Change-Id: I115ebce34aaf22767bb8b90b842927c133e30b65

This avoids that the result from concurrent directory reads (which
would return entries in different order) pollute kernel caches. Add a
test.

Fixes #391

Change-Id: I06a252bd

Change-Id: I144cb541

Change-Id: I1612f912dd6b113e7776b13c40f9a41038a3fd53

Signed-off-by: Alex Fishman <alex@fuse-t.org>
Change-Id: I82de5e2dd0340da4e05e4ccf1bbd162dff33b656

Darwin amd64 uses uint16 for Stat_t.mode
Signed-off-by: Alex Fishman <alex@fuse-t.org>
Change-Id: I82de5e2dd0340da4e05e4ccf1bbd162dff33b611

Change-Id: I3a67066a6660481bdab81278a91027755973b496

- provides an optional way to set e.g. Ino and/or Gen for
  the root directory when calling fs.Mount()
- provides unit test cases
- partial fix for #399

Change-Id: If45a0ec3c0ea06c0419913e34b3415808f9349da

Allows to enable the DirectMount{,Strict} flag through the cli,
facilitating testing.

Change-Id: I46e273ea68e6a81b4e7873802bc3b1c7760f56f0

Commit

	17c7e2cd loopback: show original directory in "df"

added the FsName field to MountOptions, but looks like

	d31db957 fuse: allow setting the fsname (first column in df -T)

forgot that it exists. Use it now.

This will be important for DirectMount, as passing "fsname=xxx" to
the mount syscall causes the kernel to reject with EINVAL and this
message in dmesg:

	[132274.900267] fuse: Unknown parameter 'fsname'

Change-Id: Ic1233fe9306e2ce05f85189eecceecec2baa44b7

These were open-coded before. Pull them into the struct
initializer for somewhat clearer code.

I'm doing this now as I'm about to add another option.

Change-Id: Ie04cfc9fb1f4128b8faf5c85757d7263aa77e5a0

Do what fusermount does instead of hard-coding the strings.

Change-Id: Idf18f1c5cd17b7f9db8e15e8bc5173d0f6ca41db

Two variable were defined but never used in what looks like
a copy-paste error or something.

Fix that, which also makes the tests pass.

Change-Id: Iebf48583874977c518d888d9a80bc1f02e2a7f86

Reason for adding DirectMountStrict is making the DirectMount
functionality testable, though it may have value for the user
in some cases.

Add defaultRawFileSystem & loopback tests for DirectMount
and DirectMountStrict.

The tests fail right now due to bugs in DirectMount that will be fixed
shortly:

	go-fuse/fuse$ sudo /usr/local/go/bin/go test -run TestDirectMount
	[...]
	2022/12/28 20:19:21 mountDirect: calling syscall.Mount("", "/tmp/TestDirectMount3242971772", "fuse./tmp/go-build1215740", 0x0, "fd=7,rootmode=40000,user_id=0,group_id=0")
	2022/12/28 20:19:21 mount: failed to do direct mount: invalid argument
	[...]

Change-Id: Ibfa2fa141cb43e1f8c7319233c454a3e85fa435e

Change-Id: I1aff29b88edff004f2b1cf7c36831c1767608b0d

Kernel 4.20 allows writes & reads up to 1 MiB (before: 128 kiB)
via CAP_MAX_PAGES & MaxPages.

Instead of exposing MaxPages in the API, we follow what libfuse
does, and calculate MaxPages from MaxWrite (rounding up).

Contrary to what libfuse does, we also set max_read to the same
value as MaxWrite. This prevents reads getting larger than writes
due to the rounding-up for MaxPages, which is unexpected. This
also changes the default behavoir of go-fuse, which was 64 kiB
writes, but 128 kiB for reads. Now it is 128 kiB for both.

The tests are implemented in the fs package because it's
easier there. They also test MaxReadAhead.

Tested on Linux 4.19.0 and Linux 6.1.7 via all.bash,
and on 6.1.7 also via the gocryptfs test suite.

Supersedes https://github.com/hanwen/go-fuse/pull/347

Change-Id: I5a1d4ee91945155c367888da7a90814a24a9ee6e

When ReadDirPlus is enabled, the FUSE fs has to gather a lot of additional data for every file even if it won't be used (for example when the user is doing and 'ls' or a large glob). This can cause performance problems, so it should be possible to switch to the simple ReadDir behavior for file systems where this is a bottleneck.

Change-Id: I7f2e58fe6e728a408044ce789633423f6e527554

Change-Id: If4af8e09d1921242e36a415317d390154c5c2891

Change-Id: Icb2931139a6293abaaa95623a8e130dd6f8dab0b

There is a sync.Pool leak in server.go, which triggers in case of
multi-threaded loads.

Benchmarks:

env: Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz (8core 16procs)
go test -bench="BenchmarkGoFuseRead" -benchmem

old:

2       10992 92501 ns/op 22671.71 MB/s 536981 B/op 196 allocs/op
4       19068 57959 ns/op 36183.44 MB/s 151877 B/op 170 allocs/op
8       27729 43796 ns/op 47884.39 MB/s 29068 B/op 162 allocs/op
16      28674 41403 ns/op 50651.65 MB/s 6704 B/op 160 allocs/op

fixed:

2       23667 46589 ns/op 45014.20 MB/s 5357 B/op 167 allocs/op
4       27753 42327 ns/op 49546.77 MB/s 4999 B/op 161 allocs/op
8       29648 40806 ns/op 51392.81 MB/s 4904 B/op 160 allocs/op
16      29389 40763 ns/op 51447.07 MB/s 4848 B/op 160 allocs/op

Change-Id: I062928203df5603ebca04c08c4d428d385f99c2c

The links pointed to a version of the docs from 2019.

Change-Id: I17a0739dbf23af015259ecb61493f304630548d7

Fixes rfjakob/gocryptfs#595 where we can't use gocryptfs -ro or gocryptfs -reverse on macOS because go-fuse tries to write to the read-only mountpoint during initial mount.

Fixes: #373
Change-Id: Ieadc0e074f4d803e88f9c21bb15b90eb9010afd8

OSXFUSE applies a 60-second timeout for file operations. This
is inconsistent with how FUSE works on Linux, where operations
last as long as the daemon is willing to let them run.

Change-Id: I6c042a3e785961a2c47c67e27d530bee5c50ce77

7.12 also allows usage of invalidation

Change-Id: I6e0480b7454187160f0b9f4b018386ba650048b7

These were deleted locally, but forgot to amend the commit.

Change-Id: I78c350aee09b6bb5d1a286514cae0c9a34d1396e

This library was created as a mechanism to overlay a writable checkout
for Git on top of Google's readonly SrcFS filesystem. This use case
has long disappeared, and the unionfs library appears unused
otherwise. Due to its reliance on timestamps and delays, it is very
susceptible to flakiness in tests.

Fixing this seems hard or maybe even impossible, so just remove the
library.

Change-Id: I6c594a724a0579b5c4c3aada76cd7013195fda94

Change-Id: I2b996ca3bfd1ea7e605e4dfd785cba2796340cd5

MKNOD returns an EntryOut that we can decode.

Before:

20:27:39.722507 rx 24914: MKNOD n1 {010644 (022), 0} ["pipe"] 5b
20:27:39.722546 tx 24914:     OK

After:

20: 32:39.156352 rx 38: MKNOD n1 {010644 (022), 0} ["pipe"] 5b
20: 32:39.156389 tx 38:     OK, {n3 g1 tE=1s tA=1s {M010644 SZ=0 L=1 1027:1027 B0*4096 i0:46906 A 1641756759.155157 M 1641756759.155157 C 1641756759.155157}}
Change-Id: If40e690219f20459466d7c8f9aa822c7186179dc

The readPool size was calculated from MaxWrite not taking
into account that the kernel fails all reads below 8 kiB.

Fix that by always using at least 8kiB.

Change-Id: I3bd9013be44b00bdc370bac00d00b4a106ec2d07

A later commit will allow setting MaxPages, so show it in the debug output.

Also print MaxReadahead, MaxWrite, TimeGran in decimal instead of hex -
these are neither bitfields nor addresses, so it seems clearer to have them in decimal.

Before:

22:03:50.020645 rx 2: INIT n0 {7.34 Ra 0x20000 PARALLEL_DIROPS,ASYNC_READ,EXPORT_SUPPORT,AUTO_INVAL_DATA,READDIRPLUS,NO_OPEN_SUPPORT,NO_OPENDIR_SUPPORT,EXPLICIT_INVAL_DATA,POSIX_LOCKS,DONT_MASK,SPLICE_READ,ASYNC_DIO,WRITEBACK_CACHE,HANDLE_KILLPRIV,CACHE_SYMLINKS,SPLICE_WRITE,SPLICE_MOVE,FLOCK_LOCKS,IOCTL_DIR,READDIRPLUS_AUTO,ABORT_ERROR,ATOMIC_O_TRUNC,BIG_WRITES,POSIX_ACL,MAX_PAGES,0x30000000}
22:03:50.020665 tx 2:     OK, {7.28 Ra 0x20000 AUTO_INVAL_DATA,READDIRPLUS,NO_OPEN_SUPPORT,PARALLEL_DIROPS,ASYNC_READ,MAX_PAGES,BIG_WRITES 0/0 Wr 0x2000 Tg 0x0}

After:

22: 02:51.374635 rx 2: INIT n0 {7.34 Ra 131072 POSIX_LOCKS,ATOMIC_O_TRUNC,DONT_MASK,FLOCK_LOCKS,AUTO_INVAL_DATA,READDIRPLUS_AUTO,PARALLEL_DIROPS,MAX_PAGES,ASYNC_READ,EXPORT_SUPPORT,BIG_WRITES,SPLICE_WRITE,SPLICE_READ,HANDLE_KILLPRIV,WRITEBACK_CACHE,CACHE_SYMLINKS,NO_OPENDIR_SUPPORT,EXPLICIT_INVAL_DATA,SPLICE_MOVE,IOCTL_DIR,READDIRPLUS,ASYNC_DIO,NO_OPEN_SUPPORT,POSIX_ACL,ABORT_ERROR,0x30000000}
22: 02:51.374656 tx 2:     OK, {7.28 Ra 131072 ASYNC_READ,BIG_WRITES,READDIRPLUS,NO_OPEN_SUPPORT,PARALLEL_DIROPS,AUTO_INVAL_DATA,MAX_PAGES 0/0 Wr 8192 Tg 0 MaxPages 2}
Change-Id: Iea02ad3270615d019413b3306e8a8e7282cd7c52

Change-Id: I7b8d1a6be288324021c846273aceb08eb9010e98

Since kernel 5.15, IOCTL returning ENOSYS is not allowed in overlayfs lowerdirs.
https://github.com/torvalds/linux/commit/72db82115d2bdfbfba8b15a92d91872cfe1b40c6

This commit fixes this issue by returning ENOTTY which is allowed since
https://github.com/torvalds/linux/commit/5b0a414d06c3ed2097e32ef7944a4abb644b89bd

This fixes the issue in 5.16 and later but not in 5.15.
To fully fix this, maybe we'll need to implement IOCTL.
Signed-off-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
Change-Id: Ib4a86a62e31980cd57d7153b78be82fa30190798

fusermount is (usually) from libfuse v2, and fusermount3 is from
libfuse v3, which is the actively-developed version.

Importantly, libfuse v3 added ExFAT to the list of filesystems
that users are allowed to mount on, and libfuse v2 did not.

The only ABI difference between fusermount and fusermount3 that
I am aware of is that fusermount3 dropped the allow_empty option.

Filesystems had to deal with that already, as fusermount may
also be from libfuse v3, depending on what the distro does.

This commit also adds two lines of debug output about which binary
we actually call.

Passes all.bash & the gocryptfs test suite.

Fixes https://github.com/hanwen/go-fuse/issues/394
Fixes https://github.com/rfjakob/gocryptfs/issues/626

Change-Id: Id4574fb9c8d2c812a524181a76616159256d551c

The workflow definition is adapted from gocryptfs,
that uses github actions for a month now.

Works ok as seen here:
https://github.com/rfjakob/go-fuse/actions/runs/1167431646

(except that some tests are flakey, but that's a
problem for another day).

Change-Id: Ib7aaa3b0a2f9671040fa599735aa47323d5c25d4

all.bash is broken for some time now (since the move to v2?).
Rewrite and simplify it using "./..." syntax.

And add the binaries that are generated to gitignore.

all.bash will be used in the upcomming patch for Github Actions CI.

Change-Id: Ia1b2e6bc60486b419408d4efd50bef4b8dd62bae

Unfortunately, I broke darwin with the last commit:

+ GOOS=darwin
+ GOARCH=amd64
+ go build -tags without_openssl -o /dev/null
../../../../pkg/mod/github.com/hanwen/go-fuse/v2@v2.1.1-0.20210825070001-74a933d6/fuse/server.go:122:5: undefined: parseFuseFd
../../../../pkg/mod/github.com/hanwen/go-fuse/v2@v2.1.1-0.20210825070001-74a933d6/fuse/server.go:887:5: undefined: parseFuseFd

Move parseFuseFd() to build on all archs to unbreak the build.

Change-Id: Ice173cc70a6a95765b56b444623b68ed92382052

libfuse introduced [1] a special `/dev/fd/N` syntax for the mountpoint:
It means that a privileged parent process:

 * Opened /dev/fuse
 * Called mount() on a real mountpoint directory
 * Inherited the fd to /dev/fuse to us
 * Informs us about the fd number via /dev/fd/N

This functionality is used to allow FUSE mounts inside containers
that have neither root permissions nor suid binaries [2], and
for the --drop_privileges flag of mount.fuse3 [4]

Tested with singularity and gocryptfs and actually works [3].

v2: Added doccomment for NewServer.
v3: Added specific error message on Server.Unmount().
v4: Moved mount details to package comment

[1] https://github.com/libfuse/libfuse/commit/64e11073b9347fcf9c6d1eea143763ba9e946f70
[2] https://github.com/rfjakob/gocryptfs/issues/590
[3] $ singularity run --fusemount "host:gocryptfs --extpass echo --extpass test /tmp/a /mnt" docker://ubuntu
    INFO:    Using cached SIF image
    Reading password from extpass program "echo", arguments: ["test"]
    Decrypting master key
    bash: /home/jakob/.cargo/env: No such file or directory
    bash: /home/jakob/.cargo/env: No such file or directory
    bash: /home/jakob/.cargo/env: No such file or directory
    Singularity> Filesystem mounted and ready.
[4] man mount.fuse3

Change-Id: Ibcc2464b0ef1e3d236207981b487fd9a7d94c910

Update the package comment to refer to the fs package
instead of nodefs and pathfs, which are deprecated.

Change-Id: I317e53152b63b982298a7de29120191488dcd362

This makes the function available to testing, which will
be used in the next commit.

Change-Id: I2df7aaf50748f209964da6f14764e81237d49027

We enable FUSE_CAP_ASYNC_READ per default, which means that
the kernel can (and does) submit multiple concurrent out-of-order
read requests to service userspace reads and kernel readahead.

For some backing storages, like Amazon Cloud Drive, out-of-order
reads are expensive.

gocryptfs has implemented a delay-based workaround with its
`-serialize_reads` flag for this case
(see https://github.com/rfjakob/gocryptfs/issues/92 for details).

Not enabling FUSE_CAP_ASYNC_READ makes the kernel do this for us,
as verified by adding debug output to gocryptfs, so expose it as
a mount flag in MountOptions.

Fixes: https://github.com/hanwen/go-fuse/issues/140
Graphs-at: https://github.com/hanwen/go-fuse/issues/395
Related: https://github.com/rfjakob/gocryptfs/issues/92
Change-Id: I10f947d71e1453989c4a9b66fbb0407f7163994f