NUMBER ALREADY USED BY 5.6

The problem was that the patch for Bug#13004581 added a new error
message to 5.5. This causes it to use an error number already used
in 5.6 by ER_CANNOT_LOAD_FROM_TABLE_V2. Which means that error
message number stability between GA releases is broken.

This patch fixes the problem by removing the error message and
using ER_UNKNOWN_ERROR instead.

Bug #16754901 PARS_INFO_FREE NOT CALLED IN DICT_CREATE_ADD_FOREIGN_TO_DICTIONARY

Merging the fix from mysql-5.5 to mysql-5.5.32-release.

The problem was that if UPDATE with subselect caused a
deadlock inside InnoDB, this deadlock was not properly
handled by the SQL layer. This meant that the SQL layer
would try to unlock the row after InnoDB had rolled
back the transaction. This caused an assertion inside
InnoDB.

This patch fixes the problem by checking for errors
reported by SQL_SELECT::skip_record() and not calling
unlock_row() if any errors have been reported.
  
This bug is similar to Bug#13586591, but for UPDATE
rather than DELETE. Similar issues in filesort/opt_range/
sql_select will be investigated and handled in the scope
of Bug#16767929

No commit message

eliminate a race condition over recv_sys->n_addrs which might result in a database corruption
in recovery, without reporting a recovery error.

recv_recover_page_func(): move the code segment that decrements recv_sys->n_addrs
  to the end of the function, after the call to mtr_commit()

rb://2282 approved by Inaam

GROUP BY, MYISAM 

Merge fix for Bug#16222245 from mysql-5.1 to mysql-5.5

GROUP BY, MYISAM 

Problem:-
In a query, where we are using loose index scan optimization and 
we have MIN() causes segmentation fault(where table row length 
is less then key_length).

Analysis:

While using loose index scan for MIN(), we call key_copy(), to copy 
the key data from record.
This function is using temporary record buffer to store key data 
from the record buffer.But in case where the key length is greater 
then the buffer length, this will cause a segmentation fault.


Solution:
Give a proper buffer to store a key record.

After a clean shutdown, InnoDB will not check the *.ibd file headers,
for maximum performance. This is unchanged before and after this
patch.

What this fix addresses is the case when crash recovery is
needed. Previously, InnoDB could load a corrupted tablespace file.

buf_page_is_corrupted(): Add the parameter check_lsn.

fil_check_first_page(): New function, to perform a consistency check
on the first page of a file. This can be overridden by setting
innodb_force_recovery.

fil_read_first_page(), fil_open_single_table_tablespace(),
fil_load_single_table_tablespace(): Invoke fil_check_first_page().

open_or_create_data_files(): Check the status of
fil_open_single_table_tablespace().

rb#2352 approved by Jimmy Yang

  
When logging to the binary log in row, updates and deletes to a BLACKHOLE
engine table are skipped.
  
It is impossible to log binary log in row format for updates and deletes to
a BLACKHOLE engine table, as no row events can be generated in these cases.
After fix, generate a warning for UPDATE/DELETE statements that modify a
BLACKHOLE table, as row events are not logged in row format.

SINGLE DATABASE; MYSQLBINLOG
      
Problem: If last subevent inside a RBR event
is skipped while replaying a binary log
using mysqlbinlog with --database=... option,
generated output is missing end marker('/*!*/;)
for that RBR event. Thence causing syntax error
while replaying the generated output.
      
Fix: Append end marker ('/*!*/;) if the last 
subevent is getting skipped.
Append end marker if the last 
subevent is getting skipped.

      MYSQL_READ_DEFAULT_FILE
Parsing of the plugin-dir config file option was not working due to a typo.
Fixed the typo. No test case can be added due to lack of support for 
defaults-exitra-file testing in mysql-test-run.pl.
Thanks to Sinisa for contributing the fix.

No commit message

No commit message

OPENING MISSING PARTITION

In the ha_innobase::open() call, for normal tables, there is no retry logic.
But for partitioned tables, there is a retry logic introduced as fix for:

http://bugs.mysql.com/bug.php?id=33349  
https://support.mysql.com/view.php?id=21080

The Bug#33349, does not provide sufficient information to analyze the original
problem.  The original problem reported by bug#33349 is also minor (just an
annoyance and no loss of functionality).  Most importantly, the retry logic
has been introduced without any associated test case.

So we are removing the retry logic for partitioned tables.  When the original
problem occurs, a different solution will be explored.

Problem:
In query like
select 1 from .. order by match .. against ...;
causes a debug assert failue.

Analysis:
In union type query like

(select * from order by a) order by b;
or
(select * from order by a) union (select * from order by b);

We skip resolving of order by a for 1st query and order by of a and b in 
2nd query.


This means that, in case when our order by have Item_func_match class, 
we skip resolving it.
But we maintain a ft_func_list and at the time of optimization, when we 
Perform FULLTEXT search before all regular searches on the bases of the 
list we call Item_func_match::init_search() which will cause debug assert 
as the item is not resolved.


Solution:
We will skip execution if the item is not fixed and we will not 
fix index(Item_func_match::fix_index()) for which 
Item_func_match::fix_field() is not called so that on later changes 
we can check the dependency on fix field.
bz

Problem:
In query like
select 1 from .. order by match .. against ...;
causes a debug assert failue.

Analysis:
In union type query like

(select * from order by a) order by b;
or
(select * from order by a) union (select * from order by b);

We skip resolving of order by a for 1st query and order by of a and b in 
2nd query.


This means that, in case when our order by have Item_func_match class, 
we skip resolving it.
But we maintain a ft_func_list and at the time of optimization, when we 
Perform FULLTEXT search before all regular searches on the bases of the 
list we call Item_func_match::init_search() which will cause debug assert 
as the item is not resolved.


Solution:
We will skip execution if the item is not fixed and we will not 
fix index(Item_func_match::fix_index()) for which 
Item_func_match::fix_field() is not called so that on later changes 
we can check the dependency on fix field.

Zero out the entire struct, rather than the first sizeof(void*) bytes.

             !TABLES->NEXT_NAME_RESOLUTION_TABLE) || !TAB
      
Problem:
The context info of select query gets corrupted when a query
with group_concat having order by is present in an order by
clause of the select query. As a result, server crashes with
an assert.
      
Analysis:
While parsing order by for group_concat, it is presumed that
it is always present before the actual order by for the
select query.
As a result, parser uses select->order_list to populate the
order by items of group_concat and creates a select->gorder_list
to which select->order_list is copied onto. Once this is done,
it empties the select->order_list.
In the case presented in the bugpage, as order by is already
parsed when group_concat's order by is encountered, parser
presumes that it is the second order by in the select query
and creates fake_lex_unit which results in the change of
context info.
      
Solution:
Make group_concat's order by parsing independent of the select

WITH A PORT NUMBER ENCLOSED IN QUOTES

Problem: mysqldump --dump-slave --include-master-host-port
prints the CHANGE MASTER command in the generated logical
backup. The PORT number that is generated with this command
is a string and should be an integer.

Fix: Remove the Enclosed quotes for port number.

              PARTIAL INDEX

Consider the following table definition:

CREATE TABLE t (
  my_col CHAR(10),
  ...
  INDEX my_idx (my_col(1))
)

The my_idx index is not able to distinguish between rows with
equal first-character my_col-values (e.g. "f", "foo", "fee").

Prior to this CS, the range optimizer would translate

"WHERE my_col NOT IN ('f', 'h')" into (optimizer trace syntax)

"ranges": [
  "NULL < my_col < f",
  "f < my_col"
]

But this was not correct because the rows with values "foo" 
and "fee" would not belong to any of those ranges. However, the
predicate "my_col != 'f' AND my_col != 'h'" would translate
to 

"ranges": [
  "NULL < my_col"
]

because get_mm_leaf() changes from "<" to "<=" for partial
keyparts. This CS changes the range optimizer implementation 
for NOT IN to behave like a conjunction of NOT EQUAL: it 
replaces "<" with "<=" for all but the first range when the
keypart is partial.

Solution:Set diff_time to 0 if finish_time < start_time

Add execute bit for scripts:
 - in build directory
 - in install directory

DESCRIPTION AND FIX:
DBUG_EXPLAIN result in buffer overflow when the
DEBUG variable values length exceed 255.
In _db_explain_ function which call macro str_to_buf
incorrectly passes the length of buf avaliable to
strnmov as len+1. The fix calculates the avaliable
space in buf and passes it to strnxmov.

No commit message