The MCDE DSI link hardware which is modeled like a bridge
in DRM, connected further to the panel bridge, creating
a pipeline.

We have been using the .pre_enable(), .enable(),
.disable() and .post_disable() callbacks from the bridge
to set this up in a chained manner: first the display
controller goes online and then in successive order
each bridge in the pipeline. Inside DRM it works
like this:

drm_atomic_helper_commit_tail()
  drm_atomic_helper_commit_modeset_enables()
    struct drm_crtc_helper_funcs .atomic_enable()
      struct drm_simple_display_pipe_funcs .enable()
        MCDE display enable call
    drm_atomic_bridge_chain_enable()
      struct drm_bridge_funcs .pre_enable()
        mcde_dsi_bridge_pre_enable()
        panel_bridge_pre_enable()
          struct drm_panel_funcs .prepare()
      struct drm_bridge_funcs .enable()
        mcde_dsi_bridge_enable()
        panel_bridge_enable()
          struct drm_panel_funcs .enable()

A similar sequence is executed for disabling.

Unfortunately this is not what the hardware needs: at
a certain stage in the enablement of the display
controller the DSI link needs to come up to support
video mode, else something (like a FIFO flow) locks
up the hardware and we never get picture.

Fix this by simply leaving the pre|enable and
post|disable callbacks unused, and establish two
cross-calls from the display controller to bring up
the DSI link at the right place in the display
bring-up sequence and vice versa in the shutdown
sequence.

For command mode displays, it works just fine to
also enable the display flow early. The only time
we hold it back right now is in one-shot mode,
on-demand display updates.

When combined with the previous patch and some patches
for the S6E63M0 display controller to support DSI
mode, this gives working display on the Samsung
GT-I8190 (Golden) phone. It has also been tested working
on the Samsung GT-S7710 (Skomer) phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-4-linus.walleij@linaro.org