- 02 Nov, 2023 7 commits
-
-
Joanne Hugé authored
-
Kirill Smelkov authored
`render-templates -d` is used to remove all files that it previously generated, so that it is easy to look around during development. But, probably due to oversight, it was only *tdd files, that were removed, with *fdd generated files still left in place. -> Fix it. The list of generated files, that is now additionally removed after this patch is: instance-fdd-enb-input-schema.json instance-fdd-gnb-input-schema.json instance-fdd-lopcomm-enb-input-schema.json instance-fdd-lopcomm-gnb-input-schema.json instance-fdd-lopcomm-ue-lte-input-schema.json instance-fdd-lopcomm-ue-nr-input-schema.json instance-fdd-ors-enb-input-schema.json instance-fdd-ors-gnb-input-schema.json instance-fdd-ors-ue-lte-input-schema.json instance-fdd-ors-ue-nr-input-schema.json instance-fdd-ue-lte-input-schema.json instance-fdd-ue-nr-input-schema.json software-fdd-lopcomm.cfg software-fdd-lopcomm.cfg.json software-fdd-ors.cfg software-fdd-ors.cfg.json software-fdd.cfg software-fdd.cfg.json test/testFDD-LOPCOMM.py test/testFDD-ORS.py test/testFDD.py /cc @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge, @lu.xu /reviewed-on nexedi/slapos!1463
-
Kirill Smelkov authored
For its operation slapos-render-config mimics jinja2 templates rendering done for real in slapos. But to do so it currently duplicates the code from slapos.recipe.template. We can do the same by reusing slapos.recipe.template instead of duplicating code from there. -> Do it. The output of generated gnb.cfg is the same before and after this patch. /cc @xavier_thompson, @Daetalus /reviewed-by @jhuge, @lu.xu, @tomo /reviewed-on !1462
-
Kirill Smelkov authored
When I was first starting to look around inside ors-amarisoft software release for me it was not clear off-hand what this program is for. It should be more clear about what's the intent if there is explicit comment. /cc @xavier_thompson, @Daetalus /reviewed-by @jhuge, @lu.xu, @tomo /reviewed-on !1462
-
Kirill Smelkov authored
a6eaad9a (software/ors-amarisoft: add network_name parameter) updated enb.jinja2.cfg and gnb.jinja2.cfg to require slap_configuration['configuration.com_addr'] and other parameters to be present, but did not updated slapos-render-confg, which got broken as the result: (py3.venv) kirr@deca:~/src/wendelin/slapos/slapos/software/ors-amarisoft$ python slapos-render-config.py ... Traceback (most recent call last): File "/home/kirr/src/wendelin/slapos/slapos/software/ors-amarisoft/slapos-render-config.py", line 232, in <module> f.write(r._render().decode()) ^^^^^^^^^^^ File "/home/kirr/src/wendelin/slapos/slapos/software/ors-amarisoft/slapos-render-config.py", line 206, in _render return template_object.render(**self.context).encode(self.encoding) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/kirr/src/wendelin/venv/py3.venv/lib/python3.11/site-packages/jinja2/environment.py", line 1301, in render self.environment.handle_exception() File "/home/kirr/src/wendelin/venv/py3.venv/lib/python3.11/site-packages/jinja2/environment.py", line 936, in handle_exception raise rewrite_traceback_stack(source=source) File "config/gnb.jinja2.cfg", line 62, in top-level template code com_addr: "{{ slap_configuration['configuration.com_addr'] }}:{{ slap_configuration['configuration.com_ws_port'] }}", ^^^^^^^^^^^^^^^^^^^^^^^^^ jinja2.exceptions.UndefinedError: 'dict object' has no attribute 'configuration.com_addr' -> Fix it. /cc @xavier_thompson, @Daetalus /reviewed-by @jhuge, @lu.xu, @tomo /reviewed-on !1462
-
Kirill Smelkov authored
In multiRU we will need to be able to check multiple CPRI boards and multiple SFP ports on them, not only SFP ports on CPRI board 0 that was implicitly used until now. -> As a preparatory step the SR to explicitly specify which CPRI resources are being verified. This patch is necessary because in nexedi/slapos.toolbox!127 we adjust check_cpri_lock plugin to require CPRI device + SFP port to be explicitly specified. /cc @tomo, @xavier_thompson, @Daetalus /reviewed-by @lu.xu, @jhuge /reviewed-on nexedi/slapos!1461
-
Jérome Perrin authored
-
- 01 Nov, 2023 1 commit
-
-
Jérome Perrin authored
-
- 31 Oct, 2023 5 commits
-
-
Kirill Smelkov authored
In multiRU we will need to be able to check multiple radio units for RX saturation separately. -> As a preparatory step adjust the SR to explicitly specify the list of RX antennas to be verified. This patch is necessary because in nexedi/slapos.toolbox!126 we adjust check_rx_saturated plugin to require list of RX channels to check to be explicitly specified. /cc @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge, @lu.xu /reviewed-on nexedi/slapos!1459
-
Kirill Smelkov authored
In multiRU we will need to be able to check multiple devices and DMA channels, not only /dev/sdr0@0 that was implicitly used until now. -> As a preparatory step adjust the SR to explicitly specify which SDR resource is being verified. This patch is necessary because in nexedi/slapos.toolbox!125 we adjust check_sdr_busy plugin to require SDR device/DMA channel to be explicitly specified. /cc @lu.xu, @tomo, @xavier_thompson, @Daetalus /reviewed-by @jhuge /reviewed-on nexedi/slapos!1458
-
Jérome Perrin authored
also stop enabling pip user installation, this breaks slapos isolation too much See merge request nexedi/slapos!1464
-
Jérome Perrin authored
-
Jérome Perrin authored
This reverts commit 6f167c36. This causes issues that unexpectly slapos python processes use user installed packages. This was to accomodate python extension prompting user to install packages for them, but current version of the extension no longer seem to do this.
-
- 30 Oct, 2023 2 commits
-
-
Julien Muchembled authored
-
Jérome Perrin authored
-
- 27 Oct, 2023 2 commits
-
-
Ivan Tyagov authored
See merge request !1460
-
Ivan Tyagov authored
-
- 26 Oct, 2023 5 commits
-
-
Łukasz Nowak authored
Cover a case of not adding needless trailing / while accessing a backend from top level of the URL. As / are stripped while parsing the url, expose the situation that even if url ends with a /, it won't be sent for top level access. Here is the mapping of configured URL, path accessed on the CDN side and path sent to the backend: * backend/index.html frontend/ index.html * backend/index.html frontend/a index.html/a * backend/index.html frontend/a/ index.html/a/ * backend/index.html/ frontend/ index.html * backend/index.html/ frontend/a index.html/a * backend/index.html/ frontend/a/ index.html/a/
-
Łukasz Nowak authored
-
Łukasz Nowak authored
-
Łukasz Nowak authored
-
Kirill Smelkov authored
During my recent work I needed to use path for generated interpreter in several places and found the need to repeat ${buildout:bin-directory}/${python-interpreter:interpreter} both tiring and error-prone, because the knowledge where executable is placed is implicitly used and relied upon. On the other hand: - pygolang already provides ${gpython:exe} as reference to the place where gpython is installed (see e1d269b4) - pygolang already uses :exe for interpreter generated to accompany pyprog (see 0ee52376 and e328aa49) So python-interpreter not providing :exe is an oversight and the logical fix is to start providing python-interpreter:exe as well. -> Do it and convert */software.cfg throughout the tree, where python-interpreter is found, to use it. /cc @jerome, @Tyagov, @alain.takoudjou, @xavier_thompson, @levin.zimmermann /reviewed-on nexedi/slapos!1456
-
- 24 Oct, 2023 6 commits
-
-
Jérome Perrin authored
The new ghostscript could not decrypt some password protected files. It turned out to be a bug in ghostscript but in the process of investigating I thought it might be related to missing libidn that is also used in PDF passwords, so I added it. See merge request nexedi/slapos!1455
-
Jérome Perrin authored
Fixes decryption of some password protected PDFs
-
Jérome Perrin authored
INFO configure: WARNING: unrecognized options: --disable-threadsafe
-
Jérome Perrin authored
without libidn, decrypting password protected PDFs does not fully work.
-
Jérome Perrin authored
-
Jérome Perrin authored
-
- 23 Oct, 2023 12 commits
-
-
Thomas Gambier authored
This is a fixup of f6281e7a.
-
Łukasz Nowak authored
-
Łukasz Nowak authored
This fixes 3c514224
-
Łukasz Nowak authored
-
Łukasz Nowak authored
Since nginx 1.25.1 ssl directive has been dropped, so fix the configuration template to work with 1.25.2.
-
Łukasz Nowak authored
-
Łukasz Nowak authored
-
Łukasz Nowak authored
Update nginx-push-stream to follow nginx API changes.
-
Łukasz Nowak authored
Will support zlib 1.3+
-
Łukasz Nowak authored
-
Łukasz Nowak authored
-
Łukasz Nowak authored
-