KVM stores the gfn in MMIO SPTEs as a caching optimization.  These are split
in two parts, as in "[high 11111 low]", to thwart any attempt to use these bits
in an L1TF attack.  This works as long as there are 5 free bits between
MAXPHYADDR and bit 50 (inclusive), leaving bit 51 free so that the MMIO
access triggers a reserved-bit-set page fault.

The bit positions however were computed wrongly for AMD processors that have
encryption support.  In this case, x86_phys_bits is reduced (for example
from 48 to 43, to account for the C bit at position 47 and four bits used
internally to store the SEV ASID and other stuff) while x86_cache_bits in
would remain set to 48, and _all_ bits between the reduced MAXPHYADDR
and bit 51 are set.  Then low_phys_bits would also cover some of the
bits that are set in the shadow_mmio_value, terribly confusing the gfn
caching mechanism.

To fix this, avoid splitting gfns as long as the processor does not have
the L1TF bug (which includes all AMD processors).  When there is no
splitting, low_phys_bits can be set to the reduced MAXPHYADDR removing
the overlap.  This fixes "npt=0" operation on EPYC processors.

Thanks to Maxim Levitsky for bisecting this bug.

Cc: stable@vger.kernel.org
Fixes: 52918ed5 ("KVM: SVM: Override default MMIO mask if memory encryption is enabled")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>