Skip to content

slapos
slapos
Commit ed138c6e authored by Kirill Smelkov's avatar Kirill Smelkov
Browse files
Options

software/ors-amarisoft: MultiRU 

Hello up there. This merge-request brings in major update to ors-amarisoft
software release: first eNB is significantly restructured to prepare base for
further changes, and then we add support for working with multiple radio units
and multiple cells with all LTE/NR and FDD/TDD simultaneously. All kinds of
Carrier Aggregation - LTE+LTE, NR+NR and LTE+NR are now supported. All kinds of
Handover - Intra-ENB, Inter-ENB with LTE→NR and NR→LTE are now supported as
well. UE simulator is also updated to support multiple radio units, cells and
UEs. In the new system configuration of RU, CELL, PEERCELL, PEER and UE objects
are done via shared instances attached to the main eNB or UEsim instance.

Most of the parameters become runtime settings instead of being static choice
of particular software template. There is no longer multiple rendered
softwares - all that remain is

1. `software.cfg` for generic software, and
2. `software-ors.cfg` for ORS.

Switching to configuring things at runtime became possible because SlapOS Master
recently switched to new JSON-editor with support for `oneOf`, arrays and
conditionals - bits that make it possible to configure settings in the WEB UI
with multiple choices for e.g. RF mode, cell or radio unit type.

For ORS full backward compatibility is preserved via special proxy which
translates ORS input schema to configuration objects of the new generic eNB.
Since most our current ORS deployments are TDD, `software-tdd-ors.cfg` link to
`software-ors.cfg` is also provided to preserve backward compatibility at
software-release URL level for those instances.

eNB and gNB are merged along the way. Unittests are improved. JSON schemas
become primary source for defaults(*). Unnecessary parameters are removed and
are now computed automatically. For example it is no longer needed to
explicitly specify SSB NR-ARFCN for peer NR cell, or `txa0cc00_center_frequency`
for Lopcomm RU. `tx_gain` and `rx_gain` become generic parameters that
semantically apply uniformly to all Radio Units.

A protection against buildout code injection via specially-crafted references
of shared instances is installed. The problem was noticed because instantiation
was failing with spaces in the references - a condition that is present by
default on the testnodes. Solving the problem generally via custom "buildout
encoding" was not hard and probably the solution might be useful not only for
ors-amarisoft software release. Please see the patch `"Protect from buildout
code injection"` for details.

There are more minor enhancements and bug fixes in there.

Please see individual patches for details.

Kirill

/cc @jhuge, @lu.xu, @xavier_thompson, @Daetalus
/approved-by @tomo
/reviewed-on nexedi/slapos!1533

(*) this goes in line with similar design choice to make JSON schemas primary
    source of defaults in Rapid-CDN: nexedi/slapos!1380 .
parents 7989e6ce acd01805
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 5061 additions and 10118 deletions
software/ors-amarisoft/README.md
View file @ ed138c6e
......@@ -9,29 +9,6 @@ How to deploy from scratch
2. Install ors playbook
3. Deploy this SR
## Generated buildout configurations and json input schemas
Since there are multiple ors-amarisoft softwares releases and software types, the following files are
generated with jinja2 templates with the render-templates script before being pushed to gitlab:
* instance-tdd-enb-input-schema.json
* instance-fdd-enb-input-schema.json
* software-fdd.cfg
* software-tdd.cfg.json
* instance-fdd-ue-nr-input-schema.json
* instance-tdd-gnb-input-schema.json
* instance-tdd-ue-nr-input-schema.json
* test/testFDD.py
* test/testTDD.py
* software-tdd.cfg
* instance-tdd-ue-lte-input-schema.json
* instance-fdd-gnb-input-schema.json
* software-fdd.cfg.json
* instance-fdd-ue-lte-input-schema.json
These files should not be modified directly, and the render-templates scripts should be run along
with update-hash before each commit.
## Services
We run 2 binaries from Amarisoft LTE stack:
......
software/ors-amarisoft/buildout.hash.cfg
View file @ ed138c6e
......@@ -16,19 +16,19 @@
[template]
filename = instance.cfg
md5sum = fa81cd744e5a9382aa203c3777adc3a8
md5sum = 22e06207fab996bcc1c26992106618ab
[template-ors]
filename = instance-ors.cfg
md5sum = 56a2c2b8245e86f3a8ed2eebeb8e88d9
md5sum = f5c76c3443b75569eb18503dce38e783
[slaplte.jinja2]
_update_hash_filename_ = slaplte.jinja2
md5sum = 566efd38f12e6d42769399f421e77d6c
md5sum = 871ade334f445e22d6cb473e4d4e3522
[ru_amarisoft-stats.jinja2.py]
_update_hash_filename_ = ru/amarisoft-stats.jinja2.py
md5sum = c4d5e9fcf460d88bc2b4bcfbdfe554f7
md5sum = 674dcc250c0b6bb43d8546624552fc5d
[ru_amarisoft-rf-info.jinja2.py]
_update_hash_filename_ = ru/amarisoft-rf-info.jinja2.py
......@@ -36,19 +36,19 @@ md5sum = ab666fdfadbfc7d8a16ace38d295c883
[ru_libinstance.jinja2.cfg]
_update_hash_filename_ = ru/libinstance.jinja2.cfg
md5sum = 30c262a427de2132d6d66d9fb3597426
md5sum = 2dda7713832be83d94522c7abb4901f9
[ru_sdr_libinstance.jinja2.cfg]
_update_hash_filename_ = ru/sdr/libinstance.jinja2.cfg
md5sum = de71c63b8df940207409de7e948f7c8c
md5sum = b7906ca3a6b17963f78f680fc0842b74
[ru_lopcomm_libinstance.jinja2.cfg]
_update_hash_filename_ = ru/lopcomm/libinstance.jinja2.cfg
md5sum = 71508d94a47db493f30af30188c48d64
md5sum = 41ea7248b54ea893cb83a01655018711
[ru_sunwave_libinstance.jinja2.cfg]
_update_hash_filename_ = ru/sunwave/libinstance.jinja2.cfg
md5sum = c855ee7a6132899eb53b8d80ec27701a
md5sum = bc5d82b8737b6990674b280ef2774be7
[ru_lopcomm_ncclient_common.py]
_update_hash_filename_ = ru/lopcomm/ncclient_common.py
......@@ -78,25 +78,29 @@ md5sum = 2b08bb666c5f3ab287cdddbfdb4c9249
_update_hash_filename_ = ru/tapsplit
md5sum = 700aab566289619fb83ac6f3b085d983
[ru_xbuildout.py]
_update_hash_filename_ = ru/xbuildout.py
md5sum = a51171f926edd315a52841c2e7eb9fb7
[ru_capdo.c]
_update_hash_filename_ = ru/capdo.c
md5sum = 52da9fe3a569199e35ad89ae1a44c30e
[template-enb]
_update_hash_filename_ = instance-enb.jinja2.cfg
md5sum = c8096440bfc2a1ed0e2821ef71e0bd1c
md5sum = f54bdbb308aee424b07ede8b551cfe5b
[template-ors-enb]
_update_hash_filename_ = instance-ors-enb.jinja2.cfg
md5sum = f1e6e2fb8854482d570fc3eee4935f84
md5sum = 601d6237059fa665d3f3ffb6a78ad9ca
[template-core-network]
_update_hash_filename_ = instance-core-network.jinja2.cfg
md5sum = c807be73b9304f5a4c7483a3776bbc17
md5sum = 9402b750221765b6b124cf5ecb3e520c
[template-ue]
_update_hash_filename_ = instance-ue.jinja2.cfg
md5sum = d8153dd5e0978afea018498b29f06fd5
md5sum = 812a43458c21f7d0cdb2141515a236ae
[template-obsolete]
_update_hash_filename_ = instance-obsolete.jinja2.cfg
......@@ -108,19 +112,19 @@ md5sum = dcaac06553a3222b14c0013a13f4a149
[enb.jinja2.cfg]
filename = config/enb.jinja2.cfg
md5sum = a7f898b48b15992b2c4a64a925f007aa
md5sum = 30a26b975100b1af8937dfe3a7f5f496
[drb_lte.jinja2.cfg]
filename = config/drb_lte.jinja2.cfg
md5sum = 6c8bdb0ce1d2bdd846a87aa6c5204a9c
md5sum = 01eb971e2ff580da52291138495a81ca
[drb_nr.jinja2.cfg]
filename = config/drb_nr.jinja2.cfg
md5sum = 84d3cef8fc7f1c2aed7c348d500f5636
md5sum = 282b11d7b72b01b8325df4632d82b84d
[sib23.jinja2.asn]
filename = config/sib23.jinja2.asn
md5sum = 0d709fafde394dc05441d110c2e41858
md5sum = 959523597e29b048e45ebf58f7ea4c5b
[mme.jinja2.cfg]
filename = config/mme.jinja2.cfg
......@@ -132,7 +136,7 @@ md5sum = f167b4be5e327b276b42267e0678f577
[ru_dnsmasq.jinja2.cfg]
_update_hash_filename_ = ru/dnsmasq.jinja2.cfg
md5sum = 9bd5b08f23640f71ad109d186d060f2d
md5sum = 95f4f8fb85e0480eb3e9059b9db26540
[ims.jinja2.cfg]
filename = config/ims.jinja2.cfg
......@@ -140,7 +144,7 @@ md5sum = 36281b03597252cf75169417d02fc28c
[ue.jinja2.cfg]
filename = config/ue.jinja2.cfg
md5sum = 1d55e896236f7ee08a10cd58182a9a76
md5sum = 62291a11fd36a42464901cdc81338687
[ru_lopcomm_CreateProcessingEle.jinja2.xml]
_update_hash_filename_ = ru/lopcomm/CreateProcessingEle.jinja2.xml
......@@ -148,7 +152,7 @@ md5sum = e435990eb0a0d4be41efa9bd16dce09b
[ru_lopcomm_cu_config.jinja2.xml]
_update_hash_filename_ = ru/lopcomm/cu_config.jinja2.xml
md5sum = 09123ad68c6d8e7e4e201bcc2ab331c6
md5sum = 346c911e1ac5e5001a39c8926b44c91e
[software.cfg.html]
_update_hash_filename_ = gadget/software.cfg.html
......
software/ors-amarisoft/cell/common.json 0 → 100644
View file @ ed138c6e
{
"$schema": "https://json-schema.org/draft/2020-12/schema",
"title": "Cell. Common properties",
"type": "object",
"required": [
"cell_type",
"rf_mode",
"pci",
"cell_id",
"bandwidth",
"ru"
],
"properties": {
"cell_type": {
"type": "string",
"options": { "hidden": true }
},
"cell_kind": {
"type": "string",
"const": "enb",
"template": "enb",
"options": { "hidden": true }
},
"rf_mode": {
"title": "RF mode",
"description": "Mode for TX/RX radio multiplexing: Frequency- or Time- Domain Division",
"type": "string",
"enum": ["fdd", "tdd"],
"propertyOrder": 101
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID",
"type": "integer"
},
"cell_id": {
"title": "Cell ID",
"description": "Cell ID",
"type": "string"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number"
},
"root_sequence_index": {
"title": "Root Sequence Index",
"type": "integer"
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"ru": {
"$ref": "#/$defs/ru-of-cell",
"propertyOrder": 9999
}
},
"$defs": {
"ru-of-cell": {
"title": "Radio Unit",
"oneOf": [
{
"title": "Shared Radio Unit",
"description": "Use radio unit defined in separate shared instance",
"type": "object",
"required": ["ru_type", "ru_ref"],
"properties": {
"ru_type": {
"const": "ru_ref",
"template": "ru_ref",
"options": { "hidden": true }
},
"ru_ref": {
"title": "RU Reference",
"description": "Reference of shared radio unit instance",
"type": "string"
}
}
},
{
"title": "Shared Radio Unit of a Cell",
"description": "Use the same radio unit as referenced cell instance does",
"type": "object",
"required": ["ru_type", "ruincell_ref"],
"properties": {
"ru_type": {
"const": "ruincell_ref",
"template": "ruincell_ref",
"options": { "hidden": true }
},
"ruincell_ref": {
"title": "Cell Reference",
"description": "Reference of cell instance whose radio unit to share",
"type": "string"
}
}
},
{ "$ref": "../ru/input-schema.json" }
]
}
}
}
software/ors-amarisoft/cell/input-schema.json 0 → 100644
View file @ ed138c6e
{
"$schema": "https://json-schema.org/draft/2020-12/schema",
"title": "Cell",
"type": "object",
"oneOf": [
{ "$ref": "../cell/lte/input-schema.json" },
{ "$ref": "../cell/nr/input-schema.json" }
]
}
software/ors-amarisoft/cell/lte/input-schema.json 0 → 100644
View file @ ed138c6e
{
"$schema": "https://json-schema.org/draft/2020-12/schema",
"title": "LTE Cell",
"type": "object",
"required": [
"cell_type",
"rf_mode",
"pci",
"cell_id",
"bandwidth",
"ru",
"dl_earfcn",
"tac"
],
"properties": {
"$ref": "../../cell/common.json#/properties",
"cell_type": {
"$ref": "#/properties/cell_type",
"const": "lte",
"template": "lte"
},
"tdd_ul_dl_config": {
"title": "TDD Configuration",
"type": "string",
"enum": [
"[Configuration 2] 5ms 2UL 6DL (default)",
"[Configuration 6] 5ms 5UL 3DL (maximum uplink)"
],
"default": "[Configuration 2] 5ms 2UL 6DL (default)",
"options": {
"dependencies": {
"rf_mode": "tdd"
}
}
},
"bandwidth": {
"$ref": "#/properties/bandwidth",
"enum": [
1.4,
3,
5,
10,
15,
20
]
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "integer"
},
"ul_earfcn": {
"title": "UL EARFCN",
"description": "Uplink E-UTRA Absolute Radio Frequency Channel Number of the cell. By default a frequency corresponding to dl_earfcn is chosen.",
"type": "integer"
},
"tac": {
"title": "Tracking Area Code",
"description": "Tracking Area Code in hexadecimal representation (range 0x0000 to 0xffff)",
"type": "string"
},
"root_sequence_index": {
"$ref": "#/properties/root_sequence_index",
"description": "Range: 0 to 837. Set the PRACH root sequence index (SIB2.rootSequenceIndex field). It must be different for each neighbour cell operating on the same frequency and sharing the same PRACH configuration.",
"default": 204
}
}
}
software/ors-amarisoft/cell/nr/input-schema.json 0 → 100644
View file @ ed138c6e
{
"$schema": "https://json-schema.org/draft/2020-12/schema",
"title": "NR Cell",
"type": "object",
"required": [
"cell_type",
"rf_mode",
"pci",
"cell_id",
"bandwidth",
"ru",
"dl_nr_arfcn",
"nr_band"
],
"properties": {
"$ref": "../../cell/common.json#/properties",
"cell_type": {
"$ref": "#/properties/cell_type",
"const": "nr",
"template": "nr"
},
"tdd_ul_dl_config": {
"title": "TDD Configuration",
"type": "string",
"enum": [
"5ms 2UL 7DL 4/6 (default)",
"2.5ms 1UL 3DL 2/10",
"5ms 8UL 1DL 2/10 (maximum uplink)"
],
"default": "5ms 2UL 7DL 4/6 (default)",
"options": {
"dependencies": {
"rf_mode": "tdd"
}
}
},
"bandwidth": {
"$ref": "#/properties/bandwidth"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "integer"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "integer"
},
"ul_nr_arfcn": {
"title": "UL NR ARFCN",
"description": "Uplink NR Absolute Radio Frequency Channel Number of the cell. By default a frequency corresponding to dl_nr_arfcn and nr_band is chosen.",
"type": "integer"
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR Absolute Radio Frequency Channel Number of the cell. If set it must be an element of global synchronization raster and be at offset from center DL frequency that aligns with SSB subcarrier spacing of selected band. By default a valid frequency nearby dl_nr_arfcn is chosen.",
"type": "integer"
},
"ssb_pos_bitmap": {
"title": "SSB Position Bitmap",
"description": "SSB position bitmap in bits (4, 8 or 64 bits depending on the DL frequency).",
"type": "string",
"default": "10000000"
},
"root_sequence_index": {
"$ref": "#/properties/root_sequence_index",
"description": "Range 0 to 837 for PRACH format up to 3, 0 to 137 otherwise. prach-RootSequenceIndex parameter. It must be different for each neighbour cell operating on the same frequency and sharing the same PRACH configuration.",
"default": 1
}
},
"$defs": {
"tac": {
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
}
}
}
software/ors-amarisoft/cell/schema.json 0 → 100644
View file @ ed138c6e
{
"$schema": "https://json-schema.org/draft/2020-12/schema",
"description": "Values returned by Cell instantiation (stub)",
"type": "object",
"properties": {}
}
software/ors-amarisoft/config/drb_lte.jinja2.cfg
View file @ ed138c6e
// DRB configuration for LTE cell.
{%- set B = xbuildout.encode -%}
// DRB configuration for LTE cell {{ B(cell_ref) }} @ {{ B(ru_ref) }}.
// DRB configuration vary in beteen FDD and TDD modes.
{% set T_REORDERING = {'fdd': 35, 'tdd': 65} [rf_mode] %}
// {{ rf_mode | upper }} T_REORDERING={{ T_REORDERING }}
{% set T_REORDERING = {'fdd': 35, 'tdd': 65} [cell.rf_mode] %}
// {{ cell.rf_mode | upper }} T_REORDERING={{ T_REORDERING }}
[
{
......
software/ors-amarisoft/config/drb_nr.jinja2.cfg
View file @ ed138c6e
// DRB configuration for NR cell.
{%- set B = xbuildout.encode -%}
// DRB configuration for NR cell {{ B(cell_ref) }} @ {{ B(ru_ref) }}.
[
{
......
software/ors-amarisoft/config/sib23.jinja2.asn
View file @ ed138c6e
{%- set B = xbuildout.encode -%}
/* SIB2/SIB3 for {{ cell.cell_type | upper }} cell {{ B(cell_ref) }} @ {{ B(ru_ref) }}. */
{
message c1: systemInformation: {
criticalExtensions systemInformation-r8: {
......@@ -38,9 +40,9 @@
pdsch-ConfigCommon {
{% if ors %}
{%- if ors['one-watt'] %}
referenceSignalPower {{ (tx_gain | int) - 54 }}, /* patched by eNB */
referenceSignalPower {{ (ru.tx_gain | int) - 54 }}, /* patched by eNB */
{%- else %}
referenceSignalPower {{ (tx_gain | int) - 35 }}, /* patched by eNB */
referenceSignalPower {{ (ru.tx_gain | int) - 35 }}, /* patched by eNB */
{%- endif %}
{% else %}
referenceSignalPower -8, /* patched by eNB */
......
software/ors-amarisoft/config/ue.jinja2.cfg
View file @ ed138c6e
{#- do_lte/do_nr indicate whether we have LTE or NR UE/cells #}
{%- do assert(do_lte or do_nr) %}
{%- do assert(not (do_lte and do_nr)) %}
{%- import 'slaplte.jinja2' as slaplte with context %}
{%- set B = slaplte.B %}
{%- set J = slaplte.J %}
{%- set jcell_ru_ref = slaplte.jcell_ru_ref %}
{#- for standalone testing via slapos-render-config.py
NOTE: keep in sync with instance-ue.jinja2.cfg and ru/libinstance.jinja2.cfg #}
{%- if _standalone is defined %}
{%- set iru_dict = {} %}
{%- set icell_dict = {} %}
{%- set iue_dict = {} %}
{%- do slaplte.load_iru_and_icell(iru_dict, icell_dict, icell_kind='ue') %}
{%- do slaplte.load_iue(iue_dict) %}
{%- do slaplte.check_loaded_everything() %}
{%- endif %}
{#- start of the config -#}
{
log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,rrc.level=debug,rrc.max_size=1,phy.level=info,file.rotate=1G,file.path=/dev/null",
log_filename: "{{ directory['log'] }}/ue.log",
......@@ -9,72 +23,98 @@
rue_bind_addr: "{{ pub_info['rue_bind_addr'] }}",
com_addr: "{{ pub_info['com_addr'] }}",
rf_driver: {
name: "sdr",
args: "dev0=/dev/sdr0",
rx_antenna:"tx_rx",
},
tx_gain: {{ slapparameter_dict.get('tx_gain', 60) }},
rx_gain: {{ slapparameter_dict.get('rx_gain', 40) }},
cell_groups: [
{%- if do_lte %}
{
// LTE cell
{# instantiate radio units #}
{{ slaplte.ru_config(iru_dict, slapparameter_dict) }}
cell_groups: [{
// LTE cells
group_type: "lte",
multi_ue: true,
cells: [
{
bandwidth: {{ slapparameter_dict.get('bandwidth', slap_configuration['configuration.default_lte_bandwidth']) .removesuffix(' MHz') }},
dl_earfcn: {{ slapparameter_dict.get('dl_earfcn', 0) }},
n_antenna_dl: {{ slapparameter_dict.get('n_antenna_dl', slap_configuration['configuration.default_n_antenna_dl']) }},
n_antenna_ul: {{ slapparameter_dict.get('n_antenna_ul', slap_configuration['configuration.default_n_antenna_ul']) }},
global_timing_advance: -1,
}
{%- for cell_ref, icell in icell_dict|dictsort %}
{%- set cell = icell['_'] %}
{%- if cell.cell_type == 'lte' %}
{%- set ru_ref = J(jcell_ru_ref(icell)) %}
{%- set iru = iru_dict[ru_ref] %}
{%- set ru = iru['_'] %}
// {{ B(cell_ref) }}
{
rf_port: {{ ru._rf_port }},
n_antenna_dl: {{ ru.n_antenna_dl }},
n_antenna_ul: {{ ru.n_antenna_ul }},
dl_earfcn: {{ cell.dl_earfcn }},
ul_earfcn: {{ cell.ul_earfcn }},
bandwidth: {{ cell.bandwidth }},
global_timing_advance: -1,
},
{%- endif %}
{%- endfor %}
],
pdcch_decode_opt: false,
pdcch_decode_opt_threshold: 0.1,
},
{%- endif %}
{%- if do_nr %}
{
// NR cell
}, {
// NR cells
group_type: "nr",
multi_ue: false,
cells: [{
rf_port: 0,
bandwidth: {{ slapparameter_dict.get('bandwidth', slap_configuration['configuration.default_nr_bandwidth']) }},
band: {{ slapparameter_dict.get('nr_band', 0) }},
dl_nr_arfcn: {{ slapparameter_dict.get('dl_nr_arfcn', 0) }},
ssb_nr_arfcn: {{ slapparameter_dict.get('ssb_nr_arfcn', 0) }},
subcarrier_spacing: 30,
n_antenna_dl: {{ slapparameter_dict.get('n_antenna_dl', slap_configuration['configuration.default_n_antenna_dl']) }},
n_antenna_ul: {{ slapparameter_dict.get('n_antenna_ul', slap_configuration['configuration.default_n_antenna_ul']) }},
}
],
},
{%- endif %}
],
multi_ue: true,
cells: [
{%- for cell_ref, icell in icell_dict|dictsort %}
{%- set cell = icell['_'] %}
{%- if cell.cell_type == 'nr' %}
{%- set ru_ref = J(jcell_ru_ref(icell)) %}
{%- set iru = iru_dict[ru_ref] %}
{%- set ru = iru['_'] %}
// {{ B(cell_ref) }}
{
rf_port: {{ ru._rf_port }},
n_antenna_dl: {{ ru.n_antenna_dl }},
n_antenna_ul: {{ ru.n_antenna_ul }},
band: {{ cell.nr_band }},
dl_nr_arfcn: {{ cell.dl_nr_arfcn }},
ul_nr_arfcn: {{ cell.ul_nr_arfcn }},
ssb_nr_arfcn: {{ cell.ssb_nr_arfcn }},
bandwidth: {{ cell.bandwidth }},
subcarrier_spacing: {{ cell.subcarrier_spacing }},
},
{%- endif %}
{%- endfor %}
]
}],
ue_list: [
{%- for ue_ref, iue in iue_dict|dictsort %}
{%- set ue = iue['_'] %}
// {{ B(ue_ref) }}
{
sim_algo: "{{ slapparameter_dict.get('sim_algo', 'milenage') }}",
opc: "{{ slapparameter_dict.get('opc', '') }}",
amf: {{ slapparameter_dict.get('amf', '0x9001') }},
sqn: "{{ slapparameter_dict.get('sqn', '000000000000') }}",
impu: "{{ slapparameter_dict.get('impu', '') }}",
impi: "{{ slapparameter_dict.get('impi', '') }}",
{%- if do_lte %}
imsi: "{{ slapparameter_dict.get('imsi', slap_configuration['configuration.default_lte_imsi']) }}",
K: "{{ slapparameter_dict.get('k', slap_configuration['configuration.default_lte_k']) }}",
ue_category: 12,
{%- endif %}
{%- if do_nr %}
imsi: "{{ slapparameter_dict.get('imsi', slap_configuration['configuration.default_nr_imsi']) }}",
K: "{{ slapparameter_dict.get('k', slap_configuration['configuration.default_nr_k']) }}",
as_release: 15,
ue_category: "nr",
{%- endif %}
rue_addr: "{{ slapparameter_dict.get('rue_addr', '') }}",
tun_setup_script: "ue-ifup",
apn: "internet",
}
sim_algo: "{{ ue.sim_algo }}",
opc: "{{ ue.opc }}",
amf: {{ ue.amf }},
sqn: "{{ ue.sqn }}",
impu: "{{ ue.impu }}",
impi: "{{ ue.impi }}",
imsi: "{{ ue.imsi }}",
K: "{{ ue.k }}",
rue_addr: "{{ ue.rue_addr }}",
{%- if ue.ue_type == 'lte' %}
as_release: 13,
ue_category: 13,
{%- elif ue.ue_type == 'nr' %}
as_release: 15,
ue_category: "nr",
{%- else %}
{%- do bug('unreachable') %}
{%- endif %}
tun_setup_script: "ue-ifup",
apn: "internet",
},
{%- endfor %}
],
}
software/ors-amarisoft/instance-core-network-schema.json 0 → 100644
View file @ ed138c6e
{
"$schema": "http://json-schema.org/draft-04/schema",
"description": "Values returned by Core Network instantiation (stub)",
"type": "object",
"properties": {}
}
software/ors-amarisoft/instance-core-network.jinja2.cfg
View file @ ed138c6e
......@@ -183,7 +183,7 @@ context =
section directory directory
section slap_configuration slap-configuration
key slapparameter_dict slap-configuration:configuration
key gtp_addr_v6 slap-configuration:ipv6-random
raw gtp_addr_v6 {{ my_ipv6 }}
raw gtp_addr_v4 {{ lan_ipv4 }}
import netaddr netaddr
key ifup_empty mme-ifup-empty:wrapper-path
......@@ -245,7 +245,7 @@ password = {{ slapparameter_dict['monitor-password'] | string }}
[publish-connection-information]
<= monitor-publish
recipe = slapos.cookbook:publish.serialised
core-network-ipv6 = ${slap-configuration:ipv6-random}
core-network-ipv6 = {{ my_ipv6 }}
core-network-ipv4 = {{ lan_ipv4 }}
amarisoft-version = {{ lte_version }}
license-expiration = {{ lte_expiration }}
......
software/ors-amarisoft/instance-fdd-enb-input-schema.json → software/ors-amarisoft/instance-enb-input-schema.json
View file @ ed138c6e
......@@ -3,87 +3,16 @@
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth",
"type": "string",
"enum": [
"1.4 MHz",
"3 MHz",
"5 MHz",
"10 MHz",
"15 MHz",
"20 MHz"
],
"default": "20 MHz"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "1, 2, 4 or 8. Number of DL antennas.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "1, 2, 4 or 8. Number of UL antennas.",
"type": "number",
"default": 2
},
"sdr_number": {
"title": "SDR Number",
"description": "SDR Number",
"type": "number",
"default": 0
},
"cpri_port": {
"title": "CPRI Port Number",
"description": "CPRI Port Number",
"type": "number",
"default": 0
},
"cell_list": {
"title": "Cell List",
"description": "Cell List",
"patternProperties": {
".*": {
"properties": {
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell IDs",
"type": "number"
},
"cell_id": {
"title": "Cell ID",
"description": "Cell IDs",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
"user-authorized-key": {
"title": "User Authorized Key",
"description": "SSH public key in order to connect to the SSH server of this instance.",
"textarea": true,
"type": "string"
},
"enb_id": {
"title": "eNB ID",
"description": "eNB ID",
"type": "string",
"default": "0x1A2D0"
"description": "eNB ID. (must be set if there are LTE cells)",
"type": "string"
},
"gtp_addr": {
"title": "GTP Address",
......@@ -93,7 +22,7 @@
},
"mme_list": {
"title": "MME list",
"description": "Optionnal. List of MME to which the gNodeB is connected",
"description": "List of MME to which the eNodeB is connected. (must be set if there are LTE cells)",
"patternProperties": {
".*": {
"properties": {
......@@ -106,17 +35,15 @@
"type": "object"
}
},
"type": "object",
"default": {}
"type": "object"
},
"plmn_list": {
"title": "PLMN list",
"description": "List of PLMNs broadcasted by the eNodeB, at most 6 (default: 00101)",
"title": "PLMN list (4G)",
"description": "List of PLMNs broadcasted by the eNodeB, at most 6. (must be set if there are LTE cells)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"default": "00101",
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
......@@ -137,64 +64,84 @@
"type": "object"
}
},
"type": "object",
"default": {}
"type": "object"
},
"lte_handover_a3_offset": {
"title": "A3 offset for LTE handover",
"description": "RSRP gain offset between gNBs which will trigger handover",
"type": "number",
"default": 6
"gnb_id": {
"title": "gNB ID",
"description": "gNB ID. (must be set if there are NR cells)",
"type": "string"
},
"lte_handover_time_to_trigger": {
"title": "Time to Trigger for LTE handover",
"description": "Time to triger after which LTE handover will be triggered if A3 offset is reached",
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number",
"enum": [
0,
40,
64,
80,
100,
128,
160,
256,
320,
480,
512,
640,
1024,
1280,
2560,
5120
],
"default": 480
"default": 28
},
"ncell_list": {
"title": "Neighbour Cell Info",
"description": "Neighbour Cell Info",
"amf_list": {
"title": "AMF list",
"description": "List of AMF to which the gNodeB is connected. (must be set if there are NR cells)",
"patternProperties": {
".*": {
"properties": {
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the neighbour cell",
"amf_addr": {
"title": "AMF Address",
"description": "IP address (and optional port) of NGAP SCTP connection to the AMF. The default port is 38412.",
"type": "string"
}
},
"type": "object"
}
},
"type": "object"
},
"plmn_list_5g": {
"title": "PLMN list (5G)",
"description": "List of PLMNs broadcasted by the gNodeB, at most 12. (must be set if there are NR cells)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
},
"tac": {
"$ref": "cell/nr/input-schema.json#/$defs/tac"
},
"ranac": {
"title": "Optional integer (range 0 to 255)",
"description": "RAN Area Code",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID of the neighbour cell",
"reserved": {
"default": false,
"title": "Reserved",
"description": "True if the cell is reserved for operator use.",
"type": "boolean"
}
},
"type": "object"
}
},
"type": "object"
},
"nssai": {
"title": "AMF slices configuration",
"description": "AMF slices configuration.",
"patternProperties": {
".*": {
"properties": {
"sst": {
"default": 1,
"title": "Slice Service Type",
"description": "Integer (range 1 to 255).",
"type": "number"
},
"cell_id": {
"title": "Cell ID",
"description": "Concatenation of enb_id and cell_id of the neighbour cell",
"sd": {
"default": "0x000032",
"title": "Slice Differentiator",
"description": "Optional integer (range 0 to 0xFFFFFE)",
"type": "string"
},
"tac": {
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
}
},
"type": "object"
......@@ -208,12 +155,6 @@
"description": "Activates websocket for remote control and sets password",
"type": "string"
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
......@@ -226,12 +167,6 @@
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"disable_sdr": {
"default": false,
"title": "Disable SDR",
"description": "Disables radio",
"type": "boolean"
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
......@@ -239,14 +174,14 @@
"type": "boolean"
},
"enb_stats_fetch_period": {
"title": "eNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get eNB statistics",
"title": "eNB/gNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get eNB/gNB statistics",
"type": "number",
"default": 60
},
"enb_drb_stats_enabled": {
"title": "Enable eNB drb statistics",
"description": "Enable eNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"title": "Enable eNB/gNB drb statistics",
"description": "Enable eNB/gNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
......
software/ors-amarisoft/instance-enb-schema.json 0 → 100644
View file @ ed138c6e
{
"$schema": "http://json-schema.org/draft-04/schema",
"description": "Values returned by eNB/gNB instantiation (stub)",
"type": "object",
"properties": {}
}
software/ors-amarisoft/instance-enb.jinja2.cfg
View file @ ed138c6e
{#- enb_mode indicates with which mode enb is instantiated with - enb | gnb #}
{%- set enb_mode = slap_configuration['slap-software-type'] %}
{%- do assert(enb_mode in ('enb', 'gnb'), enb_mode) %}
# instance-enb implements eNB/gNB service.
{#- defaults for global eNB/gNB parameters.
TODO automatically load enb defaults from JSON schema #}
{%- set enb_defaults = {
'com_ws_port': 9001,
'com_addr': '127.0.1.2',
'use_ipv4': False,
'gnb_id_bits': 28,
'nssai': {'1': {'sst': 1}},
} %}
{%- set gtp_addr_lo = '127.0.1.1' %}
{%- for k,v in enb_defaults|dictsort %}
{%- do slapparameter_dict.setdefault(k, v) %}
{%- endfor %}
{#- defaults for eNB radio parameters.
NOTE they are installed temporary and will go away after switch to generic multiRU. #}
{%- do RF.setdefault('tx_gain', slapparameter_dict.get('tx_gain', 0)) %}
{%- do RF.setdefault('rx_gain', slapparameter_dict.get('rx_gain', 0)) %}
{%- do RF.setdefault('dl_earfcn', slapparameter_dict.get('dl_earfcn', 0)) %}
{%- do RF.setdefault('dl_nr_arfcn', slapparameter_dict.get('dl_nr_arfcn', 0)) %}
{%- do RF.setdefault('nr_band', slapparameter_dict.get('nr_band', 0)) %}
[buildout]
parts =
......@@ -29,10 +34,23 @@ eggs-directory = {{ eggs_directory }}
develop-eggs-directory = {{ develop_eggs_directory }}
offline = true
{%- set icell_kind='enb' %}
{%- import 'slaplte.jinja2' as slaplte with context %}
{%- import 'ru_libinstance.jinja2.cfg' as rulib with context %}
{%- set ipeer_dict = {} %}
{%- set ipeercell_dict = {} %}
{%- do slaplte.load_ipeer(ipeer_dict) %}
{%- do slaplte.load_ipeercell(ipeercell_dict) %}
{%- do slaplte.check_loaded_everything() %}
{{ rulib.buildout() }}
[myslap]
# NOTE we don't query slapos.cookbook:slapconfiguration the second time because
# slapparameter_dict is potentially modified with defaults.
parameter_dict = {{ dumps(slapparameter_dict) }}
configuration = {{ dumps(slap_configuration) }}
[monitor-httpd-conf-parameter]
httpd-include-file = {{ buildout_directory }}/etc/httpd-include-file.conf
......@@ -48,26 +66,6 @@ minimum = 8035
maximum = 8055
ip = ${monitor-instance-parameter:monitor-httpd-ipv6}
[slap-configuration]
recipe = slapos.cookbook:slapconfiguration.serialised
computer = {{ slap_connection['computer-id'] }}
partition = {{ slap_connection['partition-id'] }}
url = {{ slap_connection['server-url'] }}
key = {{ slap_connection['key-file'] }}
cert = {{ slap_connection['cert-file'] }}
configuration.com_ws_port = 9001
configuration.com_addr = 127.0.1.2
configuration.mme_addr = 127.0.1.100
configuration.amf_addr = 127.0.1.100
configuration.gtp_addr = 127.0.1.1
configuration.default_lte_bandwidth = {{ default_lte_bandwidth }}
configuration.default_lte_inactivity_timer = {{ default_lte_inactivity_timer }}
configuration.default_nr_bandwidth = {{ default_nr_bandwidth }}
configuration.default_nr_inactivity_timer = {{ default_nr_inactivity_timer }}
configuration.default_nr_ssb_pos_bitmap = {{ default_nr_ssb_pos_bitmap }}
configuration.default_n_antenna_dl = {{ default_n_antenna_dl }}
configuration.default_n_antenna_ul = {{ default_n_antenna_ul }}
[directory]
recipe = slapos.cookbook:mkdirectory
......@@ -134,7 +132,7 @@ drb_stats_logspec =
rotatespec = 100MB.9
logspec = ${:stats_logspec} ${:drb_stats_logspec}
{%- if slapparameter_dict.get("websocket_password", "") %}
websock = ws://[${slap-configuration:ipv6-random}]:9001
websock = ws://[{{my_ipv6}}]:9001
{%- else %}
websock = ws://127.0.1.2:9001
{%- endif %}
......@@ -194,44 +192,15 @@ extra-context =
context =
json ors false
section directory directory
section slap_configuration slap-configuration
key slapparameter_dict slap-configuration:configuration
key gtp_addr_v6 slap-configuration:ipv6-random
key slap_configuration myslap:configuration
key slapparameter_dict myslap:parameter_dict
raw gtp_addr_v6 {{ my_ipv6 }}
raw gtp_addr_v4 {{ lan_ipv4 }}
raw tx_gain {{ RF.tx_gain }}
raw rx_gain {{ RF.rx_gain }}
raw earfcn {{ RF.dl_earfcn }}
raw nr_arfcn {{ RF.dl_nr_arfcn }}
raw nr_band {{ RF.nr_band }}
raw software_name {{ software_name }}
raw rf_mode {{ rf_mode }}
raw trx {{ trx }}
raw bbu {{ bbu }}
raw ru_type {{ ru }}
{%- if enb_mode == 'enb' %}
json do_lte true
json do_nr false
{%- elif enb_mode == 'gnb' %}
json do_lte false
json do_nr true
{%- endif %}
raw gtp_addr_lo {{ gtp_addr_lo }}
import xbuildout xbuildout
import netaddr netaddr
${:extra-context}
[sib-config]
<= config-base
url = {{ sib23_template }}
output = ${directory:etc}/sib23.cfg
[drb-config]
<= config-base
{%- if enb_mode == 'enb' %}
url = {{ drb_lte_template }}
{%- elif enb_mode == 'gnb' %}
url = {{ drb_nr_template }}
{%- endif %}
output = ${directory:etc}/drb.cfg
[enb-config]
<= config-base
{% if slapparameter_dict.get("enb_config_link", None) %}
......@@ -240,32 +209,36 @@ url = ${enb-config-dl:target}
url = {{ enb_template }}
{% endif %}
output = ${directory:etc}/enb.cfg
extra-context =
import json_module json
json cell_list {{ rulib.cell_list | tojson }}
key sib23_file sib-config:output
key drb_file drb-config:output
import-list =
rawfile slaplte.jinja2 {{ slaplte_template }}
extra-context =
import json_module json
key iru_dict :iru_dict
key icell_dict :icell_dict
key ipeer_dict :ipeer_dict
key ipeercell_dict :ipeercell_dict
iru_dict = {{ dumps(rulib.iru_dict) }}
icell_dict = {{ dumps(rulib.icell_dict) }}
ipeer_dict = {{ dumps(ipeer_dict) }}
ipeercell_dict = {{ dumps(ipeercell_dict) }}
[publish-connection-information]
<= monitor-publish
recipe = slapos.cookbook:publish.serialised
{%- if slapparameter_dict.get("websocket_password", "") %}
websocket_url = ws://[${slap-configuration:ipv6-random}]:9001
websocket_url = ws://[{{my_ipv6}}]:9001
{%- endif %}
enb-ipv6 = ${slap-configuration:ipv6-random}
enb-ipv6 = {{ my_ipv6 }}
enb-ipv4 = {{ lan_ipv4 }}
{%- if enb_mode == 'enb' %}
current-earfcn = {{ RF.dl_earfcn }}
{%- elif enb_mode == 'gnb' %}
current-nr-arfcn = {{ RF.dl_nr_arfcn }}
current-nr-band = {{ RF.nr_band }}
{%- endif %}
amarisoft-version = {{ lte_version }}
license-expiration = {{ lte_expiration }}
monitor-gadget-url = ${:monitor-base-url}/gadget/software.cfg.html
ru-list = {{ dumps(rulib.iru_dict.keys() | sort) }}
cell-list = {{ dumps(rulib.icell_dict.keys() | sort) }}
peer-list = {{ dumps(ipeer_dict.keys() | sort) }}
peer-cell-list = {{ dumps(ipeercell_dict.keys() | sort) }}
[monitor-instance-parameter]
{% if slapparameter_dict.get("name", None) %}
......
software/ors-amarisoft/instance-fdd-gnb-input-schema.json deleted 100644 → 0
View file @ 7989e6ce
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"nr_bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "1, 2, 4 or 8. Number of DL antennas.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "1, 2, 4 or 8. Number of UL antennas.",
"type": "number",
"default": 2
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"ssb_pos_bitmap": {
"title": "SSB Position Bitmap",
"description": "SSB position bitmap in bits (4, 8 or 64 bits depending on the DL frequency).",
"type": "string",
"default": 10000000
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID",
"type": "number",
"default": 500
},
"cell_id": {
"title": "Cell ID",
"description": "Cell ID",
"type": "string",
"default": "0x01"
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"gnb_id": {
"title": "gNB ID",
"description": "gNB ID",
"type": "string",
"default": "0x12345"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number",
"default": 28
},
"amf_list": {
"title": "AMF list",
"description": "Optionnal. List of AMF to which the gNodeB is connected",
"patternProperties": {
".*": {
"properties": {
"amf_addr": {
"title": "AMF Address",
"description": "IP address (and optional port) of NGAP SCTP connection to the AMF. The default port is 38412.",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"plmn_list": {
"title": "PLMN list",
"description": "List of PLMNs broadcasted by the gNodeB, at most 12 (default: 00101)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"default": "00101",
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
},
"tac": {
"default": 100,
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
},
"ranac": {
"title": "Optional integer (range 0 to 255)",
"description": "RAN Area Code",
"type": "number"
},
"reserved": {
"default": false,
"title": "Reserved",
"description": "True if the cell is reserved for operator use.",
"type": "boolean"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nssai": {
"title": "AMF slices configuration",
"description": "AMF slices configuration.",
"patternProperties": {
".*": {
"properties": {
"sst": {
"default": 1,
"title": "Slice Service Type",
"description": "Integer (range 1 to 255).",
"type": "number"
},
"sd": {
"default": "0x000032",
"title": "Slice Differentiator",
"description": "Optional integer (range 0 to 0xFFFFFE)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nr_handover_a3_offset": {
"title": "A3 offset for NR handover",
"description": "RSRP gain offset between gNBs which will trigger handover",
"type": "number",
"default": 6
},
"nr_handover_time_to_trigger": {
"title": "Time to Trigger for NR handover",
"description": "Time to triger after which NR handover will be triggerd if A3 offset is reached",
"type": "number",
"enum": [
0,
40,
64,
80,
100,
128,
160,
256,
320,
480,
512,
640,
1024,
1280,
2560,
5120
],
"default": 100
},
"ncell_list": {
"title": "Neighbour Cell Info",
"description": "Neighbour Cell Info",
"patternProperties": {
".*": {
"properties": {
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID of the neighbour cell",
"type": "number"
},
"nr_cell_id": {
"title": "NR Cell ID",
"description": "Concatenation of gnb_id and cell_id of the neighbour cell",
"type": "string"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"tac": {
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"xn_peers": {
"title": "XN Peers",
"description": "XN Peers",
"patternProperties": {
".*": {
"properties": {
"xn_addr": {
"title": "XN Address",
"description": "XN Address of the neighbour cell (gNB Address)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"websocket_password": {
"title": "Websocket password",
"description": "Activates websocket for remote control and sets password",
"type": "string"
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
"type": "boolean",
"default": false
},
"gps_sync": {
"default": false,
"title": "GPS synchronisation",
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"disable_sdr": {
"default": false,
"title": "Disable SDR",
"description": "Disables radio",
"type": "boolean"
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
"description": "Set to true to use IPv4 for AMF / MME addresses",
"type": "boolean"
},
"gnb_stats_fetch_period": {
"title": "gNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get gNB statistics",
"type": "number",
"default": 60
},
"gnb_drb_stats_enabled": {
"title": "Enable gNB drb statistics",
"description": "Enable gNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
"max_rx_sample_db": {
"title": "Maximum RX sample value (dB)",
"description": "Maximum RX sample threshold above which RX saturated promise will fail",
"type": "number",
"default": 0
},
"min_rxtx_delay": {
"title": "Minimum available time for radio front end processing (ms)",
"description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
"type": "number",
"default": 0
},
"xlog_fluentbit_forward_host": {
"title": "Address to Forward Xlog by Fluenbit",
"description": "Address of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_port": {
"title": "Port to Forward Xlog by Fluentbit",
"description": "Optional Port of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_shared_key": {
"title": "Shared Key to Forward Xlog by Fluentbit",
"description": "Secret Key Shared with Remote Fluentd or Fluentbit Server for Authentication when Forwarding Xlog",
"type": "string"
}
}
}
software/ors-amarisoft/instance-fdd-lopcomm-gnb-input-schema.json deleted 100644 → 0
View file @ 7989e6ce
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"nr_bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "1, 2, 4 or 8. Number of DL antennas.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "1, 2, 4 or 8. Number of UL antennas.",
"type": "number",
"default": 2
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"ssb_pos_bitmap": {
"title": "SSB Position Bitmap",
"description": "SSB position bitmap in bits (4, 8 or 64 bits depending on the DL frequency).",
"type": "string",
"default": 10000000
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID",
"type": "number",
"default": 500
},
"cell_id": {
"title": "Cell ID",
"description": "Cell ID",
"type": "string",
"default": "0x01"
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"gnb_id": {
"title": "gNB ID",
"description": "gNB ID",
"type": "string",
"default": "0x12345"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number",
"default": 28
},
"amf_list": {
"title": "AMF list",
"description": "Optionnal. List of AMF to which the gNodeB is connected",
"patternProperties": {
".*": {
"properties": {
"amf_addr": {
"title": "AMF Address",
"description": "IP address (and optional port) of NGAP SCTP connection to the AMF. The default port is 38412.",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"plmn_list": {
"title": "PLMN list",
"description": "List of PLMNs broadcasted by the gNodeB, at most 12 (default: 00101)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"default": "00101",
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
},
"tac": {
"default": 100,
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
},
"ranac": {
"title": "Optional integer (range 0 to 255)",
"description": "RAN Area Code",
"type": "number"
},
"reserved": {
"default": false,
"title": "Reserved",
"description": "True if the cell is reserved for operator use.",
"type": "boolean"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nssai": {
"title": "AMF slices configuration",
"description": "AMF slices configuration.",
"patternProperties": {
".*": {
"properties": {
"sst": {
"default": 1,
"title": "Slice Service Type",
"description": "Integer (range 1 to 255).",
"type": "number"
},
"sd": {
"default": "0x000032",
"title": "Slice Differentiator",
"description": "Optional integer (range 0 to 0xFFFFFE)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nr_handover_a3_offset": {
"title": "A3 offset for NR handover",
"description": "RSRP gain offset between gNBs which will trigger handover",
"type": "number",
"default": 6
},
"nr_handover_time_to_trigger": {
"title": "Time to Trigger for NR handover",
"description": "Time to triger after which NR handover will be triggerd if A3 offset is reached",
"type": "number",
"enum": [
0,
40,
64,
80,
100,
128,
160,
256,
320,
480,
512,
640,
1024,
1280,
2560,
5120
],
"default": 100
},
"ncell_list": {
"title": "Neighbour Cell Info",
"description": "Neighbour Cell Info",
"patternProperties": {
".*": {
"properties": {
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID of the neighbour cell",
"type": "number"
},
"nr_cell_id": {
"title": "NR Cell ID",
"description": "Concatenation of gnb_id and cell_id of the neighbour cell",
"type": "string"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"tac": {
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"xn_peers": {
"title": "XN Peers",
"description": "XN Peers",
"patternProperties": {
".*": {
"properties": {
"xn_addr": {
"title": "XN Address",
"description": "XN Address of the neighbour cell (gNB Address)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"websocket_password": {
"title": "Websocket password",
"description": "Activates websocket for remote control and sets password",
"type": "string"
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
"type": "boolean",
"default": false
},
"gps_sync": {
"default": false,
"title": "GPS synchronisation",
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"disable_sdr": {
"default": false,
"title": "Disable SDR",
"description": "Disables radio",
"type": "boolean"
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
"description": "Set to true to use IPv4 for AMF / MME addresses",
"type": "boolean"
},
"gnb_stats_fetch_period": {
"title": "gNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get gNB statistics",
"type": "number",
"default": 60
},
"gnb_drb_stats_enabled": {
"title": "Enable gNB drb statistics",
"description": "Enable gNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
"max_rx_sample_db": {
"title": "Maximum RX sample value (dB)",
"description": "Maximum RX sample threshold above which RX saturated promise will fail",
"type": "number",
"default": 0
},
"min_rxtx_delay": {
"title": "Minimum available time for radio front end processing (ms)",
"description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
"type": "number",
"default": 0
},
"xlog_fluentbit_forward_host": {
"title": "Address to Forward Xlog by Fluenbit",
"description": "Address of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_port": {
"title": "Port to Forward Xlog by Fluentbit",
"description": "Optional Port of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_shared_key": {
"title": "Shared Key to Forward Xlog by Fluentbit",
"description": "Secret Key Shared with Remote Fluentd or Fluentbit Server for Authentication when Forwarding Xlog",
"type": "string"
}
}
}
software/ors-amarisoft/instance-fdd-lopcomm-ue-lte-input-schema.json deleted 100644 → 0
View file @ 7989e6ce
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth",
"type": "string",
"enum": [
"1.4 MHz",
"3 MHz",
"5 MHz",
"10 MHz",
"15 MHz",
"20 MHz"
],
"default": "20 MHz"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/instance-fdd-lopcomm-ue-nr-input-schema.json deleted 100644 → 0
View file @ 7989e6ce
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type": "number"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/instance-fdd-ors-gnb-input-schema.json deleted 100644 → 0
View file @ 7989e6ce
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"nr_bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "1 or 2. Number of DL antennas.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "1 or 2. Number of UL antennas.",
"type": "number",
"default": 2
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"ssb_pos_bitmap": {
"title": "SSB Position Bitmap",
"description": "SSB position bitmap in bits (4, 8 or 64 bits depending on the DL frequency).",
"type": "string",
"default": 10000000
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID",
"type": "number",
"default": 500
},
"cell_id": {
"title": "Cell ID",
"description": "Cell ID",
"type": "string",
"default": "0x01"
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"gnb_id": {
"title": "gNB ID",
"description": "gNB ID",
"type": "string",
"default": "0x12345"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number",
"default": 28
},
"amf_list": {
"title": "AMF list",
"description": "Optionnal. List of AMF to which the gNodeB is connected",
"patternProperties": {
".*": {
"properties": {
"amf_addr": {
"title": "AMF Address",
"description": "IP address (and optional port) of NGAP SCTP connection to the AMF. The default port is 38412.",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"plmn_list": {
"title": "PLMN list",
"description": "List of PLMNs broadcasted by the gNodeB, at most 12 (default: 00101)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"default": "00101",
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
},
"tac": {
"default": 100,
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
},
"ranac": {
"title": "Optional integer (range 0 to 255)",
"description": "RAN Area Code",
"type": "number"
},
"reserved": {
"default": false,
"title": "Reserved",
"description": "True if the cell is reserved for operator use.",
"type": "boolean"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nssai": {
"title": "AMF slices configuration",
"description": "AMF slices configuration.",
"patternProperties": {
".*": {
"properties": {
"sst": {
"default": 1,
"title": "Slice Service Type",
"description": "Integer (range 1 to 255).",
"type": "number"
},
"sd": {
"default": "0x000032",
"title": "Slice Differentiator",
"description": "Optional integer (range 0 to 0xFFFFFE)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nr_handover_a3_offset": {
"title": "A3 offset for NR handover",
"description": "RSRP gain offset between gNBs which will trigger handover",
"type": "number",
"default": 6
},
"nr_handover_time_to_trigger": {
"title": "Time to Trigger for NR handover",
"description": "Time to triger after which NR handover will be triggerd if A3 offset is reached",
"type": "number",
"enum": [
0,
40,
64,
80,
100,
128,
160,
256,
320,
480,
512,
640,
1024,
1280,
2560,
5120
],
"default": 100
},
"ncell_list": {
"title": "Neighbour Cell Info",
"description": "Neighbour Cell Info",
"patternProperties": {
".*": {
"properties": {
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID of the neighbour cell",
"type": "number"
},
"nr_cell_id": {
"title": "NR Cell ID",
"description": "Concatenation of gnb_id and cell_id of the neighbour cell",
"type": "string"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"tac": {
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"xn_peers": {
"title": "XN Peers",
"description": "XN Peers",
"patternProperties": {
".*": {
"properties": {
"xn_addr": {
"title": "XN Address",
"description": "XN Address of the neighbour cell (gNB Address)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"websocket_password": {
"title": "Websocket password",
"description": "Activates websocket for remote control and sets password",
"type": "string"
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
"type": "boolean",
"default": false
},
"gps_sync": {
"default": false,
"title": "GPS synchronisation",
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"disable_sdr": {
"default": false,
"title": "Disable SDR",
"description": "Disables radio",
"type": "boolean"
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
"description": "Set to true to use IPv4 for AMF / MME addresses",
"type": "boolean"
},
"gnb_stats_fetch_period": {
"title": "gNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get gNB statistics",
"type": "number",
"default": 60
},
"gnb_drb_stats_enabled": {
"title": "Enable gNB drb statistics",
"description": "Enable gNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
"max_rx_sample_db": {
"title": "Maximum RX sample value (dB)",
"description": "Maximum RX sample threshold above which RX saturated promise will fail",
"type": "number",
"default": 0
},
"min_rxtx_delay": {
"title": "Minimum available time for radio front end processing (ms)",
"description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
"type": "number",
"default": 0
},
"xlog_fluentbit_forward_host": {
"title": "Address to Forward Xlog by Fluenbit",
"description": "Address of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_port": {
"title": "Port to Forward Xlog by Fluentbit",
"description": "Optional Port of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_shared_key": {
"title": "Shared Key to Forward Xlog by Fluentbit",
"description": "Secret Key Shared with Remote Fluentd or Fluentbit Server for Authentication when Forwarding Xlog",
"type": "string"
}
}
}
software/ors-amarisoft/instance-fdd-ors-ue-lte-input-schema.json deleted 100644 → 0
View file @ 7989e6ce
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth",
"type": "string",
"enum": [
"1.4 MHz",
"3 MHz",
"5 MHz",
"10 MHz",
"15 MHz",
"20 MHz"
],
"default": "20 MHz"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/instance-fdd-ors-ue-nr-input-schema.json deleted 100644 → 0
View file @ 7989e6ce
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type": "number"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/instance-fdd-ue-lte-input-schema.json deleted 100644 → 0
View file @ 7989e6ce
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth",
"type": "string",
"enum": [
"1.4 MHz",
"3 MHz",
"5 MHz",
"10 MHz",
"15 MHz",
"20 MHz"
],
"default": "20 MHz"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/instance-fdd-ue-nr-input-schema.json deleted 100644 → 0
View file @ 7989e6ce
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type": "number"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/instance-ors-enb-schema.json 0 → 100644
View file @ ed138c6e
{
"$schema": "http://json-schema.org/draft-04/schema",
"description": "Values returned by ORS eNB instantiation (stub)",
"type": "object",
"properties": {}
}
software/ors-amarisoft/instance-ors-enb.jinja2.cfg
View file @ ed138c6e
# instance-ors-enb translates ORS enb/gnb into base enb/gnb.
# instance-ors-enb translates ORS enb/gnb into generic enb with 1 SDR RU and 1 CELL.
{#- enb_mode indicates with which mode ors' enb is instantiated with - enb | gnb #}
{%- set enb_mode = slap_configuration['slap-software-type'] %}
{%- do assert(enb_mode in ('enb', 'gnb'), enb_mode) %}
{#- defaults for ORS parameters.
TODO automatically load ORS/enb and ORS/gnb defaults from JSON schema #}
{%- set ors_enb_defaults = {
"bandwidth": "20 MHz",
"n_antenna_dl": 2,
"n_antenna_ul": 2,
"rf_mode": "tdd",
"tdd_ul_dl_config": "[Configuration 2] 5ms 2UL 6DL (default)",
"pci": 1,
"cell_id": "0x01",
"tac": "0x0001",
"root_sequence_index": 204,
"enb_id": "0x1A2D0",
"mme_list": {'1': {'mme_addr': '127.0.1.100'}},
"plmn_list": {"1": {'plmn': '00101'}},
"ncell_list": {},
"x2_peers": {},
"inactivity_timer": 10000,
"disable_sdr": false
} %}
{%- set ors_gnb_defaults = {
"nr_bandwidth": 40,
"n_antenna_dl": 2,
"n_antenna_ul": 2,
"rf_mode": "tdd",
"tdd_ul_dl_config": "5ms 2UL 7DL 4/6 (default)",
"ssb_pos_bitmap": "10000000",
"pci": 500,
"cell_id": "0x01",
"gnb_id": "0x12345",
"gnb_id_bits": 28,
"amf_list": {'1': {'amf_addr': '127.0.1.100'}},
"plmn_list": {'1': {'plmn': '00101', 'tac': 100}},
"ncell_list": {},
"xn_peers": {},
"inactivity_timer": 10000,
"disable_sdr": false
} %}
{#- inject ORS defaults #}
{%- do RF.setdefault('tx_gain', ors_version['current-tx-gain']) %}
{%- do RF.setdefault('rx_gain', ors_version['current-rx-gain']) %}
{%- do RF.setdefault('earfcn', ors_version['current-earfcn']) %}
{%- do RF.setdefault('nr_arfcn', ors_version['current-nr-arfcn']) %}
{%- do RF.setdefault('nr_band', ors_version['current-nr-band']) %}
{%- set ors_defaults = {'enb': ors_enb_defaults, 'gnb': ors_gnb_defaults} [enb_mode] %}
{%- for k,v in ors_defaults|dictsort %}
{%- do slapparameter_dict.setdefault(k, v) %}
{%- endfor %}
{#- make real ru/cell/peer/... shared instances to be rejected in ORS mode #}
{%- set ishared_list = slap_configuration.setdefault('slave-instance-list', []) %}
{%- for ishared in ishared_list %}
{%- set _ = json_module.loads(ishared['_']) %}
{%- if 'ru_type' in _ or 'cell_type' in _ %}
{%- do ishared.update({'_': {'REJECT': 1}|tojson}) %}
{%- endif %}
{%- endfor %}
{#- inject ru+cell synthesized from ORS-specific parameters #}
{%- macro iref(name) %}
{{- '%s.%s' % (slap_configuration['instance-title'], name) -}}
{%- endmacro %}
{%- do ishared_list.append({
'slave_title': iref('RU'),
'slave_reference': False,
'_': {
'ru_type': 'sdr',
'ru_link_type': 'sdr',
'sdr_dev_list': [0],
'n_antenna_dl': slapparameter_dict.n_antenna_dl,
'n_antenna_ul': slapparameter_dict.n_antenna_ul,
'tx_gain': ors_version['current-tx-gain'],
'rx_gain': ors_version['current-rx-gain'],
'txrx_active': 'ACTIVE' if (not slapparameter_dict.disable_sdr) else 'INACTIVE',
} |tojson
})
%}
{%- if enb_mode == 'enb' %}
{%- set cell = {
'cell_type': 'lte',
'dl_earfcn': ors_version['current-earfcn'],
'bandwidth': float(slapparameter_dict.bandwidth.removesuffix(' MHz')),
'tac': slapparameter_dict.tac,
'root_sequence_index': slapparameter_dict.root_sequence_index,
}
%}
{%- elif enb_mode == 'gnb' %}
{%- set cell = {
'cell_type': 'nr',
'dl_nr_arfcn': ors_version['current-nr-arfcn'],
'nr_band': ors_version['current-nr-band'],
'bandwidth': slapparameter_dict.nr_bandwidth,
'ssb_pos_bitmap': slapparameter_dict.ssb_pos_bitmap,
'root_sequence_index': 1,
}
%}
{%- endif %}
{%- do cell.update({
'cell_kind': 'enb',
'rf_mode': slapparameter_dict.rf_mode,
'pci': slapparameter_dict.pci,
'cell_id': slapparameter_dict.cell_id,
'tdd_ul_dl_config': slapparameter_dict.tdd_ul_dl_config,
'inactivity_timer': slapparameter_dict.inactivity_timer,
'ru': { 'ru_type': 'ru_ref',
'ru_ref': iref('RU') }
})
%}
{%- do ishared_list.append({
'slave_title': iref('CELL'),
'slave_reference': False,
'_': cell | tojson
})
%}
{#- inject synthesized peer cells #}
{%- for k, ncell in slapparameter_dict.ncell_list|dictsort %}
{%- set peercell = {'cell_kind': 'enb_peer'} %}
{%- macro _(name, default) %}
{%- if default is defined %}
{%- do peercell.update({name: default}) %}
{%- endif %}
{%- if name in ncell %}
{%- do peercell.update({name: ncell[name]}) %}
{%- endif %}
{%- endmacro %}
{%- if enb_mode == 'enb' %}
{%- do peercell.update({'cell_type': 'lte'}) %}
{%- if 'cell_id' in ncell %}
{%- do peercell.update({'e_cell_id': ncell.cell_id}) %}
{%- endif %}
{%- do _('pci') %}
{%- do _('dl_earfcn') %}
{%- do _('tac', '0x0001') %}
{%- elif enb_mode == 'gnb' %}
{%- do peercell.update({'cell_type': 'nr'}) %}
{%- do _('nr_cell_id') %}
{%- do _('gnb_id_bits') %}
{%- do _('pci') %}
{%- do _('dl_nr_arfcn') %}
{%- do _('ssb_nr_arfcn') %}
{%- do _('tac', 1) %}
{%- do _('nr_band') %}
{%- endif %}
{%- do ishared_list.append({
'slave_title': '%s%s' % (iref('PEERCELL'), k),
'slave_reference': False,
'_': peercell | tojson
})
%}
{%- endfor %}
{#- inject synthesized peers #}
{%- if enb_mode == 'lte' %}
{%- for k, peer in slapparameter_dict.x2_peers|dictsort %}
{%- do ishared_list.append({
'slave_title': '%s%s' % (iref('X2_PEER'), k),
'slave_reference': False,
'_': {
'peer_type': 'nr',
'x2_addr': peer.x2_addr,
} | tojson
})
%}
{%- endfor %}
{%- elif enb_mode == 'nr' %}
{%- for k, peer in slapparameter_dict.xn_peers|dictsort %}
{%- do ishared_list.append({
'slave_title': '%s%s' % (iref('XN_PEER'), k),
'slave_reference': False,
'_': {
'peer_type': 'nr',
'xn_addr': peer.xn_addr
} | tojson
})
%}
{%- endfor %}
{%- endif %}
{#- gnb: plmn_list -> plmn_list_5g #}
{%- if enb_mode == 'gnb' %}
{%- set _ = slapparameter_dict %}
{%- do _.update({'plmn_list_5g': _.plmn_list}) %}
{%- do _.pop('plmn_list') %}
{%- endif %}
{#- backward compatibility: if ORS is running in gnb mode, and gnb_* parameters
......@@ -32,7 +214,7 @@
{%- endif %}
# code of base enb
# code of generic enb
{% include 'instance-enb-base.jinja2.cfg' %}
......@@ -59,3 +241,16 @@ current-earfcn = {{ ors_version['current-earfcn'] }}
current-nr-arfcn = {{ ors_version['current-nr-arfcn'] }}
current-nr-band = {{ ors_version['current-nr-band'] }}
{%- endif %}
# hide ru-list, cell-list, peer-list and peer-cell-list from published information
[publish-connection-information]
depends += ${publish-connection-information-ors-cleanup:recipe}
[publish-connection-information-ors-cleanup]
recipe = slapos.recipe.build
init =
publish = self.buildout['publish-connection-information']
del publish['ru-list']
del publish['cell-list']
del publish['peer-list']
del publish['peer-cell-list']
software/ors-amarisoft/instance-ors-gnb-input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/instance-ors-gnb-schema.json 0 → 100644
View file @ ed138c6e
{
"$schema": "http://json-schema.org/draft-04/schema",
"description": "Values returned by ORS gNB instantiation (stub)",
"type": "object",
"properties": {}
}
software/ors-amarisoft/instance-ors.cfg
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/instance-ue-input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/instance-ue-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/instance.cfg
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/peer/cell/common.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/peer/cell/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/peer/cell/lte/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/peer/cell/nr/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/peer/cell/schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/peer/common.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/peer/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/peer/lte/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/peer/nr/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/peer/schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/render-templates deleted 100755 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/ru/buildout.cfg
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ru/common.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ru/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ru/lopcomm/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ru/schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ru/sdr/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ru/sunwave/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ru/xbuildout.py 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/sim/schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/slaplte.jinja2
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/software-fdd-lopcomm.cfg deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/software-fdd-lopcomm.cfg.json deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/software-fdd-ors.cfg deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/software-fdd-ors.cfg.json deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/software-fdd.cfg deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/software-fdd.cfg.json deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/software-ors.cfg
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/software-tdd-m2ru.cfg deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/software-tdd-m2ru.cfg.json deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/software-tdd-ors.cfg
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/software-tdd.cfg deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/software-tdd.cfg.json deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/software.cfg.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/software.cfg.json.jinja2 deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/software.jinja2.cfg deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/test/setup.py
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/test/test.jinja2.py deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/test/test.py
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/test/testFDD-LOPCOMM.py deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/test/testFDD-ORS.py deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/test/testFDD.py deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/test/testTDD-M2RU.py deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/test/testTDD-ORS.py deleted 100644 → 0
View file @ 7989e6ce
This diff is collapsed.
software/ors-amarisoft/ue/cell/common.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ue/cell/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ue/cell/lte/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ue/cell/nr/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ue/cell/schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ue/common.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ue/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ue/lte/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ue/nr/input-schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/ors-amarisoft/ue/schema.json 0 → 100644
View file @ ed138c6e
This diff is collapsed.
software/slapos-sr-testing/software.cfg
View file @ ed138c6e
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7