serial.h 8.6 KB
Newer Older
Linus Torvalds's avatar
Linus Torvalds committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126
/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1999 by Ralf Baechle
 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
 */
#ifndef _ASM_SERIAL_H
#define _ASM_SERIAL_H

#include <linux/config.h>

/*
 * This assumes you have a 1.8432 MHz clock for your UART.
 *
 * It'd be nice if someone built a serial card with a 24.576 MHz
 * clock, since the 16550A is capable of handling a top speed of 1.5
 * megabits/second; but this requires the faster clock.
 */
#define BASE_BAUD (1843200 / 16)

/* Standard COM flags (except for COM4, because of the 8514 problem) */
#ifdef CONFIG_SERIAL_DETECT_IRQ
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
#else
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
#endif

#ifdef CONFIG_MACH_JAZZ
#include <asm/jazz.h>

#ifndef CONFIG_OLIVETTI_M700
   /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
      exactly which ones ... XXX */
#define JAZZ_BASE_BAUD ( 8000000 / 16 ) /* ( 3072000 / 16) */
#else
/* but the M700 isn't such a strange beast */
#define JAZZ_BASE_BAUD BASE_BAUD
#endif

#define _JAZZ_SERIAL_INIT(int, base)					\
	{ .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,	\
	  .iomem_base = (u8 *) base, .iomem_reg_shift = 0,			\
	  .io_type = SERIAL_IO_MEM }
#define JAZZ_SERIAL_PORT_DEFNS						\
	_JAZZ_SERIAL_INIT(JAZZ_SERIAL1_IRQ, JAZZ_SERIAL1_BASE),		\
	_JAZZ_SERIAL_INIT(JAZZ_SERIAL2_IRQ, JAZZ_SERIAL2_BASE),
#else
#define JAZZ_SERIAL_PORT_DEFNS
#endif

/*
 * Both Galileo boards have the same UART mappings.
 */
#if defined (CONFIG_MIPS_EV96100) || defined (CONFIG_MIPS_EV64120)
#include <asm/galileo-boards/ev96100.h>
#include <asm/galileo-boards/ev96100int.h>
#define EV96100_SERIAL_PORT_DEFNS                                  \
    { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \
      .flags = STD_COM_FLAGS,  \
      .iomem_base = EV96100_UART0_REGS_BASE, .iomem_reg_shift = 2, \
      .io_type = SERIAL_IO_MEM }, \
    { .baud_base = EV96100_BASE_BAUD, .irq = EV96100INT_UART_0, \
      .flags = STD_COM_FLAGS, \
      .iomem_base = EV96100_UART1_REGS_BASE, .iomem_reg_shift = 2, \
      .io_type = SERIAL_IO_MEM },
#else
#define EV96100_SERIAL_PORT_DEFNS
#endif

#ifdef CONFIG_MIPS_ITE8172
#include <asm/it8172/it8172.h>
#include <asm/it8172/it8172_int.h>
#include <asm/it8712.h>
#define ITE_SERIAL_PORT_DEFNS                                  \
    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
    { .baud_base = (24000000/(16*13)), .port = (IT8172_PCI_IO_BASE + IT8712_UART1_PORT), \
      .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .type = 0x3 }, \
    /* Smart Card Reader 0 */ \
    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR0_BASE), \
      .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
    /* Smart Card Reader 1 */ \
    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },
#else
#define ITE_SERIAL_PORT_DEFNS
#endif

#ifdef CONFIG_MIPS_IVR
#include <asm/it8172/it8172.h>
#include <asm/it8172/it8172_int.h>
#define IVR_SERIAL_PORT_DEFNS                                  \
    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },         \
    /* Smart Card Reader 1 */ \
    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },
#else
#define IVR_SERIAL_PORT_DEFNS
#endif

#ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
#define STD_SERIAL_PORT_DEFNS			\
	/* UART CLK   PORT IRQ     FLAGS        */			\
	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */

#else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
#define STD_SERIAL_PORT_DEFNS
#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */

#ifdef CONFIG_MOMENCO_JAGUAR_ATX
/* Ordinary NS16552 duart with a 20MHz crystal.  */
#define JAGUAR_ATX_UART_CLK	20000000
#define JAGUAR_ATX_BASE_BAUD	(JAGUAR_ATX_UART_CLK / 16)

#define JAGUAR_ATX_SERIAL1_IRQ	6
#define JAGUAR_ATX_SERIAL1_BASE	0xfd000023L

#define _JAGUAR_ATX_SERIAL_INIT(int, base)				\
Ralf Baechle's avatar
Ralf Baechle committed
127 128 129
	{ .baud_base = JAGUAR_ATX_BASE_BAUD, irq: int,			\
	  .flags = (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),		\
	  .iomem_base = (u8 *) base, iomem_reg_shift: 2,			\
Linus Torvalds's avatar
Linus Torvalds committed
130 131 132 133 134 135 136 137 138 139 140 141 142
	  io_type: SERIAL_IO_MEM }
#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS				\
	_JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE)
#else
#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS
#endif

#ifdef CONFIG_MOMENCO_OCELOT_3
#define OCELOT_3_BASE_BAUD	( 20000000 / 16 )
#define OCELOT_3_SERIAL_IRQ	6
#define OCELOT_3_SERIAL_BASE	(signed)0xfd000020

#define _OCELOT_3_SERIAL_INIT(int, base)				\
Ralf Baechle's avatar
Ralf Baechle committed
143 144 145
	{ .baud_base = OCELOT_3_BASE_BAUD, irq: int, 			\
	  .flags = STD_COM_FLAGS,						\
	  .iomem_base = (u8 *) base, iomem_reg_shift: 2,			\
Linus Torvalds's avatar
Linus Torvalds committed
146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251
	  io_type: SERIAL_IO_MEM }

#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS				\
	_OCELOT_3_SERIAL_INIT(OCELOT_3_SERIAL_IRQ, OCELOT_3_SERIAL_BASE)
#else
#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS
#endif

#ifdef CONFIG_MOMENCO_OCELOT
/* Ordinary NS16552 duart with a 20MHz crystal.  */
#define OCELOT_BASE_BAUD ( 20000000 / 16 )

#define OCELOT_SERIAL1_IRQ	4
#define OCELOT_SERIAL1_BASE	0xe0001020

#define _OCELOT_SERIAL_INIT(int, base)					\
	{ .baud_base = OCELOT_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,	\
	  .iomem_base = (u8 *) base, .iomem_reg_shift = 2,			\
	  .io_type = SERIAL_IO_MEM }
#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS				\
	_OCELOT_SERIAL_INIT(OCELOT_SERIAL1_IRQ, OCELOT_SERIAL1_BASE)
#else
#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS
#endif

#ifdef CONFIG_MOMENCO_OCELOT_G
/* Ordinary NS16552 duart with a 20MHz crystal.  */
#define OCELOT_G_BASE_BAUD ( 20000000 / 16 )

#define OCELOT_G_SERIAL1_IRQ	4
#if 0
#define OCELOT_G_SERIAL1_BASE	0xe0001020
#else
#define OCELOT_G_SERIAL1_BASE	0xfd000020
#endif

#define _OCELOT_G_SERIAL_INIT(int, base)				\
	{ .baud_base = OCELOT_G_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,\
	  .iomem_base = (u8 *) base, .iomem_reg_shift = 2,			\
	  .io_type = SERIAL_IO_MEM }
#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS				\
	_OCELOT_G_SERIAL_INIT(OCELOT_G_SERIAL1_IRQ, OCELOT_G_SERIAL1_BASE)
#else
#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS
#endif

#ifdef CONFIG_MOMENCO_OCELOT_C
/* Ordinary NS16552 duart with a 20MHz crystal.  */
#define OCELOT_C_BASE_BAUD ( 20000000 / 16 )

#define OCELOT_C_SERIAL1_IRQ	80
#define OCELOT_C_SERIAL1_BASE	0xfd000020

#define OCELOT_C_SERIAL2_IRQ	81
#define OCELOT_C_SERIAL2_BASE	0xfd000000

#define _OCELOT_C_SERIAL_INIT(int, base)				\
	{ .baud_base		= OCELOT_C_BASE_BAUD,			\
	  .irq			= (int),				\
	  .flags		= STD_COM_FLAGS,			\
	  .iomem_base		= (u8 *) base,				\
	  .iomem_reg_shift	= 2,					\
	  .io_type		= SERIAL_IO_MEM				\
	 }
#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS				\
	_OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL1_IRQ, OCELOT_C_SERIAL1_BASE), \
	_OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL2_IRQ, OCELOT_C_SERIAL2_BASE)
#else
#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS
#endif

#ifdef CONFIG_DDB5477
#include <asm/ddb5xxx/ddb5477.h>
#define DDB5477_SERIAL_PORT_DEFNS                                       \
        { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART0, 		\
	  .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04200, 	\
	  .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM},		\
        { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART1, 		\
	  .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04240, 	\
	  .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM},
#else
#define DDB5477_SERIAL_PORT_DEFNS
#endif

#ifdef CONFIG_SGI_IP32
/*
 * The IP32 (SGI O2) has standard serial ports (UART 16550A) mapped in memory
 * They are initialized in ip32_setup
 */
#define IP32_SERIAL_PORT_DEFNS				\
        {},{},
#else
#define IP32_SERIAL_PORT_DEFNS
#endif /* CONFIG_SGI_IP32 */

#define SERIAL_PORT_DFNS				\
	DDB5477_SERIAL_PORT_DEFNS			\
	EV96100_SERIAL_PORT_DEFNS			\
	IP32_SERIAL_PORT_DEFNS                          \
	ITE_SERIAL_PORT_DEFNS           		\
	IVR_SERIAL_PORT_DEFNS           		\
	JAZZ_SERIAL_PORT_DEFNS				\
	STD_SERIAL_PORT_DEFNS				\
	MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS		\
	MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS		\
	MOMENCO_OCELOT_SERIAL_PORT_DEFNS		\
252
	MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS
Linus Torvalds's avatar
Linus Torvalds committed
253 254

#endif /* _ASM_SERIAL_H */