• Gabor Juhos's avatar
    pata-rb532-cf: get rid of the irq_to_gpio() call · 01836176
    Gabor Juhos authored
    The RB532 platform specific irq_to_gpio() implementation has been
    removed with commit 832f5dac ("MIPS: Remove all the uses of
    custom gpio.h"). Now the platform uses the generic stub which causes
    the following error:
    
      pata-rb532-cf pata-rb532-cf: no GPIO found for irq149
      pata-rb532-cf: probe of pata-rb532-cf failed with error -2
    
    Drop the irq_to_gpio() call and get the GPIO number from platform
    data instead. After this change, the driver works again:
    
      scsi host0: pata-rb532-cf
      ata1: PATA max PIO4 irq 149
      ata1.00: CFA: CF 1GB, 20080820, max MWDMA4
      ata1.00: 1989792 sectors, multi 0: LBA
      ata1.00: configured for PIO4
      scsi 0:0:0:0: Direct-Access     ATA      CF 1GB           0820 PQ: 0\
      ANSI: 5
      sd 0:0:0:0: [sda] 1989792 512-byte logical blocks: (1.01 GB/971 MiB)
      sd 0:0:0:0: [sda] Write Protect is off
      sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't\
      support DPO or FUA
       sda: sda1 sda2
      sd 0:0:0:0: [sda] Attached SCSI disk
    
    Fixes: 832f5dac ("MIPS: Remove all the uses of custom gpio.h")
    Cc: Alban Bedel <albeu@free.fr>
    Cc: Ralf Baechle <ralf@linux-mips.org>
    Cc: Arnd Bergmann <arnd@arndb.de>
    Cc: <stable@vger.kernel.org> #v4.3+
    Signed-off-by: default avatarGabor Juhos <juhosg@openwrt.org>
    Signed-off-by: default avatarTejun Heo <tj@kernel.org>
    01836176
pata_rb532_cf.c 5.17 KB