lcd_qvga.c 4.9 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165
/*
 * Support for SuperH MigoR Quarter VGA LCD Panel
 *
 * Copyright (C) 2008 Magnus Damm
 *
 * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
 * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/delay.h>
#include <linux/err.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/sh_mobile_lcdc.h>
#include <asm/migor.h>

/* LCD Module is a PH240320T according to board schematics. This module
 * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
 * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
 * SYS-80 interface configured in 16 bit mode.
 *
 * Index 0: "Device Code Read" returns 0x1505.
 */

static void reset_lcd_module(void)
{
	ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR);
	mdelay(2);
	ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR);
	mdelay(1);
}

/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */

static unsigned long adjust_reg18(unsigned short data)
{
	unsigned long tmp1, tmp2;

	tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
	tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
	return tmp1 | tmp2;
}

static void write_reg(void *sys_ops_handle,
		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
		       unsigned short reg, unsigned short data)
{
	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
}

static void write_reg16(void *sys_ops_handle,
			struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
			unsigned short reg, unsigned short data)
{
	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
	sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
}

static unsigned long read_reg16(void *sys_ops_handle,
				struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
				unsigned short reg)
{
	unsigned long data;

	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
	data = sys_ops->read_data(sys_ops_handle);
	return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
}

static void migor_lcd_qvga_seq(void *sys_ops_handle,
			       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
			       unsigned short const *data, int no_data)
{
	int i;

	for (i = 0; i < no_data; i += 2)
		write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
}

static const unsigned short sync_data[] = {
	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
};

static const unsigned short magic0_data[] = {
	0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
	0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
	0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
};

static const unsigned short magic1_data[] = {
	0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
	0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
	0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
	0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
	0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
	0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
	0x0015, 0x8000,
};

static const unsigned short magic2_data[] = {
	0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
};

static const unsigned short magic3_data[] = {
	0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
};

int migor_lcd_qvga_setup(void *board_data, void *sohandle,
			 struct sh_mobile_lcdc_sys_bus_ops *so)
{
	unsigned long xres = 320;
	unsigned long yres = 240;
	int k;

	reset_lcd_module();
	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));

	if (read_reg16(sohandle, so, 0) != 0x1505)
		return -ENODEV;

	pr_info("Migo-R QVGA LCD Module detected.\n");

	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
	write_reg16(sohandle, so, 0x00A4, 0x0001);
	mdelay(10);

	migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
	mdelay(100);

	migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
	write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
	write_reg16(sohandle, so, 0x0051, 0x00ef);
	write_reg16(sohandle, so, 0x0052, 0x0000);
	write_reg16(sohandle, so, 0x0053, xres - 1);

	migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
	mdelay(10);

	migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
	mdelay(40);

	/* clear GRAM to avoid displaying garbage */

	write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
	write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */

	for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
		write_reg16(sohandle, so, 0x0022, 0x0000);

	write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
	write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
	write_reg16(sohandle, so, 0x0007, 0x0173);
	mdelay(40);

	/* enable display */
	write_reg(sohandle, so, 0x00, 0x22);
	mdelay(100);
	return 0;
}