Commit 016afda4 authored by Hans Verkuil's avatar Hans Verkuil Committed by Mauro Carvalho Chehab

[media] solo6x10: fix various format-related compliancy issues

- try_fmt should never return -EBUSY.
- invalid pix->field values were not mapped to a valid value.
- the priv field of struct v4l2_pix_format wasn't zeroed.
- the try_fmt error code was not checked in set_fmt.
- enum_framesizes/intervals is valid for both MJPEG and MPEG pixel formats.
- enum_frameintervals didn't check width and height and reported the
  wrong range.
- s_parm didn't set readbuffers.
- don't fail on invalid colorspace, just replace with the valid colorspace.
- bytesperline should be 0 for compressed formats.
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent c813bd3c
......@@ -1039,13 +1039,6 @@ static int solo_enc_try_fmt_cap(struct file *file, void *priv,
pix->pixelformat != V4L2_PIX_FMT_MJPEG)
return -EINVAL;
/* We cannot change width/height in mid mpeg */
if (atomic_read(&solo_enc->mpeg_readers) > 0) {
if (pix->width != solo_enc->width ||
pix->height != solo_enc->height)
return -EBUSY;
}
if (pix->width < solo_dev->video_hsize ||
pix->height < solo_dev->video_vsize << 1) {
/* Default to CIF 1/2 size */
......@@ -1057,14 +1050,20 @@ static int solo_enc_try_fmt_cap(struct file *file, void *priv,
pix->height = solo_dev->video_vsize << 1;
}
if (pix->field == V4L2_FIELD_ANY)
pix->field = V4L2_FIELD_INTERLACED;
else if (pix->field != V4L2_FIELD_INTERLACED)
switch (pix->field) {
case V4L2_FIELD_NONE:
case V4L2_FIELD_INTERLACED:
break;
case V4L2_FIELD_ANY:
default:
pix->field = V4L2_FIELD_INTERLACED;
break;
}
/* Just set these */
pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
pix->sizeimage = FRAME_BUF_SIZE;
pix->priv = 0;
return 0;
}
......@@ -1081,6 +1080,15 @@ static int solo_enc_set_fmt_cap(struct file *file, void *priv,
mutex_lock(&solo_enc->enable_lock);
ret = solo_enc_try_fmt_cap(file, priv, f);
if (ret)
return ret;
/* We cannot change width/height in mid read */
if (!ret && atomic_read(&solo_enc->readers) > 0) {
if (pix->width != solo_enc->width ||
pix->height != solo_enc->height)
ret = -EBUSY;
}
if (ret) {
mutex_unlock(&solo_enc->enable_lock);
return ret;
......@@ -1116,6 +1124,7 @@ static int solo_enc_get_fmt_cap(struct file *file, void *priv,
V4L2_FIELD_NONE;
pix->sizeimage = FRAME_BUF_SIZE;
pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
pix->priv = 0;
return 0;
}
......@@ -1205,7 +1214,8 @@ static int solo_enum_framesizes(struct file *file, void *priv,
struct solo_enc_fh *fh = priv;
struct solo_dev *solo_dev = fh->enc->solo_dev;
if (fsize->pixel_format != V4L2_PIX_FMT_MPEG)
if (fsize->pixel_format != V4L2_PIX_FMT_MPEG &&
fsize->pixel_format != V4L2_PIX_FMT_MJPEG)
return -EINVAL;
switch (fsize->index) {
......@@ -1232,16 +1242,24 @@ static int solo_enum_frameintervals(struct file *file, void *priv,
struct solo_enc_fh *fh = priv;
struct solo_dev *solo_dev = fh->enc->solo_dev;
if (fintv->pixel_format != V4L2_PIX_FMT_MPEG || fintv->index)
if (fintv->pixel_format != V4L2_PIX_FMT_MPEG &&
fintv->pixel_format != V4L2_PIX_FMT_MJPEG)
return -EINVAL;
if (fintv->index)
return -EINVAL;
if ((fintv->width != solo_dev->video_hsize >> 1 ||
fintv->height != solo_dev->video_vsize) &&
(fintv->width != solo_dev->video_hsize ||
fintv->height != solo_dev->video_vsize << 1))
return -EINVAL;
fintv->type = V4L2_FRMIVAL_TYPE_STEPWISE;
fintv->stepwise.min.numerator = solo_dev->fps;
fintv->stepwise.min.denominator = 1;
fintv->stepwise.min.denominator = solo_dev->fps;
fintv->stepwise.min.numerator = 15;
fintv->stepwise.max.numerator = solo_dev->fps;
fintv->stepwise.max.denominator = 15;
fintv->stepwise.max.denominator = solo_dev->fps;
fintv->stepwise.max.numerator = 1;
fintv->stepwise.step.numerator = 1;
fintv->stepwise.step.denominator = 1;
......@@ -1298,6 +1316,7 @@ static int solo_s_parm(struct file *file, void *priv,
solo_enc->interval = cp->timeperframe.numerator;
cp->capability = V4L2_CAP_TIMEPERFRAME;
cp->readbuffers = 2;
solo_update_mode(solo_enc);
......
......@@ -34,8 +34,6 @@
#include "solo6x10.h"
#include "tw28.h"
#define SOLO_DISP_PIX_FIELD V4L2_FIELD_INTERLACED
/* Image size is two fields, SOLO_HW_BPL is one horizontal line in hardware */
#define SOLO_HW_BPL 2048
#define solo_vlines(__solo) (__solo->video_vsize * 2)
......@@ -439,7 +437,7 @@ static int solo_v4l2_open(struct file *file)
videobuf_queue_dma_contig_init(&fh->vidq, &solo_video_qops,
&solo_dev->pdev->dev, &fh->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
SOLO_DISP_PIX_FIELD,
V4L2_FIELD_INTERLACED,
sizeof(struct videobuf_buffer),
fh, NULL);
return 0;
......@@ -581,23 +579,16 @@ static int solo_try_fmt_cap(struct file *file, void *priv,
struct v4l2_pix_format *pix = &f->fmt.pix;
int image_size = solo_image_size(solo_dev);
/* Check supported sizes */
if (pix->width != solo_dev->video_hsize)
pix->width = solo_dev->video_hsize;
if (pix->height != solo_vlines(solo_dev))
pix->height = solo_vlines(solo_dev);
if (pix->sizeimage != image_size)
pix->sizeimage = image_size;
/* Check formats */
if (pix->field == V4L2_FIELD_ANY)
pix->field = SOLO_DISP_PIX_FIELD;
if (pix->pixelformat != V4L2_PIX_FMT_UYVY ||
pix->field != SOLO_DISP_PIX_FIELD ||
pix->colorspace != V4L2_COLORSPACE_SMPTE170M)
if (pix->pixelformat != V4L2_PIX_FMT_UYVY)
return -EINVAL;
pix->width = solo_dev->video_hsize;
pix->height = solo_vlines(solo_dev);
pix->sizeimage = image_size;
pix->field = V4L2_FIELD_INTERLACED;
pix->pixelformat = V4L2_PIX_FMT_UYVY;
pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
pix->priv = 0;
return 0;
}
......@@ -624,10 +615,11 @@ static int solo_get_fmt_cap(struct file *file, void *priv,
pix->width = solo_dev->video_hsize;
pix->height = solo_vlines(solo_dev);
pix->pixelformat = V4L2_PIX_FMT_UYVY;
pix->field = SOLO_DISP_PIX_FIELD;
pix->field = V4L2_FIELD_INTERLACED;
pix->sizeimage = solo_image_size(solo_dev);
pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
pix->bytesperline = solo_bytesperline(solo_dev);
pix->priv = 0;
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment