We are trying to sort a lot of text/blob fields, 
so the buffer is indeed too small.
Memory available = thd->variables.sortbuff_size = 262144
min_sort_memory = param.sort_length*MERGEBUFF2 = 292245
So the decision to abort the query is correct.

filesort() calls my_error(), the error is reported.
But, since we have DELETE IGNORE ... the error is converted to a warning by
THD::raise_condition

filesort currently expects an error to be recorded in the THD diagnostics
area.
If we lift this restriction (remove the assert) we end up in the familiar
void Protocol::end_statement()
  default:
    DBUG_ASSERT(0);

The solution seems to be to call my_error(ME_FATALERROR) in filesort,
so that the error is propagated as an error rather than a warning.


mysql-test/r/filesort_debug.result:
  New test case.
mysql-test/t/filesort_debug.test:
  New test case.

               ENOUGH - CONCAT() HACKS. ALSO WRONG
               ERROR MESSAGE WHILE TRYING TO CREATE
               A VIEW ON A NON EXISTING DATABASE

PROBLEM:
The first part of the problem is concluded as not a
bug, as 'concat' is not a reserved word and it is
completely valid to create a view with the name
'concat'.

The second issue is, while trying to create a view on
a non existing database, we are not giving a proper error
message.

FIX:
We have added a check for the database existence while
trying to create a view. This check would give an error
as 'unknown database' when the database does not exist.

This patch is a backport of the patch for Bug#13601606


mysql-test/r/view.result:
  Added test case result of Bug#12626844
mysql-test/t/view.test:
  Added test case for Bug#12626844
sql/sql_view.cc:
  Added a check for database existence in mysql_create_view

Automerging from mysql-5.1.

Adding missing sync_slave_with_master to the test case.

Fixing waiting condition. "enter_cond" text changed in 5.5+ (when the SQL thread
is waiting for more events).

Automerge changes to the test case from mysql-5.1.

Hardening the test case:
  - including a diff_tables at the end.
  - increasing the tolerance on the relay limit size.

Manual merge from mysql-5.1 into mysql-5.5.

CONFLICTS
=========
  Text conflict in sql/log.cc
  Text conflict in sql/slave.cc

Automerge with mysql-5.1.

IN LOCK_VALIDATE()

rb://917
approved by: Marko Makela

In lock_validate() the limit is used to release the kernel_mutex during
the validation, to obey the latching order.
If we do the limit++ then we are rechecking the same lock most times on
each iteration because limit is being incremented by one and
<space, page_no> will nearly always be > limit. If we set the limit
correctly to (space, page+1) then we are actually making progress
during the iteration.

BUG#64503: mysql frequently ignores --relay-log-space-limit

When the SQL thread goes to sleep, waiting for more events, it sets
the flag ignore_log_space_limit to true. This gives the IO thread a
chance to queue some more events and ultimately the SQL thread will be
able to purge the log once it is rotated. By then the SQL thread
resets the ignore_log_space_limit to false. However, between the time
the SQL thread has set the ignore flag and the time it resets it, the
IO thread will be queuing events in the relay log, possibly going way
over the limit.

This patch makes the IO and SQL thread to synchronize when they reach
the space limit and only ask for one event at a time. Thus the SQL
thread sets ignore_log_space_limit flag and the IO thread resets it to
false everytime it processes one more event. In addition, everytime
the SQL thread processes the next event, and the limit has been
reached, it checks if the IO thread should rotate. If it should, it
instructs the IO thread to rotate, giving the SQL thread a chance to
purge the logs (freeing space). Finally, this patch removes the
resetting of the ignore_log_space_limit flag from purge_first_log,
because this is now reset by the IO thread every time it processes the
next event when the limit has been reached.

If the SQL thread is in a transaction, it cannot purge so, there is no
point in asking the IO thread to rotate. The only thing it can do is
to ask for more events until the transaction is over (then it can ask
the IO to rotate and purge the log right away). Otherwise, there would
be a deadlock (SQL would not be able to purge and IO thread would not
be able to queue events so that the SQL would finish the transaction).

truncating, inserting the same set of rows. When a table is 
re-created with the same set of rows, the data file size must
not grow.  

rb:968
Approved by Marko. 

Fix - Changed the implementation of the condition check from the result file
      to using an assert.

mysql-test/suite/rpl/r/rpl_report_port.result:
  Updated the result file.
mysql-test/suite/rpl/t/rpl_report_port.test:
  Changed from the a condtional check to an assert.

This bug has been there at least since MySQL 4.0.9. (Before 4.0.9, the
code probably was even more severely broken.)

btr_pcur_restore_position(): When cursor restoration fails, before
invoking btr_pcur_store_position() move to the previous or next record
unless cursor->rel_pos==BTR_PCUR_ON or the record was not a user
record.

This bug can cause skipped records when btr_pcur_store_position() is
called on the last record of a page. A symptom would be record count
mismatch in CHECK TABLE, or failure to find a record to delete-mark or
update or purge. The following operations should be affected by the
bug:

* row_search_for_mysql(): SELECT, UPDATE, REPLACE, CHECK TABLE,
  (almost anything else than INSERT)

* foreign key CASCADE operations

* row_merge_read_clustered_index(): index creation (since MySQL 5.1
  InnoDB Plugin)

* multi-threaded purge (after MySQL 5.5): not sure, but it might fail
  to purge some records

Not all callers of btr_pcur_restore_position() should be affected.
Anything that asserts or checks that restoration succeeds is
unaffected. For example, cursor restoration on the change buffer tree
should always succeed, because access is being protected by additional
latches. Likewise, rollback, or any code accesses data dictionary
tables while holding dict_sys->mutex should be safe.

rb:967 approved by Jimmy Yang

storage/innobase/include/sync0rw.ic:
  Prerequisite for compiling with gcc4 on solaris: ignore result from
  os_compare_and_swap_ulint
storage/myisam/mi_dynrec.c:
  Prerequisite for compiling with gcc4 on solaris: cast to void*

Post-push fixes.


mysys/stacktrace.c:
  Missing comma after "%s" format specifier.
sql/mysqld.cc:
  Move #define to signal_handler.cc
sql/signal_handler.cc:
  Missing #define UNSAFE_DEFAULT_LINUX_THREADS 200

Analysis:
========================
sql_mode "NO_BACKSLASH_ESCAPES": When user want to use backslash as character input,
instead of escape character in a string literal then sql_mode can be set to 
"NO_BACKSLASH_ESCAPES". With this mode enabled, backslash becomes an ordinary 
character like any other. 

SQL_MODE set applies to the current client session. And while creating the stored 
procedure, MySQL stores the current sql_mode and always executes the stored 
procedure in sql_mode stored with the Procedure, regardless of the server SQL 
mode in effect when the routine is invoked.  

In the scenario (for which bug is reported), the routine is created with 
sql_mode=NO_BACKSLASH_ESCAPES. And routine is executed with the invoker sql_mode
is "" (NOT SET) by executing statement "call testp('Axel\'s')".
Since invoker sql_mode is "" (NOT_SET), the '\' in 'Axel\'s'(argument to function)
is considered as escape character and column "a" (of table "t1") values are 
updated with "Axel's". The binary log generated for above update operation is as below,

  set sql_mode=XXXXXX (for no_backslash_escapes)
  update test.t1 set a= NAME_CONST('var',_latin1'Axel\'s' COLLATE 'latin1_swedish_ci');

While logging stored procedure statements, the local variables (params) used in
statements are replaced with the NAME_CONST(var_name, var_value) (Internal function) 
(http://dev.mysql.com/doc/refman/5.6/en/miscellaneous-functions.html#function_name-const)

On slave, these logs are applied. NAME_CONST is parsed to get the variable and its
value. Since, stored procedure is created with sql_mode="NO_BACKSLASH_ESCAPES", the sql_mode
is also logged in. So that at slave this sql_mode is set before executing the statements
of routine.  So at slave, sql_mode is set to "NO_BACKSLASH_ESCAPES" and then while
parsing NAME_CONST of string variable, '\' is considered as NON ESCAPE character
and parsing reported error for "'" (as we have only one "'" no backslash). 

At slave, parsing was proper with sql_mode "NO_BACKSLASH_ESCAPES".
But above error reported while writing bin log, "'" (of Axel's) is escaped with
"\" character. Actually, all special characters (n, r, ', ", \, 0...) are escaped
while writing NAME_CONST for string variable(param, local variable) in bin log 
irrespective of "NO_BACKSLASH_ESCAPES" sql_mode. So, basically, the problem is 
that logging string parameter does not take into account sql_mode value.

Fix:
========================
So when sql_mode is set to "NO_BACKSLASH_ESCAPES", escaping  characters as 
(n, r, ', ", \, 0...) should be avoided. To do so, added a check to not to
escape such characters while writing NAME_CONST for string variables in bin 
log. 
And when sql_mode is set to NO_BACKSLASH_ESCAPES, quote character "'" is
represented as ''.
http://dev.mysql.com/doc/refman/5.6/en/string-literals.html (There are several 
ways to include quote characters within a string: )

Analysis:
========================
sql_mode "NO_BACKSLASH_ESCAPES": When user want to use backslash as character input,
instead of escape character in a string literal then sql_mode can be set to 
"NO_BACKSLASH_ESCAPES". With this mode enabled, backslash becomes an ordinary 
character like any other. 

SQL_MODE set applies to the current client session. And while creating the stored 
procedure, MySQL stores the current sql_mode and always executes the stored 
procedure in sql_mode stored with the Procedure, regardless of the server SQL 
mode in effect when the routine is invoked.  

In the scenario (for which bug is reported), the routine is created with 
sql_mode=NO_BACKSLASH_ESCAPES. And routine is executed with the invoker sql_mode
is "" (NOT SET) by executing statement "call testp('Axel\'s')".
Since invoker sql_mode is "" (NOT_SET), the '\' in 'Axel\'s'(argument to function)
is considered as escape character and column "a" (of table "t1") values are 
updated with "Axel's". The binary log generated for above update operation is as below,

  set sql_mode=XXXXXX (for no_backslash_escapes)
  update test.t1 set a= NAME_CONST('var',_latin1'Axel\'s' COLLATE 'latin1_swedish_ci');

While logging stored procedure statements, the local variables (params) used in
statements are replaced with the NAME_CONST(var_name, var_value) (Internal function) 
(http://dev.mysql.com/doc/refman/5.6/en/miscellaneous-functions.html#function_name-const)

On slave, these logs are applied. NAME_CONST is parsed to get the variable and its
value. Since, stored procedure is created with sql_mode="NO_BACKSLASH_ESCAPES", the sql_mode
is also logged in. So that at slave this sql_mode is set before executing the statements
of routine.  So at slave, sql_mode is set to "NO_BACKSLASH_ESCAPES" and then while
parsing NAME_CONST of string variable, '\' is considered as NON ESCAPE character
and parsing reported error for "'" (as we have only one "'" no backslash). 

At slave, parsing was proper with sql_mode "NO_BACKSLASH_ESCAPES".
But above error reported while writing bin log, "'" (of Axel's) is escaped with
"\" character. Actually, all special characters (n, r, ', ", \, 0...) are escaped
while writing NAME_CONST for string variable(param, local variable) in bin log 
Airrespective of "NO_BACKSLASH_ESCAPES" sql_mode. So, basically, the problem is 
that logging string parameter does not take into account sql_mode value.

Fix:
========================
So when sql_mode is set to "NO_BACKSLASH_ESCAPES", escaping  characters as 
(n, r, ', ", \, 0...) should be avoided. To do so, added a check to not to
escape such characters while writing NAME_CONST for string variables in bin 
log. 
And when sql_mode is set to NO_BACKSLASH_ESCAPES, quote character "'" is
represented as ''.
http://dev.mysql.com/doc/refman/5.6/en/string-literals.html (There are several 
ways to include quote characters within a string: )



mysql-test/r/sql_mode.result:
  Added test case for Bug#12601974.
mysql-test/suite/binlog/r/binlog_sql_mode.result:
  Appended result of test cases added for Bug#12601974.
mysql-test/suite/binlog/t/binlog_sql_mode.test:
  Added test case for Bug#12601974.
mysql-test/t/sql_mode.test:
  Appended result of test cases added for Bug#12601974.

row_drop_table_for_mysql(): Really flag the indexes unavailable before
starting to drop the table.

      
This is a post commit patch for failing test on windows.

also filed as Bug#13146269, Bug#13713178

btr_get_size(): Add mtr_t parameter. Require that the caller S-latches
index->lock. If index->page==FIL_NULL or the index is to be dropped,
return ULINT_UNDEFINED to indicate that the statistics are
unavailable.

dict_update_statistics(): If btr_get_size() returns ULINT_UNDEFINED,
fake the index cardinality statistics.

dict_index_set_page(): Unused function, remove.

row_drop_table_for_mysql(): Before starting to drop the table, mark
the indexes unavailable in the data dictionary cache while holding
index->lock X-latch.

ha_innobase::prepare_drop_index(), ha_innobase::final_drop_index():
When setting index->to_be_dropped, acquire the index->lock X-latch.

rb:960 approved by Jimmy Yang

This is a post commit patch for failing test on windows.

Problem - The default port number shown in SHOW SLAVE HOSTS is always 3306 
          though the slave is actually listening on a different port number.
          This is a problem as the user can not be sure whether this port 
          value can be trusted and so client trying to read replication 
          topology can get confused.

Fix - 3306 ceases to be the default value of report-port. Moreover report-port
      does not have a static default any longer.
      Instead we initialize report-port to 0 as the new default value and change
      it based on two checks :

      1) If report_port is not set, the slave reports the port number its listening 
         on. (i.e. if report-port is not set we get the actual value of the slave's 
         port number).

      2) If report-port is set, we show the value report-port is set to, as the slave's
         port number.

mysql-test/include/show_slave_hosts.inc:
  A .inc file is added to use show slave hosts in the new test added.
mysql-test/r/mysqld--help-notwin.result:
  Updated the result file to show the default value passed for report-port.
mysql-test/suite/rpl/r/rpl_report_port.result:
  The result file for the new test that is added.
mysql-test/suite/rpl/r/rpl_show_slave_hosts.result:
  Updated the result file to show the default value passed for report-port.
mysql-test/suite/rpl/t/rpl_report_port-slave.opt:
  Option file for the new test added.
mysql-test/suite/rpl/t/rpl_report_port.test:
  Added a test to check the correct functionality of report-port. 
  We check this by running the replication twice. 
          
  In the first run we do not set the value of report-port through the opt file 
  and get the actual port number of the slave's port.
          
  We then restart the server with report-port set to some value (in this case 9000)
  and check the value reported for the slave's port number.
mysql-test/suite/sys_vars/t/report_port_basic.test:
  Update the test file to show the value for report-port. It is replaced with
  SLAVE_PORT as the actual value of the report-port will change with each run.
sql/mysqld.cc:
  Changed the value reported by report port :
          
  1. If the value for report-port is not set we assign report-port to be the 
     actual port number of the slave (mysqld_port).
  
  2. If report-port is set we get the value set for the report-port.
sql/sys_vars.cc:
  Passed 0 as the default value of the report-port.

CHECK_SIMPLE_EQUALITY

PROBLEM:
Crash in "check_simple_equality" when using a subquery with "IN" and
"ALL" in prepare.

ANALYSIS:
Crash can be reproduced using a simplified query like this one:
prepare s from "select 1 from g1 where 1 < all (
                select @:=(1 in (select 1 from g1)) from g1)";

This bug is currently present only on 5.5.and 5.1. Its fixed as part
of work log(#1110) in 5.6. We are taking one change to fix this
in 5.5 and 5.1.

Problem seems to be present because we are trying to evaluate "is_null"
on an argument which is part of a subquery
(In Item_is_not_null_test::update_used_tables()).
But the condition to evaluate is only when we do not have a sub query
present, which means to say that "with_subselect" is not set.
With respect to the above query, we create an object of type
"Item_in_optimizer" which by definition is always associated with a
subquery. While in 5.6 we set "with_subselect" to true for
"Item_in_optimizer" object, we do not do the same in 5.5. This results in
the evaluation for "is_null" resulting in a coredump.
So, we are now setting "with_subselect" to true for "Item_in_optimizer"
in 5.1 and 5.5.


mysql-test/r/func_in.result:
  Result file changes for the test case added
mysql-test/t/func_in.test:
  Test case added for Bug#13012483
sql/item_cmpfunc.h:
  Changed Item_in_optimizer::Item_in_optimizer( ) to set "with_subselect"
  to true