Code in MDL subsystem assumes that identifiers of objects can't
be longer than NAME_LEN characters. This assumption was broken
when one tried to construct MDL_key based on table alias, which
can have arbitrary length. Since MDL_key's (and MDL locks) are
not really used for table aliases this patch changes code to
not initialize MDL_key object for table list element representing
aliases.

 
 bzr merge 5.1->5.5

      
=== Problem ===
      
The test is dependent on binlog positions and checks
to see if the command 'START SLAVE' functions correctly
with the 'UNTIL' clause added to it. The 'UNTIL' clause
is added to specify that the slave should start and run
until the SQL thread reaches a given point in the master
binary log or in the slave relay log.
      
The test uses hard coded values for MASTER_LOG_POS and
RELAY_LOG_POS, instead of extracting it using
query_get_value() function. There is a test
'rpl.rpl_row_until' which does the similar thing but uses 
query_get_value() function to set the values of
MASTER_LOG_POS/ RELAY_LOG_POS. To be precise,
rpl.rpl_row_until is a modified version of
engines/func.rpl_row_until.test.
      
The use of hard coded values may lead the slave to stop at a position
which may differ from the expected position in the binlog file,
an example being the failure of engines/funcs.rpl_row_until in 
mysql-5.1 given as: 
"query 'select * from t2' failed. Table 'test.t2' doesn't exist".
In this case, the slave actually ran a couple of extra commands
as a result of which the slave first deleted the table and then
ran a select query on table, leading to the above mentioned failure.
      
=== Fix ===
    
1) Fixed the code for failure seen in rpl.rpl_row_until.
   This test was also failing although the symptoms of
   failure were different.
2) Copied the contents from rpl.rpl_row_until into
   into engines/funcs.rpl.rpl_row_until.
3) Updated engines/funcs.rpl_row_until.result accordingly.

RPL_ROTATE_LOGS has been failing sporadically in what seems a
problem related to routines that update the coordinates. However,
the test lacks proper assert statments and because of this the
debug information upon failure simply points to the content
mismatch between the test and the result file.

Not as a solution, but as a improvement to the test to better
debug this failure, new assert statments were added to the test.

@rpl_rotate_logs.test
  Added new assert statments reducing the
  dependency on the result file.

@rpl_rotate_logs.result
  Added new content to the result file to
  match the test changes

Problem: The problem with the test is that the slave returns 
         from start_slave.inc call too early before the list
         is actually actualised. This caused the slave stale 
         data to be reported.

Fix: Added a wait in the test till the slave's IO status is 
     changed to "Waiting for master to send event" which 
     which ensures the list is correctly updated.

#include "read0read.h"
for srv0srv.c and trx0rec.c.
This is only for mysql-5.5

FORMAT_DESCRIPTION_LOG_EVENT::CALC_SERVER_VERSION_SPLIT

Problem: When reading a Format_description_log_event, it supposes MySQL
version is always valid and DBUG_ASSERTION is used check the version number.
However, user may give a wrong binlog offset, even give a faked binary event
which includes an invalid MySQL version. This will cause server crash.

Fix: The assertions are removed and an error will be reported if MySQL
version in Format_description_log_event is invalid.

                           IN DEACTIVATE_DDL_LOG_ENTRY

Update of comments according to reviewers request.

revid that is being reverted: marko.makela@oracle.com-20121128070024-hb56t41limja8edz

=== Problem ===

The test is dependent on binlog positions and checks
to see if the command 'START SLAVE' functions correctly
with the 'UNTIL' clause added to it. The 'UNTIL' clause
is added to specify that the slave should start and run
until the SQL thread reaches a given point in the master
binary log or in the slave relay log.

The test uses hard coded values for MASTER_LOG_POS and
RELAY_LOG_POS, instead of extracting it using
query_get_value() function. There is a test
'rpl.rpl_row_until' which does the similar thing but uses 
query_get_value() function to set the values of
MASTER_LOG_POS/ RELAY_LOG_POS. To be precise,
rpl.rpl_row_until is a modified version of
engines/func.rpl_row_until.test.

The use of hard coded values may lead the slave to stop at a position
which may differ from the expected position in the binlog file,
an example being the failure of engines/funcs.rpl_row_until in 
mysql-5.1 given as: 
"query 'select * from t2' failed. Table 'test.t2' doesn't exist".
In this case, the slave actually ran a couple of extra commands
as a result of which the slave first deleted the table and then
ran a select query on table, leading to the above mentioned failure.

=== Fix ===

1) Fixed the code for failure seen in rpl.rpl_row_until.
   This test was also failing although the symptoms of
   failure were different.
2) Copied the contents from rpl.rpl_row_until into
   into engines/funcs.rpl.rpl_row_until.
3) Updated engines/funcs.rpl_row_until.result accordingly.

    frac is the number of decimal digits after the point
For each multiplication in the expression, decimal_mul() does this:
  to->frac= from1->frac + from2->frac;              /* store size in digits */
which will eventually overflow.
The code for handling the overflow, will truncate the two digits in "1.75" to "1"

Solution:
Truncate to 31 significant fractional digits, when doing decimal multiplication.

LESS COLUMNS THAN MASTER

Problem:
========
If DML operation requires a converstion at slave and if slave contains
less number of columns than master, slave is crashing.

Fix:
====
When Slave applies any DML operation, it sees if any of the columns 
requires conversion. If yes, it creates conversion table. 
While creating the coversion table, it should look into the actual number 
of columns required to create the table instead of getting the number
of columns from Master (size()). Columns would have dropped or added
at Slave. So the value should be min(columns@master, columns@slave)

Description: Null merge.

Description: A very large database name causes buffer
             overflow in functions acl_get() and
             check_grant_db() in sql_acl.cc. It happens
             due to an unguarded string copy operation.
             This puts required sanity checks before
             copying db string to destination buffer.

No commit message

The converted implicit lock should wait for the prior conflicting lock if found.

rb://1437 approved by Marko

The converted implicit lock should wait for the prior conflicting lock if found.

rb://1437 approved by Marko

BUF_PAGE_GET_GEN REDUNDANT?

buf_page_get_gen(): When decompressing a compressed page that had
already been accessed in the buffer pool, do not attempt to merge
buffered changes.

rb:1602 approved by Inaam Rana

 trx_undo_prev_version_build() should confirm existence of inherited (not-own) external pages.

Bug #14676084 : ROW_UNDO_MOD_UPD_DEL_SEC() DOESN'T NEED UNDO_ROW AND UNDO_EXT INITIALIZED
 mtr script could hit the assertion error !bpage->file_page_was_freed using this path.
 So, also fixed

rb://1337 approved by Marko Makela.

 trx_undo_prev_version_build() should confirm existence of inherited (not-own) external pages.

Bug #14676084 : ROW_UNDO_MOD_UPD_DEL_SEC() DOESN'T NEED UNDO_ROW AND UNDO_EXT INITIALIZED
 mtr script could hit the assertion error !bpage->file_page_was_freed using this path.
 So, also fixed

rb://1337 approved by Marko Makela.

Description: Null merge from 5.1 to 5.5

Description: Updated yassl to version 2.2.2

When a binlog is replayed into a server, e.g.:
  $ mysqlbinlog binlog.000001 | mysql
it sets a pseudo slave mode on the client connection in order to server
be able to read binlog events, there is, a format description event is
needed to correctly read following events.
Also this pseudo slave mode applies to the current connection
replication rules that are needed to correctly apply binlog events.

If a binlog dump is sourced on a connection, this pseudo slave mode will
remains after it, what will apply unexpected rules from customer
perspective to following commands.

Added a new SET statement to binlog dump that will unset pseudo slave
mode at the end of dump file.

                   MYSQLDUMP OUTPUT
      
      A patch is pushed on this bug. A result mismatch
      occured for the test main.ddl_i18n_utf8 in
      x86_64 gcov build of linux in pb2. This commit is
      to modify ddl_i18n_utf8.result to match the
      changes made for the bug.

             MYSQLDUMP OUTPUT

A patch is pushed on this bug. A result mismatch
occured for the test main.ddl_i18n_koi8r in
x86_64 gcov build of linux in pb2. This commit is
to modify ddl_i18n_koi8r.result to match the
changes made for the bug.

             MYSQLDUMP OUTPUT

Problem: mysqldump when used with option --routines, dumps
         all the routines of the specified database into
         output. The statements in this output are written
         in such a way that they are version safe using C
         style version commenting (of the format
         /*!<version num> <sql statement>*/). If a semicolon
         is present right before closing of the comment in
         dump output, it results in a syntax error while
         importing.


Solution: Version comments for dumped routines are
          specifically to protect the ones older than 5.0.
          When the import is done on 5.0 or later versions,
          entire create statement gets executed as all the
          check conditions at the beginning of the comments
          are cleared. Since the trade off is between the
          performance of newer versions which are more in
          use and protection of very old versions which are
          no longer supported, it is proposed that these
          comments be removed altogether to maintain
          stability of the versions supported.

This bug is fixed by Bug#14251529. Only testcase from the 
contribution is used.