1. 18 Dec, 2015 7 commits
    • Ayush Tiwari's avatar
      Jupyter: Change section name to instance-jupyter so as not to raise conflict... · bd3d8e48
      Ayush Tiwari authored
      Jupyter: Change section name to instance-jupyter so as not to raise conflict in case of multiple extends
      
      /reviewed-by @kirr  (on nexedi/slapos!33)
      bd3d8e48
    • Ayush Tiwari's avatar
      Jupyter: Publish the serialized result · 0fb4f687
      Ayush Tiwari authored
      Maintain consistency with the slapOS SR format.
      This SR can be hooked with other SR(ex:wendelin) and its better
      to follow one way of publishing result parameters
      
      [ kirr: This essentially changes publication format to JSON:
      
          $ xslapos proxy show --params
      
          # before
          slappart0: ipython_notebook (type default)
              url = https://[2001:67c:1254:e:49::952d]:8888
              monitor_url = https://[2001:67c:1254:e:49::952d]:9685
      
          # after
          slappart0: ipython_notebook (type default)
              _ = {"url": "https://[2001:67c:1254:e:49::952d]:8888", "monitor_url": "https://[2001:67c:1254:e:49::952d]:9685"}
      
        I'm not convinced we really need this, nor that the .serialized version is
        the most oftenly used one:
      
          slapos$ git grep 'slapos.cookbook:publish$' |wc -l
          59
          slapos$ git grep 'slapos.cookbook:publish.serialised$' |wc -l
          13
      
        but we can have it and see how it goes, reverting if needed ]
      
      /cc @jerome
      /proposed-for-review-on nexedi/slapos!33
      0fb4f687
    • Ayush Tiwari's avatar
      Jupyter: Set log-level alias to 'DEBUG' for ipython notebook service · 3bf1cce9
      Ayush Tiwari authored
      This helps in logging up the requests made by ipython_notebook service
      
      [ kirr: To be clear - until log-level is set to DEBUG, IPython notebook does
        not log HTTP requests, and since logging of HTTP requests is considered normal
        for most of our services (Zope, Apache, etc), it makes sense to enable such
        functionality for notebook too.
      
        There is not much additional noise produced by --log-level=DEBUG - in
        practice ipython only prints what config files it uses on startup, so this
        should be ok to go. ]
      
      /reviewed-by @kirr, @jerome  (on nexedi/slapos!33)
      3bf1cce9
    • Ayush Tiwari's avatar
      Jupyter: Hook ERP5 Kernel · 33954c66
      Ayush Tiwari authored
      ERP5 kernel basic info/workflow:
      
      1. User enters code on notebook cell and executes
      2. Code is sent to kernel via websockets
      3. Kernel sends request to ERP5
      4. Code is executed by ERP5 and the result is returned back via request.
      5. Result is received and rendered on the notebook frontend.
      6. Other message formats such as error and status are also conveyed by the Kernel.
      
      [ kirr: in IPython notebook speak kernel is something that allows IPython
        notebook server side to talk to execution backend. ERP5 kernel is a thing that
        allows ipython notbook to talk to ERP5 (with help on-ERP5-server special bt5
        installed which accepts and executes commands).
      
        The bt5 to handle notebook calls on ERP5 side - erp5-data-notebook - is
        proposed to be merged into erp5.git on nexedi/erp5!29 ]
      
      /initially-reviewed-by @kirr, @Tyagov  (in a lot of places, last time on nexedi/slapos!33)
      33954c66
    • Ayush Tiwari's avatar
      IPython Notebook: Explicitly add environment variable around wrapper and use... · 77ffa61e
      Ayush Tiwari authored
      IPython Notebook: Explicitly add environment variable around wrapper and use ipython directory inside instance in env
      
      [ kirr: By default IPython keeps configuration and other files location in
        ~/.ipython . What this patch does is organize explicit directory in instance
        tree to keep such files  ]
      
      /reviewed-by @kirr  (on nexedi/slapos!33)
      77ffa61e
    • Ayush Tiwari's avatar
      IPython Notebook: Add dynamic-template-base section for common jinja related... · 2ff9b784
      Ayush Tiwari authored
      IPython Notebook: Add dynamic-template-base section for common jinja related file section and extend them with this section
      2ff9b784
    • Ayush Tiwari's avatar
      IPython Notebook: Convert instance to jinja2 template · fbfaaef8
      Ayush Tiwari authored
      [ kirr: to-Jinja2 conversion is required because jinja is more suitable to
        describing instances compared to buildout, because jinja2 has e.g. control
        structures ]
      
      /reviewed-by @kirr  (on nexedi/slapos!33)
      fbfaaef8
  2. 16 Dec, 2015 1 commit
    • Kirill Smelkov's avatar
      wendelin: Unpin wendelin.core from versions in -dev variant · 69f30c1d
      Kirill Smelkov authored
      This is required so that buildout does not fallback to installing
      non-dev egg if version of wendelin.core from -dev differs from what has
      been pinned.
      
      For example the following
      
          [buildout]
          extends =
            https://lab.node.vifib.com/nexedi/slapos/raw/1.0.12/software/wendelin/software-dev.cfg
      
          # pin wendelin.core-dev to latest assumed-good revision with ZBlk1 support
          [wendelin.core-repository]
          revision = c507d9009f59fec2041bac9c31c5b08a48d3897d
      
      will install wendelin.core-0.4.egg from pypi instead of installing
      c507d9009f59fec2041bac9c31c5b08a48d3897d from repository, because that
      latter revision says it is already version 0.5 and 1.0.12 wendelin SR
      pins wendelin.core to 0.4 .
      
      So unpin wendelin.core from versions and let software-dev.cfg work
      always.
      
      /cc @klaus
      /reviewed-by @Tyagov  (on !36)
      69f30c1d
  3. 15 Dec, 2015 3 commits
  4. 09 Dec, 2015 5 commits
    • Rafael Monnerat's avatar
    • Kirill Smelkov's avatar
      slapos/recipe/postgresql: Do not leave half-installed postgresql instance · b7f00def
      Kirill Smelkov authored
      In case there are errors when creating cluster / setting up its
      configuration files, currently we leave pgsql database left
      half-installed and next time instantiation runs do not do anything,
      because os.path.exists(pgdata) is already true.
      
      I've personally hit this situation via providing ipv4 and ipv6
      parameters as strings and the recipe wanted to do `ipv4.join(ipv6)` but this
      works only for sets and raises for strings.
      
      What is worse is that the above error becomes hidden in our default
      setup, because webrunner tries to do instantiation _several_ times, and
      on the second run instantiation succeeds, because pgdata directory
      already exists and recipe thinks there is nothing to do _and_ webrunner
      already removed instance.log from previous run.
      
      So do not hide errors, and if we see there are problems, remove the
      wholly created pgsql database directory.
      
      /cc @kazuhiko, @jerome
      /proposed-for-review on nexedi/slapos!29
      b7f00def
    • Cédric Le Ninivin's avatar
      aeade249
    • Cédric Le Ninivin's avatar
      b5b18a4e
    • Julien Muchembled's avatar
      ERP5: sort balancer families by name before assigning ports · ba9ef609
      Julien Muchembled authored
      If the list of families does not change, their ports must not change, and it's
      wrong to get this by relying on CPython implementation details. Even if we
      automated the update of frontends with new urls, this couldn't be done
      atomically and we'd get random failures.
      
      Currently, frontends are only updated manually so we also want to minimize
      changes when families are added/renamed/removed. By sorting alphabetically,
      we have something predictable. Of course, this does not cover cases like the
      following one:
      - before: A, B, C
      - after: A, C
      Even if we added a 'port-base' parameter for the balancer, the port would
      change for one of the 2 families.
      
      We have no need for the moment, but we could go further with an optional list
      parameter to choose the order, and a special value to skip ports. Another
      option is to use publish-early but it's more complicated to implement and
      we lose everything when we reinstanciate.
      
      The sort in haproxy.cfg.in is for the stats page.
      ba9ef609
  5. 08 Dec, 2015 1 commit
  6. 07 Dec, 2015 10 commits
  7. 04 Dec, 2015 4 commits
  8. 03 Dec, 2015 3 commits
  9. 02 Dec, 2015 1 commit
  10. 01 Dec, 2015 1 commit
  11. 30 Nov, 2015 1 commit
  12. 27 Nov, 2015 3 commits