"description":"[Required] Address of remote UE server. Default port is 2152.",
"type":"string",
"default":""
},
"tx_gain":{
"title":"Tx gain",
"description":"Tx gain (in dB)",
"type":"number",
"default":60
},
"rx_gain":{
"title":"Rx gain",
"description":"Rx gain (in dB)",
"type":"number",
"default":45
},
"dl_earfcn":{
"title":"DL EARFCN",
"description":"Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type":"number",
"default":38350
},
"n_rb_dl":{
"title":"DL RB",
"description":"number of DL resource blocks",
"type":"number",
"default":100
},
"n_antenna_dl":{
"title":"Number of DL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"n_antenna_ul":{
"title":"Number of UL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"imsi":{
"title":"IMSI",
"description":"IMSI",
"type":"string",
"default":"001010123456789"
},
"k":{
"title":"K",
"description":"Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type":"string",
"default":"00112233445566778899aabbccddeeff"
},
"sim_algo":{
"title":"sim_algo",
"description":"Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type":"string",
"default":"milenage"
},
"opc":{
"title":"opc",
"description":"Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type":"string",
"default":"milenage"
},
"amf":{
"title":"amf",
"description":"Range: 0 to 65535. Set the Authentication Management Field.",
"type":"string",
"default":"0x9001"
},
"sqn":{
"title":"sqn",
"description":"Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type":"string",
"default":"000000000000"
},
"impu":{
"title":"impu",
"description":"Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type":"string",
"default":""
},
"impi":{
"title":"impi",
"description":"String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"description":"[Required] Address of remote UE server. Default port is 2152.",
"type":"string",
"default":""
},
"tx_gain":{
"title":"Tx gain",
"description":"Tx gain (in dB)",
"type":"number",
"default":60
},
"rx_gain":{
"title":"Rx gain",
"description":"Rx gain (in dB)",
"type":"number",
"default":45
},
"dl_nr_arfcn":{
"title":"DL NR ARFCN",
"description":"Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type":"number",
"default":378000
},
"nr_band":{
"title":"NR band",
"description":"NR band number",
"type":"number",
"default":39
},
"nr_bandwidth":{
"title":"Bandwidth",
"description":"Downlink Bandwidth (in MHz)",
"type":"number",
"default":40
},
"ssb_nr_arfcn":{
"title":"SSB NR ARFCN",
"description":"SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type":"number",
"default":377790
},
"n_antenna_dl":{
"title":"Number of DL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"n_antenna_ul":{
"title":"Number of UL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"imsi":{
"title":"IMSI",
"description":"IMSI",
"type":"string",
"default":"001010123456789"
},
"k":{
"title":"K",
"description":"Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type":"string",
"default":"00112233445566778899aabbccddeeff"
},
"sim_algo":{
"title":"sim_algo",
"description":"Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type":"string",
"default":"milenage"
},
"opc":{
"title":"opc",
"description":"Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type":"string",
"default":"milenage"
},
"amf":{
"title":"amf",
"description":"Range: 0 to 65535. Set the Authentication Management Field.",
"type":"string",
"default":"0x9001"
},
"sqn":{
"title":"sqn",
"description":"Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type":"string",
"default":"000000000000"
},
"impu":{
"title":"impu",
"description":"Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type":"string",
"default":""
},
"impi":{
"title":"impi",
"description":"String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"description":"[Required] Address of remote UE server. Default port is 2152.",
"type":"string",
"default":""
},
"tx_gain":{
"title":"Tx gain",
"description":"Tx gain (in dB)",
"type":"number",
"default":60
},
"rx_gain":{
"title":"Rx gain",
"description":"Rx gain (in dB)",
"type":"number",
"default":45
},
"dl_earfcn":{
"title":"DL EARFCN",
"description":"Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type":"number",
"default":38050
},
"n_rb_dl":{
"title":"DL RB",
"description":"number of DL resource blocks",
"type":"number",
"default":100
},
"n_antenna_dl":{
"title":"Number of DL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"n_antenna_ul":{
"title":"Number of UL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"imsi":{
"title":"IMSI",
"description":"IMSI",
"type":"string",
"default":"001010123456789"
},
"k":{
"title":"K",
"description":"Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type":"string",
"default":"00112233445566778899aabbccddeeff"
},
"sim_algo":{
"title":"sim_algo",
"description":"Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type":"string",
"default":"milenage"
},
"opc":{
"title":"opc",
"description":"Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type":"string",
"default":"milenage"
},
"amf":{
"title":"amf",
"description":"Range: 0 to 65535. Set the Authentication Management Field.",
"type":"string",
"default":"0x9001"
},
"sqn":{
"title":"sqn",
"description":"Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type":"string",
"default":"000000000000"
},
"impu":{
"title":"impu",
"description":"Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type":"string",
"default":""
},
"impi":{
"title":"impi",
"description":"String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"description":"[Required] Address of remote UE server. Default port is 2152.",
"type":"string",
"default":""
},
"tx_gain":{
"title":"Tx gain",
"description":"Tx gain (in dB)",
"type":"number",
"default":60
},
"rx_gain":{
"title":"Rx gain",
"description":"Rx gain (in dB)",
"type":"number",
"default":45
},
"dl_nr_arfcn":{
"title":"DL NR ARFCN",
"description":"Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type":"number",
"default":520000
},
"nr_band":{
"title":"NR band",
"description":"NR band number",
"type":"number",
"default":38
},
"nr_bandwidth":{
"title":"Bandwidth",
"description":"Downlink Bandwidth (in MHz)",
"type":"number",
"default":40
},
"ssb_nr_arfcn":{
"title":"SSB NR ARFCN",
"description":"SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type":"number",
"default":517930
},
"n_antenna_dl":{
"title":"Number of DL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"n_antenna_ul":{
"title":"Number of UL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"imsi":{
"title":"IMSI",
"description":"IMSI",
"type":"string",
"default":"001010123456789"
},
"k":{
"title":"K",
"description":"Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type":"string",
"default":"00112233445566778899aabbccddeeff"
},
"sim_algo":{
"title":"sim_algo",
"description":"Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type":"string",
"default":"milenage"
},
"opc":{
"title":"opc",
"description":"Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type":"string",
"default":"milenage"
},
"amf":{
"title":"amf",
"description":"Range: 0 to 65535. Set the Authentication Management Field.",
"type":"string",
"default":"0x9001"
},
"sqn":{
"title":"sqn",
"description":"Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type":"string",
"default":"000000000000"
},
"impu":{
"title":"impu",
"description":"Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type":"string",
"default":""
},
"impi":{
"title":"impi",
"description":"String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"description":"[Required] Address of remote UE server. Default port is 2152.",
"type":"string",
"default":""
},
"tx_gain":{
"title":"Tx gain",
"description":"Tx gain (in dB)",
"type":"number",
"default":60
},
"rx_gain":{
"title":"Rx gain",
"description":"Rx gain (in dB)",
"type":"number",
"default":45
},
"dl_earfcn":{
"title":"DL EARFCN",
"description":"Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type":"number",
"default":42590
},
"n_rb_dl":{
"title":"DL RB",
"description":"number of DL resource blocks",
"type":"number",
"default":100
},
"n_antenna_dl":{
"title":"Number of DL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"n_antenna_ul":{
"title":"Number of UL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"imsi":{
"title":"IMSI",
"description":"IMSI",
"type":"string",
"default":"001010123456789"
},
"k":{
"title":"K",
"description":"Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type":"string",
"default":"00112233445566778899aabbccddeeff"
},
"sim_algo":{
"title":"sim_algo",
"description":"Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type":"string",
"default":"milenage"
},
"opc":{
"title":"opc",
"description":"Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type":"string",
"default":"milenage"
},
"amf":{
"title":"amf",
"description":"Range: 0 to 65535. Set the Authentication Management Field.",
"type":"string",
"default":"0x9001"
},
"sqn":{
"title":"sqn",
"description":"Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type":"string",
"default":"000000000000"
},
"impu":{
"title":"impu",
"description":"Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type":"string",
"default":""
},
"impi":{
"title":"impi",
"description":"String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"description":"[Required] Address of remote UE server. Default port is 2152.",
"type":"string",
"default":""
},
"tx_gain":{
"title":"Tx gain",
"description":"Tx gain (in dB)",
"type":"number",
"default":60
},
"rx_gain":{
"title":"Rx gain",
"description":"Rx gain (in dB)",
"type":"number",
"default":45
},
"dl_nr_arfcn":{
"title":"DL NR ARFCN",
"description":"Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type":"number",
"default":632628
},
"nr_band":{
"title":"NR band",
"description":"NR band number",
"type":"number",
"default":78
},
"nr_bandwidth":{
"title":"Bandwidth",
"description":"Downlink Bandwidth (in MHz)",
"type":"number",
"default":40
},
"ssb_nr_arfcn":{
"title":"SSB NR ARFCN",
"description":"SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type":"number",
"default":632544
},
"n_antenna_dl":{
"title":"Number of DL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"n_antenna_ul":{
"title":"Number of UL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"imsi":{
"title":"IMSI",
"description":"IMSI",
"type":"string",
"default":"001010123456789"
},
"k":{
"title":"K",
"description":"Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type":"string",
"default":"00112233445566778899aabbccddeeff"
},
"sim_algo":{
"title":"sim_algo",
"description":"Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type":"string",
"default":"milenage"
},
"opc":{
"title":"opc",
"description":"Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type":"string",
"default":"milenage"
},
"amf":{
"title":"amf",
"description":"Range: 0 to 65535. Set the Authentication Management Field.",
"type":"string",
"default":"0x9001"
},
"sqn":{
"title":"sqn",
"description":"Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type":"string",
"default":"000000000000"
},
"impu":{
"title":"impu",
"description":"Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type":"string",
"default":""
},
"impi":{
"title":"impi",
"description":"String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"description":"[Required] Address of remote UE server. Default port is 2152.",
"type":"string",
"default":""
},
"tx_gain":{
"title":"Tx gain",
"description":"Tx gain (in dB)",
"type":"number",
"default":60
},
"rx_gain":{
"title":"Rx gain",
"description":"Rx gain (in dB)",
"type":"number",
"default":45
},
"dl_earfcn":{
"title":"DL EARFCN",
"description":"Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type":"number",
"default":44590
},
"n_rb_dl":{
"title":"DL RB",
"description":"number of DL resource blocks",
"type":"number",
"default":100
},
"n_antenna_dl":{
"title":"Number of DL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"n_antenna_ul":{
"title":"Number of UL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"imsi":{
"title":"IMSI",
"description":"IMSI",
"type":"string",
"default":"001010123456789"
},
"k":{
"title":"K",
"description":"Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type":"string",
"default":"00112233445566778899aabbccddeeff"
},
"sim_algo":{
"title":"sim_algo",
"description":"Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type":"string",
"default":"milenage"
},
"opc":{
"title":"opc",
"description":"Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type":"string",
"default":"milenage"
},
"amf":{
"title":"amf",
"description":"Range: 0 to 65535. Set the Authentication Management Field.",
"type":"string",
"default":"0x9001"
},
"sqn":{
"title":"sqn",
"description":"Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type":"string",
"default":"000000000000"
},
"impu":{
"title":"impu",
"description":"Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type":"string",
"default":""
},
"impi":{
"title":"impi",
"description":"String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"description":"[Required] Address of remote UE server. Default port is 2152.",
"type":"string",
"default":""
},
"tx_gain":{
"title":"Tx gain",
"description":"Tx gain (in dB)",
"type":"number",
"default":60
},
"rx_gain":{
"title":"Rx gain",
"description":"Rx gain (in dB)",
"type":"number",
"default":45
},
"dl_nr_arfcn":{
"title":"DL NR ARFCN",
"description":"Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type":"number",
"default":646666
},
"nr_band":{
"title":"NR band",
"description":"NR band number",
"type":"number",
"default":78
},
"nr_bandwidth":{
"title":"Bandwidth",
"description":"Downlink Bandwidth (in MHz)",
"type":"number",
"default":40
},
"ssb_nr_arfcn":{
"title":"SSB NR ARFCN",
"description":"SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type":"number",
"default":646656
},
"n_antenna_dl":{
"title":"Number of DL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"n_antenna_ul":{
"title":"Number of UL antennas",
"description":"Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type":"number",
"default":2
},
"imsi":{
"title":"IMSI",
"description":"IMSI",
"type":"string",
"default":"001010123456789"
},
"k":{
"title":"K",
"description":"Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type":"string",
"default":"00112233445566778899aabbccddeeff"
},
"sim_algo":{
"title":"sim_algo",
"description":"Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type":"string",
"default":"milenage"
},
"opc":{
"title":"opc",
"description":"Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type":"string",
"default":"milenage"
},
"amf":{
"title":"amf",
"description":"Range: 0 to 65535. Set the Authentication Management Field.",
"type":"string",
"default":"0x9001"
},
"sqn":{
"title":"sqn",
"description":"Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type":"string",
"default":"000000000000"
},
"impu":{
"title":"impu",
"description":"Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type":"string",
"default":""
},
"impi":{
"title":"impi",
"description":"String. Defines user IMPI. Must be fully filled with hostname if necessary.",