Fixing minor error when printing SQL types from master and cleaning some code.

Updating result files.

Row-based replication requires the types of columns on the
master and slave to be approximately the same (some safe
conversions between strings are allowed), but does not
allow safe conversions between fields of similar types such
as TINYINT and INT.

This patch implement type conversions between similar fields
on the master and slave.

The conversions are controlled using a new variable
SLAVE_TYPE_CONVERSIONS of type SET('ALL_LOSSY','ALL_NON_LOSSY').

Non-lossy conversions are any conversions that do not run the
risk of losing any information, while lossy conversions can
potentially truncate the value. The column definitions are
checked to decide if the conversion is acceptable.

If neither conversion is enabled, it is required that the
definitions of the columns are identical on master and slave.

Conversion is done by creating an internal conversion table,
unpacking the master data into it, and then copy the data to
the real table on the slave.

.bzrignore:
  New files added
client/Makefile.am:
  New files added
client/mysqlbinlog.cc:
  Functions in rpl_utility.cc is now needed by mysqlbinlog.cc.
libmysqld/Makefile.am:
  New files added
mysql-test/extra/rpl_tests/check_type.inc:
  Test include file to check a single type conversion.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
  Switching to use INT instead of TEXT for column that should not have matching types.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
  Adding code to enable type conversions for BIT tests since InnoDB
  cannot handle them properly due to incorrect information stored as
  metadata.
mysql-test/extra/rpl_tests/type_conversions.test:
  Test file to check a set of type conversions
  with current settings of slave_type_conversions.
mysql-test/suite/rpl/t/rpl_typeconv.test:
  Test file to test conversions from master to slave with
  all possible values for slave_type_conversions.
  
  The test also checks that the slave_type_conversions
  variable works as expected.
sql/field.cc:
  Changing definition of compatible_field_size to both check if 
  two field with identical base types are compatible and give an
  order between them if they are compatible.
  
  This only implement checking on the slave, so it will not affect
  replication from an old master to a new slave.
sql/field.h:
  Changing prototypes for functions:
  - compatible_field_size()
  - init_for_tmp_table()
  - row_pack_length()
sql/log_event.cc:
  Changing compability checks to build a conversion table if the fields
  are compatible, but does not have the same base type.
sql/log_event_old.cc:
  Changing compability checks to build a conversion table if the fields
  are compatible, but does not have the same base type.
sql/mysql_priv.h:
  Adding global option variable for SLAVE_TYPE_CONVERSIONS
sql/mysqld.cc:
  Adding SLAVE_TYPE_CONVERSIONS global server variable.
sql/rpl_record.cc:
  Changing unpack_row to use the conversion table if present.
sql/rpl_rli.h:
  Removing function get_tabledef and replacing it with get_table_data().
  This function retrieve data for table opened for replication, not just
  table definition.
sql/rpl_utility.cc:
  Function table_def::compatible_with is changed to compare table on master
  and slave for compatibility and generate a conversions table if they are
  compatible.
  
  Computing real type of fields from metadata for ENUM and SET types.
  Computing pack_length correctly for ENUM, SET, and BLOB types.
  
  Adding optimization to not check compatibility if no
  slave type conversions are enabled.
sql/rpl_utility.h:
  Changing prototypes since implementation has changed.
  
  Modifying table_def::type() to return real type instead of stored type.
sql/set_var.cc:
  Adding SLAVE_TYPE_CONVERSIONS variable.
sql/set_var.h:
  Adding SLAVE_TYPE_CONVERSIONS variable.
sql/share/errmsg.txt:
  Adding error messages for slave type conversions.
sql/sql_class.h:
  Adding SLAVE_TYPE_CONVERSIONS variable.
sql/sql_select.cc:
  Correcting create_virtual_tmp_table() to compute null bit positions
  correctly in the presence of bit fields.

Knowledge of no SSL support is not used
Skip tests the same way e.g. innodb tests are
Does not refer to have_ssl_communication.inc, 
     will add this when merging to 6.0-codebase

Don't print entire log, but use extract_server_log() introduced by 46007

Test batches may be terminated too early
Avoid counting exp-fail tests

Use "#ifdef", not plain "#if".

Temporary tables may set join->group to 0 even though there is 
grouping. Also need to test if sum_func_count>0 when JOIN::exec() 
decides whether to present results in a grouped manner.

sql/sql_select.cc:
  Temporary tables may set join->group to 0 even though there is 
  grouping. Also need to test if sum_func_count>0 when JOIN::exec() 
  decides whether to present results in a grouped manner.

            columns without where/group
                     
Simple SELECT with implicit grouping used to return many rows if
the query was ordered by the aggregated column in the SELECT
list. This was incorrect because queries with implicit grouping
should only return a single record.
                              
The problem was that when JOIN:exec() decided if execution needed
to handle grouping, it was assumed that sum_func_count==0 meant
that there were no aggregate functions in the query. This
assumption was not correct in JOIN::exec() because the aggregate
functions might have been optimized away during JOIN::optimize().
                  
The reason why queries without ordering behaved correctly was
that sum_func_count is only recalculated if the optimizer chooses
to use temporary tables (which it does in the ordered case).
Hence, non-ordered queries were correctly treated as grouped.
                  
The fix for this bug was to remove the assumption that
sum_func_count==0 means that there is no need for grouping. This
was done by introducing variable "bool implicit_grouping" in the
JOIN object.

mysql-test/r/func_group.result:
  Add test for BUG#47280
mysql-test/t/func_group.test:
  Add test for BUG#47280
sql/opt_sum.cc:
  Improve comment for opt_sum_query()
sql/sql_class.h:
  Add comment for variables in TMP_TABLE_PARAM
sql/sql_select.cc:
  Introduce and use variable implicit_grouping instead of (!group_list && sum_func_count) in places that need to test if grouping is required. Also added comments for: optimization of aggregate fields for implicitly grouped queries  (JOIN::optimize) and choice of end_select method (JOIN::execute)
sql/sql_select.h:
  Add variable implicit_grouping, which will be TRUE for queries that contain aggregate functions but no GROUP BY clause. Also added comment to sort_and_group variable.

Difficult to debug due to lacking report
This does not solve the real issue, but extracts server log when it happens
Forst commit was incomplete, didn't cover all cases

      
The BINLOG statement was sharing too much code with the slave SQL thread, introduced with
the patch for Bug#32407. This caused statements to be logged with the wrong server_id, the
id stored inside the events of the BINLOG statement rather than the id of the running 
server.
      
Fix by rearranging code a bit so that only relevant parts of the code are executed by
the BINLOG statement, and the server_id of the server executing the statements will 
not be overrided by the server_id stored in the 'format description BINLOG statement'.

mysql-test/extra/binlog_tests/binlog.test:
  Added test to verify if the server_id stored in the 'format 
  description BINLOG statement' will override the server_id
  of the server executing the statements.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
  Test result for bug#46640
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
  Test result for bug#46640
sql/log_event.cc:
  Moved rows_event_stmt_clean() call from update_pos() to apply_event(). This in any case
  makes more sense, and is needed as update_pos() is no longer called when executing
  BINLOG statements.
  
  Moved setting of rli->relay_log.description_event_for_exec from 
  Format_description_log_event::do_update_pos() to 
  Format_description_log_event::do_apply_event()
sql/log_event_old.cc:
  Moved rows_event_stmt_clean() call from update_pos() to apply_event(). This in any case
  makes more sense, and is needed as update_pos() is no longer called when executing
  BINLOG statements.
sql/slave.cc:
  The skip flag is no longer needed, as the code path for BINLOG statement has been 
  cleaned up.
sql/sql_binlog.cc:
  Don't invoke the update_pos() code path for the BINLOG statement, as it contains code 
  that is redundant and/or harmful (especially setting thd->server_id).