hwmon: (max1111) Change sysfs interface to in[0-3]_input in millivolts

This patch fixed the inconsistent max1111 sysfs interface as pointed
out by Jean Delvare:

    It was pointed to me that the max1111 driver doesn't implement the
    standard sysfs interface for hwmon drivers (as described in
    Documentation/hwmon/sysfs-interface). It exports files adc[0-3]_in,
    which
    aren't part of the standard interface. Presumably these should be
    renamed to in[0-3]_input. Renaming them is probably not sufficient
    though, as I see no scaling done in the driver. As the MAX1111 chip has
    a documented full scale of 2.048V, I take it that the LSB of the ADC
    has a weight of 8 mV. Exporting raw register values to user-space is
    not OK.
Reported-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

drivers/hwmon/max1111.c

@@ -106,11 +106,14 @@ static ssize_t show_adc(struct device *dev,
 	if (ret < 0)
 		return ret;
 
-	return sprintf(buf, "%d\n", ret);
+	/* assume the reference voltage to be 2.048V, with an 8-bit sample,
+	 * the LSB weight is 8mV
+	 */
+	return sprintf(buf, "%d\n", ret * 8);
 }
 
 #define MAX1111_ADC_ATTR(_id)		\
-	SENSOR_DEVICE_ATTR(adc##_id##_in, S_IRUGO, show_adc, NULL, _id)
+	SENSOR_DEVICE_ATTR(in##_id##_input, S_IRUGO, show_adc, NULL, _id)
 
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 static MAX1111_ADC_ATTR(0);
@@ -120,10 +123,10 @@ static MAX1111_ADC_ATTR(3);
 
 static struct attribute *max1111_attributes[] = {
 	&dev_attr_name.attr,
-	&sensor_dev_attr_adc0_in.dev_attr.attr,
-	&sensor_dev_attr_adc1_in.dev_attr.attr,
-	&sensor_dev_attr_adc2_in.dev_attr.attr,
-	&sensor_dev_attr_adc3_in.dev_attr.attr,
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
 	NULL,
 };