1. 25 Feb, 2010 1 commit
  2. 22 Feb, 2010 1 commit
    • Luis Soares's avatar
      Post-push fix for BUG#50364. · e210d409
      Luis Soares authored
      There was an erroneous parameter when calling flush_master_info
      from write_ignored_events_info_to_relay_log which could lead to a
      server crash. This happens because the I/O thread releases the
      log_lock before calling the flush_master_info.
      
      Set the function to call flush_master_info with third parameter
      to true, so that the mutex is properly taken.
      e210d409
  3. 20 Feb, 2010 4 commits
  4. 19 Feb, 2010 1 commit
  5. 18 Feb, 2010 1 commit
  6. 17 Feb, 2010 6 commits
  7. 16 Feb, 2010 1 commit
    • Serge Kozlov's avatar
      Bug#48308. · 7e888463
      Serge Kozlov authored
      1. Now test use fake_relay_log primitive
      2. Added RESET SLAVE to include/setup_fake_relay_log.inc for removing relay log info file
      3. Added RESET SLAVE to include/cleanup_fake_relay_log.inc
      4. Test moved to rpl suite as rpl_binlog_auto_inc_bug33029.test
      5. Updated result file
      7e888463
  8. 14 Feb, 2010 5 commits
  9. 12 Feb, 2010 7 commits
    • unknown's avatar
      Raise version number after cloning 5.5.2-m2 · c142ef46
      unknown authored
      c142ef46
    • Joerg Bruehe's avatar
      Automerge from central "trunk-bugfixing". · 52e16367
      Joerg Bruehe authored
      52e16367
    • Joerg Bruehe's avatar
    • Joerg Bruehe's avatar
    • Joerg Bruehe's avatar
      Upmerge the spec file alignment from 5.1 to 5.5, · 1c15c2b7
      Joerg Bruehe authored
      no other functional changes.
      1c15c2b7
    • Evgeny Potemkin's avatar
      Bug#50539: Wrong result when loose index scan is used for an aggregate · 3e0f70d2
      Evgeny Potemkin authored
                 function with distinct.
      Loose index scan is used to find MIN/MAX values using appropriate index and
      thus allow to avoid grouping. For each found row it updates non-aggregated
      fields with values from row with found MIN/MAX value.
      Without loose index scan non-aggregated fields are copied by end_send_group
      function. With loose index scan there is no need in end_send_group and
      end_send is used instead. Non-aggregated fields still need to be copied and
      this was wrongly implemented in QUICK_GROUP_MIN_MAX_SELECT::get_next.
      WL#3220 added a case when loose index scan can be used with end_send_group to
      optimize calculation of aggregate functions with distinct. In this case
      the row found by QUICK_GROUP_MIN_MAX_SELECT::get_next might belong to a next
      group and copying it will produce wrong result.
      
      Update of non-aggregated fields is moved to the end_send function from
      QUICK_GROUP_MIN_MAX_SELECT::get_next.
      
      
      mysql-test/r/group_min_max.result:
        Added a test case for the bug#50539.
      mysql-test/t/group_min_max.test:
        Added a test case for the bug#50539.
      sql/opt_range.cc:
        Bug#50539: Wrong result when loose index scan is used for an aggregate
        function with distinct.
        Update of non-aggregated fields is moved to the end_send function from
        QUICK_GROUP_MIN_MAX_SELECT::get_next.
      sql/sql_select.cc:
        Bug#50539: Wrong result when loose index scan is used for an aggregate
        function with distinct.
        Update of non-aggregated fields is moved to the end_send function from
        QUICK_GROUP_MIN_MAX_SELECT::get_next.
      3e0f70d2
    • unknown's avatar
      Bug #43913 rpl_cross_version can't pass on conflicts complainig clash with · 97afccae
      unknown authored
      --slave-load-tm
            
      The MDL_SHARED lock was introduced for an object in 5.4, but the 'TABLE_LIST' 
      object was not initialized with the MDL_SHARED lock when applying event with 
      LOAD DATA INFILE into table. So the failure is caused when checking the 
      MDL_SHARED lock for the object.
      To fix the problem, the 'TABLE_LIST' object was initialized with the MDL_SHARED 
      lock when applying event with LOAD DATA INFILE into table.
      
      
      mysql-test/suite/rpl/t/disabled.def:
        Got rid of the line for enabling 'rpl_cross_version' test.
      97afccae
  10. 11 Feb, 2010 8 commits
    • Joerg Bruehe's avatar
      Upmerge changes done to the generic spec file in 5.0 to 5.1, · 2813cd58
      Joerg Bruehe authored
      this includes a major whitespace (formatting) alignment
      and sequence changes to better agree with other spec files.
      
      Further changes:
      - All features are controlled by "%define" set from call
        options or builtin.
      - "bundled zlib" is on by default.
      - "with libgcc" is controlled by runtime detection of gcc.
      - Handling of "CFLAGS" and "CXXFLAGS" is more concentrated.
      - Several missing man pages were added.
      2813cd58
    • Magne Mahre's avatar
      Bug#50574 5.5.x allows spatial indexes on non-spatial columns, · 20379351
      Magne Mahre authored
                causing crashes!
      
      Adding a SPATIAL INDEX on a non-geometrical column caused a
      segmentation fault when the table was subsequently 
      inserted into.
            
      A test was added in mysql_prepare_create_table to explicitly
      check whether non-geometrical columns are used in a
      spatial index, and throw an error if so.
      
      
      mysql-test/t/gis.test:
        Added test cases to verify that only geometrical
        columns can get a spatial index.
                
        In addition, verify that only a single geom.
        column can participate in a spatial index.
      20379351
    • Magne Mahre's avatar
      Bug#50542 5.5.x doesn't check length of key prefixes: · 93cd02bc
      Magne Mahre authored
                corruption and crash results
            
      An index creation statement where the index key
      is larger/wider than the column it references 
      should throw an error.
            
      A statement like:
        CREATE TABLE t1 (a CHAR(1), PRIMARY KEY (A(255)))
      did not error, but a segmentation fault followed when
      an insertion was attempted on the table
            
      The partial key validiation clause has been 
      restructured to (hopefully) better document which
      uses of partial keys are valid.
      
      93cd02bc
    • Bjorn Munch's avatar
      upmerge 31602,47389,50618 · e6c93a4e
      Bjorn Munch authored
      e6c93a4e
    • Bjorn Munch's avatar
    • Bjorn Munch's avatar
      merge 31602 · f43a686e
      Bjorn Munch authored
      f43a686e
    • Bjorn Munch's avatar
      merge 47389 · 791141b9
      Bjorn Munch authored
      791141b9
    • Bjorn Munch's avatar
      Bug #47389 Innodb tests are skipped when running as unix root user · 2c026bdb
      Bjorn Munch authored
      Add --user=root to collect_mysqld_features() if running as root
      Please disregard previous commit; this is much simpler.
      2c026bdb
  11. 10 Feb, 2010 2 commits
    • Luis Soares's avatar
      BUG#50984: check_testcase fails for rpl_tmp_table_and_DDL · 5df69267
      Luis Soares authored
            
      We found that there are some tests that are not cleaning
      up properly:
            
        1. rpl_tmp_table_and_DDL
        2. rpl_do_grant
        3. rpl_sync
            
      For #1 and #2 we found that the slave would not, for some
      cases, replicate all the instructions the master processed 
      in the cleanup section. We fix these by deploying some 
      synchronization commands in the test cases so that slave 
      processes all clean up instructions.
            
      As for #3, this is tracked as part of another bug 
      (BUG@50442).
      5df69267
    • Mattias Jonsson's avatar
      Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table · dca67006
      Mattias Jonsson authored
      Problem was that in mysql-trunk the ER() macro is now dependent on current_thd
      and the innodb monitor thread has no binding to that thd object. This cause 
      the crash because of bad derefencing.
      
      Solution was to add a new macro which take the thd as an argument (which the innodb
      thread uses for the call).
      
      (Updated according to reviewers comments, i.e. added ER_THD_OR_DEFAULT and
      moved test to suite parts.)
      
      mysql-test/suite/parts/r/partition_innodb_status_file.result:
        Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
        
        New test result file
      mysql-test/suite/parts/t/partition_innodb_status_file-master.opt:
        Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
        
        New test opt file
      mysql-test/suite/parts/t/partition_innodb_status_file.test:
        Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
        
        New test.
        Note that the innodb monitor thread only runs every 15 seconds, so this
        test will take at least 15 seconds, so I have moved it to the parts suite.
      sql/sql_table.cc:
        Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
        
        Using thd safe ER macro.
      sql/unireg.h:
        Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
        
        Added ER macros for use with specified thd pointer.
      dca67006
  12. 09 Feb, 2010 3 commits