Commit 029fb7c2 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'uniphier-dt64-v4.14' of...

Merge tag 'uniphier-dt64-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64

Pull "UniPhier ARM64 SoC DT updates for v4.14" from Masahiro Yamada:

- add nodes for NAND, Watchdog
- replace /include/ with #include
- use #include <arm/...> instead of symlinks

* tag 'uniphier-dt64-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add Denali NAND controller nodes
  arm64: dts: uniphier: use cross-arch include instead of symlinks
  arm64: dts: uniphier: use #include instead of /include/
  arm64: dts: uniphier: add watchdog node for LD11 and LD20
parents 23f8f601 e5aefb38
......@@ -9,7 +9,7 @@
*/
/dts-v1/;
/include/ "uniphier-ld11.dtsi"
#include "uniphier-ld11.dtsi"
/ {
model = "UniPhier LD11 Global Board (REF_LD11_GP)";
......@@ -68,3 +68,7 @@ &usb1 {
&usb2 {
status = "okay";
};
&nand {
status = "okay";
};
......@@ -8,9 +8,9 @@
*/
/dts-v1/;
/include/ "uniphier-ld11.dtsi"
/include/ "uniphier-ref-daughter.dtsi"
/include/ "uniphier-support-card.dtsi"
#include "uniphier-ld11.dtsi"
#include "uniphier-ref-daughter.dtsi"
#include "uniphier-support-card.dtsi"
/ {
model = "UniPhier LD11 Reference Board";
......
......@@ -367,8 +367,23 @@ sys_rst: reset {
compatible = "socionext,uniphier-ld11-reset";
#reset-cells = <1>;
};
watchdog {
compatible = "socionext,uniphier-wdt";
};
};
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
clocks = <&sys_clk 2>;
};
};
};
/include/ "uniphier-pinctrl.dtsi"
#include "uniphier-pinctrl.dtsi"
......@@ -9,7 +9,7 @@
*/
/dts-v1/;
/include/ "uniphier-ld20.dtsi"
#include "uniphier-ld20.dtsi"
/ {
model = "UniPhier LD20 Global Board (REF_LD20_GP)";
......@@ -50,3 +50,7 @@ &serial1 {
&i2c0 {
status = "okay";
};
&nand {
status = "okay";
};
......@@ -8,9 +8,9 @@
*/
/dts-v1/;
/include/ "uniphier-ld20.dtsi"
/include/ "uniphier-ref-daughter.dtsi"
/include/ "uniphier-support-card.dtsi"
#include "uniphier-ld20.dtsi"
#include "uniphier-ref-daughter.dtsi"
#include "uniphier-support-card.dtsi"
/ {
model = "UniPhier LD20 Reference Board";
......
......@@ -388,8 +388,23 @@ sys_rst: reset {
compatible = "socionext,uniphier-ld20-reset";
#reset-cells = <1>;
};
watchdog {
compatible = "socionext,uniphier-wdt";
};
};
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
clocks = <&sys_clk 2>;
};
};
};
/include/ "uniphier-pinctrl.dtsi"
#include "uniphier-pinctrl.dtsi"
../../../../arm/boot/dts/uniphier-pinctrl.dtsi
\ No newline at end of file
#include <arm/uniphier-pinctrl.dtsi>
../../../../arm/boot/dts/uniphier-ref-daughter.dtsi
\ No newline at end of file
#include <arm/uniphier-ref-daughter.dtsi>
../../../../arm/boot/dts/uniphier-support-card.dtsi
\ No newline at end of file
#include <arm/uniphier-support-card.dtsi>
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment