• Stefan Roese's avatar
    serial: mctrl_gpio: Check if GPIO property exisits before requesting it · d9948267
    Stefan Roese authored
    This patch adds a check for the GPIOs property existence, before the
    GPIO is requested. This fixes an issue seen when the 8250 mctrl_gpio
    support is added (2nd patch in this patch series) on x86 platforms using
    ACPI.
    
    Here Mika's comments from 2016-08-09:
    
    "
    I noticed that with v4.8-rc1 serial console of some of our Broxton
    systems does not work properly anymore. I'm able to see output but input
    does not work.
    
    I bisected it down to commit 4ef03d32
    ("tty/serial/8250: use mctrl_gpio helpers").
    
    The reason why it fails is that in ACPI we do not have names for GPIOs
    (except when _DSD is used) so we use the "idx" to index into _CRS GPIO
    resources. Now mctrl_gpio_init_noauto() goes through a list of GPIOs
    calling devm_gpiod_get_index_optional() passing "idx" of 0 for each. The
    UART device in Broxton has following (simplified) ACPI description:
    
        Device (URT4)
        {
            ...
            Name (_CRS, ResourceTemplate () {
                GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
                        "\\_SB.GPO0", 0x00, ResourceConsumer)
                {
                    0x003A
                }
                GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
                        "\\_SB.GPO0", 0x00, ResourceConsumer)
                {
                    0x003D
                }
            })
    
    In this case it finds the first GPIO (0x003A which happens to be RX pin
    for that UART), turns it into GPIO which then breaks input for the UART
    device. This also breaks systems with bluetooth connected to UART (those
    typically have some GPIOs in their _CRS).
    
    Any ideas how to fix this?
    
    We cannot just drop the _CRS index lookup fallback because that would
    break many existing machines out there so maybe we can limit this to
    only DT enabled machines. Or alternatively probe if the property first
    exists before trying to acquire the GPIOs (using
    device_property_present()).
    "
    
    This patch implements the fix suggested by Mika in his statement above.
    Signed-off-by: default avatarStefan Roese <sr@denx.de>
    Reviewed-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
    Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
    Tested-by: default avatarYegor Yefremov <yegorslists@googlemail.com>
    Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
    Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    Cc: Yegor Yefremov <yegorslists@googlemail.com>
    Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Cc: Giulio Benetti <giulio.benetti@micronovasrl.com>
    Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
    d9948267
serial_mctrl_gpio.c 6.45 KB