------------------------------------------------------------------------
  r3601 | marko | 2008-12-22 16:05:19 +0200 (Mon, 22 Dec 2008) | 9 lines

  branches/5.1: Make
  SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED
  a true replacement of SET GLOBAL INNODB_LOCKS_UNSAFE_FOR_BINLOG=1.
  This fixes an error that was introduced in r370, causing
  semi-consistent read not to not unlock rows in READ COMMITTED mode.
  (Bug #41671, Issue #146)

  rb://67 approved by Heikki Tuuri
  ------------------------------------------------------------------------

(false by default), for disabling InnoDB's internal memory allocator
and using system malloc/free instead.

rb://62 approved by Marko

source tree will work both under 5.1 and 6.0.  Do not add the test case
innodb_ctype_ldml.test, because it would not work under MySQL 5.1.

Refuse to create tables whose columns contain collation IDs above 255.
This removes an assertion failure that was introduced in WL#4164
(Two-byte collation IDs).

create_table_def(): Do not fail an assertion if a column contains a
charset-collation ID greater than 256. Instead, issue an error and
refuse to create the table.

The original change (branches/6.0 r2998) was rb://51 approved by Calvin Sun.

from or to 0, compress the page at the same time.  This is necessary,
because the column information stored on the compressed page will
differ between leaf and non-leaf pages.  Leaf pages are identified by
PAGE_LEVEL=0.  This bug was reported as Issue #150.

Document the similarity between btr_page_create() and
btr_page_empty().  Make the function signature of btr_page_empty()
identical with btr_page_create().  (This will add the parameter "level".)

btr_root_raise_and_insert(): Replace some code with a call to
btr_page_empty().

btr_attach_half_pages(): Assert that the page level has already been
set on both block and new_block.  Do not set it again.

btr_discard_only_page_on_level(): Document that this function is
probably never called.  Make it work on any height tree.  (Tested on
2-high tree by disabling btr_lift_page_up().)

rb://68

Use the InnoDB hash table for keeping track of INNOBASE_SHARE objects.

struct st_innobase_share: Make table_name const uchar*.  Add the member
table_name_hash.

innobase_open_tables: Change the type from HASH to hash_table_t*.

innobase_get_key(): Remove.

innobase_fold_name(): New function, for computing the fold value for the
InnoDB hash table.

get_share(), free_share(): Use the InnoDB hash functions.

innobase_end(): Free innobase_open_tables before shutting down InnoDB.
Shutting down InnoDB will invalidate all memory allocated via InnoDB.

rb://65 approved by Heikki Tuuri.  This addresses Issue #104.

the free list, zero out the node pointer field of the deleted record if
the new record would not overwrite it.  This fixes a harmless content
mismatch reported by page_zip_validate() that was reported as Issue #147.

rb://66 approved by Heikki Tuuri

  ------------------------------------------------------------------------
  r3588 | inaam | 2008-12-18 14:26:54 +0200 (Thu, 18 Dec 2008) | 8 lines

  branches/5.1

  It is a bug in unused code. If we don't calculate the hash value when
  calculating the mutex number then two pages which map to same hash
  value can get two different mutex numbers.

  Approved by: Marko
  ------------------------------------------------------------------------
  r3590 | marko | 2008-12-18 15:33:36 +0200 (Thu, 18 Dec 2008) | 11 lines

  branches/5.1: When converting a record to MySQL format, copy the default
  column values for columns that are SQL NULL.  This addresses failures in
  row-based replication (Bug #39648).

  row_prebuilt_t: Add default_rec, for the default values of the columns in
  MySQL format.

  row_sel_store_mysql_rec(): Use prebuilt->default_rec instead of
  padding columns.

  rb://64 approved by Heikki Tuuri
  ------------------------------------------------------------------------
  r3598 | marko | 2008-12-22 15:28:03 +0200 (Mon, 22 Dec 2008) | 6 lines

  branches/5.1: ibuf_delete_rec(): When the record cannot be found and
  the tablespace has been dropped, commit the mini-transaction, so that
  InnoDB will not hold the insert buffer tree latch in exclusive mode,
  causing a potential deadlock.  This bug was introduced in the fix of
  Bug #27276 in r2924.
  ------------------------------------------------------------------------

row_mysql_lock_data_dictionary(), row_mysql_freeze_data_dictionary(),
to better track down locking issues that involve dict_operation_lock.

so that the macros will expand to valid C++.  Unlike C++, C allows
implicit type conversions from void* to other pointer types.

debug assertions that should have been adjusted in r3575.

Remove 2 entries from the ChangeLog about changes not big enough.

Discussed with:	Marko

interpreter.  It was only used for updating the InnoDB internal data
dictionary when renaming or dropping tables.  It could have caused
deadlocks after acquiring latches on insert buffer bitmap pages.
This and r3544 should fix Issue #135.

Furthermore, the update-in-place-in-select does not account for
compression failure.  That was not a problem yet, since the InnoDB SQL
interpreter has so far assumed ROW_FORMAT=REDUNDANT.

rb://63 approved by Heikki Tuuri

InnoDB Plugin 1.0.2, except changes to source code comments.

index without enabling UNIV_DEBUG.

when inserting or deleting from the insert buffer B-tree.  Assert that
records in the insert buffer B-tree are never updated.  This could cure
Issue #135.

btr_cur_optimistic_insert(): Do not update the insert buffer bitmap
when inserting to the insert buffer tree.

btr_cur_optimistic_delete(): Do not update the insert buffer bitmap
when deleting from the insert buffer tree.  This could be the cause
of the assertion failure that was reported in Issue #135.

btr_cur_update_alloc_zip(): Assert that the index is not the insert
buffer.  The insert buffer will never be stored in compressed format.

btr_cur_update_in_place(), btr_cur_optimistic_update(),
btr_cur_pessimistic_update(): Assert that these functions are never
invoked on the insert buffer tree.  The insert buffer only supports
the insertion and deletion of records.

must be latched before calling mtr_commit(mtr) if the function returns TRUE.

assertion about SYNC_BUF_POOL and SYNC_BUF_BLOCK.

Originally, there were provisions in InnoDB for multiple insert buffer
B-trees, apparently one for each tablespace.

When Heikki implemented innodb_file_per_table (multiple InnoDB
tablespaces) in MySQL 4.1, he made the insert buffer live only in the
system tablespace (space 0) but left the provisions in the code.

When Osku Salerma implemented delete buffering, he also cleaned up the
insert buffer subsystem so that only one insert buffer B-tree exists.
This patch applies the clean-up to the InnoDB Plugin.

Having a separate patch of the insert buffer clean-up should help us
better compare the essential changes of the InnoDB Plugin and InnoDB+
and to track down bugs that are specific to InnoDB+.

IBUF_SPACE_ID: New constant, defined as 0.

ibuf_data_t: Remove.

ibuf_t: Add the applicable fields from ibuf_data_t.  There is only one
insert buffer tree from now on.

ibuf_page_low(), ibuf_page(): Merge to a single function ibuf_page().

fil_space_t: Remove ibuf_data.

fil_space_get_ibuf_data(): Remove.  There is only one ibuf_data, for
space IBUF_SPACE_ID.

fil_ibuf_init_at_db_start(): Remove.

ibuf_init_at_db_start(): Fuse with ibuf_data_init_for_space().

ibuf_validate_low(): Remove.  There is only one ibuf tree.

ibuf_free_excess_pages(), ibuf_header_page_get(),
ibuf_free_excess_pages(): Remove the parameter space, which was always
0.

ibuf_tree_root_get(): Remove the parameters space and data.  There is
only one ibuf tree, for space IBUF_SPACE_ID.

ibuf_data_sizes_update(): Rename to ibuf_size_update(), and remove the
parameter data.  There is only one ibuf data struct.

ibuf_build_entry_pre_4_1_x(): New function, refactored from
ibuf_build_entry_from_ibuf_rec().

ibuf_data_enough_free_for_insert(), ibuf_data_too_much_free(): Remove
the parameter data.  There is only one insert buffer tree.

ibuf_add_free_page(), ibuf_remove_free_page(): Remove the parameters
space and data.  There is only one insert buffer tree.

ibuf_get_merge_page_nos(): Add parenthesis, to reduce diffs to
branches/innodb+.

ibuf_contract_ext(): Do not pick an insert buffer tree at random.
There is only one.

ibuf_print(): Print the single insert buffer tree.

rb://19 approved by Heikki on IM

Make the variables rw_latch and buf_mode local in the for loop.
Initialize them at the beginning of each for loop round to reduce
register spilling on register-starved platforms such as the x86.  Move
the assignment of rw_latch and buf_mode from the end of the loop to
the beginning of the loop.  These parameters will only be needed in
the buf_page_get_gen() call at the start of the loop.

Remove the second (redundant) call to ibuf_should_try().

ibuf_should_try(): Now that the successful calls to this function will
be halved, halve the magic constant that ibuf_flush_count will be
compared to, accordingly.

rb://61 approved by Heikki over IM.

for (rw_latch != RW_NO_LATCH) around debug code.

redundant checks for ibuf_fixed_addr_page() || fsp_descr_page() that
were removed in r3432, and add a comment explaining why.

Thanks to Michael for reporting this bug.

innodb_buffer_pool_size >= 4096M on x64 Windows

All three srv_buf_pool related variables are defined as ulong, which is
32-bit on 64-bit Windows. They are changed to 64-bit ulint. Also
system_info.dwPageSize appears to be 32-bit only. Casting to 64-bit
is required.

Approved by:	Marko (on IM)

The patch utility takes LF style diff, and mysql-test-run 
also only takes LF style, even on Windows.

  ------------------------------------------------------------------------
  r3479 | calvin | 2008-12-10 15:30:05 -0600 (Wed, 10 Dec 2008) | 4 lines
  
  branches/5.1: change .result file eol-style to LF
  
  mysql-test-run only takes LF style even on Windows.
  
  ------------------------------------------------------------------------

Merge 2929:3458 from branches/5.1 (resolving conflict in c3257,
note also that r3363 reverted r2933 so there are not changes in
mysql-test/innodb-autoinc.result with the current merge):

  ------------------------------------------------------------------------
  r2933 | calvin | 2008-10-30 02:57:31 +0200 (Thu, 30 Oct 2008) | 10 lines
  Changed paths:
     M /branches/5.1/mysql-test/innodb-autoinc.result
  
  branches/5.1: correct the result file innodb-autoinc.result
  
  Change the followings:
    auto_increment_increment
    auto_increment_offset
  
  to
    auto-increment-increment
    auto-increment-offset
  
  ------------------------------------------------------------------------
  r2981 | marko | 2008-11-07 14:54:10 +0200 (Fri, 07 Nov 2008) | 5 lines
  Changed paths:
     M /branches/5.1/row/row0mysql.c
  
  branches/5.0: row_mysql_store_col_in_innobase_format(): Correct a misleading
  comment. In the UTF-8 encoding, ASCII takes 1 byte per character, while
  the "latin1" character set (normally ISO-8859-1, but in MySQL it actually
  refers to the Windows Code Page 1252 a.k.a. CP1252, WinLatin1)
  takes 1 to 3 bytes (1 to 2 bytes for the ISO-8859-1 subset).
  ------------------------------------------------------------------------
  r3114 | calvin | 2008-11-14 20:31:48 +0200 (Fri, 14 Nov 2008) | 8 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
  
  branches/5.1: fix bug#40386: Not flushing query cache after truncate
  
  ha_statistics.records can not be 0 unless the table is empty, set to
  1 instead. The original problem of bug#29507 is fixed in the server.
  
  Additional test was done with the fix of bug#29507 in the server.
  
  Approved by: Heikki (on IM)
  ------------------------------------------------------------------------
  r3257 | inaam | 2008-11-24 22:06:50 +0200 (Mon, 24 Nov 2008) | 13 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/srv/srv0srv.c
     M /branches/5.1/trx/trx0trx.c
  
  branches/5.1 bug#40760
  
  The config param innodb_thread_concurrency is dynamically set and is
  read when a thread enters/exits innodb. If the value is changed between
  the enter and exit time the behaviour becomes erratic.
  The fix is not to use srv_thread_concurrency when exiting, instead use
  the flag trx->declared_to_be_inside_innodb.
  
  rb://57
  
  Approved by: Marko
  
  
  ------------------------------------------------------------------------
  r3363 | calvin | 2008-12-04 19:00:20 +0200 (Thu, 04 Dec 2008) | 13 lines
  Changed paths:
     M /branches/5.1/mysql-test/innodb-autoinc.result
  
  branches/5.1: revert the changes in r2933
  
  The changes in r2933 causes test failure on Linux.
  More investigation is needed for Windows.
  
  Change the followings in innodb-autoinc.result:
    auto-increment-increment
    auto-increment-offset
  
  back to:
    auto_increment_increment
    auto_increment_offset
  
  ------------------------------------------------------------------------
  r3412 | vasil | 2008-12-05 10:46:18 +0200 (Fri, 05 Dec 2008) | 7 lines
  Changed paths:
     M /branches/5.1/trx/trx0undo.c
  
  branches/5.1:
  
  Add the traditional 2 spaces after the timestamp so the message does
  not look like:
  
  070223 13:26:01InnoDB: Warning: canno....
  
  ------------------------------------------------------------------------
  r3458 | vasil | 2008-12-09 11:21:08 +0200 (Tue, 09 Dec 2008) | 51 lines
  Changed paths:
     M /branches/5.1/mysql-test/innodb_bug34300.test
  
  branches/5.1:
  
  Merge a change from MySQL to fix the failing innodb_bug34300 mysql-test:
  
    main.innodb_bug34300           [ fail ]
    
    mysqltest: At line 11: query 'SET @@max_allowed_packet=16777216' failed: 1621: SESSION variable 'max_allowed_packet' is read-only. Use SET GLOBAL to assign the value
    
    Aborting: main.innodb_bug34300 failed in default mode. 
  
  The changeset is this:
  
    ------------------------------------------------------------
    revno: 2709.1.10
    committer: Staale Smedseng <staale.smedseng@sun.com>
    branch nick: b22891-51-bugteam
    timestamp: Thu 2008-11-20 08:51:48 +0100
    message:
      A fix for Bug#22891 "session level max_allowed_packet can be
      set but is ignored".
    
      This patch makes @@session.max_allowed_packed and
      @@session.net_buffer_length read-only as suggested in the bug
      report. The user will have to use SET GLOBAL (and reconnect)
      to alter the session values of these variables.
    
      The error string ER_VARIABLE_IS_READONLY is introduced.
    
      Tests are modified accordingly.
    modified:
      mysql-test/r/func_compress.result
      mysql-test/r/max_allowed_packet_basic.result
      mysql-test/r/max_allowed_packet_func.result
      mysql-test/r/net_buffer_length_basic.result
      mysql-test/r/packet.result
      mysql-test/r/union.result
      mysql-test/r/variables.result
      mysql-test/t/func_compress.test
      mysql-test/t/innodb_bug34300.test
      mysql-test/t/max_allowed_packet_basic.test
      mysql-test/t/max_allowed_packet_func.test
      mysql-test/t/net_buffer_length_basic.test
      mysql-test/t/packet.test
      mysql-test/t/union.test
      mysql-test/t/variables.test
      sql/set_var.cc
      sql/set_var.h
      sql/share/errmsg.txt
    ------------------------------------------------------------
  
  
  ------------------------------------------------------------------------

from the stack, not with mem_alloc().

checks for ibuf_fixed_addr_page() || fsp_descr_page().  The one at
the beginning of the function is enough.

complain if the record is not found.  Explain that this is possible
when a deadlock occurs during an update.  Heikki investigated this
in Issue #134.

Revert our temporary fix for Bug#40360 Binlog related errors with binlog off

This bug was fixed in MySQL code.

Our fix went into r2944 and r2947, but this patch does not entirely revert
those revisions because we want to leave the test case that was introduced
and also r2944 itself reverted r2935 and r2936. So if we completely revert
r2944 and r2947 then we would loose the test and will restore r2935 and
r2936.

This resolves Issue#108 We should remove ib_bin_log_is_engaged() once mysql
add an equivallent, see Bug#40360

Fix Mantis issue#103 mysql_addons.c depends on THD internals - please remove it

Use MySQL's thd_get_thread_id() instead of our own ib_thd_get_thread_id()
since MySQL implemented the former, see http://bugs.mysql.com/30930.

Approved by:	Marko (https://svn.innodb.com/rb/r/40, rb://40)

Resurrect a ChangeLog entry that I removed in c3331 with a fake date
so it does not appear that it has been included in 1.0.2.

Now that 1.0.2 is out, the current tree is version 1.0.3.

Remove an entry from the ChnageLog for a change that was made before
the release of 1.0.2 but was not included in that release.

Add entry in the ChangeLog for the release of 1.0.2.

from the free list, zero out the DB_TRX_ID and DB_ROLL_PTR of the
deleted record if the new record would not overwrite these
fields. This fixes a harmless content mismatch reported by
page_zip_validate() that was reported as Issue #111.
rb://55 approved by Sunny Bains.