow-up to Bug #11751388 which enabled concurrent
reads when creating non-primary non-unique indexes.

Test case added to innodb_mysql_sync.test.

FLUSH TABLES under FLUSH TABLES <list> WITH READ LOCK leads 
to assert failure.

This assert was triggered if a statement tried up upgrade a metadata
lock with an active FLUSH TABLE <list> WITH READ LOCK. The assert 
checks that the connection already holds a global intention exclusive
metadata lock. However, FLUSH TABLE <list> WITH READ LOCK does not
acquire this lock in order to be compatible with FLUSH TABLES WITH
READ LOCK. Therefore any metadata lock upgrade caused the assert to
be triggered.

This patch fixes the problem by preventing metadata lock upgrade
if the connection has an active FLUSH TABLE <list> WITH READ LOCK.
ER_TABLE_NOT_LOCKED_FOR_WRITE will instead be reported to the client.

Test case added to flush.test.

  @ mysql-test/r/ctype_latin1.result
  @ mysql-test/r/ctype_utf8.result
  @ mysql-test/t/ctype_latin1.test
  @ mysql-test/t/ctype_utf8.test
  Adding tests

  @ sql/mysqld.h
  @ sql/item.cc
  @ sql/sql_parse.cc
  @ sql/sql_view.cc

  Refactoring (thanks to Guilhem for the idea):

  Item_string::print() was hard to understand because of the different
  QT_ constants: in "query_type==QT_x", QT_x is explicitely included
  but the other two QT_ are implicitely excluded. The combinations
  with '||' and '&&' make this even harder.
  - logic is now more "explicit" by changing QT_ constants to a bitmap of flags:
    QT_ORDINARY: no change,
    QT_IS -> QT_TO_SYSTEM_CHARSET | QT_WITHOUT_INTRODUCERS,
    QT_EXPLAIN -> QT_TO_SYSTEM_CHARSET
    (QT_EXPLAIN was introduced in the first version of the Bug#57341 patch)
  - Item_string::print() is rewritten using those flags

  Bugfix itself:

  When QT_TO_SYSTEM_CHARSET is used alone (with no QT_WITHOUT_INTRODUCERS),
  we print string literals as follows:

  - display introducers if they were in the original query
  - print ASCII characters as is
  - print non-ASCII characters using hex-escape
  Note: as "EXPLAIN" output is only for human readability purposes
  and does not need to be a pasrable SQL, so using hex-escape is Ok.
  ErrConvString class perfectly suites for hex escaping purposes.

               CLIENT CONFIGURATION.

At startup, MySQL server/client programs do not read
configuration file pointed by MYSQL_HOME environment
variable.

This happened as, this environment variable was
handled by a different variable (DEFAULT_HOME_ENV)
in the code, which was ne'er initialized.

Fixed by changing it to MYSQL_HOME.


mysys/default.c:
  BUG 11766219 : 59280: $MYSQL_HOME IS NOT USED FOR THE
                 CLIENT CONFIGURATION.
  
  In the current build environment, the variable
  DEFAULT_HOME_ENV is no more found being initialized
  to MYSQL_HOME (as was the case earlier). Changed the
  variable name to MYSQL_HOME.

              from 5.1 to 5.5

(Former 59405)

In this bug, args[0] in an Item_func_find_in_set stored an 
Item_func_weekday that was constant. In 
Item_func_find_in_set::fix_length_and_dec(), args[0]->val_str() 
was called. Later, when Item_func_find_in_set::val_int() was 
called, args[0]->null_value was checked. However, the 
Item_func_weekday in args[0] had now been replaced with an 
Item_cache. No val_*() calls had been made to this Item_cache,
thus null_value was incorrectly 'true', resulting in missing 
rows in the result set.

enum_value gets a value in fix_length_and_dec() iff args[0]
is both constant and non-null. It is therefore unnecessary 
to check the null_value of args[0] in val_int().

An alternative fix would be to call args[0]->val_int() inside 
Item_func_find_in_set::val_int(). This would ensure
args[0]->null_value was set correctly (always false in this case), 
but that would have to be done for every record this const value 
is checked against.


mysql-test/r/func_set.result:
  Add test for BUG#59405
mysql-test/t/func_set.test:
  Add test for BUG#59405

Part 2. Function QUOTE() was not multi-byte safe.

  @ mysql-test/r/ctype_ucs.result
  @ mysql-test/t/ctype_ucs.test
  Adding tests

  @ sql/item_strfunc.cc
  Fixing Item_func_quote::val_str to be multi-byte safe.

  @ sql/item_strfunc.h
  Multiple size needed for quote characters to mbmaxlen