An error occurred fetching the project authors.
  1. 22 Mar, 2007 1 commit
  2. 21 Mar, 2007 1 commit
  3. 16 Mar, 2007 1 commit
  4. 09 Mar, 2007 1 commit
    • kroki/tomash@moonlight.home's avatar
      BUG#9953: CONVERT_TZ requires mysql.time_zone_name to be locked · c19affef
      kroki/tomash@moonlight.home authored
      The problem was that some facilities (like CONVERT_TZ() function or
      server HELP statement) may require implicit access to some tables in
      'mysql' database.  This access was done by ordinary means of adding
      such tables to the list of tables the query is going to open.
      However, if we issued LOCK TABLES before that, we would get "table
      was not locked" error trying to open such implicit tables.
      
      The solution is to treat certain tables as MySQL system tables, like
      we already do for mysql.proc.  Such tables may be opened for reading
      at any moment regardless of any locks in effect.  The cost of this is
      that system table may be locked for writing only together with other
      system tables, it is disallowed to lock system tables for writing and
      have any other lock on any other table.
      
      After this patch the following tables are treated as MySQL system
      tables:
        mysql.help_category
        mysql.help_keyword
        mysql.help_relation
        mysql.help_topic
        mysql.proc (it already was)
        mysql.time_zone
        mysql.time_zone_leap_second
        mysql.time_zone_name
        mysql.time_zone_transition
        mysql.time_zone_transition_type
      
      These tables are now opened with open_system_tables_for_read() and
      closed with close_system_tables(), or one table may be opened with
      open_system_table_for_update() and closed with close_thread_tables()
      (the latter is used for mysql.proc table, which is updated as part of
      normal MySQL server operation).  These functions may be used when
      some tables were opened and locked already.
      
      NOTE: online update of time zone tables is not possible during
      replication, because there's no time zone cache flush neither on LOCK
      TABLES, nor on FLUSH TABLES, so the master may serve stale time zone
      data from cache, while on slave updated data will be loaded from the
      time zone tables.
      c19affef
  5. 05 Mar, 2007 1 commit
    • gkodinov/kgeorge@macbook.gmz's avatar
      WL#3527: Extend IGNORE INDEX so places where index is ignored · b9c82eaa
      gkodinov/kgeorge@macbook.gmz authored
               can be specified
      Currently MySQL allows one to specify what indexes to ignore during
      join optimization. The scope of the current USE/FORCE/IGNORE INDEX 
      statement is only the FROM clause, while all other clauses are not 
      affected.
      
      However, in certain cases, the optimizer
      may incorrectly choose an index for sorting and/or grouping, and
      produce an inefficient query plan.
      
      This task provides the means to specify what indexes are
      ignored/used for what operation in a more fine-grained manner, thus
      making it possible to manually force a better plan. We do this
      by extending the current IGNORE/USE/FORCE INDEX syntax to:
      
      IGNORE/USE/FORCE INDEX [FOR {JOIN | ORDER | GROUP BY}]
      
      so that:
      - if no FOR is specified, the index hint will apply everywhere.
      - if MySQL is started with the compatibility option --old_mode then
        an index hint without a FOR clause works as in 5.0 (i.e, the 
        index will only be ignored for JOINs, but can still be used to
        compute ORDER BY).
      
      See the WL#3527 for further details.
      b9c82eaa
  6. 13 Feb, 2007 1 commit
  7. 29 Jan, 2007 1 commit
  8. 28 Dec, 2006 1 commit
  9. 02 Dec, 2006 1 commit
  10. 21 Nov, 2006 1 commit
    • monty@mysql.com/nosik.monty.fi's avatar
      Added --debug-info to most clients to detect memory leaks in mysql-test-run · f6682e27
      monty@mysql.com/nosik.monty.fi authored
      Moved .progress files into the log directory
      Moved 'cluster' database tables into the MySQL database, to not have 'cluster' beeing a reserved database name
      Fixed bug where mysqld got a core dump when trying to use a table created by MySQL 3.23
      Fixed some compiler warnings
      Fixed small memory leak in libmysql
      Note that this doesn't changeset doesn't include the new mysqldump.c code required to run some tests. This will be added when I merge 5.0 to 5.1
      f6682e27
  11. 13 Oct, 2006 1 commit
    • petr/cps@mysql.com/owlet.local's avatar
      Fix for Bug #17544 "Cannot do atomic log rotate", · 6846f8d9
      petr/cps@mysql.com/owlet.local authored
      Bug #21785 "Server crashes after rename of the log table" and
      Bug #21966 "Strange warnings on create like/repair of the log
                  tables"
      
      According to the patch, from now on, one should use RENAME to
      perform a log table rotation (this should also be reflected in
      the manual).
      
      Here is a sample:
      
      use mysql;
      CREATE TABLE IF NOT EXISTS general_log2 LIKE general_log;
      RENAME TABLE general_log TO general_log_backup, general_log2 TO general_log;
      
      The rules for Rename of the log tables are following:
            IF   1. Log tables are enabled
            AND  2. Rename operates on the log table and nothing is being
                    renamed to the log table.
            DO   3. Throw an error message.
            ELSE 4. Perform rename.
       
      The very RENAME query will go the the old (backup) table. This is
      consistent with the behavoiur we have with binlog ROTATE LOGS
      statement.
      
      Other problems, which are solved by the patch are:
      
      1) Now REPAIR of the log table is exclusive operation (as it should be), this
         also eliminates lock-related warnings. and
      2) CREATE LIKE TABLE now usese usual read lock on the source table rather
         then name lock, which is too restrictive. This way we get rid of another
         log table-related warning, which occured because of the above fact
         (as a side-effect, name lock resulted in a warning).
      6846f8d9
  12. 05 Oct, 2006 1 commit
  13. 30 Sep, 2006 2 commits
  14. 27 Sep, 2006 1 commit
  15. 15 Sep, 2006 2 commits
    • brian@zim.(none)'s avatar
      This changes the order of the universe, black is now the new white. · 7194b6d7
      brian@zim.(none) authored
      In practice this means that handlerton is now created by the server and is passed to the engine. Plugin startups can now also control how plugins are inited (and can optionally pass values). Bit more flexibility to those who want to write plugin interfaces to the database. 
      7194b6d7
    • petr/cps@mysql.com/owlet.local's avatar
      Post-review fixes for · f6663df6
      petr/cps@mysql.com/owlet.local authored
      Bug #18559 "log tables cannot change engine, and
                  gets deadlocked when dropping w/ log on":
      1) Add more generic error messages
      2) Add new handlerton flag for engines, which support
         log tables
      3) Remove (log-tables related) mutex lock in myisam to
         improve performance
      f6663df6
  16. 30 Aug, 2006 1 commit
  17. 22 Aug, 2006 1 commit
    • brian@zim.(none)'s avatar
      This changest: · b5187637
      brian@zim.(none) authored
      Plugins now when compiled or not compiled work correctly with status variables. 
      Status variables from plugins now set their own names (removed bit where plugin name was pre-appended this broke Innodb and Cluster)
      A few Makefile cleanups. 
      b5187637
  18. 20 Aug, 2006 1 commit
  19. 10 Aug, 2006 1 commit
  20. 03 Aug, 2006 1 commit
    • petr/cps@mysql.com/owlet.'s avatar
      Fix Bug #18559 "log tables cannot change engine, and · be2ce261
      petr/cps@mysql.com/owlet. authored
                      gets deadlocked when dropping w/ log on"
      
      Log tables rely on concurrent insert machinery to add data.
      This means that log tables are always opened and locked by
      special (artificial) logger threads. Because of this, the thread
      which tries to drop a log table starts to wait for the table
      to be unlocked. Which will happen only if the log table is disabled.
      Alike situation happens if one tries to alter a log table.
      However in addition to the problem above, alter table calls
      check_if_locking_is_allowed() routine for the engine. The
      routine does not allow alter for the log tables. So, alter
      doesn't start waiting forever for logs to be disabled, but 
      returns with an error.
      Another problem is that not all engines could be used for
      the log tables. That's because they need concurrent insert.
      
      In this patch we:
      (1) Explicitly disallow to drop/alter a log table if it
          is currently used by the logger.
      (2) Update MyISAM to support log tables
      (3) Allow to drop log tables/alter log tables if log is
          disabled
      At the same time we (4) Disallow to alter log tables to
      unsupported engine (after this patch CSV and MyISAM are 
      alowed)
      Recommit with review fixes.
      be2ce261
  21. 02 Aug, 2006 1 commit
    • ingo/istruewing@chilla.local's avatar
      Bug#18775 - Temporary table from alter table visible to other threads · 8e4c36ad
      ingo/istruewing@chilla.local authored
      Continued implementation of WL#1324 (table name to filename encoding)
      
      The intermediate (not temporary) files of the new table
      during ALTER TABLE was visible for SHOW TABLES. These
      intermediate files are copies of the original table with
      the changes done by ALTER TABLE. After all the data is
      copied over from the original table, these files are renamed 
      to the original tables file names. So they are not temporary 
      files. They persist after ALTER TABLE, but just with another 
      name.
      
      In 5.0 the intermediate files are invisible for SHOW TABLES
      because all file names beginning with "#sql" were suppressed.
      
      This failed since 5.1.6 because even temporary table names were
      converted when making file names from them. The prefix became
      converted to "@0023sql". Converting the prefix during SHOW TABLES
      would suppress the listing of user tables that start with "#sql".
      
      The solution of the problem is to continue the implementation of
      the table name to file name conversion feature. One requirement
      is to suppress the conversion for temporary table names.
      
      This change is straightforward for real temporary tables as there
      is a function that creates temporary file names.
      
      But the generated path names are located in TMPDIR and have no
      relation to the internal table name. This cannot be used for
      ALTER TABLE. Its intermediate files need to be in the same
      directory as the old table files. And it is necessary to be
      able to deduce the same path from the same table name repeatedly.
      
      Consequently the intermediate table files must be handled like normal
      tables. Their internal names shall start with tmp_file_prefix
      (#sql) and they shall not be converted like normal table names.
      
      I added a flags parameter to all relevant functions that are
      called from ALTER TABLE. It is used to suppress the conversion
      for the intermediate table files.
      
      The outcome is that the suppression of #sql in SHOW TABLES
      works again. It does not suppress user tables as these are
      converted to @0023sql on file level.
      
      This patch does also fix ALTER TABLE ... RENAME, which could not 
      rename a table with non-ASCII characters in its name.
      
      It does also fix the problem that a user could create a table like
      `#sql-xxxx-yyyy`, where xxxx is mysqld's pid and yyyy is the thread
      ID of some other thread, which prevented this thread from running 
      ALTER TABLE.
      
      Some of the above problems are mentioned in Bug 1405, which can
      be closed with this patch.
      
      This patch does also contain some minor fixes for other forgotten
      conversions. Still known problems are reported as bugs 21370,
      21373, and 21387.
      8e4c36ad
  22. 15 Jul, 2006 1 commit
  23. 04 Jun, 2006 1 commit
    • monty@mysql.com's avatar
      This changeset is largely a handler cleanup changeset (WL#3281), but includes... · 74cc73d4
      monty@mysql.com authored
      This changeset is largely a handler cleanup changeset (WL#3281), but includes fixes and cleanups that was found necessary while testing the handler changes
      
      Changes that requires code changes in other code of other storage engines.
      (Note that all changes are very straightforward and one should find all issues
      by compiling a --debug build and fixing all compiler errors and all
      asserts in field.cc while running the test suite),
      
      - New optional handler function introduced: reset()
        This is called after every DML statement to make it easy for a handler to
        statement specific cleanups.
        (The only case it's not called is if force the file to be closed)
      
      - handler::extra(HA_EXTRA_RESET) is removed. Code that was there before
        should be moved to handler::reset()
      
      - table->read_set contains a bitmap over all columns that are needed
        in the query.  read_row() and similar functions only needs to read these
        columns
      - table->write_set contains a bitmap over all columns that will be updated
        in the query. write_row() and update_row() only needs to update these
        columns.
        The above bitmaps should now be up to date in all context
        (including ALTER TABLE, filesort()).
      
        The handler is informed of any changes to the bitmap after
        fix_fields() by calling the virtual function
        handler::column_bitmaps_signal(). If the handler does caching of
        these bitmaps (instead of using table->read_set, table->write_set),
        it should redo the caching in this code. as the signal() may be sent
        several times, it's probably best to set a variable in the signal
        and redo the caching on read_row() / write_row() if the variable was
        set.
      
      - Removed the read_set and write_set bitmap objects from the handler class
      
      - Removed all column bit handling functions from the handler class.
        (Now one instead uses the normal bitmap functions in my_bitmap.c instead
        of handler dedicated bitmap functions)
      
      - field->query_id is removed. One should instead instead check
        table->read_set and table->write_set if a field is used in the query.
      
      - handler::extra(HA_EXTRA_RETRIVE_ALL_COLS) and
        handler::extra(HA_EXTRA_RETRIEVE_PRIMARY_KEY) are removed. One should now
        instead use table->read_set to check for which columns to retrieve.
      
      - If a handler needs to call Field->val() or Field->store() on columns
        that are not used in the query, one should install a temporary
        all-columns-used map while doing so. For this, we provide the following
        functions:
      
        my_bitmap_map *old_map= dbug_tmp_use_all_columns(table, table->read_set);
        field->val();
        dbug_tmp_restore_column_map(table->read_set, old_map);
      
        and similar for the write map:
      
        my_bitmap_map *old_map= dbug_tmp_use_all_columns(table, table->write_set);
        field->val();
        dbug_tmp_restore_column_map(table->write_set, old_map);
      
        If this is not done, you will sooner or later hit a DBUG_ASSERT
        in the field store() / val() functions.
        (For not DBUG binaries, the dbug_tmp_restore_column_map() and
        dbug_tmp_restore_column_map() are inline dummy functions and should
        be optimized away be the compiler).
      
      - If one needs to temporary set the column map for all binaries (and not
        just to avoid the DBUG_ASSERT() in the Field::store() / Field::val()
        methods) one should use the functions tmp_use_all_columns() and
        tmp_restore_column_map() instead of the above dbug_ variants.
      
      - All 'status' fields in the handler base class (like records,
        data_file_length etc) are now stored in a 'stats' struct. This makes
        it easier to know what status variables are provided by the base
        handler.  This requires some trivial variable names in the extra()
        function.
      
      - New virtual function handler::records().  This is called to optimize
        COUNT(*) if (handler::table_flags() & HA_HAS_RECORDS()) is true.
        (stats.records is not supposed to be an exact value. It's only has to
        be 'reasonable enough' for the optimizer to be able to choose a good
        optimization path).
      
      - Non virtual handler::init() function added for caching of virtual
        constants from engine.
      
      - Removed has_transactions() virtual method. Now one should instead return
        HA_NO_TRANSACTIONS in table_flags() if the table handler DOES NOT support
        transactions.
      
      - The 'xxxx_create_handler()' function now has a MEM_ROOT_root argument
        that is to be used with 'new handler_name()' to allocate the handler
        in the right area.  The xxxx_create_handler() function is also
        responsible for any initialization of the object before returning.
      
        For example, one should change:
      
        static handler *myisam_create_handler(TABLE_SHARE *table)
        {
          return new ha_myisam(table);
        }
      
        ->
      
        static handler *myisam_create_handler(TABLE_SHARE *table, MEM_ROOT *mem_root)
        {
          return new (mem_root) ha_myisam(table);
        }
      
      - New optional virtual function: use_hidden_primary_key().
        This is called in case of an update/delete when
        (table_flags() and HA_PRIMARY_KEY_REQUIRED_FOR_DELETE) is defined
        but we don't have a primary key. This allows the handler to take precisions
        in remembering any hidden primary key to able to update/delete any
        found row. The default handler marks all columns to be read.
      
      - handler::table_flags() now returns a ulonglong (to allow for more flags).
      
      - New/changed table_flags()
        - HA_HAS_RECORDS	    Set if ::records() is supported
        - HA_NO_TRANSACTIONS	    Set if engine doesn't support transactions
        - HA_PRIMARY_KEY_REQUIRED_FOR_DELETE
                                  Set if we should mark all primary key columns for
      			    read when reading rows as part of a DELETE
      			    statement. If there is no primary key,
      			    all columns are marked for read.
        - HA_PARTIAL_COLUMN_READ  Set if engine will not read all columns in some
      			    cases (based on table->read_set)
       - HA_PRIMARY_KEY_ALLOW_RANDOM_ACCESS
         			    Renamed to HA_PRIMARY_KEY_REQUIRED_FOR_POSITION.
       - HA_DUPP_POS              Renamed to HA_DUPLICATE_POS
       - HA_REQUIRES_KEY_COLUMNS_FOR_DELETE
      			    Set this if we should mark ALL key columns for
      			    read when when reading rows as part of a DELETE
      			    statement. In case of an update we will mark
      			    all keys for read for which key part changed
      			    value.
        - HA_STATS_RECORDS_IS_EXACT
      			     Set this if stats.records is exact.
      			     (This saves us some extra records() calls
      			     when optimizing COUNT(*))
      			    
      
      - Removed table_flags()
        - HA_NOT_EXACT_COUNT     Now one should instead use HA_HAS_RECORDS if
      			   handler::records() gives an exact count() and
      			   HA_STATS_RECORDS_IS_EXACT if stats.records is exact.
        - HA_READ_RND_SAME	   Removed (no one supported this one)
      
      - Removed not needed functions ha_retrieve_all_cols() and ha_retrieve_all_pk()
      
      - Renamed handler::dupp_pos to handler::dup_pos
      
      - Removed not used variable handler::sortkey
      
      
      Upper level handler changes:
      
      - ha_reset() now does some overall checks and calls ::reset()
      - ha_table_flags() added. This is a cached version of table_flags(). The
        cache is updated on engine creation time and updated on open.
      
      
      MySQL level changes (not obvious from the above):
      
      - DBUG_ASSERT() added to check that column usage matches what is set
        in the column usage bit maps. (This found a LOT of bugs in current
        column marking code).
      
      - In 5.1 before, all used columns was marked in read_set and only updated
        columns was marked in write_set. Now we only mark columns for which we
        need a value in read_set.
      
      - Column bitmaps are created in open_binary_frm() and open_table_from_share().
        (Before this was in table.cc)
      
      - handler::table_flags() calls are replaced with handler::ha_table_flags()
      
      - For calling field->val() you must have the corresponding bit set in
        table->read_set. For calling field->store() you must have the
        corresponding bit set in table->write_set. (There are asserts in
        all store()/val() functions to catch wrong usage)
      
      - thd->set_query_id is renamed to thd->mark_used_columns and instead
        of setting this to an integer value, this has now the values:
        MARK_COLUMNS_NONE, MARK_COLUMNS_READ, MARK_COLUMNS_WRITE
        Changed also all variables named 'set_query_id' to mark_used_columns.
      
      - In filesort() we now inform the handler of exactly which columns are needed
        doing the sort and choosing the rows.
      
      - The TABLE_SHARE object has a 'all_set' column bitmap one can use
        when one needs a column bitmap with all columns set.
        (This is used for table->use_all_columns() and other places)
      
      - The TABLE object has 3 column bitmaps:
        - def_read_set     Default bitmap for columns to be read
        - def_write_set    Default bitmap for columns to be written
        - tmp_set          Can be used as a temporary bitmap when needed.
        The table object has also two pointer to bitmaps read_set and write_set
        that the handler should use to find out which columns are used in which way.
      
      - count() optimization now calls handler::records() instead of using
        handler->stats.records (if (table_flags() & HA_HAS_RECORDS) is true).
      
      - Added extra argument to Item::walk() to indicate if we should also
        traverse sub queries.
      
      - Added TABLE parameter to cp_buffer_from_ref()
      
      - Don't close tables created with CREATE ... SELECT but keep them in
        the table cache. (Faster usage of newly created tables).
      
      
      New interfaces:
      
      - table->clear_column_bitmaps() to initialize the bitmaps for tables
        at start of new statements.
      
      - table->column_bitmaps_set() to set up new column bitmaps and signal
        the handler about this.
      
      - table->column_bitmaps_set_no_signal() for some few cases where we need
        to setup new column bitmaps but don't signal the handler (as the handler
        has already been signaled about these before). Used for the momement
        only in opt_range.cc when doing ROR scans.
      
      - table->use_all_columns() to install a bitmap where all columns are marked
        as use in the read and the write set.
      
      - table->default_column_bitmaps() to install the normal read and write
        column bitmaps, but not signaling the handler about this.
        This is mainly used when creating TABLE instances.
      
      - table->mark_columns_needed_for_delete(),
        table->mark_columns_needed_for_delete() and
        table->mark_columns_needed_for_insert() to allow us to put additional
        columns in column usage maps if handler so requires.
        (The handler indicates what it neads in handler->table_flags())
      
      - table->prepare_for_position() to allow us to tell handler that it
        needs to read primary key parts to be able to store them in
        future table->position() calls.
        (This replaces the table->file->ha_retrieve_all_pk function)
      
      - table->mark_auto_increment_column() to tell handler are going to update
        columns part of any auto_increment key.
      
      - table->mark_columns_used_by_index() to mark all columns that is part of
        an index.  It will also send extra(HA_EXTRA_KEYREAD) to handler to allow
        it to quickly know that it only needs to read colums that are part
        of the key.  (The handler can also use the column map for detecting this,
        but simpler/faster handler can just monitor the extra() call).
      
      - table->mark_columns_used_by_index_no_reset() to in addition to other columns,
        also mark all columns that is used by the given key.
      
      - table->restore_column_maps_after_mark_index() to restore to default
        column maps after a call to table->mark_columns_used_by_index().
      
      - New item function register_field_in_read_map(), for marking used columns
        in table->read_map. Used by filesort() to mark all used columns
      
      - Maintain in TABLE->merge_keys set of all keys that are used in query.
        (Simplices some optimization loops)
      
      - Maintain Field->part_of_key_not_clustered which is like Field->part_of_key
        but the field in the clustered key is not assumed to be part of all index.
        (used in opt_range.cc for faster loops)
      
      -  dbug_tmp_use_all_columns(), dbug_tmp_restore_column_map()
         tmp_use_all_columns() and tmp_restore_column_map() functions to temporally
         mark all columns as usable.  The 'dbug_' version is primarily intended
         inside a handler when it wants to just call Field:store() & Field::val()
         functions, but don't need the column maps set for any other usage.
         (ie:: bitmap_is_set() is never called)
      
      - We can't use compare_records() to skip updates for handlers that returns
        a partial column set and the read_set doesn't cover all columns in the
        write set. The reason for this is that if we have a column marked only for
        write we can't in the MySQL level know if the value changed or not.
        The reason this worked before was that MySQL marked all to be written
        columns as also to be read. The new 'optimal' bitmaps exposed this 'hidden
        bug'.
      
      - open_table_from_share() does not anymore setup temporary MEM_ROOT
        object as a thread specific variable for the handler. Instead we
        send the to-be-used MEMROOT to get_new_handler().
        (Simpler, faster code)
      
      
      
      Bugs fixed:
      
      - Column marking was not done correctly in a lot of cases.
        (ALTER TABLE, when using triggers, auto_increment fields etc)
        (Could potentially result in wrong values inserted in table handlers
        relying on that the old column maps or field->set_query_id was correct)
        Especially when it comes to triggers, there may be cases where the
        old code would cause lost/wrong values for NDB and/or InnoDB tables.
      
      - Split thd->options flag OPTION_STATUS_NO_TRANS_UPDATE to two flags:
        OPTION_STATUS_NO_TRANS_UPDATE and OPTION_KEEP_LOG.
        This allowed me to remove some wrong warnings about:
        "Some non-transactional changed tables couldn't be rolled back"
      
      - Fixed handling of INSERT .. SELECT and CREATE ... SELECT that wrongly reset
        (thd->options & OPTION_STATUS_NO_TRANS_UPDATE) which caused us to loose
        some warnings about
        "Some non-transactional changed tables couldn't be rolled back")
      
      - Fixed use of uninitialized memory in ha_ndbcluster.cc::delete_table()
        which could cause delete_table to report random failures.
      
      - Fixed core dumps for some tests when running with --debug
      
      - Added missing FN_LIBCHAR in mysql_rm_tmp_tables()
        (This has probably caused us to not properly remove temporary files after
        crash)
      
      - slow_logs was not properly initialized, which could maybe cause
        extra/lost entries in slow log.
      
      - If we get an duplicate row on insert, change column map to read and
        write all columns while retrying the operation. This is required by
        the definition of REPLACE and also ensures that fields that are only
        part of UPDATE are properly handled.  This fixed a bug in NDB and
        REPLACE where REPLACE wrongly copied some column values from the replaced
        row.
      
      - For table handler that doesn't support NULL in keys, we would give an error
        when creating a primary key with NULL fields, even after the fields has been
        automaticly converted to NOT NULL.
      
      - Creating a primary key on a SPATIAL key, would fail if field was not
        declared as NOT NULL.
      
      
      Cleanups:
      
      - Removed not used condition argument to setup_tables
      
      - Removed not needed item function reset_query_id_processor().
      
      - Field->add_index is removed. Now this is instead maintained in
        (field->flags & FIELD_IN_ADD_INDEX)
      
      - Field->fieldnr is removed (use field->field_index instead)
      
      - New argument to filesort() to indicate that it should return a set of
        row pointers (not used columns). This allowed me to remove some references
        to sql_command in filesort and should also enable us to return column
        results in some cases where we couldn't before.
      
      - Changed column bitmap handling in opt_range.cc to be aligned with TABLE
        bitmap, which allowed me to use bitmap functions instead of looping over
        all fields to create some needed bitmaps. (Faster and smaller code)
      
      - Broke up found too long lines
      
      - Moved some variable declaration at start of function for better code
        readability.
      
      - Removed some not used arguments from functions.
        (setup_fields(), mysql_prepare_insert_check_table())
      
      - setup_fields() now takes an enum instead of an int for marking columns
         usage.
      
      - For internal temporary tables, use handler::write_row(),
        handler::delete_row() and handler::update_row() instead of
        handler::ha_xxxx() for faster execution.
      
      - Changed some constants to enum's and define's.
      
      - Using separate column read and write sets allows for easier checking
        of timestamp field was set by statement.
      
      - Remove calls to free_io_cache() as this is now done automaticly in ha_reset()
      
      - Don't build table->normalized_path as this is now identical to table->path
        (after bar's fixes to convert filenames)
      
      - Fixed some missed DBUG_PRINT(.."%lx") to use "0x%lx" to make it easier to
        do comparision with the 'convert-dbug-for-diff' tool.
      
      
      Things left to do in 5.1:
      
      - We wrongly log failed CREATE TABLE ... SELECT in some cases when using
        row based logging (as shown by testcase binlog_row_mix_innodb_myisam.result)
        Mats has promised to look into this.
      
      - Test that my fix for CREATE TABLE ... SELECT is indeed correct.
        (I added several test cases for this, but in this case it's better that
        someone else also tests this throughly).
        Lars has promosed to do this.
      74cc73d4
  24. 02 Jun, 2006 1 commit
    • guilhem@mysql.com's avatar
      First push for WL#3146 "less locking in auto_increment". It is a 0-real-change patch. · a4e778f3
      guilhem@mysql.com authored
      New prototype for get_auto_increment() (but new arguments not yet used), to be able
      to reserve a finite interval of auto_increment values from cooperating engines.
      A hint on how many values to reserve is found in handler::estimation_rows_to_insert,
      filled by ha_start_bulk_insert(), new wrapper around start_bulk_insert().
      NOTE: this patch changes nothing, for all engines. But it makes the API ready for those
      engines which will want to do reservation.
      More csets will come to complete WL#3146.
      a4e778f3
  25. 01 Jun, 2006 1 commit
  26. 28 May, 2006 1 commit
    • serg@sergbook.mysql.com's avatar
      handlerton cleanup: · fe97dbb5
      serg@sergbook.mysql.com authored
      duplicate fields removed, st_mysql_storage_engine added to support
      run-time handlerton initialization (no compiler warnings), handler API
      is now tied to MySQL version, handlerton->plugin mapping added
      (slot-based), dummy default_hton removed, plugin-type-specific
      initialization generalized, built-in plugins are now initialized too,
      --default-storage-engine no longer needs a list of storage engines
      in handle_options().
      
      mysql-test-run.pl bugfixes
      fe97dbb5
  27. 15 May, 2006 1 commit
    • jani@a193-229-222-105.elisa-laajakaista.fi's avatar
      Fix, or a workaround for Bug#19386 "Multiple alter causes crashed table" · 3846438a
      The problem is that in a MyISAM table the following column
      after a varchar field gets corrupted, if varchar field is
      extended.
      
      This should be made to work without a copy in the future, but
      I'm not sure if this code is ready yet. This fix will force copy
      in this case. It will not do any harm to have it here, only makes
      alter table a bit slower in this case. If this should work for
      MyISAM, then the bug is somewhere else in that code.
      
      Until it works, I propose this as a temporary fix or a workaround.
      Test case for the bug has been added.
      3846438a
  28. 04 May, 2006 1 commit
    • monty@mysql.com's avatar
      Fixed compiler warnings · c10f3767
      monty@mysql.com authored
      Move plugin declarations after system functions have been checked
      (Fixes problem with ndb_config failing becasue SHM is not declared)
      Fixed some memory leaks
      c10f3767
  29. 03 May, 2006 1 commit
    • monty@mysql.com's avatar
      Added support for key_block_size for key and table level (WL#602) · 343644dd
      monty@mysql.com authored
      Added support for key_block_size to MyISAM.
      Simplify interface to 'new Key' to make it easier to add new key options.
      mysqld option --new is used to define where key options are printed.
      (In 5.3 we should move all key options to after key part definition to avoid problem with reserved names)
      Fixed some compiler warnings and a memory leak in ssl
      343644dd
  30. 02 May, 2006 1 commit
  31. 13 Apr, 2006 1 commit
  32. 12 Apr, 2006 1 commit
  33. 29 Mar, 2006 1 commit
    • monty@mysql.com's avatar
      Fixed compiler and valgrind warnings · 1994ed49
      monty@mysql.com authored
      Added missing DBUG_xxx_RETURN statements
      Fixed some usage of not initialized variables (as found by valgrind)
      Ensure that we don't remove locked tables used as name locks from open table cache until unlock_table_names() are called.
      This was fixed by having drop_locked_name() returning any table used as a name lock so that we can free it in unlock_table_names()
      This will allow Tomas to continue with his work to use namelocks to syncronize things.
      
      Note: valgrind still produces a lot of warnings about using not initialized code and shows memory loss errors when running the ndb tests
      1994ed49
  34. 25 Feb, 2006 1 commit
    • guilhem@mysql.com's avatar
      WL#2977 and WL#2712 global and session-level variable to set the binlog format (row/statement), · 00717495
      guilhem@mysql.com authored
      and new binlog format called "mixed" (which is statement-based except if only row-based is correct,
      in this cset it means if UDF or UUID is used; more cases could be added in later 5.1 release):
      SET GLOBAL|SESSION BINLOG_FORMAT=row|statement|mixed|default;
      the global default is statement unless cluster is enabled (then it's row) as in 5.1-alpha.
      It's not possible to use SET on this variable if a session is currently in row-based mode and has open temporary tables (because CREATE
      TEMPORARY TABLE was not binlogged so temp table is not known on slave),  or if NDB is enabled (because
      NDB does not support such change on-the-fly, though it will later), of if in a stored function (see below).
      The added tests test the possibility or impossibility to SET, their effects, and the mixed mode,
      including in prepared statements and in stored procedures and functions.
      Caveats:
      a) The mixed mode will not work for stored functions: in mixed mode, a stored function will
      always be binlogged as one call and in a statement-based way (e.g. INSERT VALUES(myfunc()) or SELECT myfunc()).
      b) for the same reason, changing the thread's binlog format inside a stored function is
      refused with an error message.
      c) the same problems apply to triggers; implementing b) for triggers will be done later (will ask
      Dmitri).
      Additionally, as the binlog format is now changeable by each user for his session, I remove the implication
      which was done at startup, where row-based automatically set log-bin-trust-routine-creators to 1
      (not possible anymore as a user can now switch to stmt-based and do nasty things again), and automatically
      set --innodb-locks-unsafe-for-binlog to 1 (was anyway theoretically incorrect as it disabled
      phantom protection).
      Plus fixes for compiler warnings.
      00717495
  35. 12 Feb, 2006 1 commit
  36. 28 Jan, 2006 1 commit
  37. 19 Jan, 2006 2 commits